Wyniki wyszukiwania: itho

Small tractor - flexi excavator (printed in one piece without supports)

Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…

Starwars deathstar lithophane lamp

A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…

Dune Ornithopter Kit Card

Kit card model of the two-seater ornithopter from Dune (2021). Can be printed in a single piece kit card or as separate pieces in different colours, at a different scale or to replace a piece that broke. Tested to work at 75% scale for…

Fabergé Egg Maze Container (with or without mmu)

Inspired by Russian Fabergé eggs, many of which could open up to reveal a surprise inside. This egg features a maze that must be solved to access the inner compartment. Printing Use a 0.4mm nozzle and a layer height less than 0.2mm There…

Lithophane Jupiter Lamp

Cobbled together in PrusaSlicer Jupiter with the socket, printed fine from my side and looks great. Will print fine in PLA, I used Eono White PLA in 0.2mm layer height. For the light use for best fitment a E14 bulb or a small E27, the…

Fancy Lithophane Frame

Remix of my IKEA Halvklart lithophane picture frame New back design Added more stars New button What you need Printed parts (frame, cover, button) IKEA Halvklart USB LED spolight Don't forget to look at the remixes that use different…

Display Stand for LEGO Ornithopter

Hello fellow makers, I assembled the Lego model of the dune ornithopter as soon as it arrived, and realized quickly that it is too big to stand on top of my IKEA Kallax shelf with the landing gear down. Although a beautiful pose, I wanted…

Drill Dust Collector (use with or without a vacuum - incl. alignment marks)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Little Bobcat - (printed in one piece without supports)

[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…

Lithophane Books (Iron Flame)

Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…

150mm Moon Lithophane Table lamp

This is a remix of the Moon Lithophane to 150mm, with a base designed in OpenSCAD to fit an Ikea Stråla lamp cord. There's a hexagon pattern on the base. You'll need a suitable LED lamp, ideally a P45 (45mm pear-shape) bulb or something…

Wet palette - Lid without PRUSA logo

For easier printing I removed the Prusa Research logo. Very, very sorry Josef 😀. Note: Please don't forget to leave a rating or a comment. Feedback is important for me Thank you very much. Happy printing!

Winter themed Lanterns for IKEA LED candles //Ladovská zima - lithophane na led svíčku + PF 2022//

Christmas and Holiday themed tealight lantern lithophane ball. Lantern fits LED tea candle IKEA GODAFTON 4 versions: simple image with NO TEXT: "svicka_panorama.stl" simple image WITH PF2022 TEXT: "svicka_panorama_PF_opr.stl" detailed…

Flexi excavator (printed in one piece without supports)

I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)

PSA: State of AI : Dragon Egg : With and without Displacement

PSA: State of AI : Dragon Egg : With and without Displacement TRIPO used to create : “Cute Baby Dragon hatching from egg, realistic, masterpiece, HDR.” used HD texturing option We have entered a state wherein the use of displacement with…

Lithophane Tutorial and Calibration Toolkit

Imagine walking into a UV lit location wearing a picture of Darth Vader or Spock around your neck! It will immediately light up and will show everyone that the Force in fact is with you or you find something fascinating while raising an…

Mini car - Tow truck - printed in one piece without supports

[ENG] Simple tow truck with folding ramp and rotating wheels printable in one piece without supports. The model is designed for printing on the side when all parts (car, wheels and ramp) are printed at once. The model can be printed both…

Lithophane Stand

Lithophane stand for 3mmx130mm lithophanes. designed for use with LED tealights found here: https://www.amazon.com/gp/product/B008TLZSKY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Blunted Folding Knife Remix without Card Kit

This remix of https://www.printables.com/model/193429-blunted-folding-knife, removes the punch out / card kit elements to make it even easier and quicker to print.

WaveShare 4.2“ e-Paper case - symmetrical and without holes

WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…

LEGO set 10330 McLaren Senna Formula 1 car tyres/wheel with or without logo's

LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…

SPoRK3 (also without label / clip)

SPoRK3 (also without label / clip) It's a spoon? It's a fork? In any case it's 3D printed! Due to its asymmetrical shape, it can be optimally printed lying on its side. Note: Only use food-safe plastics Clean and disinfect thoroughly…

Hat holder without screw hole

Remix of "Hat Holder" by Bucio.Boi. Simply filled in the screw hole using Tinkercad so it can be mounted with command strips or double-sided tape instead of screws. This avoids having to drill into your wall. No other changes were made to…

Brush pot 28 slots (version with and without Ikea Skådis stand) - Pot pour pinceaux 28 slots (version avec et sans support Ikea Skådis)

