Wyniki wyszukiwania: lider

Sortowanie

1990 modeli

P
Printablesrobotfriend

Ultralight 2gram Glider (print in place)

If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…

Pobrania
52 219
Polubienia
8823
Ocena
4,59
P
Printablesrobotfriend

F23 ultralight glider Print in Place

A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…

Pobrania
4984
Polubienia
574
Ocena
4,8
P
PrintablesDuct Tape Magic

Meadowlark Performance Glider: 51m Range

The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…

Pobrania
4766
Polubienia
725
Ocena
4,9
P
PrintablesGarage Maker

A remix of the Zipper Slider Jig with clamping improvement

I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back

Pobrania
4365
Polubienia
279
Ocena
4,71
P
PrintablesLanzDesign

VasePlane - Vase Mode Glider

V2: Version 2 is now available! The pinch grip has been removed and replaced with a hook to launch the glider with a rubber band. A rubber band holder/handle is also included. (Gif of V2 flying has been added at the bottom of this post!)…

Pobrania
3849
Polubienia
436
Ocena
4,89
P
Printablesc-arts-modelle

Lukisegler-NG XS 3d-printed mini RC-glider

Lukisegler-NG XS Span: approx. 900 mm Body length: approx. 500 mm Take-off weight (LW-PLA): approx. 100 g Controls: elevator / aileron Center of gravity: 7 mm behind the profile nose (next to the fuselage) Rudder deflections: aileron…

Pobrania
2678
Polubienia
595
Ocena
5
P
PrintablesNotatiation

Print-in-Place Slider Fidget (13 minute print)

A Small Print in Place Slider Fidget, which takes only 13 Minutes to print. If it doesent work right off the Plate, put some force into sliding it and it should come loose. No AI was used in the making of this model.

Pobrania
2255
Polubienia
124
Ocena
4,2
P
PrintablesBP3D

TERROR-DACTYL Glider with Fossil Launcher (Airplane)

This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…

Pobrania
2244
Polubienia
249
Ocena
5
P
Printablesfifindr

Mini Plane Glider

The first two layers use variable layer height to keep the wing thickness at only 0.2 mm while still maintaining better strength using two printed layers. A lightweight miniature glider plane designed for simple hand launching and smooth…

Pobrania
1834
Polubienia
176
Ocena
3,6
P
PrintablesDieHard

Airbus A380 slingshot glider (Only need one elastic band!)

Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…

Pobrania
1329
Polubienia
210
Ocena
4,5
P
PrintablesZenlayne

Tiny soap glider

Hey ! This is a fun project I really wanted to share with you because I had lots of fun with it ! The concept As you can see, the concept is simple, it is juste a tiny 3d printed glider with the wings made out of "soap bubble liquid"!…

Pobrania
1097
Polubienia
337
Ocena
4,55
P
PrintablesSeppoTheFish

Paper plane glider, PLA based

Printing instructions: Add some extra veritcal shells to increase durabilitie of the wings Remove “Elephant foot compensation” to make the connection link at the tail wing work. Let the model cool down after printing. Removing it while it…

Pobrania
911
Polubienia
116
Ocena
4,71
P
PrintablesLoogle

Sling Wing - Folding Wing Slingshot Glider

Intro I love flying wing gliders, but they're very difficult to launch by hand with any significant flight time due to instability at high speeds and typically large aspect ratio. I came across expired US Patent 4836817 for a folding wing…

Pobrania
904
Polubienia
209
Ocena
5
P
Printableskaje

Slider Sign - On/Off, In/Out, Yes/No

Note [July 6, 2023] : A blank version of this is now available at the link below. Add your own text using PrusaSlicer 2.6 (or later). https://www.printables.com/model/521230-slider-sign-blank Use this sign to to show binary options.…

Pobrania
901
Polubienia
85
Ocena
4,83
P
PrintablesMLS

Zipper Slider Replacement / Reißverschluss Ersatzschieber

Hier habe ich 2 Varianten für Plastik-Spiralreißverschlüsse konstruiert; zum Einen die Variante PC5 für 6mm sowie die Variante PC7 für 7mm breite Reißverschlüsse. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt…

