Wyniki wyszukiwania: k3s

Sortowanie

2607 modeli

P
PrintablesPrusa Research

i3 MK3S+ printable parts

All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…

Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
125 427
Polubienia
5185
Ocena
4,95
P
PrintablesPrusament

Tension Meter for the GT2 belts of i3 MK3S+ or Prusa MINI+

The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…

Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
37 072
Polubienia
5941
Ocena
4,89
P
PrintablesKryštof

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Wydruk około 2,82 €–3,44 € nettoWstępna wycena jednego wariantu

Pobrania
34 739
Polubienia
2168
Ocena
4,9
P
Printablesraykamp

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Wydruk około 3,72 €–4,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
11 350
Polubienia
450
Ocena
4,94
P
PrintablesPrusa Research

Spool holder for Original Prusa MK3S+

Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.

Wydruk około 5,01 €–6,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
7255
Polubienia
390
Ocena
4,91
P
PrintablesIts-my-right

Prusa MK3s+ Fan shroud adapted for Mk3s

Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…

Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu

Pobrania
6778
Polubienia
294
Ocena
4,88
P
Printablesdotson90

Prusa MK3S Mesh Side Boxes MMU2S

Just changed the appearance using mesh modifiers in PrusaSlicer. Print instructions Printed using Prusament PETG. Could be printed without MMU. Requires 2 filament changes if you want the multi color.

Wydruk około 7,75 €–9,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3577
Polubienia
695
Ocena
4,94
P
PrintablesCrafty Sven

Thin Quick Hexagon Desk Tidy (Pencil Holder) MK3S

Quickly designed this fairly quick print desk tidy. It has 2 parameters all around so it prints quite fast for its size (around 9 hrs with the included g-code). This is for MK3 only. As soon as you change the scale, the wall would be too…

Wydruk około 8,41 €–10,27 € nettoWstępna wycena jednego wariantu

Pobrania
2958
Polubienia
421
Ocena
4,81
P
PrintablesYosuke

Extruder cable clip for Prusa i3 mk3s

This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2888
Polubienia
587
Ocena
4,86
P
PrintablesPrusa Research

Original Prusa i3 MK3S+ Gift card

Do not cut through all. Best results found to be using a default settings: Layer height - 0,15 quality 0,4mm nozzle Prusament PLA or PETG

Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu

Pobrania
2875
Polubienia
837
Ocena
4,88
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2669
Polubienia
521
Ocena
4,82
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+/MK4 Vibration Damper V3.0

Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…

Wydruk około 5,37 €–6,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2260
Polubienia
585
Ocena
4,88
P
PrintablesYosuke

Squash ball feet for Prusa i3 mk3s

I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu

Pobrania
1801
Polubienia
390
Ocena
4,96
P
PrintablesPrusa Research

i3 MK2S to MK3S Upgrade Printable Parts

Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.

Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1657
Polubienia
58
Ocena
5
P
PrintablesGuZZLo

Bigger Sidebox Prusa i3 MK3S

Bigger sidebox to fit more stuff. Please read print instructions. Print instructions There are two versions of left box, one blocks SD-slot (if you use other method of transferring files) and one with the SD-slot reachable. After feedback…

Wydruk około 7,06 €–8,62 € nettoWstępna wycena jednego wariantu

Pobrania
1562
Polubienia
237
Ocena
4,57
P
PrintablesDennis

Vertical LED Light Bars for the Prusa i3 MK3S/MK3S+

I have a work light over the printer that casts a shadow of the print head and it was very difficult to see what was happening at the nozzle both in person and with the OctoPrint webcam. It's interesting that most of the existing lighting…

Wydruk około 3,89 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1361
Polubienia
338
Ocena
4,89
P
PrintablesShaun Doe

Prusa MK3 / MK3S / MK3S+ LCD cable clip

It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were unsatisfactory to me. The opening of the "hook" should point down for a clean look and easy insertion of the LCD-cable. If this…

Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1284
Polubienia
265
Ocena
4,96
P
Printablesstassek

MK3S black PSU holders

MK3S black PSU holders (top/bottom part) for IKEA lack. To fix the PSU in there are no screws needed, just slide the PSU between the parts.

