P
PrintablesGeorge75
Funnel with insertion filter
Funnel for pouring liquids, including an insertion filter to trap dirt. Easy to print
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 39
- Polubienia
- 6
- Ocena
- 0
Wyniki wyszukiwania: inserti
136 modeli
P
Printableshpst
Top Plug Center - modified with filament insertion
This model of Prusa Enclosure top plug center r1 is modified with a filament passage and a suitable connection for a PTF
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAnheledir
Gridfinity-Bin (5x3) for two Magnet Insertion Tools
I really like Phil Caruso's Magnet Insertion Tool, and I just started organizing my 3D printing tool area with Gridfinity. So obviously I needed a bin for my two copies of the tool, too, but couldn't find one just yet. It's my first…
Wydruk około 6,95 €–8,49 € nettoWstępna wycena jednego wariantu
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDockGuy
Temperature Tower auto g-code insertion to set temps automatically - Tune PETG for no stringing
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
- Pobrania
- 5083
- Polubienia
- 194
- Ocena
- 5
P
PrintablesEmGi
Magnet Insertion Tool v2
UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…
- Pobrania
- 4357
- Polubienia
- 2226
- Ocena
- 4,87
P
PrintablesRaschmaschine
Drop-in T-Nut 2020 / 2040 extrusion | M3 nut insertion | Ender 3
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
- Pobrania
- 2896
- Polubienia
- 409
- Ocena
- 4,73
P
Printables3Dprintedgr
Pursa Mini/Prusa Mini+ T-nut for extrusions (M3 nut insertion)
I made this remix of the design made by HD_Creator ( https://www.prusaprinters.org/prints/42971-t-nut-for-pursa-mini-extrusions-groove-8-type-b-m4/comments ) because it feels safer to screw against a metal nut instead of the plastic. Also…
- Pobrania
- 2694
- Polubienia
- 357
- Ocena
- 4,96
P
PrintablesEmGi
Magnet Insertion Tool v1
UPDATELOG: 02.09.2024: 6x3mm Magnets are now supported. 6x2 Picker 24.08.2024: 8x2mm Magnets are now supported. Tip got simplified to a blank bottom surface so it can be used for all magnet sizes 8x2 Picker 20.08.2024: 6x2mm Magnets are…
- Pobrania
- 2400
- Polubienia
- 1412
- Ocena
- 4,91
P
PrintablesExtrutim
Cable Insertion Tool | Split Wire Loom Tubing
A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…
- Pobrania
- 2390
- Polubienia
- 436
- Ocena
- 4,85
P
PrintablesChris Hill
Cable insertion tool for split convoluted tube
*** Update 22/12/2023 *** Added a version with webs between the legs and the angled tube, to make it easier to insert the tool into the tube, and to add strength to the legs. Inserting cables into long lengths of split convoluted tube can…
- Pobrania
- 944
- Polubienia
- 439
- Ocena
- 5
P
Printablesunlimitedbacon
Split Wire Loom Insertion Tool
This is a tool for quickly inserting wire bundles in to split looms, sheaths, or wraps. This video shows how the tool is used. There are versions for ½" and ¾" wraps. CAD on Onshape
- Pobrania
- 861
- Polubienia
- 89
- Ocena
- 4,75
P
PrintablesJorge
Magnet insertion Fast-Tool
Introduction This tool is available for diameters of 6 and 8 (added 5 and 10 too), which are the most common diameters for UMSS . Please note that it is necessary to check the desired orientation for the magnet before placing the magnet,…
- Pobrania
- 783
- Polubienia
- 149
- Ocena
- 4,91
P
PrintablesRork
Improved Magnetic DeWalt bit holder - 6x3mm magnets, easy insertion and removal
This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…
- Pobrania
- 722
- Polubienia
- 137
- Ocena
- 4,88
P
PrintablesSebazzz
Bambu Lab X1(C) SD card extraction/insertion tool
Description The microSD card of the Bambu Lab X1 is a bit too deep inside the touchscreen; this tool eases extraction and insertion of the microSD card. I don't want to risk damaging the device by messing around with a sharp object or a…
