285 modeli
This is a quick and easy printable clip designed to hold the bowden tube of your Ultimaker in place. After inserting the tube into the fitting, pull it up and put the printed clip underneath the collet to secure the tube in place.
After you have generated the g-code, delete the entire header block. Otherwise, the g-code won't work! The Ultimaker S-line firmware will check the firmware version and say that G-code file cannot be printed because it contains an…
Yet another belt tensioner for Ultimaker 2 Category: 3D Printer Accessories
This holder is for the cores of the Ultimaker 3D printer. I have created in different designs designed to fit 2 to 10 print cores. Since I will fix it with double-sided adhesive tape, I have not made any holes for screws. If somebody…
Just run it in cura and open it as a project :D
update 14/05/2025: As some people had issues with the previous file, I did some tests again and made new preset files. update 30/01/2025: As per a request I got, I added a print profile for an UltiMaker 2+ with a 0.6mm nozzle installed
Love your Ultimaker 3 but hate the poorly designed spool holder it came with? Then give this re-engineered spool holder a try! Link to the source files can be found under the "Design Files" heading. WARNINGS: 1) Be sure to read "Print…
The reason why I did this is because normally if you add the Ultimaker 2 Extended + to Ultimaker Cura, it won't let you adjust the settings for retraction that are most important (retraction speed and retraction distance). Normally when…
I needed a spool holder for the Rigid Ink 1kg spools as they have a larger hole (54mm) and wider body (74mm). This spool holder will hold a spool with a body up to 76mm. The Innofil/Ultimaker spools do not fit this holder, but it is as…
“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…
The Lubi Boy is helping to do the maintenance on the rods of 3D printers (e.g. Ultimaker (S5, S3, 2+), Prusa (MK2, MK3, Mini, Mini+). It is possible to use it to apply lubrication to the rods easily and remove dust or dirt from them.…
Storage rack for six Print Cores that can be mounted with the original screws on the Ultimaker 3. Print laying down on its back. Originally published on YouMagine back in 2020
Mount an E3D V6 hotend onto your Ultimaker 2 or 2+. Attaches with cable ties (zip ties) and a single screw. Simple. Mounting points for all three fans: 2x original part fans and the E3D heatsink fan. Use the screws you're using now (The…
[I've removed the models for the first version as they cooled the nozzle more than the part! ] These ducts position the air flow around part under the nozzle better. Because the cooling is more effective you may need need to reduce max…
Preview: https://a360.co/3r8g7y6
Customized version of https://www.thingiverse.com/thing:1381839 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1381839 Instructions Using the following options: machine = Ultimaker 2+ PETG temperature =…
I designed this toolhead for the Ultimaker 2+ and similar 3D printers. Its designed for the Orbiter extruder and a Revo Voron edition hotend using 1.75mm filament. It uses the original fans for the complete toolhead, so besides the…
I don't always necessarily use the Ultimaker brand filament with the S5. I designed this model because bigger 1kg spools from other brands don't always fit on the provided spool holder (especially when doing dual extrusion prints). It…
This filament guide screws to your printer as a replacement for the cable cover, and you will never lose or forget it again! It will ONLY fit the regular Ultimaker 3, not the extended version, because of the different placements of the…
This is quite large compared with the original benchmark robot. It is scaled and then stretched front to back so that it can sit on a Lego compatible base (3X3 Lego studs). This prints fairly quickly and is a good size to fit in a child's…
You'll want to print this in ABS or PETG or some other high-temp material. It's also a good idea to cover the inside of the shroud with aluminium tape or foil to help reflect some of the heat. I used M2 screws to attach the radial fans,…
This model replaces the bottom plastic section of an Ultimaker 2/2+ Printhead. It also features routing holes on the sides for easy side fan wire routing and a channel behind the BLTouch mounting point to safely route the BLTouch cables.…
Parts required 1x LGX lite 1x Phateus Dragon SF/HF Hotend 1x Heater cartridge 24V ≥30W to suit Dragon 1x 40mm x 4mm OD PTFE tube for between extruder and hotend 4x M2.5x6 CSK screws for Dragon 4x M3x8 CSK screws for LGX 5x M3x35 Cap…
Customized version of https://www.thingiverse.com/thing:1381839 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1381839 Instructions Using the following options: machine = Ultimaker 2+ PLA temperature =…
Print on it's back. Simply remove one of the top screws on either side panel to mount. I derived this from Erik's wonderful design, but I only have three print cores total so six slots was more than I needed. I simply edited the STL by…
Spool holder for UliMaker 3, S5 and S7. Supports one 750g spool plus one 2.2Kg Spool. Fits perfectly on the printer with the original NFC sensor and bottom part. Prints in two parts, with 4 alignment pins.
