Wyniki wyszukiwania: honey

Sortowanie

5370 modeli

P
PrintablesRostaP

Honeycomb storage wall

News March 20, 2022 added bigger hook March 21, 2022 added USB flash drive holder March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw) March 21, 2022 added box (screwed with M4x10 screw) March 21, 2022 added 2 wall parts…

Pobrania
286 190
Polubienia
62 675
Ocena
4,93

Honey Comb Screwdriver Holder Screw Mount Remix

I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…

Pobrania
3452
Polubienia
552
Ocena
4,73
P
PrintablesJirka

Large screwdriver holder with honeycomb pattern

Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…

Pobrania
3040
Polubienia
878
Ocena
4,8
P
PrintablesSpatula

Honeycomb 3M Command Strip Mount + Wall Double Hollow Insert

I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…

Pobrania
2401
Polubienia
602
Ocena
5
P
Printablessmdollins

HSW Honeycomb Storage Box

A simple box for some added storage on your Honeycomb Storage Wall. Walls and base are all hard-modeled with the honeycombs, so no need to tweak print settings to get the honeycomb right. I printed with 4 perimeters to add some strength…

Pobrania
1880
Polubienia
358
Ocena
4,82
P
PrintablesBull3t

Geared Smartphone Holder with honeycomb bottom

I remixed SchuMaker's Smartphone Holder Design with honeycomb on the bottom part. Just filled the hole on the bottom with fusion360 and added a modifier to remove top and bottom layers.

Pobrania
1719
Polubienia
290
Ocena
5
P
PrintablesGCV3D

Honeycomb Vase (Vase Mode)

Overview This honeycomb vase can serve as a great decorative vase or pencil holder. It is designed to be scalable and printed in vase mode, so if you resize the model just make sure you're printing in vase mode. Printing No supports…

Pobrania
1694
Polubienia
183
Ocena
4,92
P
Printablespick_nicker

Prusa Mini Front Plate Hexagon/HoneyComb Insets

I recently got my Prusa Mini+. After printing some addons, I searched for something to highlight the hexagons in the front plate. Since I couldn't find exactly what I wanted, I created these little insets in tinkercad. On my front plate,…

Pobrania
1451
Polubienia
409
Ocena
4,9
P
Printableswrkyle

Honeycomb Bookend (reinforced)

A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…

Pobrania
1273
Polubienia
187
Ocena
4,88
P
Printablesrahix

Honey Comb Screwdriver Holder Screw Mount Improved

A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…

Pobrania
1242
Polubienia
318
Ocena
5
P
PrintablesTrajan

Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)

This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…

Pobrania
1083
Polubienia
132
Ocena
4,86
P
PrintablesCJ I.

Honeycomb Tool Boxes for Prusa Mini(+)

Remixed tool boxes to include honeycomb styling that easily mount in the Prusa Mini rails. Can also be quickly removed for easier access to all your tools. There are two variants of these tool boxes, one is large and one is small. The…

Pobrania
756
Polubienia
262
Ocena
4,94
P
PrintablesElectroHawk

Stacked Honeycomb part for FDM

I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…

Pobrania
634
Polubienia
102
Ocena
5
P
PrintablesH3dSprint

Honeycomb wall - end piece

Honeycomb wall end pieces are printed with PETG and do not need supports. To avoid issues due to warping, I recommend to print the parts in an enclosure. 2 end pieces + 1 original wall have a width of 544 mm. The assembled honeycomb wall…

Pobrania
529
Polubienia
167
Ocena
5

Honeybee Chip Clip

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Recommended to print with 4 walls, Color change at 9.2mm…

Pobrania
528
Polubienia
114
Ocena
5
P
Printablesbazhenovc

Honeycomb MTG card dividers with all mana color combinations

A parametric MTG card divider with mana symbols. Included STL files have all 32 mana combinations (in the correct official color order) and are ready to print. No supports required, I also printed without build plate adhesion layer. Uses…