- Pobrania
- 688
- Polubienia
- 100
- Ocena
- 4,91
P
PrintablesSurfalex2000
Prusa XL series: Filament insertion guide
After seeing the Funnel from Marobi1958 i thought that it is actually a good idea for inserting Filament easier. I just had improvement ideas. The opening is more agressiv, which should allow easier insertion. The PTFE side is…
- Pobrania
- 613
- Polubienia
- 126
- Ocena
- 4,86
P
PrintablesShortcircuit
Arrow nock insertion and rotation tool
A simple tool to align and insert the nock in the arrow shaft. So far the tool was only tested with Easton nocks but should work for most. I recommend printing it with 100% infill
- Pobrania
- 547
- Polubienia
- 37
- Ocena
- 0
P
Printablesgeektoybox
Split Loom Wire Insertion Tool
Found this design on the other site (thing:589565 by ksanalytical) but I had a hard time running it through the mesh loom I have (similar to what's on Prusa machines) so I recreated it and added a way to pull it and to add a zip tie or…
- Pobrania
- 444
- Polubienia
- 60
- Ocena
- 5
P
PrintablesBasementLAB
Stubby Handle for Hex 1/4 Bit Driver Screwdriver - Mini manico porta inserti esagonali
Stubby Handle for Hex 1/4 Bit Driver Screwdriver - Mini manico porta inserti esagonali Available for: 10 - 25mm bit 15/10/2025 Update. Added REV1 versions Bottom Chamfer: Added to enhance print bed surface quality. Bit Socket Tolerance:…
- Pobrania
- 375
- Polubienia
- 66
- Ocena
- 5
P
Printablesyawkat
Magnet insertion jig for 'gridfinity rebuilt'
Gridfinity rebuilt bins can hold magnets with friction-fit only, without glue. Inserting the magnets can be a bit finicky though, especially if the model is configured to hold them snug. This jig makes inserting magnets easy. Each magnet…
- Pobrania
- 312
- Polubienia
- 42
- Ocena
- 5
P
Printablesdancan13f
Cable Insertion Tool for split wire conduit
Inspired by the Extrutim model: https://www.printables.com/model/473485-cable-insertion-tool-split-wire-loom-tubing I designed it for mounting the Prusa Core One kit. This one is slit on the side to easily insert the electrical wires. On…
- Pobrania
- 255
- Polubienia
- 14
- Ocena
- 5
P
Printablescjnaz
Magnet insertion tool for 3mm, 4mm, 5mm, 6mm diameter magnets
Designed for inserting 3mm, 4mm, 5mm, and 5mm diameter magnets into printed projects. Load a few magnets into the 10mm slot in the post in the desired orientation/polarity. These magnets hold the magnet on the tip in the desired polarity.…
- Pobrania
- 243
- Polubienia
- 38
- Ocena
- 5
P
PrintablesGrumpyTanker
Magnet Insertion Jig for Pred's Parametric Gridfinity Boxes
A little jig to help with lining up and inserting magnets into the pockets at the bottom of the bins. There is a press fit magnet spot on the top (or bottom depending on your perspective) to hold a magnet so that you can keep your magnet…
- Pobrania
- 233
- Polubienia
- 32
- Ocena
- 3
P
PrintablesLachsmalstift
(Better) Ender 3 V2 Filament guide with easy filament insertion
I have customized the filament guide for the Ender 3 V2 (Neo). Additionally, I have added the feature that makes it easy to insert and remove the filament!
- Pobrania
- 210
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLosspost
Gridfinity Magnet Insertion Helper
I began my journey with Gridfinity, exploring various configurations through 3D printing. Recently, I faced a challenge while incorporating magnets into my designs. To address this, I've designed a specialized 'Magnet Insertion…
- Pobrania
- 202
- Polubienia
- 36
- Ocena
- 5
P
Printablestomas
Crocodile - inserting puzzle for kids
The crocodile insert puzzle is for improving children's motor skills. The parts are inserted into the insertion pad in order from number one to number 10. The edges of the individual parts are beveled, the insert pad has rounded edges.