Pobrania
701
Polubienia
75
Ocena
4
P
Printablesc-arts-modelle

Lukisegler 2.0 (electrical RC glider)

Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…

Pobrania
658
Polubienia
114
Ocena
5
P
PrintablesMichaelQ

Original Prusa Enclosure - Slider Lock Latch

When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…

Pobrania
656
Polubienia
228
Ocena
4,98
P
PrintablesDieHard

Airbus A320 slingshot glider (Only need 1 elastic band!)

Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…

Pobrania
653
Polubienia
129
Ocena
3
P
PrintablesTBII78

Pringles Chip Slider Tray Sealable

Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill

Pobrania
576
Polubienia
27
Ocena
5
P
PrintablesMLS

Zipper Slider Replacement for Wellensteyn and other #8 two-way-Zippers - Reißverschluss Ersatzschieber für Wellensteyn und andere 2-Wege Reißverschlüsse 8mm

Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…

Pobrania
396
Polubienia
40
Ocena
4,67
P
PrintablesPat

Flat Flying Wing glider

This is the first model which I have uploaded, so please let me know if there is any issue with the file. Print Settings: Infill: 100% Seam Position: random Perimeters: 3 This is a quick experiment to make a glider that could be taken…

Pobrania
390
Polubienia
38
Ocena
5
P
Printablestur_bo_des_ign

Opel Corsa D - Lüftungsdüse Schieber Adapter - Air Vent Slider Adapter - Fan Grill Slider Adapter

Opel Corsa D - Lüftungsdüse Schieber Adapter - Air Vent Slider Adapter - Fan Grill Slider Adapter

Pobrania
375
Polubienia
16
Ocena
5
P
PrintablesMLS

Zipper Slider for #5 two-way-Zippers - Reißverschluss Schieber für 2-Wege Reißverschlüsse 5mm

Hier habe ich Slider u.a. für 2-Wege-Plastikreißverschlüsse 5mm konstruiert. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten eingehakt und dann vorsichtig nach unten gedrückt -…

Pobrania
360
Polubienia
39
Ocena
4,67
P
Printablesc-arts-modelle

Lukisegler (electric RC glider) update

Lukisegler update (english) Update of the wing-parts 10 (l/r) and 12 (l/r) from version 2 (v02) to version 3 (v03). The perforation for the servo-cables are now included in the printed part. It is no longer necessary to cut the holes by…

Pobrania
346
Polubienia
59
Ocena
5
P
Printablesc-arts-modelle

Lukisegler 3.0 (electrical RC glider)

The Lukisegler 3.0 – Improved Fuselage Concept The Lukisegler version 3.0 is based on an improved fuselage construction concept. The 3D-printed parts are made from LW-PLA and printed with infill for a lightweight yet durable structure. It…

Pobrania
337
Polubienia
46
Ocena
5
P
PrintablesT. Jansen

Print in Place Glider

Print Instructions Supports or ballast are not required. It is beneficial to have the perfect first layer function of the Prusa MK3.9(S), MK4(S), Core One, or XL. The following settings in PrusaSlicer are recommended: Printer Hardware…

Pobrania
324
Polubienia
14
Ocena
4
P
PrintablesMartin B

Onewing Glider

You can choose from two versions of the wings (with or without internal supports). The body is the same for both. You need: rubber band skewers a lot of glue Recommended printer settings: Wings without internal supports: Brim 0,2mm…

Pobrania
264
Polubienia
62
Ocena
5
P
Printablesc-arts-modelle

Lukisegler-NG XS e mini RC-glider (Update to brushless electric drive)

Lukisegler-NG XS e, Update to brushless electric drive Wingspan: approx. 900 mm Fuselage length: approx. 500 mm Take-off weight (LW-PLA): approx. 120 g Controls: elevator / aileron / motor Center of gravity: 8 mm behind the profile nose…

