P
PrintablesPeter Farell
Rosie The Jetsons Maid Robot
Rosie The Jetsons Maid Robot
Wydruk około 5,84 €–7,14 € nettoWstępna wycena jednego wariantu
- Pobrania
- 308
- Polubienia
- 89
- Ocena
- 0
Wyniki wyszukiwania: jets
206 modeli
P
PrintablesHarrison
NVIDIA Jetson Orin Nano Developer's Kit Case
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
- Pobrania
- 6964
- Polubienia
- 174
- Ocena
- 4,95
P
PrintablesBaran Tunc
Jetson Orin Nano Case
Jetson Orin Nano case I made for myself. Bottom part has 2 versions for one with PCI slot screw holes and the other is without them. Feel free to delete the mark "gears.com.tr" if you wish. For extra tidiness I punch 2 small holes with…
- Pobrania
- 1207
- Polubienia
- 36
- Ocena
- 4
P
PrintablesTeque5
Jetson Nano Case (Vented)
Jetson Nano Case A minimal snap-fit case for the Nvidia Jetson Nano. The original design ( thing:3603594 ) by ecoiras was very well done, but I prefer cooling over the logo. This is for the 4GB kit with all the ports, but I imagine also…
- Pobrania
- 1012
- Polubienia
- 34
- Ocena
- 5
P
PrintablesFlyAttack
Nvidia Jetson Nano Case – NanoMesh Mini
NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…
- Pobrania
- 849
- Polubienia
- 39
- Ocena
- 5
P
PrintableslayerCraft
Jetson nano case
I found this case for the jetson nano and I liked the pattern. The extra height required for the fan was something I did not need. As such, I made a similar model with the same pattern. The jetson nano pcb requires 2.5mm screws. As I only…
- Pobrania
- 740
- Polubienia
- 22
- Ocena
- 5
P
Printablesreddadsteve
Astro Jetson
Astro Jetson, from the cartoon The Jetsons, by Hanna-Barbera. Astro is the pet of Elroy Jetson. He has a flair for dramatics and is not ashamed to cry for attention. His main form of exercise comes from walking the floating treadmill…
- Pobrania
- 681
- Polubienia
- 194
- Ocena
- 5
P
Printablesreddadsteve
Elroy Jetson
Elroy Jetson, from the comic strip The Jetsons, by Hanna-Barbera. Elroy is a six-and-a-half-year-old boy and is the only son and youngest child of George and Jane Jetson. He is highly intelligent and an expert in all space sciences. He…
- Pobrania
- 645
- Polubienia
- 173
- Ocena
- 5
P
Printablesreddadsteve
George Jetson
George Jetson, from the comic strip The Jetsons, by Hanna-Barbera. George resides with his family and his dog Astro in Orbit City in the future. His personality is that of a well-meaning, caring father, but he is often befuddled and…
- Pobrania
- 645
- Polubienia
- 181
- Ocena
- 4,93
P
Printablesreddadsteve
Jane Jetson
Jane Jetson, from the comic strip The Jetsons, by Hanna-Barbera. Jane Jetson is George's wife, mother of their two children, and a homemaker. Jane is obsessed with fashion and new gadgetry. She is a dutiful wife who always tries to make…
- Pobrania
- 582
- Polubienia
- 140
- Ocena
- 5
P
Printablesreddadsteve
Judy Jetson
Judy Jetson, from the cartoon The Jetsons, by Hanna-Barbera Judy is the daughter of George and Jane Jetson. She is a typical teenage girl. She is obsessed with boys, rock stars, clothes, and loves to hang out with her friends from Orbit…
- Pobrania
- 553
- Polubienia
- 147
- Ocena
- 5
P
PrintablesCap'n Corny
JETSTREAM 13 - a full Dummy 13 conversion!