gyro air ultimaker speciale Category: Art
Ultimaker 2/2+ FAN Upgrade.
This is a print head for the Ultimaker 2. I created it after my second original print head got cracks. It is a drop in replacement, you can use stock bearings. The cables are fixed on the outside and the outer part is desinged to be…
This is a model of the Ultimaker S5 3D printer Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Doesn't Matter Notes: rotate model 90 degrees on the X axis to minimize supports Category: 3D Printers
Parts needed: One - Screw M3x10 : to fasten cable clip to mount One - Screw M3x35 : To fasten hotend to mount One - Threaded insert M3x4 : For M3x35 screw can have better grip Four - Grub screw M3x4 : To tighten bearings to mount Four -…
Description This is my first ever design for 3D printing, I don't have the time to learn CAD in full yet so, used Tinkercad online, which is extremely intuitive and easy to use. I searched for ages trying to find a tool/nozzle holder for…
Have a Ultimaker and want to make it ridiculous? Well here you go, this is what i did to my ultimaker 2+ to make it ready for Klipper. Is this necessary? Is it kinda ridiculous? Absolutely and that is why i love it haha. This is a long…
Ultimaker 2 and 2+ E3d hotend fan upgrade. With two 4040 Creality fans and one 4040 25 Silent fan
This is a simple but pleasant door system for the UM3E printer, where the hinges are installed using existing screw-holes. The hinges are held together using a M3 screw and standard nut, which allows to control how much force needs to be…
A direct drive extruder for the UM2 using a PG35L Nema 17 geared motor. It's light, it's super quiet, and best of all... it prints Ninjaflex! With a 1.75 filament setup, flexible filament would not print on my bowden-based extruders... so…
Simple little fanduct for use with 8mm M3 screws, prints without supports. Also, thanks to Rudolf Huttary for writing this awesome time saving lib sc.scad. Print instructions Category: 3D Printer Parts Summary Simple little fanduct for…
Ultimaker2 comes with a 50mm diameter reel holder. The reels have hubs around 53mm or so that are "Ultimaker Compatible". Don't get me wrong, you can get awesome filament from Ultimaker, and from others like Colorfabb (love this product),…
Converting the Ultimaker2 clone to direct extrusion using a lightweight extruder was a long term project of mine. So here it is: Only 250g total, well ballaced on the drive rods and only a small penalty in usable space. The flange for the…
Ultimaker S3 Spool Holder for generic filament. Design to be printed without support. No tool required. Clips on the Ultimaker s3. Design to be used with extra bowden on the feeding block (step motor block).
Print the pin on the large flat head. Print the guide on the flat side. Neither will need support. Print the spool holder on the side with support “touching buildplate only" and then add custom supports on the areas that still overhang at…
Preview: https://a360.co/3HtEVHr
A new knob for the Ultimaker 2 which provides a better grip. Based on Ultimaker 2 Knob . I redesinged fillets a bit and made it a little smaller in diameter because original design turned out to turn a bit strong, at least in my Ultimaker…
Flat feet to put under Ultimaker 2 to reduce noise. These feet provide a flat surface that is then easier to soften to isolate vibrations. I used some 3M "Multi Purpose Sealing and Insulation Tape" under the feet for soft cushioning. Also…
This model will hold the Nozzles on the side of the printer, out of the way. It does require support.