- Pobrania
- 201
- Polubienia
- 68
- Ocena
- 5
P
PrintablesBasementLAB
Compact portable bit holder - Porta inserti compatto
Compact portable Bit Holder - Mini Porta inserti esagonali compatto Easy to print, optimized filament usage. For Hex ¼ bit driver Resize/Scale to adjust dimension If you download/enjoyed this file, I always appreciate a like - Thx
- Pobrania
- 185
- Polubienia
- 45
- Ocena
- 5
P
PrintablesRaschmaschine
M4 Wing nut / Butterfly nut | M4 nut insertion
This guy lets a regular M4 nut become a wing nut / butterfly nut for various applications. Simply push the metal M4 nut into the side slot. Should fit tightly. Prints with no supports. The output shown in the featured image is at 0.10 mm…
- Pobrania
- 171
- Polubienia
- 11
- Ocena
- 5
P
Printablesforsaken_candy
SV06 Filament Guide (better insertion slot)
Remixed to move the insertion slot to the front to prevent filament popping out during prints. UPDATES 14 Mar 2023: Made the slot v-shaped and also diagonal to make it harder for the filament to pop out
- Pobrania
- 169
- Polubienia
- 23
- Ocena
- 5
P
PrintablesHackcasual
Glass front gridfinity bins with pause mid print insertion
Solid window divider bin, designed to be paused for glass slide insertion. For Prusa Slicer, use the layer slider to find the first layer you see the bridge go over the glass slide, and add a pause there. I've tested this on 4 bins at a…
- Pobrania
- 165
- Polubienia
- 28
- Ocena
- 4
P
PrintablesGeoStork
Pen Tube Insertion Tool
Pen tube insertion tool. Keeps fingers out of the glue. Perhaps a little longer than I needed (didn't have a dimensioned prototype to copy). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 200…
- Pobrania
- 149
- Polubienia
- 13
- Ocena
- 5
P
Printablestomas
Snake - inserting puzzle for kids
The snake inserting puzzle is for improving children's motor skills. The parts are inserted into the insertion pad in order from number 1 to number 10. The edges of the individual parts are beveled, the insert pad has rounded edges.
- Pobrania
- 111
- Polubienia
- 34
- Ocena
- 0
P
PrintablesSonnenschauer
HEBDI cable Insertion Aid
HEBDI is an insertion aid for the filigree charging cable of the iPhone or iPad, Samsung S7 and S8. Once mounted firmly to the cable, it simplifies insertion and removal of the charging cable. For whom? HEBDI is primarily intended for…
- Pobrania
- 107
- Polubienia
- 25
- Ocena
- 3
P
PrintablesChance
Talon mag adapter body - with over-insertion protection
Uses the lever and insert from the remixed file. This remix adds a lip around the top-rear side of the hole, preventing over-insertion of the talon mag in the adapter. Tested with a Stryfe, may work on others too. Also uses M3 socket-head…
- Pobrania
- 105
- Polubienia
- 10
- Ocena
- 0
P
PrintablesA3D Printing Farm
PEX Connector Insertion Gauge
These gauges allow you to quickly slide them over a specific size of PEX, CPVC or Copper tubing to check the insertion depth and mark it. This way you can cut tubing to the perfect length prior to inserting a PEX fitting.
- Pobrania
- 100
- Polubienia
- 14
- Ocena
- 0
P
Printablesjurassic73
Flared PTFE Insertion Guide Helper
This is a flared PTFE guide that goes on the end of a PTFE tube to help with insertion of filament into said tube. If I don't have my reading glasses on, this is a nice helper. If you want to do two color pieces, add a filament change in…
- Pobrania
- 84
- Polubienia
- 16
- Ocena
- 5
P
PrintablesPower
insertion-guide for filament sensor FLSUN V400
After I installed the SUNLU dryer on the top FLSUN V400, I was faced with the problem that the filament does not always pass well through the sensor, it sometimes jumps to the side and does not want to pass through the sensor. With the…
- Pobrania
- 84
- Polubienia
- 5
- Ocena
- 0
P
Printableswuschel
Hearing Aid Insertion Tool
Hearing Aid Insertion Tool (4x4mm)
- Pobrania
- 80
- Polubienia
- 4
- Ocena
- 0
P
Printableswiste95
Magnet Applicator – Easy Insertion Tool
Inserting small magnets into 3D prints can be frustrating – especially without proper tools. This compact Magnet Applicator is designed to make the process fast, safe, and aligned. Simply place a 6x2mm round magnet into the cup, insert…
- Pobrania
- 80
- Polubienia
- 11
- Ocena
- 5
P
PrintablesJulius
Drop-in stretched T-nut 2020 - M3 nut insertion
Pushed around quite some vertices in Blender to make it like this. The nut can now just be placed, not a 'tight fit', but the profile will keep it in place fine.