The Colossus has fully overtaken the front lines. The smaller, slower war machines stood no chance. Faced with the possibility of losing the war entirely, the 13th War Council gathered around the idea of an airborne Dummy arrangement.…
- Pobrania
- 492
- Polubienia
- 164
- Ocena
- 4,14
P
PrintablesFlat Badger
NVIDIA Jetson Orin Nano Developer's Kit Case no side holes
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. I run mine in headless mode and will not be using either the camera slots or GPIO pins, so this remix changes that. You still need the base from the original. This remix…
- Pobrania
- 438
- Polubienia
- 11
- Ocena
- 5
P
PrintablesTheBavarianModelMaker
RC JetSki
This JetSki is designed to be printed on a PrusaMini and therefore cut into mutiple segments. Parts List Every stl-file printed once 1x Brushless motor 3652 3000 KV 1x Midi-Servo 1x rubber seal 1x 3mm stainless steel shaft 1x 3mm o-ring…
- Pobrania
- 438
- Polubienia
- 61
- Ocena
- 0
P
PrintablesUmer Nawaz
Jetson Orin AGX Mount
Simple mount for the orin to attach to any other objects. Will require longer bolts than those removed from base. There is no reason StereoLabs should sell a mount for 300$.
- Pobrania
- 362
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDamian Dabrowski
Ender 5 Max tool head cover with integrated V8 air jets
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…
- Pobrania
- 358
- Polubienia
- 22
- Ocena
- 5
P
PrintablesLuKowalski
Ejection seat for L-39 Albatros jets
This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as…
- Pobrania
- 324
- Polubienia
- 14
- Ocena
- 0
P
PrintablesCLOUDLR
New York Jets Logo (2019 - now)
The current logo of the New York Jets, which has been used since 2019.
- Pobrania
- 312
- Polubienia
- 19
- Ocena
- 5
P
Printablesdefolsher50
Jetstream Sam's Murasama for dummy 13 *WAIST-MOUNTED SAYA*
When your dummies just need a bit more bloodshed.
- Pobrania
- 311
- Polubienia
- 130
- Ocena
- 4
P
PrintablesKonstantinos Kampanis
jet organizer box for rotax max jets
The "Jet Organizer Box for Rotax Max Jets" is a 3D model designed to provide a practical and efficient solution for storing and organizing jets used in Rotax Max engines. This meticulously crafted 3D-printable design offers a compact and…
- Pobrania
- 296
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMax Siebenschläfer
Din-Rail-Mount Nvidia Jetson Orion Nano
A small 3D print to be able to fix a Nvidia Jetson Orion Nano to a Din rail. Super easy and fast print. If you like to, check out my other designs too!
- Pobrania
- 288
- Polubienia
- 19
- Ocena
- 0
P
Printablestrisha
NVIDIA Jetson Orin Nano case
NVIDIA Jetson Orin Nano case optimized for cooling, and minimizing plastic. Thin 1 mm top and bottom, and 2 mm walls. Requires 4x M4 screws that also act like feet.
- Pobrania
- 287
- Polubienia
- 8
- Ocena
- 5
P
Printablesreddadsteve
The Jetsons Logo
The Jetsons Logo This logo can be used along with all my previous Jetson's models to create a complete display. The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued…
- Pobrania
- 286
- Polubienia
- 108
- Ocena
- 5
P
PrintablesAaronG
NVIDIA Jetson Orin Nano Developer's Kit Case for Adafruit Can PAL (TJA1051T/3) & Honeycombed bottom
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
- Pobrania
- 225
- Polubienia
- 8
- Ocena
- 4,67
P
PrintablesModel Magic
The Jetsons - George, Jane, Judy, Elroy, Astro and Rosie - 1962
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 224
- Polubienia
- 37
- Ocena
- 0
P
PrintablesYan1 ALAN
7 Inch Raspberry Pi Touch Screen 1024x600 IPS LCD with Speaker for Raspberry Pi 5 4 3B+ 3B / Jetson Nano PC Secondary Screen case
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
- Pobrania
- 222
- Polubienia
- 23
- Ocena
- 0
P
PrintablesBrandonN
NVIDIA Jetson Nano Mount & Standoffs
A small combination mounting bracket and standoffs for an NVIDIA Jetson Nano developer kit. Mounting holes are 5mm, or fit a #10 imperial screw. Print at whatever settings you like, no need for supports.
