262 modeli
The Creality Sonic Pad comes with 2 kickstand style feet to set it on a desk, but no other mounting solution. I have an abundance of GoPro parts, so I designed a mount which will retain the kickstand style functionality, but also give the…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
A BETTER VERSION NOW AVAILABLE !!!! LET'S GO CHECK WARINING → ALL BIKES ARE DIFFERENT, PRINT THE CALIBRATOR FIRST TO CHECK IF IT CAN FIT YOUR BIKE, IF IT DOESN'T FIT CONTACT ME TO SOLVE THE PROBLEM <3 → WARNING 3D-Printed Kickstand –…
The first Foldable kickstand for Steam Deck work in progress EDIT: Now with second version for steeper angle! (deutsche Beschreibung weiter unten) This is an easy-to-print foldable stand for the Steam Deck. The print is optimised for…
stand is modified to fit the hole in the steam deck case.
The Creality Sonic Pad comes with 2 kickstand style feet to set it on a desk, but no other mounting solution. I designed a mount which will retain the kickstand style functionality, but also give the ability to mount using the S1 Pro…
Nintendo Switch Kickstand / MicroSD cover (Improved)
If you need to park on dirt, you should retrieve one of these from under your seat and put your kick stand on this. It will keep your kickstand from sinking into the dirt and dumping your Harley. This is 20% bigger than my other models,…
My step father showed me a generic kickstand pad he wanted for his bike. He showed me some images on google and I told him it would be super easy as it was merely a circle with two walls to place kickstand between. We also had a planned…
Harley Davidson Kickstand Plate Keep your stand from sinking into soft ground or protect your mancave floor. I coloured it in Bambu studio. Inspired by a number of examples out there. PLA Pro .2 Layer height No supports If you like, like.…
The Gundam Kickstand was designed to print flat and quick, with friction assembly. Print a bunch of these in cool colors and share them with me! Might make a stand with led mounts if there is enough interest. I have included a kit card…
A simple card to throw down and put your kickstand on when parking on soft ground. Much cheaper than an a fancy bolt on. If you lose or forget it, you can just print another one. This one has a Honda logo.
Print in place adjustable kickstand for DeckMate system for Steam Deck. 2 versions: short - deigned to work with my double vertical DeckMate compatible “case” plate available here . long - designed to work better with standard mount point…
Keep this under the seat of your Indian. Next time you park on dirt, this could save you from dumping your bike. Print with plenty of infill, and switch filaments at the appropriate layer to get the nice logo infill.
A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…
A 3 part case for the 2.4 inch ESP32 CYD board with a built in kickstand that folds in flat. I use this with CYD-klipper on my Lemontron 3D printer. Requires 10mm M3 screw to secure the back on and add friction to the arm. Print in the…
Why? Storage bins and tool holders become 3000% more accessible when they have a subtle lean applied. The kickstand fits within the base of any gridfinity box and stays neatly tucked away until deployed. The kickstand gives a '1x' box a…
Bike Kickstand (Fahrradständer), designed for my daughters new bike. Improved version of the Bike Kickstand for more stability 8mm joint instead of just 6mm Inner joint and leg merged into 1 part Stylish leg Easy to print and assemble,…
A kickstand that replaces the OEM clip for the pager so that it sits nicely on a desk at a ~45deg angle Modeled using the available references models: https://www.printables.com/model/1487918-hak5-pineapple-pager-reference-model
Kickstand for DeckMate system with adjustable angle and spring loaded locking mechanism. Long and short version. Short version deigned to work with my double vertical DeckMate compatible “case” plate available here . Long version should…
Replacement Kickstand for Samsung Z-Fold 4 stand case. both edges rounded (vs original with only one rounded) because the cornered edge promotes the clip to fold closed.
Instruction Print all the parts bottom, center hinge, and top plate (there are multiple options for top plate check before printing) Remove the supports and clean the parts you might need to drill the holes using a 2 mm drill Use a marker…
This is a kickstand to fit a Spigen phone case for a Samsung S21FE. I am not sure if there are other models it will fit. I don't believe the kickstand is compatible between all the Spigen cases. I have included a fully parametric Fusion…
What is it? It's a print-in-place tablet kickstand for landscape mode you can stick onto the back of a roughly 8-inch tablet (like the Fire HD 8 I sized it for) with VHB tape or some such. As it prints, you can add 6 5x1mm neodymium…
Remix of "Q8Khajah"'s logitech keyboard stand. I reused the rubber feet from the broken stock logitech keyboard stands and just reattached them to the ones I printed. I used krazy glue to secure the feet more permanently to the printed…
works great on my iphone 14 pro spigen case, and might work on others too, most likely cases made around the same time. print on highest quality, normal supports, and it's recommended to use adhesion. it is not recommended to eat the…
Kickstand pad to prevent your kickstand from sinking in to asphalt or soft surfaces. Large and flat to accommodate almost any kickstand. Thin and easy to store. 75% + infill recommended. Pictured pad is printed at 80% infill, ABS…
I liked 3D_Flow's bike stand, but wanted something simpler. Something easy to print and I don't need (or want) to take it with me anywhere (no bike attachment). I just want it for parking my bike at home. I ended up just re-creating it in…
NOTE This lid stand was designed for use with the MINIMAL ENCLOSURE by Design8Studio Welcome, welcome! I originally was using one of those hinged kick stands that screws under the lid handle, but I wasn't a fan of how it felt and it would…
The Begode Master kickstand is a little unstable with the stock pads. This will give you a larger surface area for more stability and a place to lift up the wheel.