This was designed to fit on the side of the S5, holding onto the top lip. It does require support for the holders, those are the only part that require support.
Hi, is a simple Tool to Clean and Oil the Rod/Shafts 8 and 10 mm. Addtional Material: Self Adhesive Felt gliders 1,5-2 mm Print Settings: Layer Height - 0.16 Cooling Settings PLA: Cooling Settings PETG:
I thought that the ones I could find were a bit too rough, so I designed a slimmer and nicer version for our 3d printing room at Stockholm Makerspace Originally published on YouMagine back in 2016
Works well with the Polymaker cardboard spool adapter. https://www.printables.com/model/495778-polymaker-cardboard-spool-adapter Print with at least 1.6mm minimum walls and 25% minimum infill. the PIN and GUIDE print without support, The…
A simple spool extender I made for my Ultimaker 2+ Connect that clips on the existing spool holder. I recently bought some cardboard spools that are too large for the spool holder. With this, spools fits ok. Not a perfect solution, but…
Printer brand:Ultimaker Printer:Ultimaker 3 Rafts:No Supports:No Resolution:.2 Infill:50% Notes: Printed in TPU85 (NinjaFlex) in 4h 30m per foot.rnPrinting Temperature: 235rnFlow: 110rnRetraction: OffrnPrint Speed: 30 mm/srnMaximum Fan…
STL Repuesto para fan 5015 Trimaker Modelo : Nebula Plus - Nebula Plus Cloud Datos de Impresión: Material Utilizado: ABS Paredes : 4 NO requiere SOPORTES
This is not The Greatest UM2 Clone, no. This is just a tribute. This project began as a fun way to learn AutoDesk Fusion 360. I started by importing the entire Solidworks CAD file into a new Fusion 360 project, dropped the frame (walls)…
IMPORTANT! YOU NEED 4 STANDARD M3 NUTS AND 4pcs of M3x12 BOLTS IN ORDER TO COMPLETE THE ASSEMBLY! Compatible with Ultimaker 2, Ultimaker 2+ and possibly more. Tensioning Animation Tutorial: PROS AND CONS ORIGINAL DESIGN TENSIONER DESIGN…
Customized version of https://www.thingiverse.com/thing:1381839 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1381839 Instructions Using the following options: machine = Ultimaker 2+ ABS temperature =…
Remixed version of the original spool holder that combines the top and bottom pieces into a single piece for more strength and faster printing. This fits the Ultimaker 2/2+/3 and the combined top and bottom reel piece is good if you don't…
This is a simple spool holder designed to be mounted on the Ultimaker Original and Original + reel holder mounting plate located on the back panel. If your slicer of choice has a bridging detection feature, this model does not require…
A very minimal door inspired by the S-line design. It is made to be non-destructive and uses double adhesive tape on the inside to secure the hinge. This is less ideal than using screws. But I didn't want to cut holes in the Dibond casing…
Ultimaker 2 Geared Feeder Mounting Plate. print it with 100 % infil for the best results
I find the bed leveling screw on the Ultimaker 2 difficult to rotate due to its small size and lack of grip so I made this knob that is thin enough to fit in the gap between the bed and bottom of the printer while being big enough that…
Additional hardware: Two M3x10 : To fasten the mount to the ultimaker Four M2x10 : to fasten the pi to the mount and standoffs Four M2x? : to fasten the BTT board to the standoffs (already included with btt board) Best way I found to use…
Prints fine with a 0.4mm nozzle and 0.25mm layers without support in 4-6 hours. One version is provided with a base. One version is provided without any extras so you can add your own base or mounting holes.