- Pobrania
- 218
- Polubienia
- 6
- Ocena
- 0
P
Printablesmicrified
Mounting Frame for Nvidia Jetson Orin Nano
The Nvidia Jetson Orin Nano developer kit comes with the PCB mounted on a plastic frame. This frame hosts both the Nvidia Jetson itself, along with the antennas for the WiFi module (mounted underneath). This model is based on the stock…
- Pobrania
- 215
- Polubienia
- 3
- Ocena
- 0
P
Printableshockeygoalie35
Jetson Nano - Router-style Case
I really liked the look of YUN3D's case, but I had a few issues with it. Ive created my own from scratch, which is why it's a slightly different shape. Added Camera Ribbon slot Added feet Up to 3 configurations: Antennas on Front,…
- Pobrania
- 213
- Polubienia
- 14
- Ocena
- 5
P
PrintablesJust Shapes
Adapter for Uniball Jetstream Refills in Zebra F-701 Pens
The Uniball Jetstream SXR-80 refill lacks the metal sleeve that the Zebra F-701 pen refill usually comes with. This adapter aims to provides a reusable and repeatable solution for the Jetstream refills to replace the Zebra refills.…
- Pobrania
- 203
- Polubienia
- 14
- Ocena
- 0
P
Printablesmarigu
Jetson Nano case with camera
NVIDIA Jetson Nano case with camera holder(IMX219-160IR) I have used small 60x60 CPU FAN as well, you can edit source file if you have different fan or you can use it without fan at all if your Jetson Nano is not running under heavy load.…
- Pobrania
- 194
- Polubienia
- 8
- Ocena
- 0
P
Printablesschiffer-soft.de
Kawasaki SX650 Jetski Car Load System - 3D Parts and Drawings
Hi I would like to introduce my Kawasaki SX 650 Jetski Car Load System. It was born out of the need that I don't have room for a Jetski trailer. So the SX 650 had to be in my VW Touran. I was inspired by the loading system of a wreck…
- Pobrania
- 186
- Polubienia
- 14
- Ocena
- 0
P
PrintablesLuKowalski
Scalable ejection-seat for L-39 Albatros jets
This model is a modiefied version of my earlier posted ejction-seat for L-39 Albatros jet from customwings.cz. This new version is an unmodified scale 1:3.5 seat and I don't use any screws in this version to make it easier to change the…
- Pobrania
- 185
- Polubienia
- 12
- Ocena
- 0
P
Printablespmeineke
New York Jets Logo
New York Jets Logo 1st Layer White 2nd Green
- Pobrania
- 179
- Polubienia
- 21
- Ocena
- 5
P
PrintablesPunkt Sieben
REMIX of Jetson Orin Nano Case without text
I was looking for a jetson orin nano case that allowed to add a SSD including a (one) fan - here it is. Top part here, other items (bottom and bottom plate) from…
- Pobrania
- 172
- Polubienia
- 6
- Ocena
- 5
P
Printablesschiffer-soft.de
Mako Jetboard / JetSurf - Rack / Stand
Hi I designed a stand for a buddy for his mako slingshot jetboards. I haven't tested it yet but I think it should fit so well. I will print the parts in the next days and test them. The base of the stand is about 400 x 400mm. The height…
- Pobrania
- 167
- Polubienia
- 13
- Ocena
- 0
P
Printablesrin_ofumi
Jetson Nano Case for 1st / B01 / 2GB , and MountAdapter
These are the Case with I/O slot cover for the JetsonNano 1st/B01/2GB. It can be fitted with a fan. The SD card is not allowed to fall into the gap. JetsonNano Case for JetsonNano 1st JetsonNano_Case_Case_Top_A is Top Case with Top I/O…
- Pobrania
- 165
- Polubienia
- 4
- Ocena
- 0
P
Printablesvatbrain
Remix of NVIDIA Jetson Xavier NX Case by ysiegel
Remix of https://www.thingiverse.com/thing:4523772 by ysiegel. Changes to bottom: Increased the thickness of the base by 2.8mm and added indentations to hold four M4 nuts to match the VESA 75mmx75mm mounting pattern. Added a 1.6mm deep…
- Pobrania
- 159
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCap'n Corny
Dummy 13 Sword Arm REMASTERED - includes Jetstream/Phalanx 13 versions
Not a huge change, but I felt it was time to update one of my older models. It's simpler to print now, and I smoothed out the end of the blade! The blade now lays face-down when printing; I redesigned the joint where the frame and blade…
- Pobrania
- 152
- Polubienia
- 51
- Ocena
- 5
P
PrintablesDustin
Jetski Front hole grommet
JS550 front hull hole grommet, threaded nut and bolt design, with hole for rope, or trailer mount.