- Pobrania
- 79
- Polubienia
- 13
- Ocena
- 5
P
PrintablesSixpack99
Magnet Insertion Tools 6mm 8mm 10mm
I needed a way to easily press multiple magnets into my 3d printed parts, and it was a pain trying to keep the polarity the same with each magnet and not drop any. Not to mention it is a little hard on the thumb to press them in…
- Pobrania
- 77
- Polubienia
- 16
- Ocena
- 0
P
Printablesrevbem
6x3lever plus for Magnet Insertion Tool v2 from EmGI
This is a remix for the lever part from EmGi's excellent Magnet Insertion Tool. https://www.printables.com/model/1008467-magnet-insertion-tool-v2 The Magnet Insertion Tool is an awesome design. However I had troubles with the rubber. No…
- Pobrania
- 76
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBiggslo99
Hearing Aid Insertion Tool with double slit (4x4mm)
This is the same as this- https://www.printables.com/model/1007864-hearing-aid-insertion-tool except except with 2 slits
- Pobrania
- 75
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJannisJFry
BNC inserting/removal tool
I screw a lot of BNC connectors at work. Usually I screwed them in with pliers, but that sometimes scratched the BNC. So I made this.
- Pobrania
- 72
- Polubienia
- 9
- Ocena
- 5
P
PrintablesRemy
PEX Insertion Depth Tool
A pipe depth setting tool designed for use with Copper, PEX or CPVC Pipe. Insert pipe into the appropriate size (1/2" or 3/4") and mark a ring around the pipe to indicate proper depth for the SharkBite Push-To-Connect fittings to ensure a…
- Pobrania
- 63
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJoker
PC4-01 Inner plug for inserting filament
PC4-01 Inner plug, for no problematic inserting filament Buy me a coffee: https://ko-fi.com/jokereuc
- Pobrania
- 60
- Polubienia
- 9
- Ocena
- 0
P
PrintablesSissyspaceship
Scleral Lens Insertion Tool
This is a scleral lens (hard contact lens) insertion tool. Designed for my mother who has a rare form of macular degeneration and double cornea transplants. Scleral lenses can be difficult to insert due to their size, shape and need to be…
- Pobrania
- 60
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFilmmax
Cable insertion aid for textile sleeve
Hi everyone, I was upgrading my Prusa MK3 to a MK3.5 and there it was: Step 16 Wraping the Textil sleeve. Every time I have some trouble to wrap the sleeve to the Heatbeds cable. So I created this time a little helping thing: How to use:…
- Pobrania
- 56
- Polubienia
- 5
- Ocena
- 0
P
Printablesmartona
Gridfinity Magnet Insertion Tool 6x2 Tip Remix
It's a drop-in upgrade of EmGi's 6x2Tip.stl. The better printing orientation is kind of whatever, but I really like that I can now see the magnets as they're being placed. The STL is oriented for printing. I printed two copies on the 1st…
- Pobrania
- 55
- Polubienia
- 10
- Ocena
- 5
P
PrintablesHribaDesign
AM4 insertion for Backplate
I originally downloaded a similar model, but it was too tight and could not be used on my backplate. That's why I made my own and allowed for shrinkage after printing when designing. Fits perfectly on my backplate. I recommend printing…
- Pobrania
- 53
- Polubienia
- 6
- Ocena
- 5
P
PrintablesThorsten Götz
Scheppach HBS 32 vario zero clearance insertion
English The HBS 32 vario band saw from Scheppach has a round plastic table insert. This naturally wears out during normal operation. Fortunately, some spare parts are still available for this old machine from the early 1990s. Parts such…
- Pobrania
- 50
- Polubienia
- 2
- Ocena
- 5
P
PrintablesGeraffel
Spoke Nipple Insertion Tool Sapim Polyax with Slot
Tool for Sapim Polyax Nipples with slot to guide the spoke nipple through the rim to the spoke and screw on the first few turns. Replaces the cut-off cotton bud for me. I would have liked to make it round, but it prints much better and…
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 5
P
PrintablesLaisch
Heat Insertion Tool Holder
Holder for the heat inserts insertion helper tool. Can be mounted with two screws to the wall. Print it in standing position otherwise the clamp may fail If the clamp is too tight for the soldering tip, you can heat it a little bit and…
- Pobrania
- 44
- Polubienia
- 19
- Ocena
- 0
P
PrintablesPhil Caruso
Magnet Insertion Tool (Low Profile)
This Magnet Insertion Tool (Low Profile) simplifies the task of inserting magnets in 3D prints - ensuring that the polarity of all inserted magnets is the same. Its low profile makes a quick and easy job of inserting magnets during a…
- Pobrania
- 43
- Polubienia
- 23
- Ocena
- 5
P
PrintablesRobagon3D
Magnet Insertion & Drill Guide Tools For Axolote Hex Walls
I've included a wall B test piece to try out here. The rest of the parts are available on my Gumroads Store , pay what you think it's worth! These are magnet insertion and drill guides tools for Axolote Hex walls styles A, B, C, BAB, CC,…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