Pobrania
240
Polubienia
42
Ocena
0
P
PrintablesSebastian

Motorized Camera Slider with WiFi (DSLR time-lapse)

The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…

Pobrania
238
Polubienia
333
Ocena
5
P
PrintablesDizzelowski

Door Slider SPACEMAKER A67 X6 replacement

Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…

Pobrania
229
Polubienia
5
Ocena
0
P
Printablesniletaner

Flight Glider

This is the current beta version of my 3D printed glider. The airframe is lightweight, clean, and easy to assemble, designed for quick prototyping and iterative testing. ⚠ Beta Status The glider flies, but the center of mass is currently…

Pobrania
222
Polubienia
15
Ocena
3
P
PrintablesIan Black

YETI COOLER SLIDER FOOT

Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…

Pobrania
205
Polubienia
24
Ocena
5
P
PrintablesSamuel Panák

Avatar Aangs Glider

Model of glider which Aang used in the series Avatar: The Last Airbender . File .3mf is set with ironing of all upper layers too with a first layer.

Pobrania
201
Polubienia
61
Ocena
0
P
PrintablesSquishinStix

Ascent 18 IR60 Hinged/Magnetic Body Mounts and Sliders

These body mounts allow you to mount the Injora IR60 body on the Redcat Ascent 18 truck. The body hinges on the rear about 120°, allowing it to stay open by itself and have full access to the internals. The front magnetic latch uses two…

Pobrania
187
Polubienia
15
Ocena
5
P
PrintablesJoeVispi

Lee Primer Slider Six Pack Pro 6000

Printed with Sunlu PLA+ Infill 100% Prusa MK4S After breaking the original I modeled a replacement parts with the same sizes. Lee Precision SKU: BP5572F Reinforced the ring where the spring is hold. Fits as it is, no need to resize. Note:…

Pobrania
179
Polubienia
7
Ocena
5
P
PrintablesAviral

Swift S-1 Aerobatic Glider

This is a 3D model of the Swift S-1 Aerobatic Glider . It has a smooth body, long wings, and a clean tail design just like a real glider. I made this model in Onshape using basic tools like loft and fillet to give it a nice curved shape.…

Pobrania
125
Polubienia
11
Ocena
0
P
Printablesjamesharding

Beyerdynamic T90 T70 1990 1770 Pro Slider

A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.

Pobrania
109
Polubienia
4
Ocena
5
P
PrintablesJoerg_H

Furniture pads/gliders

Some simple pads or “gliders” for mounting under the legs of chairs and other kinds of furniture . Once installed, these pads/gliders: make moving chairs, tables and sofas a breeze, protect sensitive floors from scratches by your…

Pobrania
93
Polubienia
27
Ocena
5
P
Printablescranialvault

Yeti Mag Slider - Captive Magnet

The STL is 0.75mm too slim, but the gcode and Prusa project have the correct dimensions. Place the magnet on the lid and make sure it isn't repelled Mark the top When the printer pauses, insert the magnet with the marked side facing up…

Pobrania
88
Polubienia
11
Ocena
0
P
PrintablesMojoRuns

Quick Print Furniture sliders for felt pads

TITLE: Quick print screw mount furniture sliders by jboly DESCRIPTION: Easy / Quick printable furniture sliders for cheap felt pads. A 48pack of pads can be purchased on Amazon for around 6 USD. https://amzn.to/3CLXmoD These pads protect…

Pobrania
86
Polubienia
18
Ocena
5
P
Printablesch3D

Schieber Sommer/Winter Stihl 024/026 / Slider summer/winter Stihl 024/026

Deutsch Ersatzteil 1121 084 4100 Schieber Sommer/Winter Stihl 024/026 Gedruckt in: PETG Schichthohe: 0,15mm Düsen-Ø: 0,4mm Infill: 100% Update: gcode mit ASA hinzugefüht English Spare part 1121 084 4100 Slider summer/winter Stihl 024/026…

Pobrania
62
Polubienia
4
Ocena
0
P
PrintablesJadozub

M6 Nylon Bolt Screwdriver for RC Aircraft and Gliders

A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…

Pobrania
45
Polubienia
4
Ocena
0
P
PrintablesDušan Saiko

Fridge door slider - pojezd (unašeč) dveří vestavěné lednice

No supports needed. Screw holes must be manually enlarged on one side of the long piece, to absorb the screw heads.