- Pobrania
- 149
- Polubienia
- 10
- Ocena
- 0
P
PrintablesNathan Litzinger
JETSON ORIN NANO CARRIER WITH DIN RAIL MOUNT
Simple carrier for the NVIDIA Jetson Orin Nano Developer kit carrier board with detachable DIN rail mounts. The lid is secured to the top of the carrier with four M3 screws. The bottom DIN rail mounts have space for an M4 nut, and are…
- Pobrania
- 145
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPowerplay
Wolfbox MF200 Jetstream V5 -252g Schubkraft-
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
- Pobrania
- 137
- Polubienia
- 27
- Ocena
- 5
P
PrintablesMatt Hawley
Yakima JetStream Roof Rack End Cap Replacements
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…
- Pobrania
- 131
- Polubienia
- 16
- Ocena
- 0
P
PrintablesAtomicGyroscope
Jetstream Sam's HF Katana - Murasama
This is one of the first models I've made i am a amateur and any recommendations are appreciated The Sword is 110cm long or about 43 inches This Model will be updated and improved over time. The sword is cut into printable bits including…
- Pobrania
- 124
- Polubienia
- 16
- Ocena
- 0
P
PrintablesYoshimi Koyama
Jetson TX2 case cover
Characteristics: Has access to many common ports that you may use frequently. Include: 4 tactile switches, J21 and J26 GPIO headers, SATA port, heatsink and fan, onboard camera, LAN port, SD card reader, HDMI port, USB3.0 port, micro USB…
- Pobrania
- 118
- Polubienia
- 1
- Ocena
- 5
P
PrintablesD3DPrint
George Jetson – 3D-Druckfigur
Diese stylisierte Figur zeigt George Jetson – den ikonischen Vater aus der futuristischen Zeichentrickserie „Die Jetsons“. Die Figur ist perfekt für Retro-Fans, Sammler und Sci-Fi-Liebhaber. George steht auf einem stabilen Sockel, mit…
- Pobrania
- 113
- Polubienia
- 24
- Ocena
- 0
P
Printablesronenbl
Seadoo jetski GTX Start button TPU
Seadoo jetski GTX Start button TPU
- Pobrania
- 113
- Polubienia
- 9
- Ocena
- 5
P
PrintablesTiago Jesus
Nvidia Jetson Nano 2GB case
Slim case for the Nvidia Jetson Nano 2GB version. I just enlarged the mounting holes on the board, with a drill, to use 3mm screws as I have a lot of them. I used M3x6mm screws to mount the board and the lid into these brass inserts. The…
- Pobrania
- 111
- Polubienia
- 12
- Ocena
- 5
P
PrintablesRaleigh3DDesign
Jetson Thor Developer Kit Enclosure – Free Press-Fit Case
First working 3D printable enclosure for the brand-new NVIDIA Jetson Thor Developer Kit! Features (free version): – Simple press-fit / snap-fit design – Open bottom (rubber feet sit on desk) – Minimal supports required on port holes only…
- Pobrania
- 109
- Polubienia
- 2
- Ocena
- 0
P
PrintablesStanislau Shchahliak
NVIDIA Jetson Orin Nano case with external antennas
This is a compact two-piece case for the NVIDIA Jetson Orin Nano Devkit intended for use with external antennas, and without the stock plastic frame. All other cases I've found were intended for use with the stock plastic frame and…
- Pobrania
- 107
- Polubienia
- 4
- Ocena
- 5
P
PrintablesD3DPrint
Jane Jetson – 3D-Druckfigur
Diese Figur zeigt Jane Jetson, die charmante und stilbewusste Mutter der Jetsons. Mit ihrer eleganten Frisur, dem typischen Kleid und der freundlichen Pose ist sie eine tolle Ergänzung für jede Jetsons-Sammlung oder futuristische…
- Pobrania
- 105
- Polubienia
- 26
- Ocena
- 0
P
PrintablesBru034
Minnesota Vikings License Plate - 18JJets
A 3D-printed Minnesota Vikings license plate featuring Justin Jefferson's number 18 is a unique and personalized way for fans to show their support for the star wide receiver. This custom license plate was designed with the team's iconic…
- Pobrania
- 104
- Polubienia
- 8
- Ocena
- 5
P
Printablesvider
Winnipeg Jets Custom Logo
This model is split into multiple pieces to fit on to my Ender 3 Max. You may need to scale it to suit your printer's size.