Printablessagan
Linear rail bearing carriage insertion tool (Prusa XL)
Tested on Prusa XL Z axis rails. Tool to insert the linear rail carriage on the rail without losing balls.Tested on Prusa XL Z axis rails. Tool to insert the linear rail carriage on the rail without losing balls. The opening width of the…
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 0
P
PrintablesClockman
Scleral lens emergency insertion/removal kit
A kit to put in a bag and forget about for emergencies where you really need to clean your eyes and contact lenses. I printed mine in ABS, but PETG and PLA should work just fine as well.
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJustin Richards
remixed cubes for easier number insertion
simple remix to allow numerals to pushfit easier
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 4
P
Printables3DwasNun
Fiber optic SC connector insertion aid
Fiber optic SC connector insertion aid Insertion aid for SC connectors in empty conduits, holes in walls, or shafts. Since the ONT should not remain in the basement, I created this insertion aid. It is important to me in this project to…
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesHazzardness
Magnet Insertion Tool 5x1LeverExtension - vThicc
I love this tool. It's as useful as it was fun to build. My only issue was that the 5x1LevelExtension part is so thin, it takes almost no resistance to bend it, so I decided to make a Thicc version, seeing as there's plenty of room inside…
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMarco
Supporto Inserti Esagonale Cacciavite/Giravite/Trapano HSW
Supporto per parete attrezzata HWS Honeycomb Wall Storage per 30 inserti esagonali per cacciavite/giravite o trapano/avvitatore. Gli inserti supportati sono standard da 6.5mm I fori per viti M4 consentono di collegarsi con la parete…
- Pobrania
- 34
- Polubienia
- 21
- Ocena
- 0
P
PrintablesCDavid
Extruder Micro JST MX 1.25mm insertion tool + Wire Picks
Extruder Connector tool, to help align extruder motor connector onto the board and wire picks for wire restraint pathway placement. The connector tool has two ends with opposite shelves. One end works best with the motor plug. “M” Tool…
- Pobrania
- 33
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDS Prints
Corner Profile Cap/Lid for 38x38 (15.5mm Insertion)
This post is basically for a cap to finish off some aluminium corner profiles I am using. There is a CAD file that replicates an Aluminium or aluminum Corner profile for a 38x38 dimension that fits 15.5mm MDF or Plywood. The profile is…
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
PrintablesOggie
90 Degree Quick Release Connector Semi-Rigid Plastic Fuel Line Insertion Tools
I needed to replace a 90 degree quick connect fuel connector that was leaking in my car (not good!). This connector needs to be inserted into some semi-rigid plastic fuel line (PA11-6). As I don't have the official tools to do this, I…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesArgger
Filament Sharpener (for Easier MMU Insertion)
This model can hold a Faber-Castell sharpener and catch the filament shavings when sharpening. Setup: Simply insert the sharpener into the hole and screw down the lid. Usage: To sharpen the filament, insert it through the hole and twist…
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 5
P
Printablesrolf_prusa_printer
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion Category: Containers
- Pobrania
- 28
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAPrinterInTheHills
color coded snowman eyes and buttons for easier insertion
i was assembling some snowmen, and trying to figure the eyes out, was driving me nuts. so i printed a new batch, first TWO layers are white (so that filament in bambu could stay the same after slower first layer). buttons not as…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
Printablesracerethan
Lynx AR Grip Combined Backbeaver and Cuts for Trigger Pin Insertion
A back end grip that combines the beavertail and the back grip together, as they had no way to really attach. The front grip has 2 variants to expose the trigger pin hole left or right. It was impossible to secure the grip with the…
- Pobrania
- 27
- Polubienia
- 9
- Ocena
- 0
P
PrintablesVolksswitch
nut insertion tool
Used to aid in M5 nut insertion when printing the top component of the Easy Measurement Tool (https://www.printables.com/model/204043-easy-measurement-tool)
- Pobrania
- 27
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKevinWRay
Fidget Spinner 608 Bearing Insertion Tool
This tool allows safe and easy insertion of the bearings into a fidget spinner. Bearing insertion force is only applied to the outer bearing race.