[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…

Star Wars Grogu Baby Yoda Sculpture Figure Multi Color without MMU

I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup

Multi Color Test Model for Single Extruder without MMU

Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…

The Witcher 3 – Geralt of Rivia Lithophane

Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 171mm x 119mm x 6mm (6.73 x 4.67 x 0.24 inches) Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a…

spinning top / gyroscope, three-part, can be assembled without gluing

This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…

High capacity bitholder for MiniWare ES15 cases | MiniWare ES15 Bithalter mit hoher Kapazität

These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…

Minimalist City Map Lithophane Lamps

Thank you @FritzPeppone for the detailed guide of creating city map lamps. https://www.printables.com/model/1213781-minimalist-city-map-lithophane-lamps-tutorial I startet with Munich and Zurich. and I will add more if I have time The…

Frame for ultrasound photos (without MMU)

[EN] Multi-colour ultrasound photo frame adapted for printing without MMU by changing filament layer by layer (M600 or by hand). The model is adapted for printing with a layer height of 0.2mm (then 3 layers per colour which is enough to…

Lightsocket mount for Designer Lithophane Moon Lamp

Not sure if this is a good idea or not, so think about whether or not to you want to take the risk of using this. USE THIS AT YOUR OWN RISK! You could shock yourself attempting to install it. I used it with a LED bulb that does not get…

Honeycomb Wall Mounting Without Screws REINFORCED

I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…

Miracle Candle - (Encanto Lithophane candle)

A “Miracle Candle” from the Movie Encanto. Great to throw in tea candles (with some foam) as a prop for a toddler birthday party :-). I decided to leave it open on both ends so that I can easily install\remove the LED tea candles and foam…

LED Puck Holder for Lithophane Prints

This is a small LED Puck holder I designed for my lithophane prints. I wanted to use a battery powered light but needed a way to stand it up. I like that I can control the distance of the light from the lithophane print for the best…

Držák svítilny na hasičskou helmu bez šroubů (Fire helmet torch holder without screws)

The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí

The Tortured Poets Department - Lithophane Taylor Swift

The Tortured Poets Department - Lithophane Taylor Swift made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)

Bola de Navidad Litofanía Personalizada / Custom Lithophane Christmas Ball

Bola de Navidad Es una bola diseñada para insertar una imagen de una litofania. La bola es una semiesfera con un agujero trasero para insertarle una luz led del árbol de navidad y poder disfrutar de la imagen en el árbol. Impreso en PLA…

Curved Endgame poster Lithophane

This is the Avenger end game poster lithophane

UofH UH University of Houston logo with or without captured magnets

UofH UH University of Houston logo with or without captured magnets. When slicing the captured magnet file be sure to set the color change just before the cavities are covered. It will be a snug fit with a 2mm magnet. Be sure to check the…

Clairvoyance for 6 mm Scale Wargames - FDM Printable Without Supports

As with my other 6 mm scale miniatures I am trying to challenge what is possible with regular FDM printer (Prusa MK4 in my case). This over-weaponized mech is my original creation inspired by grimdark fishfolks and that mech wargame…

Stand without Text (Remix)

For everyone that want a cleaner look of the stand. If you like my work consider Buy me a coffee 😊

Hamster wheel 130mm diameter with spindle without bearings

The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…

Iwo Jima (Lithophane)

here is a Lithophane of the Iwo Jima soldier scene

"Print in Place" Scalable Prusa-Box without compartments (remix)

This is a quick remix, done in PrusaSlicer of the cool model from @JAV3D . Original model with the compartments can be found here: https://www.printables.com/model/695171-print-in-place-scalable-prusa-box

Mk3.5 LCD Cover Multicolor Without MMU

Mk3.5 LCD cover with printable version of the sticker, USB symbol, and reset button. I've noticed the footer gets slightly cut off at certain angles, so the LCD area is slightly expanded compared to the stock R3 version. A 0.25mm nozzle…

Mickey Mouse Public Domain Image Lithophane

On 1 January 2024, the Mickey Mouse image that includes “Steamboat Willie” entered Public Domain in the United States. This is a lithophane of Mickey as Steamboat WIllie.

Creality Ender 3 S1 Pro 2-3kg Filament holder adapter (bearings or without bearings)

Creality Ender 3 S1 Pro/Plus Filament holder adapter 2-3kg bearings or use without bearings (cylinder name “tubus 2-3kg use without bearings” ) It is designed so that the coil easily unwinds from the holder and does not tend to get stuck.…

Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes

Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes Dual display version of my “ WaveShare 4.2“ e-Paper case - symmetrical and without holes ” display case as desktop variant. It can hold up to 2 ESP32 controllers and…

Raspberry Raspiblitz Case V1.1 with and without fan mount

Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…

Halloween Mug Shot Friends Lithophane

Lithophane mug shot of all the horror characters by year. Enjoy!