Pobrania
516
Polubienia
72
Ocena
4

Acrylic paint holder for Honeycomb storage wall

acrylic paint holder both cover and insert

Pobrania
514
Polubienia
123
Ocena
5
P
Printablesdevdrik

Honeycomb Ikea Skadis pegboard hook for cables, scissors and more, all hex, parametric

This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like cables, scissors, precision pliers and probably many more. It is part of my honycomb skadis collection. It has a hex shaped pin to…

Pobrania
511
Polubienia
71
Ocena
4,56
P
PrintablesTrajan

Honeycomb Wall PS5 Controller Mount

I remixed this good looking mount, added logos, Honeycomb wall mounts and a cable holder underneath. I don't like the cable holder all that much (it works but just not great) and may take it out of V2. I hope you enjoy it. Recommend…

Pobrania
476
Polubienia
107
Ocena
5
P
Printablespino1021

Honeycomb Notebook Stand (large version)

This is an lenght increased version of the really nice laptop stand from WestInSpace. It works perfect on my 15' HP Envy. Print settings I used: 3 Perimeter 0.2mm layerhight 15% Gyroid infill Sunlu PLA Matte Black This gives a total…

Pobrania
453
Polubienia
37
Ocena
5
P
PrintablesMr.CheeseStick

Hexagon Honeycomb Phone Case (For iphone 13 regular size)

I took the iphone 13 design and added a hexagonal pattern to the back.

Pobrania
426
Polubienia
18
Ocena
5

5-Inch Honey Comb Coaster

I designed this simple coaster as an example of how I make honeycomb patterns in Fusion 360 for a YouTube video which you can view below. This coaster is 5-inches in diameter with a 0.25-inch solid border and is 0.25-inches thick. It…

Pobrania
400
Polubienia
26
Ocena
0
P
PrintablesTurbopstros

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Pobrania
385
Polubienia
50
Ocena
5
P
Printableswubbr

Ikea Skådis big screwdriver holder, honeycomb pattern / Velký držák na šroubováky pro Skadis

Remix I really liked @Jirka_4226633 's model Big screwdriver holder, honeycomb pattern (Děkuju) but I wanted to put it on my IKEA SKÅDIS wall. If you like this model please also like the original as Jirka did most of the work. This…

Pobrania
358
Polubienia
119
Ocena
5
P
Printableshrrossi
Pobrania
357
Polubienia
148
Ocena
5
P
PrintablesGorto

Logitech K400+ Keyboard Holder for Honeycomb Alpha Yoke

I have very little space where I fly my flight sim. The Honeycomb Alpha Yoke already took out a large chunk of my desk space, there is no place to put my keyboard which is a small Logitech K400+. An underdesk keyboard drawer is not…

Pobrania
352
Polubienia
62
Ocena
4,67
P
PrintablesJW Designs

Honeycomb Bee Earrings

Hexagon Honeycomb Bee Earrings with color change.🐝 A pair of bees sat on a round disk of honeycomb made of hexagons, perfect for nature lovers and bee enthusiasts! Has a hexagon loop at the top for easy attachment to your preferred…

Pobrania
349
Polubienia
93
Ocena
5
P
Printablesncsandor

Honeycomb Wall Keyboard Holder - Support-free Remix

Print Tips The normal size version should be fine for most average keyboards. Can add two small (10mm diameter) helper discs to the model in the slicer (as shown in the attached 3mf file) so we can be more relaxed about printing.…

Pobrania
340
Polubienia
54
Ocena
5
P
Printablespejvl2000

Tissue box for Honeycomb storage wall

K montáži použijte 4 ks šroubů se zápustnou hlavou M3x8 a 2 ks matic M3 .

Pobrania
326
Polubienia
133
Ocena
5
P
PrintablesJohnD920

IFixit Mako Driver Kit Holder for Honeycomb storage wall

I wanted to place my Ifixit Mako driver kit to my honeycomb storage wall so I designed this holder.