Pobrania
39
Polubienia
1
Ocena
0
P
PrintablesFixes_Teeth

Dodge Ram AC Temperature Control Slider Knob

Modeled after the original AC temperature control slider knob on a 1990 First Gen Dodge Ram Cummins Turbo Diesel D250. Very similar in size and shape to the original. I couldn't find anywhere to buy a replacement knob as this is…

Pobrania
37
Polubienia
8
Ocena
5
P
PrintablesTperroneDesign

Estes Solo Rocket Stand & Replacement Glider Ring

This is a stand for the Estes Solo model rocket. Since the rocket has asymmetrical fins it doesn't stand on its own. Just flip the glider upside down and rest the rocket on the stand. Also included is a replacement glider ring STL if you…

Pobrania
28
Polubienia
9
Ocena
0
P
PrintablesJohn

Aesthetic front wheel slider KTM 1290 SDR

Aesthetic front wheel slider KTM 1290 SDR. Can be used with 2 m6x60 bolts and washers, or a m10 rod with washers and nuts. (See drawing) Print the Slider cap 2 times and use a color change if you like. Be aware that it's designed to look…

Pobrania
26
Polubienia
8
Ocena
0
P
Printablesjuri
Pobrania
25
Polubienia
3
Ocena
5
P
PrintablesHD_Creator

Glider pilots hygienic drinking valve cover

This thing provides a hygienic cover around your hydration bladder mouthpiece, which can be easily opened and closed with one hand and is especially useful for single pilots when flying gliders. It is held closed by two little magnets and…

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesSkeletalPrints

Toothpaste Slider v1

Goes on toothpaste tube togrt all of the toothpaste up to the top. Inside dimensions: 60mm X 1mm X 10mm

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesNewTeq

PrusaXL: Smaller telescopic spoolholder slider (for Das Filament and other Master spools)

Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesPeter Heinisch

Slider for washing machines

Slider for washing machines. Switch from Empty to full. Printing in two diffrent colors.

Pobrania
19
Polubienia
8
Ocena
0
P
PrintablesMatt

Tactical Buzz-Saw Haptic Magnet Slider Fidget System

I added holes of various sizes because everyone likes that You need 6 - 6 mm X 3 mm neodymium for each blade of awesome Enjoy this ultra engineered magnet slider fidget. Put a pause in your slicer and the right height or use the supplied…

Pobrania
7
Polubienia
1
Ocena
0
P
Printablesthe_21_HER0

last poop slider dog Lean@home

Der Last Poop-Slider ist ein manuelles Anzeigeelement zur schnellen und klaren Kommunikation im Alltag mit Hund. Durch einfaches Verschieben eines Markers lässt sich anzeigen, um wie viel Uhr der Hund zuletzt spazieren war. Besonders in…

Pobrania
6
Polubienia
4
Ocena
0
P
PrintablesMrJW

VW Sharan I 2003 seat rail guide spacers / slider

VW Sharan I front seats railing replacement spacers / sliders. Modeled them as close to the original as possible, however I found that they are a tad too loose. They work great, there is just a little more play, you may consider printing…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesPiotr

IKEA MUDDUS replacement slider

Hi! Because I had a 3 broken sliders, and the desk was unstable I decided to repair it my favorite way... let's 3Dp it! NO SUPPORTS NEEDED

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesJohn Doe

Simple Indoor Glider V2

This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament. Check out the Makerworld profile…