Passend für das Netzteil vom Ultimaker 2+ Category: 3D Printer Accessories
1x Noctua NF-40x40x20 fan 2x radial 40x40x10 fan 1x M12 4 mm LJ12A3-4-Z/bx sensor 1x E3D V6/Revo
Snap on these standoffs (or feet) to your Ultimaker to help keep your work surface and printer safe from scratches. They also provide enough height to mount the power supply to the bottom of the machine, reducing its overall footprint…
This is the Extruder/Feeder from the Ultimaker 2+, which I’ve reinforced and slightly modified. The extruder housing has been upgraded by removing the original arm axle and replacing it with a threaded hole for an M5 countersunk bolt.…
E3D V6 hotend mount for Ultimaker 2+. This was originally made for Ultimaker 2, but I adapted the design for 2+. NOTE This will limit your y-axis range to about 185mm, x-axis mostly unaffected, Z axis needs to be adjusted slightly, but…
A fun trivia is that this most likely is the first model ever published with the Ultimaker print cores or the Ultimaker 3 in mind. I was part of the beta tester group and published these files on YouMagine just minutes after the product…
This is a sliding block for an Ultimaker 2 (and possibly other printer models). It is printed in one piece. The length is no longer than the bearing, and has a 6mm offset. The 6mm offset lets you have a larger print volume when using a…
https://github.com/Ultimaker/Ultimaker3 Not my design, Ultimaker's design from the above link, exported as STL in Fusion 360. No threads on these models, this is mostly for demonstration of the nozzle internals. The threads are M6x0.75 if…
This was a combination of two designs on Thingiverse. This design screws directly into the S-series enclosure and features 6 print core slots with a circular slot locking the print core in place. No supports needed Category: 3D Printer…
A Dual Direct Drive Chimera / Cyclops Extruder, made by me, C_Cheetos. Any feedback is appreciated! This is a relatively easily printable direct drive dual extruder sollution for prusa i3 style 3D printers, using 1.75 mm filament.…
These feet use 50 durometer, 30 and 40mm half-spheres made out of the visco-elastic urethane rubber "Sorbothane" to reduce the amount of conducted vibrations by a lot, without the problems of self-induced oscillation of more springy…
This is a model of the Ultimaker 2 Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Doesn't Matter Notes: Rotate model 90 degrees on the X axis to minimize supports Category: 3D Printers
A fan duct for the Ultimaker 2 by PeltonEngineering! Uses the fans airflow far better then the original one. I tried to optimize the cooling as much as possible. Also you need no screws for it. IMPORTANT: You have to print the Y-Axis…
Hey, I made this box as a storage for our Ultimaker Printcores at my university. I have printed our version with transparent PLA @T:210C B:70C. The lid tolerance is 0.4mm. Happy Printing! Print Settings Printer Brand: Ultimaker Printer:…
A simpel holder to hold the printcore near the printer at all time when not in use. Needs to be screwed togheter with a simpel bolt nut. The holder clamps the core secure like in the extruder itslef, so it will not easily fall out. Also…
Print items from PETG and TPU. Connect the elements with M3 8mm screws.
Simple holder for your extra build plates. Just print a couple of them and plate under the printer side plate, have space for 2 extra plates.
This was a combination of two designs on Thingiverse. This design screws directly into the S-series enclosure and features 6 print core slots with a circular slot locking the print core in place. Holds print cores securely by locking in…
V-Slot z-stage for Ultimaker Original This is a drop-in replacement for the z-stage to accommodate the MK3 Aluminium heated bed. Alternative parts to accommodate my original 3-point levelled heated bed set up (…
Upgrades your old Ultimaker Original to direct drive using an Orbiter extruder. I use the 2.85mm version since I am also using a second printer from Ultimaker and want to use the same filament rolls for both. With this upgrade I can print…
*NOTE: Use V2 parts where available. See update notes below. *DISCLAIMER: I'm not responsible if you ruin anything on your printer, waste your time, or any unforeseen undesirable effects using this mount may have on your printer. If your…
I modelled this using SolidWorks for the printers at my work
Materials and methods Print settings: layer height 0.1 80% infill speed print 40mm/s speed infill 80mm/s no support Print list: 1x um2-bltouch-bracket 1x um2-bltouch-cover Part list: 1x BLTouch sensor 2x DIN912 M1.6x4mm Part links:…
A print head top piece that fits standard collets 4mm bowden tubing.