A replacement component for the universal kickstand to replace the original kickstand on the ModCase. Mounting a hard drive is just one option; the hard drive or other accessories can be fixed using 3M VHB tape or Magsafe Magnetic rings.…
After cycling through what felt like every iPad mini case on the market, I finally decided to take matters into my own hands—quite literally—and design and print my own. The quest became even trickier once I picked up the Pencil, as many…
Here the now long overdue stand alone kickstand that was firstly introduced with the 18650 Powerpack back in April. Even so it was requested back then I totally forgot about it and was reminded just yesterday so I quickly added it to the…
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism_282287/models Want a stronger/more official solution? We also offer…
This is a replacement kickstand for the VTech baby monitor (VM919HD). It may fit other vtech 7"monitor displays but it has not been tested.
Inspired by Fabernex's "Kickstand for Samsung Galaxy Tab S9 Ultra", I completely remade it for the Samsung Galaxy Tab S9 FE. You'll need to print of the both the right and left hinge and the kickstand. If the kickstand can't fit on your…
KICKSTAND!!! This phone kickstand that can be attached on the phone back or case. Printed in 2 parts and filament wire used as hinge that can be repaired easily if broken. 3 parts in total, no supports!!! Assembly To attach the leg to…
Bike Kickstand (Fahrradständer), designed for my sons Bulls bike. Based on Bike Kickstand V2, modified for rear mount. Easy to print and assemble, just 4parts: Outer joint (print flat side down without support and >50% infill) Leg (with…
Beta motorcycles come with a kickstand that is WAY too short. This extension makes the bike stand up better. Best printed with LOTS of walls and 50% infill or more. An abrasion and impact resistant filament like Ninjatek's Armadillo TPU…
Priline TPU .20mm Strength Profile 6 shells, 6 bottom / top layers Gyroid Infill, 25%
I didn't want to pay $50+ for a kickstand so I designed this one instead. Requires three screws, two O-rings, and two thread inserts. Heat up the thread inserts and press them into the holes on the ends of the mount piece. Push screws…
This is set up as a PLA print but you can change that as needed. Walls-6 Infill-50% also has a modifier to make the stars, Emblem and lettering at 100% infill
It is a merged STL of Deck_Mate_Mechanism_Bot_Print and Deck_Mate_Kickstand_Bottom. Prints OK with “Support on build plate only” and the flat face down.
Replacement kickstand for keyboard, that fits with standard keyboards. Printing time: ~35 minutes (one piece)
Hey y'all. I designed this trippy little acoustic phone amplifier so you can jam out all summer long even if you don't have a bluetooth speaker. It prints in place with no assembly required. Hinged kickstand allows you to rock the amp…
This is a parametric case for the WaveShare 13.3"E e-ink Spectra panel. The STL files have case depths of 6mm (pictured), 8mm, 10mm, 16mm and 24mm. I've also included options for both vertical and horizontal printing. Do not use any…
This is a parametric case for the WaveShare 7.3"E e-ink Spectra panel. The STL files have case depths of 6mm (pictured), 8mm, 10mm, 16mm and 24mm. I've also included options for both vertical and horizontal printing. Do not use any…
I was in need of an iPhone case with stand, but i haven't found one here on thingiverse, so i decided to design one. ;) Many prototypes has been trashed until the final product, but now it's done. I added the*.123dx-files into the…
Background I really loved the Microsoft Surface Pro kickstand , with it's variable angle and low profile. When I got a Galaxy Tab S9 ultra, I was disappointed to see there wasn't an affordable option - Samsung's own Book Cover Keyboard…
I am unsure what case this is exactly since I made this for a friend.