Pobrania
27 272
Polubienia
5133
Ocena
4,78
P
PrintablesJoão Hackbart

Stable Flyer VI - Small Toy Glider

NOTE: After reading this paper on the effect of Tail Dihedral on stability, and experimenting on my design, it seems that it is a great idea to angle the Horizontal Stabilizer into a negative dihedral (anhedral). Or in other words, for…

Pobrania
23 111
Polubienia
3864
Ocena
4,63
P
PrintablesRyan

Simple Lightweight Glider (20g)

Features: 10 by 10 inches (scale down in slicer for smaller sizes) Flies 35 to 50 feet 20 grams of PLA One part No supports needed! Usage: Pinch behind wings Adjustable flaps for optimal preformance Bend front wing flaps down and back…

Pobrania
14 111
Polubienia
1559
Ocena
4,07
P
PrintablesMisterJ

Zipper Slider Replacement - V3

Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…

Pobrania
13 783
Polubienia
6235
Ocena
4,95
P
PrintablesTom Stanton

Tissue Paper Glider

This plane is designed to be printed directly onto thin tissue paper (17gsm) to produce a lightweight glider. Printing tips: To hold the tissue paper to build plate, I used thin 2mm magnets (mine were 30x10x2mm, but they can be smaller).…

Pobrania
8206
Polubienia
2708
Ocena
4,83
P
Printables3D EVOLUTION
Pobrania
6203
Polubienia
1056
Ocena
4,35
P
PrintablesSouky1122

Super Glider - Easy to print

the final version of my glider model, which is very easy to print. all it takes is one print, a little editing, and it's ready to fly! Recommended print parameters: 3 walls 20% infil Material PET-G (can use PLA but PLA is brittle so there…

Pobrania
5585
Polubienia
628
Ocena
4,8
P
PrintablesCrazy_engineer!

Simple glider

This glider was printed on a Ender 3 V2 NEO with Creality PLA. The first two layers shall be printed slowly (50mm/s) to ensure layer adhesion. Settings 100% infill 0.2 mm layer height max speed 100 mm/s Post processing Use a hot air gun…

Pobrania
5374
Polubienia
661
Ocena
4,67
P
PrintablesMicah T

Fun Rubber Band Glider ≈4g

This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…

Pobrania
5192
Polubienia
880
Ocena
4,4
P
PrintablesJohn Doe

Giant Indoor Glider v4

Prints on the Bambu P1S in exactly 30 minutes with the provided 3mf file. Print in PLA with 100% infill. Be careful not to bend the wings while removing from the build plate. Once you take the glider off the build plate, flip it over(flat…

Pobrania
5142
Polubienia
618
Ocena
4,83
P

Chips Pringles Slider Chip Rutsche Big and Normal Deckel Xl Chip

Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards

Pobrania
4713
Polubienia
390
Ocena
4,57

Pringles Slider

Easy access to your pringles

Pobrania
4318
Polubienia
615
Ocena
4,9
P
PrintablesTomoDesigns

Slider Fidget

A satisfying slider that makes a noticeable clicking sound while you push it up and down! Note! You have to turn on supports because some parts need to be printed to perform optimally. Is the spring not good? Too soft or too hard? Try…

Pobrania
4212
Polubienia
611
Ocena
4,42

Glider - Toy Plane suitable for Prusa Mini

Printsettings: 0.2mm ~20% infill (still testing!) no support needed use PETG! PLA might be to bridle You need a rubber launcher! like this or this I'm currently trying to build a rubber toy glider, which can be printed in one piece…

Pobrania
4101
Polubienia
387
Ocena
4,72
P
PrintablesJoeRixon

Stable glider V7a + Notch for rubber band launch (50m+ range)

This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…

Pobrania
3317
Polubienia
365
Ocena
4,94
P
Printablesniletaner

The Glide | Minimalistic Functional Glider

This is the final iteration of my lightweight 3D printable glider, developed and optimized after beta phase. During the beta stage, I tested balance and tail geometry. Based on "flight trials", the rear section (tail assembly) has been…