Wydruk około 9,19 €–11,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1166
Polubienia
144
Ocena
4,9
P
PrintablesRui do Carmo

Squash Ball MK4/MK3s/MK3s+ Vibration Damper V4.0

New version, more improvements (for some pictures scroll down): 100% print in place, NO SUPPORTS!!; Easier to print dovetails - more area to grab on the build plate!; Zip ties no longer optional nor required; Better tolerances - Easier to…

Wydruk około 3,50 €–4,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1155
Polubienia
285
Ocena
4,91
P
Printablesrockethorse

Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 for Octoprint and OctoDash Prusa for MK3s+

LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…

Wydruk około 6,22 €–7,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1054
Polubienia
372
Ocena
5
P
Printableskarelv

Prusa i3 MK3s Raspberry Pi4B case profile mount for octopi

My first remix design for a 3D print! I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer. RPi4B case:…

Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1051
Polubienia
174
Ocena
4,84
P
PrintablesWickedTwister

Prusa I3 Mk3S+ Mosquito Hotend Upgrade

I modified the "R6" Extruder parts that come with the Mk3s+ printers to work with the Slice Engineering Mosquito Hotend. This is only compatible with the 40mm fan. I left a "vent" in the Extruder Cover part. I don't know if this is…

Wydruk około 6,40 €–7,83 € nettoWstępna wycena jednego wariantu

Pobrania
983
Polubienia
120
Ocena
5
P
PrintablesSeemomster

6min MK3S+ Pin-Support Challenge

It is not my own design it is the Pin-Support Challenge by fullcontrol.xyz. Only g-code. I modified the start g-code to be the standart prime line and the end g-code to move the bed a bit. The most differece makes the speed increase up to…

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
902
Polubienia
27
Ocena
5
P
PrintablesTB

Prusa MK3s y-axis belt holder - GT2

I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…

Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
894
Polubienia
135
Ocena
4,76
P
PrintablesNils Kal

MK3 (s+) Stealthburner V0.5 - compatible with MK3s+ Extruder

MK3 Stealthburner V0.5 This is my Stealthburner case mod for the original mk3s+ extruder. Note that this is only a design upgrade and the upper ‘fan’ is actually a extruder visualizer (I may also do a version with an active fan in the…

Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu

Pobrania
831
Polubienia
389
Ocena
4,85
P
PrintablesMW

X-axis upgrade with linear rail, belt tensioner and bearing clamping - Prusa MK3 / MK3s / MK3s+

If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…

Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
794
Polubienia
247
Ocena
5
P
PrintablesLV3D

MK3 / MK3S / MK3S+ X idler with tensioner

Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…

Wydruk około 2,86 €–3,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
769
Polubienia
102
Ocena
4,91
P
PrintablesLiouma

Squash ball feet: the most efficient system for Prusa i3 MK3/MK3S/MK3S+ or any 30 extrusion based printer, 100% printable

If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…

Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu

Pobrania
760
Polubienia
167
Ocena
4,8
P
Printablesdroidik

Prusa MK3S+ retraction tower (PLA, PETG)

0.5-2mm retraction tower that takes about 40 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator

Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
692
Polubienia
18
Ocena
4,67
P
Printablespear3d.ch

Prusa Mini -> MK3s (SmokiStyle) Upgrade Bear

Hi PP i am posting here my project, i am willing to modify one of my prusa mini to direct drive extruder and more sturdy frame like Bear. If you want the Haribo version check it here:…

Wydruk około 17,16 €–20,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
686
Polubienia
144
Ocena
5
P
Printablesgrooveup

Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder

Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder

Wydruk około 4,93 €–6,02 € nettoWstępna wycena jednego wariantu

Pobrania
622
Polubienia
71
Ocena
5
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+ Vibration Damper

Check the latest version here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Yet another SquashBall MK3S/MK3s+ vibration Damper, I had 3 design objectives: Damp the nasty vibrations caused by the…

Wydruk około 6,46 €–7,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
564
Polubienia
126
Ocena
4,71
P
Printablesvisle

MK3S+ Double hook for scraper tool

Two small hooks that rests on top of the PSU and hooks around the frame. Perfect for a scraper or some other tool that you want in short reach. Sporting glorious hexagonal cutouts and a hexagon-shaped hook it is a perfect compliment to…

Wydruk około 1,14 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
537
Polubienia
118
Ocena
4,95
P
PrintablesSneaks

Clip-On Filament Guide for Prusa MK3S & MK3S+ w/ Rotating Head

This filament guide uses a 608 Bearing (22mm OD x 8mm ID x 7mm Deep) to allow the filament guide head to spin freely. Like most things I design - it is over-engineered. I just needed a simple guide to prevent tangling and 20 versions…

Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu

Pobrania
505
Polubienia
175
Ocena
4,95
P
PrintablesNMdesertracer

Prusa MK3S filament holder.

