Wyniki wyszukiwania: magnet

Sortowanie

19 816 modeli

P
PrintablesPreischl 3D

D20 Dice Box magnetic

D20 Dice Box – Magnetic Hey maker! 👋 A practical and stylish D20 dice box with a secure magnetic lid. Features: Designed for 5×5 mm round magnets for a snug closure. Works with flatter magnets using a printed spacer. Secure transport and…

Wydruk około 5,02 €–6,14 € nettoWstępna wycena jednego wariantu

Pobrania
2636
Polubienia
1323
Ocena
4,91
P
Printablesstefanlitter

Gridfinity Base - Light Magnetic Connectable Parametric

Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
2074
Polubienia
311
Ocena
4,92
P
PrintablesDvG3DAtelier

Prusa Core One Buddy3D Camera Angle Mod – Better View, No Collision, Round Magnet Mount

I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…

Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1389
Polubienia
418
Ocena
4,99
P
PrintablesVlastimil

Anemometer with Hall sensor and magnet

I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…

Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1364
Polubienia
110
Ocena
5
P
PrintablesJeepingJohnny

Extruder Gyroscope, Print in place with press fit magnets.

I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…

Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu

Pobrania
1360
Polubienia
336
Ocena
4,97
P
Printablesaki3d.ca

AirPod Max Holder with Integrated Magnets

Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…

Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu

Pobrania
1259
Polubienia
165
Ocena
5
P
Printablesmatthew_

Magnetic Print Sheet Holder - Prusa CORE One

Prusa CORE One Print Sheet holder Simple magnetic print sheet holder for your Prusa CORE One. This model uses 6x3mm magnets commonly found in Voron projects. This model fits 3 Prusa print sheets. Check out the remixes for different magnet…

Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1216
Polubienia
302
Ocena
4,9
P
PrintablesRichard

Magnetic clip (curtains connector)

This magnetic clip is designed in Fusion360. The model in fotos is printed on my Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used support cubic infill but check my G-code for more info. No supports needed. I used magnet of…

Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu

Pobrania
1143
Polubienia
1051
Ocena
5
P
PrintablesMerganMcFergan

Pudgy Platypus Fridge Magnet

Print this Pudgy Platypus for a cute addition to any fridge magnet collection. It is a tiny, quick print, but needs a little support on the bill and feet. The magnet hole is cut for a 5/16” (7.83mm) super magnet. I’ve included the magnet…

Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu

Pobrania
1070
Polubienia
398
Ocena
4,83
P
PrintablesPhilippHee

Magnetic Whiteboard Pen Holder

Magnetic Whiteboard Pen Holder Magnetic holder for 4 whiteboard pens. The magnets used are 4 round/cylindrical neodymium magnets (20x3 mm). I use the following magnets: https://www.amazon.de/dp/B088FN6YN6 The magnets are inserted during…

Wydruk około 4,03 €–4,93 € nettoWstępna wycena jednego wariantu

Pobrania
1021
Polubienia
148
Ocena
4,89

Star Wars Imperial Stormtrooper Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu

Pobrania
929
Polubienia
202
Ocena
5
P
Printablesmichalgerhat

Magnetic PFTE coupler dock/terminator

I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…

Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
847
Polubienia
527
Ocena
4,76
P
PrintablesLandon Campbell

1x1 Short Vase Mode Gridfinity Bin With Magnets

I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…

Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
818
Polubienia
79
Ocena
4,67

Print-in-place Hinged Dice Vault (Magnetic)

Hinged Dice Vault With Magnets Parts List 10mm x 3mm neodymium disc magnets CA glue 7 piece dice set Instructions Print with 2 walls, 15% infill of your choice, and no supports. Insert a pause on the layer that the magnet holes are…

Wydruk około 7,25 €–8,86 € nettoWstępna wycena jednego wariantu

Pobrania
803
Polubienia
329
Ocena
4,86
P
Printables3DMAC

flexi elephant toy and magnet in the fridge children

Flexible elephant suitable as a decoration, a toy for children, or as a magnet for a refrigerator. Print instructions speed 0,2mm infil 20% filament PLA