Pobrania
294
Polubienia
62
Ocena
5
P
Printablesabarsan

Honeycomb Lampshade

I used white PLA and printed it on the Ender 3. Bed temperature: 60 Nozzle temperature: 205 Infill: 20%

Pobrania
264
Polubienia
85
Ocena
0
P
PrintablesJoshPlayz

Pull Station | Fire Alarm | Notifier by Honeywell

fire alarm I made when I was bored and had a lot of freetime

Pobrania
252
Polubienia
15
Ocena
0
P
PrintablesKiloxTango

Floating Shelf Adapter for Honeycomb Storage Wall

Honeycomb wall storage floating shelf adapter to be used with: https://www.printables.com/model/152592-honeycomb-storage-wall Print Settings: Layer height: .2 Perimeter: 4 Infill: 25% I used gyroid Supports: I drew on supports for the…

Pobrania
242
Polubienia
139
Ocena
5
P
PrintablesRPK

Honeycomb structure remix

Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…

Pobrania
241
Polubienia
17
Ocena
0
P
PrintablesSi1verEag1e

Simple Honeycomb Note box / Memobox / Zettelbox

Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor. Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers.…

Pobrania
238
Polubienia
34
Ocena
4,5
P
PrintablesC Model

Honeycomb Drawer Divider

Furthermore, explore my alternative model: https://www.printables.com/model/638685-divider-diy-storage Suggested print settings: No supports are needed but follow the suggested print orientation for ideal results. "Honeycomb Drawer…

Pobrania
232
Polubienia
100
Ocena
0
P
PrintablesINSANEWAVE

Honeycomb Wall Mounting Without Screws REINFORCED

I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…

Pobrania
222
Polubienia
54
Ocena
5
P
Printablesmarty79

Magnetic insert for honeycomb wall

My printing settings for all inserts layer height: 0.2 perimeters: 4 infil: 20% Magnet 10x10x5 mm from: silnemagnety.cz aliexpres 23.8.2022 added .f3d model

Pobrania
209
Polubienia
56
Ocena
0
P
PrintablesExceeder

Honeycomb HSW Hidden Magnet Mount for three 6mm x whatever magnets

Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…

Pobrania
204
Polubienia
45
Ocena
5
P
PrintablesDirk2303

Penholder Honeycomb

Ich habe das Teil in Fusion, für mein Kind, Konstruiert damit endlich Ordnung herrscht auf dem Schreitisch. 128 Stifte passen rein mit einem maximalen Durchmesser von 13mm. Die Waben sind 60mm tief.

Pobrania
164
Polubienia
28
Ocena
0
P
PrintablesCJ I.

Honeycomb Front Plate for Prusa Mini

Remix of Prusa Mini Honeycomb Plate by EduardoG . I really liked this design, but I noticed the file had an error where one of the cutouts goes too deep and creates a hole where the LCD screen mounts. I modified the file to fix this, then…

Pobrania
161
Polubienia
44
Ocena
5
P
PrintablesJirka

Screwdriver holder for table, honeycomb pattern

The height can be adjusted to match the length of your instrument. Current height = 105 mm Hex size is 9mm Material PETG or PCTG. Rough surface mode is used. If you don't like it, you can turn it off.

Pobrania
158
Polubienia
35
Ocena
0
P
Printablestbk

Air quality lamp for CO2 metering (MH-Z19, esp32 and neopixel) with honeycombshell

The Senosor became too hot on the first model despite the honeycomb on the lid. For this reason, I also had to design the outer wall with honeycomb. Now there is no heat problem in the housing and the sensor measures the content of CO2 in…

Pobrania
157
Polubienia
40
Ocena
3
P
PrintablesAllpa

Bee in Honeycomb 3D Wallart // Biene in Honigwabe 3D Wandkunst

3D wall art "Bee in honeycomb" in multicolor printing. Parts can be printed all separately and glued together, or printed completely multicolor (bee and background separately). The bee is stylized as a lowpoly design and raised with…

Pobrania
146
Polubienia
31
Ocena
5
P
PrintablesDaTTcz

HEXA podtácky se vzorem plástve (HEXA Coaster with honeycomb pattern) - OpenSCAD parametrizable

Nastavitelné parametry umožnují přizpůsobení modelu. Upgrade: v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html

Pobrania
144
Polubienia
20
Ocena
5
P
PrintablesSuper7

Honeycomb Storage Wall - Combination Square Holder - Lufkin ProSlide

Honeycomb Storage Wall - Combination Square Holder - Lufkin ProSlide

Pobrania
138
Polubienia
56
Ocena
0
P
Printablesplempicki

Skincare organizer - The Ordinary honeycomb

Simple organizer for eight 30ml bottles.