Update: now tested, worked great as it was! Still untested design for mounting 1/8" pneumatic push fit connectors. The design is based on hugokernel's http://www.thingiverse.com/thing:177209 but was heavily modified (stripped down, some…
This is a drop in adapter to allow using the stock Ultimaker bowden tube diameter with most dual gear extruder models. The dual gear extruder is an upgrade to the single gear extruder that comes with the Ultimaker and can help with…
Pin Challenge on the Ultimaker 2+ with DXUv2 printhead. I needed to enable the Conical Start and halve the Sphere Speed Max to 250mm/min due to the Ultimaker 2 DXUv2 printhead with two hot nozzles and Labern fan shroud (axial fans) not…
Upgraded parts for jasonatepaint 's Ultimaker 2 Aluminum Extrusion 3D printer . New parts include: More bulky gantry spacers with larger through holes (less susceptible to warping and shrinkage due to thicker walls and no post processing…
Display for my Ultimaker 2 mounted without drilling holes for screws. Display case for an Raspberry Pi 3 model B (fit also for Pi2 Model B) 800x480 5" TFT display with XPT2046 touch screen. Items used: Raspberry Pi Model 3 B 5" LCD HDMI…
These blocks can be replaced without having to dismantle the rods and pulleys, after of course removing the original blocks. The belt tension is adjustable through a banana cam. The gantry can be easily removed without undoing the blocks.…
I made this adapter so I could put filament from another manufacturer on the printer. The design is for a filament with an internal drum diameter of 57mm but it is optimized for smaller ones. The width is slightly larger than standard for…
Here is a quick design I made for my Ultimaker Original+ with dual extruder to silence the printer a littel bit. You need to print four of each piece to support the printer frame. Print instructions Category: 3D Printer Parts
Two parts case for adding a Raspicam (for Octoprint or Klipper, or anything else...) to an Ultimaker 2/2+/extended. (Should be compatible with other Ultimaker printers, except if there is already a cam at the same place ;-) ). BOM : 1x…
A small sound damping foot for the Ultimaker Original and Original+. Probably fits UM2 too. Prints fast, uses little material. Instructions Designed in FreeCAD. Cleaned up in Meshmixer. Printed on an UMO+ in PLA with 0.25mm layers. Put it…
A mount for Logitech C270 webcam with its stand taken off. Very likely to work with other similar Logitech cameras with same stand design. Hangs in front of Ultimaker and angle of the camera can be adjusted. I attached the camera to the…
Printer brand:Ultimaker Printer:Ultimaker 3 Rafts:No Supports:Yes Resolution:0.1 Infill:20
Voron ClockWork2 Extruder for Ultimaker2 with Volcano Hotend and 4010Fan Note. You can get STLs for small parts of cw2 on voron official website I mod mine from orignal UM2 hotend but I've already done many mods before. So I cannot…
This is a spool holder base for the Ultimaker 2 and similar printers that can be used to mount the Creality Digital Spool holder.
![[WIP] Ultimaker 2 (UM2) part fan shroud - no supports needed](https://media.printables.com/media/prints/478418/images/3924939_07774213-b9d0-4cce-985b-8d7c6a9de842/img_20230512_174831509.jpg)
![[v2] Ultimaker 2/2+ Sliding Block with Belt Tensioning Mechanism](https://media.printables.com/media/prints/1211117/images/9091686_71d278c2-a44d-47b7-b96a-af3d0ae07ffd_c4078ca3-a5b8-4c4b-8948-2a52f73f01fa/sliding_block_6mm_offset_v8_2025-feb-28_05-27-16pm-000_customizedview38322024348_png.png)