Pobrania
2782
Polubienia
379
Ocena
4,5
P
PrintablesLoboCNC

AutoGyro Ring Glider

There are a couple of problems with most of the 3D printed flying rings: Firstly, it's difficult to get the right mass distribution with 3D printed plastic. Secondly, they are damnedably difficult to throw with the proper spin, and liable…

Pobrania
2702
Polubienia
703
Ocena
4,85
P
PrintablesMirco Göttsch

kitchen scale slider

These are mounts for a kitchen scale

Pobrania
2665
Polubienia
1437
Ocena
4,95
P
PrintablesSammysHP

Beyerdynamic DT 770/880/990 Slider Replacement

Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…

Pobrania
2648
Polubienia
134
Ocena
5
P
Printableschimera

Whetstone Knife Sharpener Slider

Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…

Pobrania
2524
Polubienia
414
Ocena
4,5
P
Printablessamscoolprints

glider perfect for summer

use 30% infil but also dont chuck the plane at the ground just give it light throw fold back wings up like in picture. also if you remix my model please honor the original creator. hope you guys like it

Pobrania
2512
Polubienia
353
Ocena
4,42
P
PrintablesLanzDesign

VasePlane V2 - Vase Mode Glider with Rubber Band Launch System

This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…

Pobrania
2410
Polubienia
336
Ocena
4,86
P
PrintablesAlex

one piece mini glider v1.1 easy print & fly

UPDATE 4: tests with kf airfoil wing very successful, can fly longer, faster and stable without fluttering UPDATE 3: test video of glider 1: https://youtube.com/shorts/DSoBWi8LOhU UPDATE 2: the first version's wing can be stiffened with…

Pobrania
2362
Polubienia
234
Ocena
4,67
P
Printablesc-arts-modelle

Lukisegler (electric RC glider)

CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…

Pobrania
2270
Polubienia
258
Ocena
5
P
PrintablesOcelotzlasu

Fidget Slider

I saw this fidget design on AliExpress and decided to make one that could be 3Dprinted. Besides magnets, it doesn't use any hardware. You'll need 11 neodymium magnets (12 for 5x1 version) to make it work, and I made 3 versions: 5x3mm…

Pobrania
2246
Polubienia
601
Ocena
5
P
PrintablesRod

Zipper Slider Jig

A jig to hold a zipper slide while threading bulk zipper tape through the slide. There are two options, with and without a weighted base. Fusion 360 file included for your convenience. Note: the weight cavity and weight filling hole…

Pobrania
2216
Polubienia
317
Ocena
4,92
P
PrintablesSevro

Swift - small bird glider

Overview : One of my favourite bird is common swift. The true kings of flying. It is the only species that spends most of its life in the air including eating, drinking, mating and even sleeping. They can spend up to 10 months in the air…

Pobrania
1930
Polubienia
304
Ocena
5
P
PrintablesjSamz12

Falcon Glider

UPDATE: I have made another glider that blows this one out of the water. It may take slightly longer to print but trust me it is worth it. Check it out yourself! Viper Glider (Impressive Sturdy Glider) by jSamz12 | Download free STL model…

Pobrania
1900
Polubienia
413
Ocena
3,5
P
PrintablesLoboCNC

Gooseneck Glider (Rubber Band Launch)

After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…

Pobrania
1764
Polubienia
174
Ocena
5
P
PrintablesVaughn Whitney

Glider & launcher (print in place)

This is a super fun toy, and the best part about is that it is print in place! Simply slide of rubber band onto the launcher, and have fun! The plane is designed so that with its thin wings, it can be manipulated to fly in any way. By…

Pobrania
1646
Polubienia
485
Ocena
0
P
PrintablesIan Foulds

Hoop Glider

This model has been superseded by my remix that improves the interference fit I suggest downloading the new version. https://www.printables.com/model/1736993-hoop-glider-redux-improved-interference-fit This is a ring wing glider also…

Pobrania
1607
Polubienia
351
Ocena
4,5
P
PrintablesJerrodbug

Pringles Slider US 5.5 oz.