Pobrania
135
Polubienia
16
Ocena
0
P
PrintablesRobin

Segmented box with spout and lid for honeycomb storage wall system (HSW)

Segmented box with spout (front only) and lid for honeycomb storage wall system (HSW). I use this for my filament clips but it's good for any small objects. It needs two “empty-insets” to be fixed to the HSW. The hinge parts are quite…

Pobrania
121
Polubienia
17
Ocena
0
P
PrintablesSamansi

Honeycomb Door Stopper

Printer: Prusa MK3 Material: PLA Infill: 15% Time: 3h 36 Support: No

Pobrania
95
Polubienia
10
Ocena
5
P
PrintablesKurodo

S20 cover with Honeycomb design

When using the STL file with your slicer, in the ‘Print Setting/Horizontal shells’ tab, set the top and bottom layers to 0. You can also change the 'Infill/Fill pattern' to your choice (except Concentric that will not really protect your…

Pobrania
92
Polubienia
11
Ocena
0
P
PrintablesPopCornTators

xtool honeycomb corner alignment and risers

I took the xtool honeycomb riser by cbabbman and increased the thickness and size so that it would have a better hold on the honeycomb panel and also slightly increased the gap between the honeycomb and the stainless plate and increased…

Pobrania
90
Polubienia
12
Ocena
0
P
PrintablesThunderArtist

DeepCool Matrexx 50 Mesh Honeycomb Front Panel

Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…

Pobrania
83
Polubienia
2
Ocena
0
P
Printables3dptrk

Honeycomb Desk Organizer

This model is the perfect companion for any desk. Hold all your office items in one place. Even has wire management. Printing: .2 Layer height 15-20% Infill *Supports for build plate only. * You can probably print without supports, better…

Pobrania
79
Polubienia
17
Ocena
0
P
Printablesedmar

Cable - Nylon lock holder - Honeycomb storage wall - STEP files

Cable - Nylon lock holder - Honeycomb storage wall - STEP files

Pobrania
76
Polubienia
10
Ocena
0
P
PrintablesF4B1

Honeycomb storage wall - Hex nut wall mount

Remixed the insert to attach the HSW on threaded M5 rods

Pobrania
64
Polubienia
17
Ocena
0
P
PrintablesShawinkle

Honeycomb tablet stand - remix / Support tablette en nid d'abeilles - modifié

Slightly improved version to put anti-slip pads. I love this tablet stand. It's really easy to print (I printed it vertically). I lacked places to glue anti-slip pads. Now it is possible with 10mm slots. - - - Version légèrement améliorée…

Pobrania
64
Polubienia
4
Ocena
0
P
PrintablesTrajan

Bling Ring - Insert for Honeycomb wall spool mount

I made this “bling ring” to fit into the end of the Honeycomb Wall Spool Storage mount. This was originally designed so that you could print the “bling ring” in the color of the filament that was hanging on the hook for a quick reference.…

Pobrania
61
Polubienia
20
Ocena
5
P
PrintablesLukasZat

Honeycomb storage wall- Headphone holder

Headphone holder for your honeycomb storage wall. If you want to check the honeycomb storage wall then go to: https://www.printables.com/model/152592-honeycomb-storage-wall If you like my model, please be so kind as to upload your own and…

Pobrania
60
Polubienia
10
Ocena
5
P
Printablesls6

Honeycomb wall (HCW) for Prusa Mini Enclosure

Update I'm removing the part for the left wall. I have noticed that the holes in the walls of the enclosure are not symmetrical. I have used a hole for the spool holder which does not exist on the left wall. Mounting You will need at…