Prusa Core One Protect / Now with Mulicolor without MMU

I noticed on my Core one that you can already see it on the inside wall where you often touch it with the sheet, which unfortunately cannot be avoided. That's why I designed this protective cover, which can be easily attached with…

President Donald J. Trump Lithophane

Europa (140mm) for Solar System Lithophane collection

I’ve seen that Solar System Lithophane Planet Lamp Collection by @FritzPeppone is lacking my favorite moon so I decided to add one. Moon is roughly 140mm so it’s compatible with Prusa mini and Bambu Lab A1 mini. BTW this model got M75x4…

Screwholder and Bitholder Einhell

A simple screw and bitholder you can attach to a Einhell screwdriver using a M4*20mm screw. You have to pause the print at a certain layerheight and put 3-4 Neodym 10*3mm Magnets in.

Fast connector for WS2812 led strips without soldering

Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…

Ball Bearing Fidget with spikes and without

These are fun fidget toys that I made to practice revolution in onshape and to test printing in place. There are two variants of it one with spikes and one without any. You will need supports to keep the balls suspended in the air to make…

Mountains (Lithophane)

here is a lithophane of mountains

Zelda Rupees with or without Magnets

With or without magnets. Use the magnetic version of the rupees to display artwork on your fridge. Use with my related Breakable Pots for Breakable Pots for Zelda Ocarina of Time 40th Anniversary model: Parts Each magnetic rupee uses two…

Cyberpunk Edgerunners Lithophane Cylinder Spotlight Remix

My first remix, a remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder. Added a top cover ( I glued tinfoil to the inside which amplifies the effect) Tolerances are very high (it's going to be…

Violin hanger without screws/anchors

In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…

Frame for standing table clock without bottom arch

If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament…

Trump 47 Portrait Lithophane

Ramanujan Lithophane

This is a lithophane of the famous Indian mathematician Srinivasa Ramanujan. It was created using https://tool.itslitho.com/CreateModel. stand is a remix of a PSA holder created by Estikuma.

Babyliss Pro 4artist Base (without name)

Description This is a robust and sleek desktop stand specifically designed for the Babyliss Pro 4artist shaver series. Whether you are a professional barber looking to organize your station or a home user wanting to keep your shaver safe…

Tiger Tank Lithophane

I will probably be making more ww2 lithophanes-Already working on a 190

Hrošík magnetka barevné bez nutnosti MMU (Hippo magnet without MMU)

Hrošík magnetka (Hippo magnet) Velikost magnetu: 10 x 2mm Varianta s vložením magnetu (pauza) a s lepením magnetu (až po tisku) 4 barvy filamentu – světle šedá, růžová, bílá, černá Velikost vrstvy 0,2 – nastavení vložení magnetu a výměny…

Sockets and adapter bitholder

This socket organizer is a customized version of Flo's Socket adapter holder design, modified to better suit my impact driver socket set. I had some issues opening and using their FreeCAD file, so rebuilt it in Onshape instead. If you…

clean OLED cover for Prusa i3 MK3/S/S+ or Caribou MK3/S/S+ without text

This is a remix of the original OLED cover from Caribou3D for the LDO OLED display for a cleaner look or to add your own text or logo. I also added the mounts for Prusa i3 MK3/S/S+ (own design based on Caribou parts) and Caribou MK3/S/S+…

LithoBox - Fotokrabička

Jednoduchá fotokrabička Tištěno z PETg, ale asi poslouží i PLA Budete potrebovat: 5x litho fotografii Například přes http://3dp.rocks/lithophane/ Ve sliceru jsem upravil velikost na 100x100mm, tloušťka 2,4 zachována, případně podle…

Lithobox

Box Box was modeled in Autodesk Fusion 360 around Emos LED night light P3310K with motion sensor. Parametric model is provided if you need to adapt it for the different light source. It consists of two parts that can be disassembled and…

Mk3.5 LCD cover printed on MK3S+ without MMU

This is the same as @MalikDrako_2006414 files except the m3f file has been tweaked to print on a MK3S+. So if you are desperate to print on the MK3S+ use this otherwise use the original after upgrading to the MK3.5. I had a lot of…

Practicals Philips Hue Bridge Rackmount V1 (Without Lid)

Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…

Ghost In The Shell SAC 2045 Lithophane

Ghost In the Shell SAC 2045 Lithophane has two layers lithophane.