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
Printablesyawkat
Magnet insertion jig for gridfinity GridFlock (obsolete)
Obsolete: GridFlock now has its own magnet jig, with better compatibility. Instructions GridFlock is a gridfinity-compatible baseplate generator with easy press-fit interconnect. It also features friction-fit magnet slots inspired by…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 4
P
PrintablesJeff
Magnet Insertion Tool Body for 8 x 3 mm magnets & Gridfinity Container
I made adjustments to the body and container design for the 8 x 3 magnet (as EmGi had stated, it had not been tested).
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDarthKaker
Magnetic Magnet Dispenser & Applicator – Clean & Precise Insertion
[EN] Stop fighting with magnets and messy glue! This tool is a game-changer for anyone who incorporates magnets into their 3D prints. It allows you to load a stack of magnets (e.g., 15 pieces of 4mm diameter) into a dedicated magazine and…
- Pobrania
- 25
- Polubienia
- 10
- Ocena
- 0
P
PrintablesSamuel Bloch
Magnet Insertion Tool v2 Skadis Mount
Hook the Magnet Insertion Tool to the Ikea Skadis board. Print the model without support. There are break away supports which are marked by an “X” (see picture below).
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesIdiot Engineering
Pcb Holder Depressor for easy insertion
This is a small part that allows you to easily press down the securing part on the pcb holder.
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
Printablesjdubs
Model M Spring Insertion Tool
The IBM Model M keyboard uses a buckling spring mechanism to achieve the classic clicky feel and audible feedback it's famous for. A spring is located under each key and mounts onto a pivot plate (aka hammer/platter/lever/flipper) via a…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
Printablesdf34tAlessandro
PORTA BIT/ INSERTI
Print Settings Printer brand: Anycubic Printer: Kobra 2 Infill: as you like Filament material: as you like, Filament brand: as you like Filament color: as you like
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
Printablesrolf_prusa_printer
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion Category: Containers
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDanHas
2mm Diameter x 1mm Magnet Insertion Tool
Just a simple magnet tool for inserting 2mm diameter x 1mm tall magnets. One has a tiny recess with a positive symbol and the other has a negative symbol. So either print those symbols with multiple colors or just print the entire thing…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
Printablestrses
Magnet pole finder and insertion tool - single-color and multi-color
Magnetic pole finder inspired by Clough24's video on YouTube . A magnet is inserted into the tool during or after print (see versions) and the tool can from then on be used to easily determine the poles of any magnet you're using. It can…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDJG3
Filament Sensor Funnel (Insertion Guide) for the PC4-M6 Flex Filament Sensor Bypass
Some would consider the process of feeding flimsy filament through a 2mm hole less than ideal. Surfalex2000 published a remix of a filament guide which simplifies this process. Adding flexible filaments to the mix, it is further…
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
Printablesradimklaska
Onewheel hypercore axle plug and insertion tool
Plugs should be printed with TPU. The tool does not really matter, anything non-flexible will do. :) Plugs to keep the silicone in place when changing the motor cable. plug with a hole - cable side full plug - empty side A tool to insert…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKuran Kaname
Bosch Washing Machine Door Prop Without Inserting In Hatch
Remix of the original model that instead of inserting in the hatch, it's just a circle that holds it open
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAl Popovic
Cart coin & belt insertion
Cart coin & belt insertion, to be used for shopping carts, but also for making seat belt alarm off ( only for parking or short car moving, not while driving ! )
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesShopMonkeyEngineering
Pressure washer pump seal insertion tool TS1810
Tool for installing high pressure seals in a pressure washer. Specific to the general Pump TS1810 but I included the F360 files if you want to modify it for your needs. Works like the Intergroup pump ZMVTOOL. Printed at a low layer height…
- Pobrania
- 17
- Polubienia
- 4
- Ocena
- 5
P
PrintablesMIHAI_T
Tray with filament insertions (rectangular) 80x80
A great idea to save leftover filament is to insert it into your prints. Above is a stackable tray design that uses small pieces of filament to create an unusual texture. Print include 2 parts, base tray , that should be one and stack…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHobbyBros
Tool For Inserting Tire On RC Car Wheel
Basic model, can be used to tuck the bead on R/C car tire.