- Pobrania
- 104
- Polubienia
- 13
- Ocena
- 5
P
PrintablesJohnny Casino
New York Jets Football Helmet
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
- Pobrania
- 103
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTom Anderson (The Real NEO)
Rosie the Robot Card Holder (The Jetsons's maid robot)
A maid robot to display cards Here is Rosie…
- Pobrania
- 100
- Polubienia
- 31
- Ocena
- 0
P
PrintablesAngryEgg42
Jetson Orin Nano Open Housing
This is a housing that I made for myself to keep the Jetson Orin Nano Vertical to increase the air circulation around the SSD, CPU/GPU and try to reduce the desk footprint a little bit. Housing is intended to be a single printed part. For…
- Pobrania
- 99
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGulfstream86
LEGO DUPLO compatible Jetski
Here’s the jet ski that goes with the rescue boat, fully compatible with Duplo. It’s also printed with glow-in-the-dark filament. The model is a single piece, and with a filament change you can easily print it in two or more colors. I…
- Pobrania
- 93
- Polubienia
- 14
- Ocena
- 5
P
Printablesbillyd
NY Jets Coaster 2 &3 Color Print
This is a 100mm diameter drink coaster which is intended for 2 or 3 color printing only. Update 27-4-23: Added model with .6mm thick white bottom for easier printing. Update 10-8-25 Added three color Jets logo for 2025 First two layers…
- Pobrania
- 93
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRiotOne
NVIDIA Jetson Orin Nano Developer's Kit Case Bottom
Fits top part as normal but this version has a hole in the bottom to allow for the 1TB NVME with heatsink which does not fit in the original case bottom.
- Pobrania
- 89
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMichaudtime
Starlord Boot Jets
Starlord Jump Jets from the Movie. Print 2 Thrusters and 2 Holders and bolt it the middle. Easy clip in the back for mounting to a strap or straight on a boot. ENJOY!
- Pobrania
- 87
- Polubienia
- 19
- Ocena
- 0
P
PrintablesRob
Jetson Orin AGX Bottom Cover
This cover protects the open circuit board on the bottom of the Jetson. It's a friction fit, so to remove it, use a screwdriver to ease away each corner.
- Pobrania
- 85
- Polubienia
- 4
- Ocena
- 0
P
Printablesctheroux
Jetson Nano Base Plate
This is a simple base plate for the NVidia Jetson Nano development board. 4 x 4-40, 1/4" bolts are required to assemble it. No support is required. An infill of 20 to 30% is sufficient. This object main web page is:…
- Pobrania
- 85
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRC_master9
Gemini jets main deck loader
I designed this for my 747 and 777 Gemini jets models, it adds a nice little bit of realism to my model airport, for best results: print in orientation shows, without supports
- Pobrania
- 84
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGeoff_B_UK
NVIDIA Jetson Orin dev kit case
Based upon a previous design approach for a Raspberry Pi 4 (see here ), this is another two part enclosure/case now sized for the NVIDIA Jetson Orin dev kit. The design has been made as compact as possible, providing good air flow through…
- Pobrania
- 80
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKkrupins
Nvidia Jetson AGX Orin - PCI Card Support
PCI card support bracket for Nvidia Jetson AGX Orin. 32mm separated holes on each piece allows for two to be printed and mount a 40mm fan between.
