Assassins Creed III Conner.
Assassins Creed III Conner.
- Pobrania
- 2289
- Polubienia
- 482
- Ocena
- 4,5
821 modeli
Assassins Creed III Conner.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Magnet based on the C-17 Globemaster III. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this. I used PETG-CF as the main material and used PLA for…
Contents Scrubber Main model providing the primary shape for the scrubber cover Vent Modifier model to be used to remove top/bottom perimeters allowing for ventilation Male Cap Main model providing the primary shape for the covers to go…
Panzer III ausf L code 235 of the 2nd SS Panzer Division Das Reich In March of 1942, a study was conducted to assess whether the turret of the PzKpfw IV could be fitted onto the superstructure of the Pz Kpfw III. After analysis, it was…
Human talus with fracure, Classifiacation Hawkins III. The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope), which can be applied for focus automation.
Droid Tie Fighter : Star Wars : Episode III
A modern style catchall bowl. Enjoy!
Remix of the amazing Maus easy print model by WindhamGraves on Thingiverse. I realigned the barrel with the turret and separated it for more reliable and cleaner printing upright without supports. Also cleaned up some geometry. The…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
The C-17 Globemaster III is a large military transport aircraft that has been in service around the world for the last 30 years. Created as a paid commission for ChmNrd , the same legend who commissioned the C-130 Hercules Kit ! EDIT:…
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…
My version of the statue of Red XIII from the FINAL FANTASY VII Remake. It is divided into 29 parts for easier printing and preservation of all details. I hope you will like it Print instructions I tried to turn each part straight for…
This is a model of Final Fantasy 7 Red XIII in simple polygon form. If you downloaded the other Cloud Strife Model, I mentioned I had to scale it to 15% when printing. For this model I ended up fixing his tail and hair because they were…
As a huge Iron Man fan, I felt the original model had a great foundation but deserved more attention to detail to truly stand out on a display shelf. I spent hours refining the geometry and adding features that were either too subtle or…
Hi Todd, this was all I could do. Not sure how easy it will be to fit over your head due to the size of the neck ring. I've removed it from the second model incase that helps but it may need modifying further. I have an idea which i'll…
Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…
Save those finger tips! can be used on any ruger mk magazine as well as browning buck mark magazines and probably more!
I could not find a profile for IIIDMAX filament so I created my own. I tuned it with Orca Slicer calibration tools. Temperature, flow rate, pressure advance and max volumetric speed was calibrated. I hope this helps someone. I welcome any…
A Little holder/protector for your BaMaKey TP-iii - from BaMaTech. Pretty self explanatory. The main holder slides nicely into the outer sleeve - like a matchbox etc. There is a recess and a tab to keep it clicked shut - works well. There…
Solaris Urbino IV 10 UPDATE aug'20 | 3D Warehouse (sketchup.com) - odsud staženo
You can easily scale the print file, but make sure that the height (Z) remains at 3mm. Print mirrored to give the model a better surface = face down for PEI boards ;).
Printed from PETG or ABS 2mm walls, infil 40% Printed with supports
End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.12 Infill: 20%…
-Two colors -organic support -0.15 layer height
The Helmet was Modified from a free cosplay file on the whitearmor.net forums All Credit goes to Skylu3D and DeltaReynold for the phase 3 helmet model. A phase 3 Commander back pack is avaible for purchase on Skylu's CGtrader. Feel free…
This decorative model at scale 1:32 is the famous Swiss Railways Crocodile locomotive born in 1919 for pulling freight trains through the Gotthard mountain. This CE 6/8 iii is the third serie built in 1925-1926 and numbered 14301-14318.…
After I got my printer, the first thing I printed was Jacky Wan's lightsaber based off of Obi-Wan's saber from episode IV. Afterwards I wanted to print everyone's lightsaber hilt, but the selection was lacking, so about a year ago I…
The Lancaster has its origins in the twin-engine Avro Manchester which had been developed during the late 1930s in response to the Air Ministry Specification P.13/36 for a medium bomber for "world-wide use" which could carry a torpedo…
The cap for the lumbar support adjustment lever of a Renault Megane Mk3. it is is designed to only fit in the correct position.
This is a 1/20th scale StuG III. I was not trying to create a historically correct model, just a model that would be reasonably fun to put together, look decent, and not send you to the hardware store for more pieces to complete.…
Have a rounded box for your stuff - now the box itself says what's inside. Use OpenSCAD to adapt the text and sizes as needed. You can print the box without supports: This version III now allows to enter the angle at which the box sweeps…
The Puzzle Box III NIce easy Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how! I have seen people puzzle on this for an hour+ - but if you know how, you can intantly open the box -…
One of the most common places to mount speakers in the Baddeley R2D2 is behind the center vents. In the MKIII design, there are mounting holes available that will fit a small, 3" speaker and allow it to be mounted flush to the center vent…
While the filament form GST3D is super cheap and works pretty well I had a lot of trouble together with the Bambu Lab AMS. I have the Hydra Mod, But I assume the same problems are true for the vanilla version. There is a ring adapter, but…
Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…
Albatros D.III biplane fighter aircraft from World War I. Designed in Blender for use as a miniature for the BlueMax boardgame Printed on Anycubic Photon S. Licensed under CC-BY-SA-NC-ND. Print Settings Printer Brand: Anycubic Printer:…
Dacia Sandero III center console organizer printed from PLA, PETG, ABS, but better is from TPU95A.