Prints without support. I did use a brim, but i dont think its necessary.

Pobrania
1585
Polubienia
669
Ocena
5
P
PrintablesGuenther

Slider Knob Mod - OTF Fidget Knife

The OTF Fidget Knife is a great model but after using it for a while the slider knob starts to dig into your skin. I've replaced the knob with something more ergonomic and that lacks the sharp edges of the original.

Pobrania
1552
Polubienia
174
Ocena
4,87
P
PrintablesPCDC

Satisfying Slider Checklist - Customizable

Easy to print, customizable text via .STEP, Snap-fit assembly! Create your own Agenda for any occasion. No support required. To ensure smooth operation and that the sliders stay in place, add some Super Lube or grease under each slider.…

Pobrania
1495
Polubienia
766
Ocena
4,8
P
PrintablesGeoPrints13

Nightfury Glider

Glider modelled after the silhouette of a Nightfury dragon. I saw Sevro's dragon glider and I had to make my own. Printing Instructions : Print at 100% infill to ensure proper weight and with the 105% first layer extrusion width to ensure…

Pobrania
1477
Polubienia
133
Ocena
4,86
P
PrintablesLaisch

ASW20 Sailplane (micro glider - flyable)

This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA. Because of it's lightweight behaviour it's a little bit fiddly to get it together properly…

Pobrania
1399
Polubienia
151
Ocena
5
P
PrintablesjSamz12

Viper Glider (The Best Glider You'll Find!!)

This glider can very easily be launched by hand, just as a paper airplane would. It glides very well. There is also a stand for displaying your glider when not being used. I hope everyone enjoys this I have put many hours into it. If…

Pobrania
1393
Polubienia
186
Ocena
5
P
PrintablesMisterJ

Zipper slider replacement (reverse)

========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…

Pobrania
1375
Polubienia
583
Ocena
4,4
P
PrintablesJochem

Slider fader knob for Soundcraft, Yamaha, Behringer mixer

Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…

Pobrania
1333
Polubienia
150
Ocena
5
P
Printablesstuckpixel

WH-1000XM3 Replacement slider parts

NOTE: This is an imperfect solution - and I've since moved on and replaced my old XM3s. As such, I'm not able to improve this model any longer. Feel free to remix the model - I'm happy to share my source tinkercad model if you reach out…

Pobrania
1312
Polubienia
63
Ocena
3,5
P
Printablessamscoolprints

Glider plane made for fun

Print as a gift or toy for you fold the wings up for more action (sorry i could not get an image :D)

Pobrania
1308
Polubienia
199
Ocena
5
P
PrintablesDirac Arts

Rubber Band Powered Glider

I updated all files that were in giant dimensions and reduced the size of the wings a little to better frame Use 100% filling with some hard material and with thin layers, as this model has small and precise parts that fit together, after…

Pobrania
1302
Polubienia
136
Ocena
0
P
PrintablesJohn Doe

Mini Indoor Glider

Prints in 15 minutes on the Bambu P1P, 33 on the Ender 3 V2. Once printed, wait for the hotbed to cool down and gently remove with a scraper tool. Bend the elevator slightly upwards and bend the ends of the wings up. Hold the plane from…

Pobrania
1276
Polubienia
100
Ocena
4,5
P
PrintablesMartin

Death Glider from Stargate

This is my model of the Death Glider from the Stargate franchise. I made the model myself and printed it and painted it. The model has all the features seen in the show - foldable wings, retractable cockpit windows, retractable cockpit…

Pobrania
1265
Polubienia
270
Ocena
5
P
PrintablesBogomips

Stronger beyerdynamic headband slider

I love my headsets from beyerdynamic but sometimes I am really fed up with the prices of spare parts and how flimsy they are, I regularly change ear pads, cables, headbands and sliders. So I designed those from scratch to be tightened…

Pobrania
1245
Polubienia
53
Ocena
5