- Pobrania
- 80
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPetr Bravenec
Nvidia Jetson Nano housing
Casing for NVidia Jetson Nano, 4GB or 2GB version. Both versions have different connectors. It's possible to mount Wifi module with antennas. The casing can be mounted to DIN rail. Recommended material: PETG. Do not use PLA because the…
- Pobrania
- 76
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMgr. Pavel Krist
LEGO AQUAMAN JETSKI 1941
LEGO AQUAMAN JETSKI 1941
- Pobrania
- 75
- Polubienia
- 15
- Ocena
- 0
P
PrintablesAaron Landy
Jetson Orin Nano Field Kit by implyinfer
Introduction This is the official open-source enclosure for the Jetson Field Kit , a rugged prototyping stack for the NVIDIA Jetson Orin Nano. Designed for edge AI and robotics applications, this case turns your developer board into a…
- Pobrania
- 72
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFloatingCam
RPi Camera Mount for Jetson Nano Case
A Camera mount that slides into the slot of the Jetson Nano Case For the Jetson Nano Developer's Kit This is a mount for the IMX219-120 Camera for NVIDIA Jetson Nano which has the cable on the top side and lens in a different place than…
- Pobrania
- 72
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDIY500AMP.COM
Ultra Lightweight 18650 6S Battery Holder for RC Jets & Drones
🔋 Ultra Lightweight 18650 6S Battery Holder This 6S 18650 holder was designed specifically for high performance applications where weight and rigidity matter: • RC EDF jets • Long range FPV aircraft • High voltage drone builds • Robotics…
- Pobrania
- 70
- Polubienia
- 9
- Ocena
- 0
P
Printableslowboydrvr
NY Jets Fridge Magnet (2 colors)
Another office request: NY Jets - 2 color logo (designed from multi-color printing: MMU2, Palette, etc.). First 4mm is the base (white only), white and green used on last 1mm. I used a stronger, smaller magnet for this one. Here is what I…
- Pobrania
- 67
- Polubienia
- 4
- Ocena
- 4
P
PrintablesDustin
Kawasaki Jetski Lanyard Clip
Not sure what years this will work for, but it's the lanyard clip for my Kawasaki JS550 1989
- Pobrania
- 67
- Polubienia
- 6
- Ocena
- 0
P
PrintablesGhosthippo
Jetsons Space Car
Based on the Jetsons family car from the original cartoon, designed in Tinkercad. Recommend printing at 150% or above, example is 200% to get the engines to print nicely. I printed the hull vertically with the tail on the print bed and…
- Pobrania
- 67
- Polubienia
- 24
- Ocena
- 0
P
Printableslbatalha
IKEA JETSTRÖM Mount
This is a two piece mount for the L2206 JETSTRÖM IKEA light fixture. Drilling 2-4 holes is extremely annoying, with this mount a single central screw is used to affix a center hub with passthroughs for cables, to which the main bracket…
- Pobrania
- 67
- Polubienia
- 4
- Ocena
- 0
P
Printablesmillergren
Wall Mount for RCPowers Park Jets
Free up space on your crowded workbench and hang up your work of art. Uses two nail to attach the mount to the wall. Has curved mounting finger to match that of the curved prop slot used in V5 RCPowers park jets, however should fit any…
- Pobrania
- 64
- Polubienia
- 6
- Ocena
- 0
P
PrintablesStanislav Tsepeniuk
Devastator - Jetson Nano mount plate
Mounting plate for installing Nvidia Jetson Nano on Devastator Tank (DFRobot)
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGeoff_B_UK
fan cooled NVIDIA Jetson Nano dev kit case
Based upon a previous design for a Raspberry Pi 4 (see here ), this is another two part enclosure/case now sized for a Jetson Nano dev kit, incorporating a mounting for a cooling fan - with an additional separate fixing bracket for a…
- Pobrania
- 64
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSalvadori3D
New York Jets Oversized Necklace, Pendant
Here is the awesome looking New York Jets Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or Thangs…
- Pobrania
- 63
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBob
Winnipeg Jets Hockey Puck
This is a really fun Winnipeg Jets hockey puck that you can display in your home or even play hockey with! Print Settings Rafts: No Supports: Yes **Resolution:** any Infill: 20-40% **Filament:** any pla/any black, blue, red Category:…
- Pobrania
- 59
- Polubienia
- 3
- Ocena
- 0
P
Printables3D River Designs
Winnipeg Jets Oversized Necklace Logo
Winnipeg Jets Oversized Necklace Logo that I designed. I hope you enjoy!
- Pobrania
- 58
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTHo80
Light Fighter Jets
Some designs of light fighter jet concepts I created. Not an exact model of any existing plane but roughly represents a 1/100 scale. Please note that changes may occur to models in terms of refinement of the overall shape.