Prusa MK3S filament holder. Print instructions PETG

Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
455
Polubienia
33
Ocena
5
P
Printablesgillis

Stratocaster Knob for Prusa MINI and MK3S and MK4/CORE One

A Fender Stratocaster Volume/Tone Knob :-) Layer height 0.1 mm for best look. For the MINI knob use paint-on support (see Image) Remove the support with a knife or similar. The MK3S knob needs no support. Printed with PETG. Prusa slicer…

Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
452
Polubienia
90
Ocena
4,75
P
PrintablesTobashadow

Prusa MK3S MK3S+ Speed profile + Best Supports settings Combo

Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…

Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu

Pobrania
445
Polubienia
27
Ocena
4,5
P
Printables969493CD10A4

squid game front man mask, MK3S sliced

Takes about 30 hours to print. Just changed from Mini to MK3, adjusted print settings, added decent supports.

Wydruk około 24,17 €–29,54 € nettoWstępna wycena jednego wariantu

Pobrania
411
Polubienia
63
Ocena
4,75
P
PrintablesRyan Millar

Wyze Camera Mount for Prusa I3 MK3S+

This is a remix to an existing camera mount. The remix adjusts the camera height and spacing from the print bed for better alignment with the first layer and to allow clearance for side drawers (the side drawers I've printed are:…

Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu

Pobrania
402
Polubienia
80
Ocena
4,79
P
PrintablesBlackBird11

Original Prusa MK3S+/MK4S Spool Holder Adapter for IKEA Lack Enclosure

I wanted to use the original Prusa spool holder with my IKEA enclosure because the original holder has minimal resistance, making it ideal for smooth filament feeding. Previously, I had printed a different spool holder, which functioned…

Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu

Pobrania
386
Polubienia
80
Ocena
5

MK3S+ LGX Shortcut Compatible X-Axis Upgrade with Tensioner (Bear-Derived)

Background When I first built my Prusa i3 MK3S+ and already having a standard Slice Engineering Mosquito hotend , I opted to immediately upgrade the stock extruder / hotend assembly to utilize Bondtech's BMG Prusa upgrade kit (specific to…

Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
250
Polubienia
53
Ocena
5
P
PrintablesNils Kal

Delta P fan duct for 5020 blower - MK3s+

Delta-P fan duct remix for a 5020 blower, compatible with the mk3s(+) You might need 2 longer m3 screws to hold the fan. Use .3mf for preconfigured settings

Wydruk około 1,45 €–1,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
240
Polubienia
46
Ocena
5
P
PrintablesKorA

eSUN dryer holder for Prusa MK3S or MK4S

Pattern from the website: https://www.thingiverse.com/thing:4904219 Drawn for eSUN eBOX Lite dryer. I've added cutouts for buttons. Printing time for both parts is 12 hours. EDIT: After several days of use, I noticed that I made too large…

Wydruk około 5,28 €–6,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
222
Polubienia
31
Ocena
4,83
P
Printables3DEMS

Mk3s+ to mk4/mk3.9 upgrade printable parts sliced for mk4 prusament petg

Print your upgrade parts on mk4. I found that running mk3 gcodes on mk4 works, but leaves sub-optimal results due to speed and stringing. Ready to print gcodes for mk4 Latest parts at 28/4/24 Settings: 3 perimeters 15% grid infill…

Wydruk około 3,89 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
207
Polubienia
13
Ocena
0
P
PrintablesBukinara

Thinner Fan Guard for Prusa i3 MK3s+

This is a very lightly modified version of J White's excellent fan guard (which is a remix of Der Peiner's). For whatever reason, I did not have enough room on my printer for their model. The printer was detecting crashes and too short of…

Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
194
Polubienia
35
Ocena
5
P
PrintablesNat