Pobrania
46
Polubienia
8
Ocena
5
P
Printableshoco

Honey Bottle Transfer Fitting

This allows you to attach two honey bottles so the contents of one can flow into the other without making a mess. It has arrows around the outside to indicate which direction should be placed downwards. The inside is designed to keep the…

Pobrania
44
Polubienia
5
Ocena
0
P
PrintablesMais ThreeD

Honeycomb Book Stand with Changable Decoration

The uploaded modell includes a tea candle holder. Additionally, we upload the adapter itself, so you can remix your favorite decoration item (Printables is full of nice modells) to combine it with the book stand. We also uploaded the book…

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesGbarneby

BGS (Beckett) HoneyComb Wall Card Stand

I use the PSA / Beckett card stands a lot for my display cards in my office, but I am in the process of printing a honeycomb wall for my office and as this is a playing card rather than a TCG card it doesn't quite fit with the rest of my…

Pobrania
39
Polubienia
2
Ocena
0
P
PrintablesSpinningHat

Honeycomb Storage Wall UE Wonderboom Holder

I needed a holder for my UE Wonderboom to mount to my HSW storage system. Found the Skadis mount, and modified to it fit the HSW. Printed in PETG. I used print bed supports, 4 perimeters, and 25% infill. Seems to hold the speaker very…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesJP3D

Deodorant Holder Honeycomb

Deodorant sticks/rollers are frustrating when they are nearly empty. This print holds round deo sticks upside down, so they can be used instantly and even when nearly empty. Brands like Nivea, 8x4, Fa, Balea and many others will fit.…

Pobrania
33
Polubienia
6
Ocena
0
P
PrintablesRPK

Honeycomb structure knobs

EN: Long in my head, now finally realized. Holders for the honeycomb-structure-remix , or the grid and the holder . The hexagons are intentionally relatively precise so that the “buttons” adhere well to the honeycomb structure. This might…

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesKidvolution

Honey Gate Valve / Squeeze Tap for Honey & Thick Liquids – No Supports // Quetschhahn Honig & dickflüssige Medien – kein Support

## About this model This is a 3D-printable redesign of an original honey gate valve, the kind used by beekeepers to tap honey from buckets and containers. I fully re-modeled the original part and reworked several areas specifically so…

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesMatteo1996

HoneyGuaridan A68 Container Cap Block

Replacement part for food dispenser HoneyGuaridan A28 (Code model: HG-A28D), Print only in PET/PETG for flexibility.

Pobrania
24
Polubienia
3
Ocena
5
P
Printablesdym801

Honeycomb Wall USB-A, USB-C, SD, and Micro SD holder (Remix)

One small holder to handle your storage needs to your hexwall

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesSnejx

Sensory play - Honeycomb

Bee comb This sensory game with a bee hive promotes fine motor skills when scooping and pouring rice, lentils, or other materials. It develops awareness of differences between materials and helps children learn to sort, count, and compare…

Pobrania
21
Polubienia
35
Ocena
0
P
PrintablesTeTeHacko

MK4 pg cover with honeycomb

Prusa MK4 pg cover with honeycomb, made from two separate parts glued together

Pobrania
16
Polubienia
1
Ocena
0

Tray for two glasses of honey / Tác pod dvě sklenice medu

EN: Are you also tired of shelves stained with honey dripping down the glass? If so, then you are my target group. The plate can be used for two glasses with an outer diameter of max. 100 mm and can also be printed on small printers such…

Pobrania
13
Polubienia
6
Ocena
5
P
PrintablesLukeHodde

Qube 540 to Honeycomb Storage Wall adapter

Follow standard Honeycombwall printing advice. 0.2mm layer height 3-4 perimeters 15-20% infill I printed in Polymaker PLA Pro.