- Pobrania
- 58
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJordi
Nvidia jetson orin nano super frontpanel re-computer case
A frontpanel for the seeed studio case. Mine got delivered with the wrong frontpanel. https://www.seeedstudio.com/re-computer-case-p-4465.html
- Pobrania
- 58
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBrad
Jetson Scooter Brake
This is a custom designed 3d print model for the Jetson Scooter's brake. My son's brake busted and I redesigned it to be stronger than the original using this model, and printed in a fun color. I hope you enjoy. To add stability I used…
- Pobrania
- 58
- Polubienia
- 2
- Ocena
- 5
P
PrintablesTimmyT
Nvidia Jetson Nano 2GB Developer Kit Case
Screw-Free Clip-On Case for Nvidia Jetson Nano 2GB Kit
- Pobrania
- 57
- Polubienia
- 2
- Ocena
- 0
P
PrintablesUnknownPro
Jetson Nano DevKit Case
I wanted the smallest possible case for my Jetson Nano DevKit that gave me a place to mount the antennae for the Intel WiFi card and also allow for access to all the I/O. The board is attached to the base of the case with M2.5 standoffs…
- Pobrania
- 57
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDrumsticknDrumstick
Jetson Bolt Pro battery compartment
External battery compartment for 48V 13S3P battery on a Jetson Bolt Pro. Notes: The good thing with this mod is that the original battery is still available to use as normal. The mod is bolt-on… meaning that nothing has been cut and the…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
Printablesctheroux
Jetson Nano Base with Camera
This is a simple baseplate for the NVidia Jetson Nano development board along with a Raspberry Pi v2.1 camera holder. It can be tilted and panned. To assemble it, you will need: 4 x M3, 6 mm bolts 4 x M2, 4 mm bolts 1 x M3, 20 mm with a…
- Pobrania
- 51
- Polubienia
- 1
- Ocena
- 0
P
Printablese_namics
Stand for Jetson Nano Developer Kit
--- The outer four holes can be used to insert 4xM2 metal threads (e.g. “ruthex M2 Gewindeeinsatz”) and fix the jetson nano developer kit on it with four M2 screws. The inner two holes can be used to fix the stand with two M3 screws on a…
- Pobrania
- 51
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDoomsys
NVIDIA Jetson Orin Nano Developer's Kit More Spaced Bottom Without Screw Holes
This bottom part has more space for mounting thick SSDs. Screw holes changed with studs that fits the original case.
- Pobrania
- 49
- Polubienia
- 0
- Ocena
- 0
P
PrintablesChris
Jane Jetson - Stand
I love Jane Jetson by RedDadSteve. I have her printed and on a shelf in the house for everyone to see. That shelf also happens to be in a “High Traffic" area of my house. I have been nervous that Jane may get bumped and fall off of her…
- Pobrania
- 47
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPéPé Stéf
Embout de Remplacement pour Rampe Désherbage pour pulvérisateur 3 jets - BERTHOUD
Embout de remplacement pour Rampe Désherbage pour pulvérisateur 3 jets - BERTHOUD - Garantie 2 ans (manomano.fr) . C'est embout est introuvable en pièce détachée et c'est souvent un problème.
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 5
P
PrintablesFyrby Additive
Higher Lid For Seeed Studio Jetson J1020, J2021, J2022 With Space For Fan
I am learning AI to try and stay relevant and maybe bring it to some projects. I got a Seeed Studio Jetson device and running it at MAXN and keeping it busy can cause thermal throttling. After attaching a fan there is not enough clearance…
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJadon Ciappara
3D Jetski Keychain
Recommended Print Settings: 0.12mm Layer Height Tree Support Enabled Recommended Length is 16mm Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: No **Resolution:** 0.12mm Infill: 20 Category: Keychains
- Pobrania
- 44
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMqx
Jetson Orin Nano IO Shield
This model is just the IO shield of the Jetson Orin Nano.
- Pobrania
- 44
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRMeuth
Astro: Jetson Nano Game Handheld
The Astro is an open-source gaming handheld based on the Jetson Nano single board computer. It is designed with the goals of performance, ergonomics, and to be built using off the shelf components and 3D printed parts. This is the…
- Pobrania
- 44
- Polubienia
- 12
- Ocena
- 0
P
Printablesegoms93
Jetson TX2 Developer Board Cover
Moved some cutouts to fit the developer board
- Pobrania
- 44
- Polubienia
- 2
- Ocena
- 4