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPhil Gardiner
BMC A series Cam bearing insertion/removal tool
The original design is based on a drawing presented on the MGAguru website. it is suggested that this too be made from a soft aluminum and as I don't have a lathe I wondered if a tool set made from PETG would do just as well. To get a…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMrMaus
Insertion Aid for "filament buffer (airtight, compact & easy to fill)"
It helps me Insert the Filaments. I use this when there is a stubborn one. Just insert to tuhe side of the Silicagel box and it works. Nothing special for Printing. I use PLA and that works Fine.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMr.Breaker
Magnet Insertion Tool v2 Pegboard Mount
I edited the Skadis double mount for the magnetic insertion tool so it can be mounted on a regular pegboard. Printed with supports for the pegs.
- Pobrania
- 15
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMajor Hack
2x1mm magnet insertion tool
Insert the magnet in the hole, glue it in place if it's a bit loose. Then, you can attach another magnet to the one in the holder to insert it where you want it. This should work for 2mm x 2mm magnets also, but I haven't tried it. I made…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesrolf_prusa_printer
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion Category: Containers
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJoker
PC4-01 mount with Inner plug for easy inserting filament
PC4-01 mount with Inner plug for easy inserting filament Buy me a coffee: https://ko-fi.com/jokereuc
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBotRen
Portapunte per Inserti zigrinati a caldo
Portapunte per Inserti zigrinati a caldo
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRambo
C5W Lamp insertion tool
And I mean really annoying, annoying enough that I made 5 versions of this just to get two lamps replaced. Fusion model if you need to adjust angles or something https://a360.co/3OaDSRO
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAdam
McMaster Carr Threaded Insert Tips Holders - Inch & Metric, Insertion & extraction tips
Holders for the insertion and extraction tips available from McMaster Carr. Yes, a lot of them are duplicate parts but in a big lab with shared resources it's nice to not have to think about what tip to use. I printed them on their sides…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printableslucan07
Scalpel printed on Da Vinci printer inserting Stitch Cutter Blade after pausing
Hooked Scalpel with lid for precise work Instructions Printed and paused to place blade which is then inserted into Void. Designed to use surgical stitch cutter as blade as they are very sharp and perfect for delicate precise work.…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
Printablessurki2.5
Mini printbed scraper prepared for magnet insertion
Just print in high resolution as recommended for the original and add a stop in the Prusaslicer to insert the magnets during the printing process. Holes fit 4x2 mm neodymium magnets. Since the tool is light no stronger magnets needed. It…
- Pobrania
- 12
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJoe Brooks
Ball Bearing removal/insertion jig
I needed to clean some old ball bearings, and hands were too shaky to do it by hand. figured I could make a jig on tinker CAD, and it works well. Simply remove the collar around the balls, place the jig onto the side of the bearing. push…
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAbbey-Lubber
DIP20 IC Insertion Tool
I may have had a couple too many ICs to insert in circuit boards… and trying to get the pins to go in straight was annoying me. I designed this tool in an attempt to make my life easier. Quickly pop an IC in the tool - tool bends IC pins…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTaffert Designs
Solid Wall Case for Magnet Insertion Tool
Modification of the 6x3 case, (probably will fit others) A little easier to print in ABS with less open areas.
- Pobrania
- 11
- Polubienia
- 4
- Ocena
- 0