Tool lift and actuate mechanisms. I include left and right handed version of the mechanism. It is designed for a Mark III Mr Baddeley printed frame. I now have a mod for the COM8 frame as well. However, if someone can test, I am am…
-Two colors -organic support -0.15 layer height
Print at 0.20 No supports needed. BOM: Mounting screw I used.…
The Blob Crowd Plant family just got a little bigger, again. This additional model it based on my original design. I did some painting tests with this one and figured I might just as well upload it here. This smaller one can be placed…
HINT: I should be rising in the sky…. First ever model, it's a little bit scuffed to print but I managed to get it out okay. Very small, but I think it's cuter that way. His teeth are tiny, and I probably should have made them bigger but…
Read the Instructions file for more infos.
Cobra MKIII model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
this is a detailed model of Mitsubishi Evo VIII
StuG III Assault Gun Model Scale: 1:72 The StuG III (Sturmgeschütz III) was the most-produced German armored fighting vehicle of World War II. Originally designed as an infantry support assault gun, it later proved highly effective as a…
Originally Built by FrostyBird @ Thingiverse https://www.thingiverse.com/thing:5879291 Repaired in Microsoft 3D Builder Scaled to Standard Starship Model Scale 1:2500, 1:1400, 1:1000 and 1:350 According to production designer Dave Blass,…
Německý jednomístný stíhací letoun z období první světové války.
Very simple 2x4 gridfinity bin to store a Sony A7 III body for quick and easy retrieval from storage. Bin also includes a nice box on the bottom of the camera to allow you to leave a Tripod mount attached. Prints quite nicely in PLA, I…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Designed to stop filament skipping off the side of full reels or getting tangled on poorly wound spools Can be fixed by cable ties, screws, or glue. Print instructions Files for PLA and PETG included
Here it is, the 3D printed Nintendo Switch Docking Case MKIII. In this update I cut the base into separate pieces so the whole case can be printed on smaller format printers. All parts are printable on Prusa i3 and ender3 sized printers.…
Since my cap for my windshield washing system was distorted and didn't fit anymore, I designed this model. It should suit all Clio III models, but I'm not sure. I'm driving a Clio 3 GT, 2009, sold on the german market. Material:…
Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…
Regardless of what material you use to print your R2D2, the axle that runs through the drive wheel on the MKIII drives should be replaced with a steel rod for maximum strength and durability. Although threaded rods could be used in this…
This is Hrein's model for TI4 and the Prophecy of Kings expansion with some modification by me. The description is copied directly from Thingiverse with my changed in bold. The excess space left in the models by Hrein allowed me to modify…
Simple phoneholder for our Renault Megane III 2013. It hooks safely into the vents and the hazard switch and unlock button are accessible. The holder gives a tight grip on the phone with the original silicone cover (that comes with the…
guitar pick copy Jazz III (Jazz 3) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 100% Filament: НИТ PET-G Black Notes: Speed 50mm/s Category: Music
Arctic Liquid Freezer III AIO Radiator Tubes Comb 13mm spacing
TLDR; Fixes your handbrake button on Skoda Octavia (and maybe other VAG cars) if it popped off, and won't stay back on. (Updated 2024-07-04. User gon on the below forum informed me that the tip was 1.5mm too long. I've removed 1.2mm, and…
spinning maxwell cat requirements: a single 6803 bearing(better to be 2rs) housings are as tight as possible,so it may need a bit of pressure i'll be thankful if you share your print pictures and advices to improve : )
On my Volvo V70 III (Diesel) from 2009 the retention plastic cable of the fuel tank cap broke. While searching for a replacement I stumbled across the model from Adam2k . I went straigth ahead and printed it … sadly the V70 has a…
A knife in the shape of a shark. You can use it for unboxing or like a decoration. Here is the whole Sharkie family. :-) Enjoy and happy printing!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Modeled this up for fun. takes a few pieces of 1/2 in and 1/4 in dowel. will probably need gluing and sanding. Measures a total of 24inches long and is split up, also has a removable mag and ammo. Category: Props
This is my Colt 1903 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
The Shredder action figure with articulated hip/shoulder/neck/elbow/knee joints (Uploading a few of my designs from between 2020 and 2023). More information and assembly instructions on my website:…
Prints without any support material. I supplied the STEP file for the case for very easy modification in any CAD software. It fits very well on the phone, even better than “real” phone cases that I've tried. If you need any modification,…
For my third batch of spiral vase Christmas ornaments, I thought I'd change things up a bit with some icicle baubles. Although these have a different formfactor, they're just as quick and easy to print as my bauble designs from years…
It all started with the idea to push the limits of the 3D printing to create a precision tool that I could have made out of metal instead. The first version was without real bearings so after a while the main bearing started to get…
Kratos statue with separated printable parts, because the original link doesn't have them. This is NOT my model. I just made it into two separate pieces.