MK3/MK3S Side Filament Guide

For those who have their spool to the side of their printer, this is a simple and elegant solution to your guide's needs. I liked the original, but I kept forgetting to thread the filament through before loading. I remodeled it to fit a…

Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu

Pobrania
185
Polubienia
31
Ocena
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
179
Polubienia
12
Ocena
3
P
PrintablesChewey

Prusa i3 MK3S+ concave textured triwing LCD Knob

This is a remix of the original triwing LCD knob that comes with the MK3S+. I like the textured surface on the original knob, but dislike the flatness of the pressing area. There are other concave remixes of the same knob, but they do not…

Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
173
Polubienia
28
Ocena
5
P
PrintablesDucatici

Caribou MK3S Meanwell RSP-350&320-24 80mm und 92mm Lüfter

Hallo ich wollte mein Meanwell Netzteil leiser haben aber trotzdem die Kühlleistung nicht verlieren. Da wollte ich gleich meinen Noctua NF-R8 benutzen so entschied ich mich für meinen Zaribo dieses Abdeeckung von…

Wydruk około 3,35 €–4,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
167
Polubienia
18
Ocena
4
P
Printablessaabotage900

"Chat Bubble": Minimalist Easy-Print Low-Profile Bearing Spool Holder for MK3S, MK3S+

This is a small profile, economical, strong, easy to print and assemble spool holder for the MK3S & MK3S+ with 608 bearings for smooth rolling. Each side has a retainer to prevent spools from jostling around, which also lends strength to…

Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu

Pobrania
167
Polubienia
52
Ocena
5
P
PrintablesFipsthedog

Z Rotation Indicator for 8mm Rod / Prusa MK3 MK3S+

I want to observe how much work the mesh bed leveling has to do and it is hard to observe. Originally I just sticked some tape on the Z-Axis, but for my new printer I wanted a more elegant solution. So I sketched this together. It is…

Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
166
Polubienia
13
Ocena
5
P
PrintablesBream

Full Size Dark Sabre to fit on Mk3s printbed

Based on the original Ruiz Brothers project files, I've modified the blade so that it can be printed in 3 sections, and can be bolted together as per the original design - no glue required for the blade. I've included a HiltSupport file…

Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
157
Polubienia
18
Ocena
0
P
PrintablesROSIO

3030 krycí lišty MK3S+ (covers)

Jedná se o vylepšení tohoto modelu: ExtrusionAl Covers for 3030 Po vytištění z PETG byla délka o 2-3mm kratší než je potřeba. Moje verze má odladěné délky - po vychladnutí jsou přesně jaké potřebujete. Je přiložen taky step soubor ze…

Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
156
Polubienia
23
Ocena
5
P
PrintablesDiego F2M

(INSIDE FRONT FEETS)SquashBall MK3s/MK3s+ Vibration Damper V3.0 (for toolbox version)

if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…

Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu

Pobrania
129
Polubienia
27
Ocena
5
P
PrintablesForker45

MK3S+ Vibration Isolation Feet

Update: included TPU feet from Elan As part of my Lack Enclosure Build for my new MK3S+, I wanted to isolate printer vibration from the table top and reduce noise. I designed my own feet which included outboard supports on the front of…

Wydruk około 3,73 €–4,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
125
Polubienia
53
Ocena
5

PC4-M8 remix for "MK3S+ MMU2S Precise Calibration Chimney"

See my comment in the original model to find more pictures =========================== See my other models to have a complete and very usefull chimney : M2 Insert :…

Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
123
Polubienia
13
Ocena
5
P
PrintablesMichaelQ

Original Prusa Enclosure - MK3S+ Display Cable Quick Release

Owners of the original Prusa enclosure and the Quick Release for the MK3S+ add-on have probably noticed that the LCD display has to be removed, and the cables unplugged every time the MK3S+ is removed from the enclosure. This little…

Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
113
Polubienia
56
Ocena
4,83
P
PrintablesLucky

Anti Vibration Squash Ball MK3s/MK3s+

Malgré une surélévation de l'imprimante qui ne gène en rien, il se fixe a la place des supports d'origine. J'ai utilisé du TPU pour la partie haute avec un remplissage a 30% et PLA 50% pour l'autre partie. Vous pouvez remplacer le PLA par…

Wydruk około 4,67 €–5,71 € nettoWstępna wycena jednego wariantu

Pobrania
105
Polubienia
18
Ocena
5
P
PrintablesUli H.

Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder

Beschreibung: Ich wollte eine Möglichkeit meine drei Stahlbleche (PEI, Satin, Pulver) in meinem Druckergehäuse aufbewahren. In meiner Prusa Stahlblechhalterung befindet sich Platz für drei Stahlbleche. Das Spaltmaß für die Aufnahme der…

Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu

Pobrania
99
Polubienia
11
Ocena
5
P
PrintablesGenius4Hire

Prusa i3 MK3s black PSU replacement frame brace with Raspberry Pi mount

I found the pi zero too underpowered, and also had the Lack enclosure, so I just smushed these together to add a raspberry 2/3 to my MK3. As a bonus I made a different lid to connect GPIO's if you are into that kind of thing. It's this:…

Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
96
Polubienia
16
Ocena
5
P
Printablesc22dragoon

Raspberry Pi Camera Mount for Mk3S+ Remix

Remix of the awesome Raspberry Cam v2 mount for MK3S(+). When printed for the MKS3+ the camera position was a too low. Thanks to @fuchsr for providing the step file, I was able to modify the mount a little to adjust the camera arm angle…

Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu

Pobrania
96
Polubienia
13
Ocena
5
P
PrintablesBM

Integrated Enclosure i3 MK3S (heat chamber)

Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…

Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
94
Polubienia
34
Ocena
0
P
PrintablesPaul C

HexaPod Toolkit Box for Mk3S+

PARAMETRIC - Hexagonal Toolbox IT UNROLLS Flat giving you access to all drawers and pods Useful for specialised toolkits or toting around your DND mini's STEP files included so you can add dividers to pods or specialise the pods to hold…

Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu

Pobrania
94
Polubienia
43
Ocena
0
P
PrintablesPFITS

Drybox for 2kg filament and Prusa MK3S+ Topmount

The Drybox is a remix and recreation of above models. It is build to fit directly on top of the Prusa MK3S+ Printer and has a shaft to hold the spool, so no need for any bearings and other tubes. To attach everything you will need this:…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
91
Polubienia
15
Ocena
0
P
PrintablesOurAngryBadger

Nozzle Cam for Prusa MK3s / Bear Exxa

I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another…

Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
86
Polubienia
50
Ocena
0
P
Printablesfiretech

No Chimney Mod for MK3S+ and MMU2S/MMU3 with 5mm Filament Indicator LED

I was gearing up for installing @Hedo3D's Filament Indicator mod when I learned about the No Chimney mod . While the MMU3 chimney has been working flawlessly, the chimney is a bit in the way when unscrewing the QSM-M5 fitting (which you…

Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
77
Polubienia
22
Ocena
0
P
PrintablesMarkus

Z-Axis Nozzle Holder for MK3S+/Revo6, with tags for MMU2S

After upgrading to the E3D Revo 6, there is a need to store all those nice new nozzles so that they can be switched out whenever needed. The foot of the Z-Axis make for a great spot to store nozzles when not in use. And while we are at…

Wydruk około 2,58 €–3,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
75
Polubienia
18
Ocena
0
P
PrintablesJerbear

Prusa MK3s face shields Print with auto-eject mode

I was thinking during the weekend how I can reduce the printer off time during the night for visors production. I didn't want to try stacking files ( too lazy to do the post treatment ^^) so I decided to modify the Gcode to create an auto…

Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
15
Ocena
0
P
PrintablesPointNemo

Skadis MK3S Steel Sheet Holder (Horizontal Version)

This is a horizontal version of Haymount's vertical holder.

Wydruk około 3,78 €–4,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
68
Polubienia
13
Ocena
0
P
PrintablesMykal451

MK3S+ Einsy Case w/OEM Look and Feel Expanded & Reversed

My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
58
Polubienia
15
Ocena
4
P
PrintableskG_psyko

Steel Sheet Holder for Prusa MK3S+ & Prusa MINI+

I was actually not satisfied with the previous steel sheet holders. Therefore, here is my version. It is a bit more solid and stable I had the idea when I looked at this:…

Wydruk około 20,11 €–24,58 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
11
Ocena
5
P
PrintablesWellu