My daughters bike constantly fell over when in kickstand mode. The kickstand was a little bit too low for the bike to stand firmly so I designed a higher foot for a firmer stand of the bike. And (at leas for my daughters bike) to my…
Printed successfully! Tolerances are ok, M5 screws work without cutting threats. Added initials as a speziell touch. Hardware used: 1x M5 15mm flathead screw 1x M5 Washer 1x M5 selflocking nut 2x M5 Hexscrews aprox. 15mm 2x M5x15 Hexnut…
Note: this tends to nibble on your cable a bit when you install it! I suggest printing in vase mode, with the small hole to the bed. This makes it easier to feed the wire through the spiral inlet, then you can easily slide it up the cable…
This is kickstand mount for Nami Burn-E if you change suspension from 165 mm -> 150/155 mm. You need: 1) Woom 1+-3 kickstand for kids bike for 150mm, Woom 2-3 kickstand for 155mm 2) M5 inner threads 3) M5 screws
After upgrading my loved iPad mini to a iPad Pro M4 I found myself looking for new cases again. I did not look for a long time as I did not find anything even closely acceptable. So I started again designing my own case. More adapting…
so there was a backplate but without the kickstand
This is similar to my slim case but thicker, 2mm, and a kickstand
This kickstand card holder combo for the Steam Deck allows you to have a low-profile storage for 4 micro-SD cards and enables the Steam Deck to stay standing up on its own using a print in place kickstand. This kickstand card holder is…
Does not work for the 15/15 Pro, but works for the max and should work for the plus Updated 9/28/2023 Ultra slim holder versions were added for ABS tolerances ( Untested ) Updated 9/27/2023 There are new versions of the models with…
When your kickstand feet are worn down to the bare metal of the kickstand, the time has come to replace them. Print two of these, replace them with the old ones, and you are ready to haul more cargo and/or kids on your beloved Bullitt…
A pocketable holder for the Apple Magsafe charger (not tested with non-Apple Magsafe) with a little kickstand. This is a little minimalist kickstand holder for the Apple magsafe charger. It will prop your phone up horizontally on a…
The stock kickstand on the Begode Extreme isn't quite tall enough which means the metal mudguard hits the ground when you put the EUC on the stand. This is a simple spacer to add a bit of thickness which keeps the mudguard from touching…
The kickstand foot extends the length of the kickstand arm a bit and makes the bike stand more upright and securely. It also helps to spread the force on the ground so it does not sink into soft soil or grass as easily. It is slanted at…
If you want to get the infill pattern showing, use 0 for the top and bottom layers and use the mount-modifier file as a modifier to apply 100% infill.
Kickstand Attachement for the Samsung Z Fold 4 Standing Case, you will need a separate kickstand that can fit in the slot, the one I used is "Kinizuxi " brand from Amazon and has the following dimensions: 15mm 63.5mm 4.35mm Can be either…
Simple addition of a handle that is also hopefully aesthetically pleasing.
🇬🇧 English version JSAUX Steam Deck Case – Kickstand Module (by SkTx) A custom modular kickstand design, made specifically for the JSAUX case for Steam Deck. This model is intended as a replacement for the original JSAUX kickstand…
This is remix of “Side stand Adapter for Woom 1 Kid Bike”. This supports M6 nut which is in sell now instead of M5.
I printed the adapter with 100% infill with ABS. The holes are slightly smaller than 6mm and need to be redrilled a bit. I glued a protective film to the frame and foam rubber to the inside of the adapter. I secured the screw connection…
The Kickstand will securely support your Mk2 when placed on its side in order to clear a jam to the Y-axis or when upgrading from the Mk 2/2s to the Mk 2.5. Handy to have when a print fails and you've got a "birdnest' of filament to deal…
I don't recommend this as upgrade part if old one is still in intact as stock one is in my opinion really good. Unless your planning to add upgrades to this model, like led lights or mount to theft alarm. In my case I broke it so I…
It broke, so I printed a new one. Printed at 0.15 mm layer height (Pretty much anything works) I don't think there is another soul with this exact keyboard and a 3D printer but if you do, hey, glad to be of help.