Panzer III Tank Model Scale: 1:72 The Panzer III was one of Germany's primary medium tanks during the early years of World War II. Designed to engage enemy armored vehicles, it served on multiple fronts and formed the backbone of German…
The retaining pins expect a spring with a (roughly) 8mm inside diameter. I used a 27/32" X 3/8" 0.32 compression spring, and cut it maybe 5/8" shorter. You don't want a ton of pressure, especially when full. Comfortably fits about five…
I needed simple and lightweight diffuser for macro photography. I was unable to find suitable diffuser for my Godox v860III flash so i created my own. I have 2 macro lenses: Laowa 100mm and Canon 100mm and this diffuser works well with…
My 4iiii Precision Powermeter battery cover cracked, so I designed and printed my own. I used a layer height of 0.08mm for the cover and the O-ring. I printed the cover in PETG and the O-ring in TPU.
The Baddeley MKIII CentreVentPanel is intended to be held in place via a small round “plug” (VentFrameLowerHold.stl) that drops down through a hole in the bottom of the frame into a divot in the body, and a thin, horizontal piece across…
I already had extended mag base plates for my Ruger 22/45 MKII and MKIII, but since I duplicated the mag base plates for the 22/45 MKIV , I figured I might as well do it for the MKII and MKIII as well. I highly recommend you print them in…
Eebel's hinged electronics board is awesome, but I wanted to mount more common electronics than what he used in the current version. The board holds the following components - Microsoft Xbox Receiver, Sabertooth 2x32 Motor Driver, SyRen…
The Vince Lombardi Trophy with (non-official sized) NFL-logo and Kansas City Chiefs logo with Superbowl LVIII 2024 watermark. Ball printed seperately and then glued together. Print the stand with support for the logos. Remix of various…
This is a battery holder that can be added to a Baddeley MKIII Astromech droid. It mounts via a modified AnkleSupportBar2 which is the longer support piece for the large AnkleSupport that sits at the bottom of the body. This holder is…
He diseñado este rascador de hielos para mi Skoda Octavia III con el logotipo incluido,que se guarda facilmente en la tapa del deposito de combustible Supongo que puede servir para todos los modelos del grupo VAG Aunque lo he realizado en…
Ruger Mark 22/45 MK III, IV 22lr Bull Barrel, picatinny adapter, for Mantis X or Tactical light. TRL-1, TRL-7,… Designed to fit the Ruger Target pistol with the 22mm diameter bull barrel. Rounded front, to make sliding on of Mantis X…
A simple lens cap for the Ricoh GR III / IIIx. I mainly created it to help keep any dust and debris away from the lens when I toss it in my pocket or bag. I printed it in Hatchbox TPU at 15% infill and it fits great.
The “lever” that moves the horizontal part of the vent on a Renault Megane Mk 3. I didn't add the shelf that holds the little metal tensioner part since I lost mine and the feature looked too small to print, anyway it works just not as…
High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…
EDIT 12/12/23: I added a 36mm version with other writing on the front. EDIT: I added a 37mm version for Spektrum 2 in 1. I made this model to hide the motor of your BoomRacing BRX02 Series III that is visible thru the grille. This…
A major trial of strength, or a source of neat ancient weapons. Either way, these mini guardians are nothing to joke about.
Panzer III with side skirts, 1/100 scale. Use v2 (has better reinforced side skirts)
Please don't forget to give like to this model if you truly like it, thanks! Hello fellow guitar players! Like many guitarists, I love playing with a Jazz III pick — but I got tired of constantly buying new ones. So I decided to design my…
Hi! We glad to introduce 3d model - STL files - to print your own Communicator from Star Trek III. Model include: - 16 stl files to 3d printing (biggest part demensions: 98*60*16mm). - 1 stl files - stand for Star Trek III Communicator. -…
Based on design for other anker USB hub. I attach this using command strips but added a version with holes for M3 countersunk screws as well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20…
This is a 3D printable model of Connor Kenway, the main character from Assassin's Creed 3. The model is designed as a f
Hewo, I want to share my idea to organize items from the Heroes of Might and Magic III Board Game. There is no place for storing things from all DLC's in one place, so I made one myself. I made boxes for cards, tokens and cubes. Box for…
I loved the twist on design of Bluewar's handle, but I didn't like how it came out on the underside because of the needed supports. While remixing that to become support free, I also did a short and long ring version.
This is a lens ring for Ricoh GR III with 3 mounting positions around the lens.