Humidity and temperature sensor holder for Prusa i3 MK3S+

Holder for temperature and humidity sensor for your Prusa i3 MK3S+ and alike. Fits on top of left or right Z-axis. Printed using 0.2 mm layer height using black Prusament PETG but PLA and other materials should work just as well. With…

Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
53
Polubienia
6
Ocena
5
P
PrintablesRamingoDesign

Temp Tower MK3S+ MMU3 Nozzle 0.6

preset GCODE for 0.6 mmu3 on prusa i3mk3s+ PETG Prusament

Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
49
Polubienia
2
Ocena
0
P
PrintablesPat_S

Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)

Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…

Wydruk około 4,55 €–5,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
45
Polubienia
2
Ocena
0
P
PrintablesSkeletalPrints

Prusa i3 MK3 / MK3S Camera Mount Extended + Allen Key Holder

Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe

Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu

Pobrania
42
Polubienia
7
Ocena
5
P
Printables3d_einfach

Bambu Lab to MK3s Hotend Upgrade

📌 Zweck des Adapters Der Adapter ermöglicht die Montage eines Bambu Lab H2-Serie Hotends am Prusa MK3s , ohne irreversible Änderungen am Drucker vorzunehmen . Ein zentrales Konstruktionsziel ist die vollständige Beibehaltung aller…

Wydruk około 6,41 €–7,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
34
Polubienia
18
Ocena
1
P
PrintablesResin_Chopper

FS cover with filament dust cleaner chimney V2 for mk3s+

FS Cover for Mk3s+ whit filament dust cleaner That's the V2 of my fs cover + fil-dust cleaner modify to fit Mk3s+ The cover have a chimney with separate chamber for the sponge from the enter of the extruder to prenvet that some little…

Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
34
Polubienia
2
Ocena
5
P
Printablesscubam@xx

MK3S+ Chimney Cover LED-Mod for MMU2S or MMU3

I used a small white SMD LED that I had lying around and a 1k2 resistor. The resistor is soldered to the +5V pin and the LED with the cathode to the OUT pin. A small bridge with a piece of wire must then be soldered between the resistor…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
33
Polubienia
5
Ocena
0
P
Printablesmwilde

Einhausung für Prusa MK3S

Stückliste 3D Druckteile 4 Winkel Verbinder für die Tür 8 Eckverbinder für das Haus 1 Kabeldurchführung 2 Scharniere 8 Distanzhülsen Baumarkt Tischdecke transparent 0,2 mm 130 cm breit (Meterware) Länge 2 Meter Quadratstab 10x10x2000 mm…

Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
3
Ocena
0
P
Printablesakamaka

Cover for Side-Box Prusa i3 MK3S - Left-Right

Cover for Side-Box Prusa i3 MK3S - Left-Right. Colour .3mf included, as well as g-code. Nice addition to the side-box; https://www.prusaprinters.org/prints/110699-side-box-prusa-i3-mk3s-left-right. Note: I got a little colour bleeding…

Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu

Pobrania
32
Polubienia
7
Ocena
0
P
Printablespaul020559

Prusa Mk3s Twirly Knob

A twirly knob for the Prusa Mk3s 3D printer. Twirling the knob with a finger in the circular ring makes adjustments accurate and very fast… Printed in recycled PETG at 0.2 mm layer thickness with the speed cranked up to 150% (Settings →…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
29
Polubienia
5
Ocena
0
P
PrintablesJagesh

Raspberry Pi 4/4B Mount for GeeekPi Case on MK3/MK3S/MK3S+

Uses 2 M3x8mm screws to mount to the frame. Print instructions: -Brim recommended -No supports -0.2mm layer height You can buy the case here: Case + Power supply: https://amzn.to/4f2fVIn Case only: https://amzn.to/40lDUOb Have included a…

Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
5
Ocena
0

Steelsheet Holder Prusa MK3s+

This is a holder for the Steelsheets from the Prusa Printer

Wydruk około 5,48 €–6,69 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
5
Ocena
0
P
PrintablesWerner

Resonance Damper MK3S/ Anti Vibration Feet

My printer is on an old, wobbly table. The vibrations of the stepper motors were transmitted throughout the house before my small absorbers were placed underneath. These dampers redirect all vibrations into the upper wall of the…

Wydruk około 3,72 €–4,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
27
Polubienia
5
Ocena
0
P
Printables3DAdán