Pobrania
11
Polubienia
8
Ocena
0
P
PrintablesPiotrS

LC-E6 Mount for Honeycomb Storage Wall

I created a simple holder for Canon LP-E6/N/NH battery charger - LC-E6E. To be used with great Honeycomb Storage wall from RostaP (https://makerworld.com/en/models/22521). Mounting knobs are inspired by H2 by KYZ Design. Easily printable…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesFokieH

Wera MicroBit MagDock - for Desktop, Skadis & Honeycomb

Hier ein Halter für das Wera Micro-Bit-System. Die Bits werden magnetisch auf ihrem Platz gehalten und im unteren Teil ist noch eine kleine Ablage integriert wo kleine Schrauben abgelegt und ebenfalls magnetisch festgehalten werden. So…

Pobrania
0
Polubienia
1
Ocena
0

Honey Comb Wall remixes and introducing my Screw Wall!!!

Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…

Pobrania
42 884
Polubienia
16 006
Ocena
4,94
P
PrintablesRyan Millar

Honeycomb Display Shelf (No Supports Required)

Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…

Pobrania
33 771
Polubienia
17 587
Ocena
4,94
P
PrintablesJan Štech

Simple Honeycomb Mobile Stand

Simple Honeycomb Mobile Stand Consists of two parts that you can optionally print in different colors. The stand offers two settings – depending on how you insert the parts together, you can adjust the angle of the stand. Charge your…

Pobrania
18 842
Polubienia
4160
Ocena
4,92
P
PrintablesWireheadarts

OpenSCAD Parameterized Honeycomb Storage Wall

I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…

Pobrania
11 252
Polubienia
1446
Ocena
4,88
P
Printables2be3dprinted

Shelf support bracket Honeycomb Hexagon

Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…

Pobrania
11 240
Polubienia
5878
Ocena
4,96
P
PrintablesXander

Customizable Honeycomb Storage Wall (OpenSCAD)

Customizable OpenSCAD version of the Honeycomb Storage Wall that allows creation of custom grid sizes and irregular shapes. About OpenSCAD OpenSCAD is a free software that facilitates parametric 3D modeling. If you are unfamiliar with…

Pobrania
10 392
Polubienia
1022
Ocena
4,93
P
PrintablesExtrutim

Honeycomb Shelf Bracket - Scalable

A simple shelf bracket with a honeycomb pattern! Here you can find two more designs I made from this shelf bracket. 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket. The holes have a diameter of…

Pobrania
10 145
Polubienia
2200
Ocena
4,9
P
PrintablesWaldmops

Honeycomb storage wall with borders

Honeycomb storage wall with borders for mk3/4 size.

Pobrania
8784
Polubienia
2185
Ocena
5
P
PrintablesMajrooo

Stackable Crate Plus - Honeycomb Edition

Organize your workspace like a pro! This upgraded Honeycomb Edition of the Stackable Crate Plus combines structural strength with a modern aesthetic, optimized specifically for 3D printing. Key Features: Perfectly Stackable: Designed for…

Pobrania
8478
Polubienia
2036
Ocena
4,97
P
PrintablesMartin Šlefr

Hexagon (Honeycomb) Sliding Fidget Toy

Fun toy to play with. Hexagon columns jointed together can slide up and down. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on photos was printed with Bambu Lab…

Pobrania
8089
Polubienia
583
Ocena
4,35
P
PrintablesKYZ Design

Easy Print Super Strong Hook - Single Piece - No Screws - No Supports - HSW Honeycomb Storage Wall

Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…

Pobrania
8082
Polubienia
1621
Ocena
4,83
P
PrintablesEdwin Eefting

Customizable Honeycomb Storage Wall (OpenSCAD) v2.1 Bambulabs

update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…

Pobrania
8017
Polubienia
580
Ocena
4,88
P
PrintablesRomeba

Foldable Honeycomb Phone Stand

¿Quieres un soporte para teléfono móvil simple y fácil de imprimir? Presentamos: el soporte plegable para teléfono en forma de nido de abeja. Este soporte de impresión in situ también se puede imprimir en piezas separadas para una…

Pobrania
7949
Polubienia
1385
Ocena
4,66
P
PrintablesKYZ Design

HSW Single Walls - With Integrated Frame and Fastening Points (Honeycomb Storage Wall)

Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…

Pobrania
7471
Polubienia
1544
Ocena
4,98
P
PrintablesBemko

Honeycomb lamp shade

A remix of the honeycomb lamp shade ( https://www.thingiverse.com/thing:3175389 ) resized to a 120mm base diameter. It has an additional surface at the bottom for easier mounting to a wooden base with a lightbulb socket. Alternatively you…

Pobrania
7275
Polubienia
1748
Ocena
5
P
PrintablesJodameister

Insert Remover - Honeycomb Wall (HSW)

When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed. So I designed a removal tool. Stick the tool in the inner hex from…

Pobrania
6787
Polubienia
1360
Ocena
4,8

Honeycomb tool organizer

Honeycomb shaped organizer Outer dimensions: width: 169mm depth: 152.5mm height: 102mm Max object size: Round: up to 47mm diameter flat: up to 52mm width (spatula…) Wall thickness: 2.5mm Featured in Prusa's Weekly Prints #54

Pobrania
6428
Polubienia
1164
Ocena
4,98
P
PrintablesAikoly

Filament Sample Spool (honeycomb)

This is a spool for 50-100g 1.75mm filament samples such as the ones included in MakerBox subscriptions (version A also fits the original zipper bags) ;) I have also included a spool for 150-200g 1.75mm filaments such as cleaning and high…

Pobrania
5818
Polubienia
836
Ocena
4,91
P
PrintablesCoffeePrintDE

Honeycomb Wall SV06

This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size. The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the…

Pobrania
5791
Polubienia
675
Ocena
5
P
PrintablesDrew Singer

Honeycomb Storage Wall (HSW) Shelf

This is a shelf and shelf support and for the Honeycomb Storage Wall (HSW). The shelf is a the standard wall-honeycomb-part.stl with side walls added. Please note that some of the honeycombs that may look complete on the shelf supports…

Pobrania
5280
Polubienia
1821
Ocena
4,89
P
PrintablesSLIMPRINT

Honeycomb Pencil Holder

A Pencil Holder with a honeycomb texture. Print time:5 - 7 hours at 100% scale (depending on settings) Dimensions: 7 x 9 cm (diameter x height) Weight: 42 grams Tip: try to calibrate your retraction settings before printing for the best…

Pobrania
5239
Polubienia
525
Ocena
5
P
PrintablesChristian

Floating Honeycomb Display Shelves

Remix to remove the top half of the back honeycomb to give a 'floating' look and to double the stability while hiding the nails better Print one frame piece and two side grills (Preferably in an accent color) Don't forget to resize the…

Pobrania
5207
Polubienia
1867
Ocena
4,92
P
PrintablesSimone F.

Honeycomb wall standard rectangular border

UPDATE 16/01/2024: i've noticed there were a gap of ½ hex… sorry if you already printed the ANGLE A, it need to be re-printed with the fixed versione i've uploaded. UPDATE 16/02/2024: added folder with other filler size, in case you are…

Pobrania
5205
Polubienia
2075
Ocena
4,82
P
PrintablesWeazelbuffer

Borders for Honeycomb storage wall

Border pieces for the fantastic Honeycomb storage wall to give a “crisp” look to the edges. The pieces were designed with the mk3s base file ( wall-honeycomb-224x190sizemk3s.stl ). The models needed depend on the number of panels you're…

Pobrania
4949
Polubienia
1273
Ocena
4,75
P
PrintablesMILITECH

Q Honey Badger – Pocket Rifle Fidget Toy

Commercial licence Want to sell physical prints? A commercial license is available through my Full Arsenal membership on Patreon. Explore Full Arsenal & commercial licensing → Printing for yourself? Enjoy the model, and visit my Patreon…

Pobrania
4919
Polubienia
1599
Ocena
4,9
P
Printablesrace85com

HSW Filament Flush Cut Pliers Holder for Honeycomb Storage Wall

simple insert to fit universal flush cut pliers for filament cutting etc. use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4 perimeters…

Pobrania
4803
Polubienia
841
Ocena
4,87