Lithophane of Me and My Elk

this model was made after a elk hunt in 2022 the lithophane has me and my elk, this model printed ok for me but when it's done it might be a little fuzzy, if you put it in front of a heat gun that will most likely fix it

Lithophane BMTH Nex Gen

Instructions: Lithophane layer height: 0,12mm fill: 15% temperature: 200-215°C speed: default from prusa slicer Frame set print pauze into 41 layer and insert the lithophane layer height: 0,20 fill: 10% perimeters: 2 temperature:…

Mehrfarbige Beschriftung ohne MMU / Multi-coloured labelling without MMU

for English see below Meine MMU3 for MK4 ist gestern gekommen. Noch habe ich keine Erfahrung damit. Allerdings habe ich mehrfarbige Beschriftungen bisher durch eine Intarsienarbeit realisiert. Da ich mir vorstellen kann, dass euch das…

Litho Cat "Onyx"

Its just one lithofane of my cats, in this case is named “Raya” Used cura with 0.2 layer 99 shell for full fil 0% infill

Kochs box without writing

Printing instructions Layers: 0,2 mm Infill: 15% Material: PLA Support: No

Dessicant Box - Prusa Spool without Flange - AMS-Lite

Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…

Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!

Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…

Solar System Lithophane Planet Lamp Collection - ⌀205mm

Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…

Lithophane Moon Lamp with Wavy Stand

I had adjusted/remixed this model to max out the settings on an AnkerMake M5 Printer. The lamp itself couldn't be any bigger due to the constraints of the printer, but it's still just about the perfect size. The adapter for the lamp was…

Phone Holder Phone Stand smartphone holder smartphone stand easy print without support tested

Phone holder universal 28 models. Filament need 10m (0,2mm, 2 perimeters 15% infil). For phones with (max. phone depth 21mm) and without (max. phone depth 9.8mm) cover. A, B, C, D, I, J. K. L, Q, R, S, W, X, Y ……for phones with cover. E,…

Drybox for Prusa Printer Enclosure V2 - without humidity sensor

This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…

Clicker (without supports and gluing)

[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…

Angled fore grip mlok AFG M-LOK without side mounts

Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…

"Snow" Globe Christmas Lithophane

This is a remix from Taylor Herrin . For more info how it is created see at the original model. The sculpture were so nice but I wasn't able to print it due to net errors. So I repaired it with Blender. In addition for faster processing…

Caliper Radius Gauge – Corner Radius up to 130 mm (prints without support)

This radius gauge allows you to determine the corner radius of parts using a standard caliper . Tested with a Mahr MarCal and a generic low-cost caliper – compatible with most calipers. To calculate the corner radius, multiply the caliper…

Box boxes jar jars tin tins easy printable without support tested

1, 3 are covers for boxes 2, 4 are boxes Easy dimensions change. Jars with coil:

"Snow" Globe Christmas Lithophane

"Snow" Globe Christmas Lithophane - A Christmas themed lithophane globe of a winter landscape. The STL file was created using Lithophane Maker Desktop , and the part was printed with American Filament Classic Lithophane White PLA . When…

Pencil Holder pencils holder Pencil Stand pencils stand Pen Holder pens holder pen stand pens stand ofiice organizer desk organizer desktop organizer CASTLE TOWERS easy print without support tested stojan tuzky

Easy printable pencil holder. Size cca 15 x 15 x 12(height)cm. It can be printed without support, because are used max. 45° angles. Filament need cca 50m (0,2mm, 2 wall loops, 15% infill). Tower inside diameter 49mm. Second models:

Sailboat Eyeglass Holder - Prints Without Support

A hanger combined with a small tray. Two-part design that pressed fit together. No support Needed Print parts one at the time to improve quality. Changes Log: Jan02- Slimmer boat, sail, hook; Print optimization. Jan03- Added a bit more…

Caulking Gun Nozzle Unblocker - without support

Caulking Gun Nozzle Unblocker - without support

F1 Tracks with Elevation (and without)

Recently I became interested in F1, so I decided to design some tracks with their elevation. They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are…

PTFE / Cable Clip for Bambu Lab A1 (mini) without AMS lite

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … If you want to use your A1 (mini) without AMS lite the cable…

Baby Yoda without base

Remix of Figurine baby yoda (No base, No parts)

Gothic Lithophane Light

Gothic Lithophane Lamp I wanted to make my Mom a Litophane lamp for Christmas so I looked on thingiverse but none of them were just right so I design my own. I decided to go with a Gothic style design, something really easy to use the dry…

Lithophane Merry Christmas - greeting card

If you want to wish a Merry Christmas in a particular way, this could be for you THE VISUAL EFFECT IS POSSIBLE EVEN WITHOUT LED OR ADDITIONAL LIGHTS AT THE REAR. as you can see from the photos even by exposing it to the sun.With LEDs, it…

Lithophane Lamp

230102: Added Base and Roof with slightly bigger tolerance since some had issues with the fit being too tight, Original parts have 0.5mm overall, parts with increased tolerance has 1mm overall. Base and Frame printed in 0.2 with 15%…