Pedro Racoon Extruder Prusa MK3s

Pedro Racoon Extruder Prusa MK3s Iman de 6x2mm

Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
7
Ocena
0
P
PrintablesLuis

Prusa i3 MK3S+ LCD Plate for Lack enclosure / Montageplatte für LCD Bildschirm Prusa i3 MK3S+ Gehäuse

I had the Idea of removing the LCD screen from inside of my enclosure and attaching it to the Lack table. So I designed this plate to hold it. You need four M3x18 screws, wich you can take from the spare parts of your Prusa Printer. The…

Wydruk około 2,92 €–3,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
25
Polubienia
4
Ocena
5
P
PrintablesHaggerty3D

Workbench Pegboard Black MK3S+ PSU Holder

I built and mounted a Lack enclosure on my workbench. Since I don't have an additional lack on which to mount the PSU, I created this simple bracket to mount it to the pegboard of my workbench. The pegboard is standard 1 inch hole…

Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesScott Gibb

Prusa I3Mk3s+ Raspberry Pi 4 Case

Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…

Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesZeroedByte

BLV MGN Cube Metal Kit MK3S Extruder Adapter Plate

This is an adapter plate to use the Prusa MK3S+ extruder with the BLV MGN Cube 's Metal Kit . For those who are wondering, the BLV MGN Cube is a CoreXY using MGN12 rails. This is a plate to allow mounting the Prusa extruder to this…

Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
4
Ocena
0
P
Printablesfuser

Mk3.5 LCD cover printed on MK3S+ without MMU

This is the same as @MalikDrako_2006414 files except the m3f file has been tweaked to print on a MK3S+. So if you are desperate to print on the MK3S+ use this otherwise use the original after upgrading to the MK3.5. I had a lot of…

Wydruk około 5,28 €–6,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
7
Ocena
0
P
PrintablesLudo B

Single Extruder - Dual Color. Mini spool holder hanging Prusa i3 MK3S+.

Ik vind het leuke spooltjes, hoe krijg ik die aan mijn Prusa i3 MK3S+ printer gehangen. Na redelijk wat tekenwerk paste het prefect. Om dat het zo klein is moet je wel heel voorzichtig zijn bij het plaatsen, de lipjes breken anders af. Er…

Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesMachal20vt.cz

Kryt senzoru filamentu.PRUSA i3 Mk3s

Kryt senzoru filamentu pro teflonovou trubičku

Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
18
Polubienia
1
Ocena
0
P
Printablesschim hansen

Filament Führung MK3s+

Filament Führung für Prusa MK3s+

Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
7
Ocena
0
P
PrintablesCHLimerick

Mk3s+ / Mk3.5 meanwell powersupply toolkit

Toolkit that sits on the top of the meanwell power supply that accommodate the Allen key set, needlenose plyers etc. Printed on smooth sheet, with supports. Only suitable for printers that have a meanwell LRS-350-24 power supply that is…

Wydruk około 4,44 €–5,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesROSIO

Tiskový plát - ochrana víko (cover) MK3S+

Ochrana tiskové plochy v době klidu.Složený ze 4 dílů. Lícovací kolíčky jsou z filamentu 1,75x9mm. Jinak slepeno vteřinovým lepidlem.

Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
13
Polubienia
1
Ocena
0
P
Printablesredtahr

Foot to support XTool M1 Lasercutter on top of the MK3S+ enclosure

print four put under laser cutter (if you're keeping yours ontop of your prusa enclosure like we are) job done

Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesPrusa Research

i3 MK3S Printable parts

All printable parts for your Original Prusa i3 MK3S. Note these are the parts for the older MK3S version, not the newer MK3S+! Some of the parts are not compatible! For MK3S+ parts, see the respective printable parts. Attention,…

Pobrania
24 322
Polubienia
610
Ocena
4,94
P
PrintablesPrusa Research

i3 MK3S to MK3S+ Upgrade Printable parts

All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…

Pobrania
23 135
Polubienia
614
Ocena
4,94
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ - SideBoxes for some Tools

A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…

Pobrania
12 802
Polubienia
1964
Ocena
4,91
P
PrintablesPrusa Research

i3 MK3 to MK3S+ Upgrade Printable parts

All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…

Pobrania
10 749
Polubienia
285
Ocena
4,85