I printed from TPU(recommended) or PET-G 0.4mm nozzle 0.2mm layer, 3 walls, infill 40% (cubic adaptive) On one side stick velcro and mount your licence plate or banner… 🙃 Buy me a coffee: https://ko-fi.com/jokereuc
I scanned my own kickstand with professional machine (HEXAGON Absolute Arm 85), if someboy needs it… Print from TPU(recommended) or PET-G 0.4mm nozzle 0.2mm layer, 3 walls, infill 50%+ (cubic adaptive) I dont print it yet. If somebody…
Foot for bike kickstand. Bore diameter 9,5mm (works with 9,5 diameter of kickstand rod), bore length: 35mm. Additional locking mechanism. Best printed from TPU. I've printed it from 35 in Shore scale in it is good. 50% of infill, 3…
This is my upgraded stand for the JSAUX ModCase, designed primarily to solve the problem of the original kickstand becoming loose over time. It features a mechanical locking mechanism with a spring, providing a distinct, tactile "click"…
This slides onto the magnetic kickstand for the Dbrand Project Killswitch case. It might work on their future non-magnetic kickstand, since it seems likely that they will keep the same sort of shape. It slides on securely, and doesn't…
I've installed a 125mm shock absorbers and original kickstand became useless because of increased clearance. Warning! It's pretty fragile, consider another solution. Some examples here: https://electro.club/m/183820 My own suggestion:…
Kickstand designed to be stuck to the back of the Steam Deck using strong double-sided tape (acrylic foam type tapes recommended). Offers 3 angles: nearly vertical ~25° ~50° When installed the case included with Steam Deck will still…
Easy usage : A motorcycle kick stand pad for your motorcycle - beter safe than sorry when no stable parking spot could be found (dirt, gravel, … ) Claim your spot at the bar and Park your beer on the coaster. This remix was born because I…
I recommend at least 5 walls and 5 bottom/top layers, as this is a structural part. I used 0.25mm layer height and 0.4mm line width. This file was originally uploaded to my Cults3D page.
I tried some of the other kickstands on here and they wouldn't fit my case (too wide) so I made another one (The case is a Tough armour) The normal version clicks into place nicely, the short version stays in with just friction(mosty) I…
Sherman Kickstand and filler plates. !!! WILL NOT FIT MAX OR NEWER!!! This only fits the original Sherman. Clean your bed or use wide painters tape for visual texture - The print bed side is the side that you see! Use double sided tape in…
Replacement blocks for the kickstand on the Urban Arrow cargo bike. Print them with plenty of wall loops at the bottom to make them last longer before wearing out. And use support. ------ Blokjes te vervanging van de standaard blokjes op…
Cover with kickstand for Samsung Galaxy S22 Ultra phones. Includes 3 different backs to choose from. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Post-Printing Category: Mobile Phone
This isn't quite a remix, but this is a kickstand specifically for use with this fairing replacement kit. It utilizes the geometry of the fairings and the included m4 attachment points. I used 2x 8mm m4 threaded inserts in the rod, 2x…
A simple motorcycle kickstand plate for use in grass or hot pavement. Printed using PETg for high temps. This model has water drain holes and a loop for a string if you have issues bending over to pick up the plate once the bike is up.…
Taking @fabernex_542538 designs and @BargainBin_1518988 re-design, I modified the newest @fabernex_542538 model (v2) to fit the magnet placement of Samsung Galaxy Tab S9 FE model and 10x2 round magnets. Should work also for Tab S9, S10 FE…
Retro Clock (Cheap Yellow Display with Speaker and PiP Kickstand) [English] What started as a simple ESP32 CYD touchscreen clock project slowly grew into something bigger. I wanted a desk clock that actually earns its spot on the desk, so…
This replaces the little red tab that is used to pull the kickstand out. Mine broke after a year of use. So designed a replacement. BE WARNED!! The old one is glued in very well. You will need a little heat and small screwdriver for…
Stand plate to prevent your stand from sinking on soft asphalt or loose surfaces.
A kickstand pad that you can throw in your backpack, just in case you need to park somewhere that isn't paved. Swap filament at the appropriate layer for color infill text and logo. Thanks.
D20 Motorcycle Kickstand Puck. Meant to prevent your kickstand from from sinking into blacktop during the hot summer months. Printed PLA - Tested in Florida for July & August Gyroid Infill 60% infill Iron top surfaces 4 walls
Allow you to mount this motorcycle kickstand* to the Fiido Q1/Q1S when using an aftermarket motor extension. Likely does not fit the stock area, but feel free to remix and experiment. We'll see how it holds up; I used PETG with 6 walls…
I downloaded a couple I found online. They were all too big. I tried scaling them but it became clear that the plastic post requirement of 1mm was not going to be strong or render well. Then I realized that maybe this model was different.…
Printed in PETG on 70% infill It requires: 6x M4x8,5 Threaded insert 6x M4x10 INOX screw
This is replacement kickstand for Sony Vaio VGN-UX series of UMPCs. It fits in the slots for original kickstand and designed to be flush with the housing so you could put the UMPC down. Also it does not interfere with airflow. Whole thing…
![ZK-4KX (XK-4KX) Buck Boost Converter case / enclosure [with kickstand]](https://media.printables.com/media/prints/1206781/images/9063784_e70ddd2d-ac79-4964-b421-66d14797163d_021b12bd-20d7-4a8e-b4c6-feda49e16809/pxl_20250225_104810433.jpg)