Wydruk około 3,52 €–4,30 € nettoWstępna wycena jednego wariantu

Pobrania
782
Polubienia
114
Ocena
4,36
P
PrintablesMOSTAR

PTFE Tube Y-Splitter With Strong Magnets

Improved PTFE tube grip for more secured grip. Added two hidden very strong Prusa magnets for easy and quick mount. Changed to M3x8mm bolts without any inserts. To assemble and mount PTFE Tube Y-Splitter you will need the following*: M3x8…

Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
759
Polubienia
69
Ocena
4,54
P
PrintablesCobalt3D

Detailed F-35 Lighting II Fighter Jet Magnet

Magnet based on a F-35 Lighting II fighter jet. Detailed design. This model is designed to use 6mm x 3mm magnets. G-CODE has a layer pause at 3.8mm to add the magnets.

Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu

Pobrania
654
Polubienia
74
Ocena
5
P
Printablestuckovajana

Magnet Stranger Things (invisible magnet, no mmu)

Magnetka v designu známého seriálu. Vlastní výroby. Model s vloženým magnetem ("neviditelný magnet"). Vložení neodymového magnetu o průměru 1cm a výšce cca 2mm. (při změně velikosti se změní velikost magnetu. Barva: černá a červená Tisk.…

Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu

Pobrania
596
Polubienia
77
Ocena
5
P
PrintablesMilan

Steel Nail and Torx Screw Refrigerator Magnet

Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
548
Polubienia
302
Ocena
5
P
PrintablesDog Box

Penduelum - The Magnetic Board Game (BOARD 2.0!)

SAY HELLO TO BOARD 2.0!!! I'm very excited to introduce the Penduelum Board 2.0 as a thank you to all you kind folks for liking the model so much: PENDUELUM II: PENDUALUM! (super creative, hope it won't get confusing) Now modular, works…

Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu

Pobrania
533
Polubienia
842
Ocena
4,67

Star Wars Mandalorian Mythosaur Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 45° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu

Pobrania
529
Polubienia
98
Ocena
5
P
Printablesjoernreimerdes

Dice Box / Rolling Tray / phone stand (print-in-place hinges!) - magnet insets

I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print). The magnets require a bit of force to be inserted. I used a hard object to press one side into…

Wydruk około 8,97 €–10,97 € nettoWstępna wycena jednego wariantu

Pobrania
523
Polubienia
64
Ocena
4,33
P
Printablesneoyarus

Wowstick case with magnetic bit holders, parametric

Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…

Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
508
Polubienia
139
Ocena
4,88
P
PrintablesMiguel M.

Mandalorian Magnet

Just a 2D Mandalorian helmet. Slap any magnet you want on the back and VOILA!!! Included print file includes a color change. .stl also included Enjoy! And If you have a minute, check out my other models!…

Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu

Pobrania
487
Polubienia
130
Ocena
4,86

Wonder Woman Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu

Pobrania
484
Polubienia
72
Ocena
5

Transformers Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu

Pobrania
470
Polubienia
91
Ocena
4,86
P
PrintablesErik van de Pol

Minimal two-color extruder indicator, magnetic, no glue

There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…

Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
460
Polubienia
129
Ocena
4,75

Avengers Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu

Pobrania
455
Polubienia
98
Ocena
5
P
Printablestotalgeek9224

CR10/ Ender 3 Magnetic Bed Aligner

Got a CR10/Ender 3 with a Magnetic Steel sheet? Hate aligning it? Me too! This mod screws in above your springs/ spacers, and gives you the best alignment possible for your bed, similar to a Prusa. Can work in conjunction with TH3D Cr10…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
454
Polubienia
98
Ocena
4

Star Wars Death Star Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu

Pobrania
422
Polubienia
102
Ocena
5
P
Printablesxtiger

Parametric Magnetic Hinged Box

The "Parametric Magnetic Hinged Box" is a 3D model made with FreeCAD. Designed with different needs in mind, it offers a hinged lid and magnetic fasteners for a secure close. It's versatile and perfect for multiple uses, like lunch boxes,…

Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu

Pobrania
411
Polubienia
43
Ocena
5
P
Printablesishikawats

TARS Robot: Magnetic Joints

This is my model of TARS from the movie Interstellar. TARS body consist of 4 legs, this model uses magnets to form joints and keep everything together. The magnetic joints slides along the full leg length which makes for a very flexible…

Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu

Pobrania
395
Polubienia
136
Ocena
0
P
PrintablesSimple3D

Blink (4th Gen) Outdoor Security Camera Rubberized Magnetic Mount for Vans

I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…

Wydruk około 4,09 €–5,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
373
Polubienia
30
Ocena
5

Iron Man Helmet Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu

Pobrania
333
Polubienia
73
Ocena
5

Black Panther Magnet

Wakanda forever! You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the…

Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu

Pobrania
325
Polubienia
66
Ocena
5
P
PrintablesJohn

PRUSA XL Magnetic Purge trays

Purge trays for connecting with magnets to your XL build plate. Use the stop to put in the magnets. No need for support. I used a brim.

Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
315
Polubienia
79
Ocena
5
P
PrintablesMatt Boyer

Magnetic Calipers Holder / Ruler Holder

A small holder for your calipers that requires one 8x3mm magnet (glued in). The ruler holder requires two 8x3mm magnets (I also threw two 10x2mm magnets over the screw hole). I've included two ruler holders for two different widths. Both…

Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu

Pobrania
314
Polubienia
68
Ocena
4,9
P
PrintablesCobalt3D

Detailed F-22 Raptor Magnet

Magnet based on the F-22 Raptor. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.

Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu

Pobrania
305
Polubienia
34
Ocena
5
P
PrintablesBlue

Prusa Core One Webcam Mount for Logitech C920/C930 (for 6x2mm magnets)

Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…

Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
299
Polubienia
72
Ocena
5
P
Printablescjnaz

Magnet insertion tool for 3mm, 4mm, 5mm, 6mm diameter magnets

Designed for inserting 3mm, 4mm, 5mm, and 5mm diameter magnets into printed projects. Load a few magnets into the 10mm slot in the post in the desired orientation/polarity. These magnets hold the magnet on the tip in the desired polarity.…

Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
244
Polubienia
38
Ocena
5
P
PrintablesMartin

Rounded rectangle Hygrometer magnetic holder for Bambu Lab P1S

Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…

Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu

Pobrania
238
Polubienia
53
Ocena
5
P

Rotating Dishwasher Clean/Dirty/Washing Magnetic Sign

Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by…

Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu

Pobrania
233
Polubienia
33
Ocena
5
P
PrintablesDaedadix

Ammonite Fossil Magnet

The magnet-ready version is available as a 3MF file. The hole is modeled as a negative cylinder, allowing you to easily adjust its size to match your specific magnets

Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu

Pobrania
219
Polubienia
22
Ocena
0
P
PrintablesDorffMeister

Clean / Dirty Magnet for Dishwasher

This model is designed to use four 8mm x 3 mm magnets (I bought mine on Amazon). The magnets are concealed within Base, kept in place by Casing. The "Clean" / "Dirty" letters snap into place (or glue them). The tolerances are tight. If…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu

Pobrania
217
Polubienia
44
Ocena
5
P
Printablesmerakrom

Door knobs with magnet lock

Pair of door knobs with magnets holding the doors closed. The knob is attached with a M5 screw and a washer. Using a big washer and making the hole in the door slightly bigger than 5mm allows for adjustments if the hole is not exactly in…

Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
210
Polubienia
62
Ocena
5
P
PrintablesExceeder

Honeycomb HSW Hidden Magnet Mount for three 6mm x whatever magnets

Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…

Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
204
Polubienia
45
Ocena
5

Star Wars Galactic Republic Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Alternative top infill pattern: Archimedean Chords Low speed and high temperature will create a shiny top surface. There are "holes"…

Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu

Pobrania
202
Polubienia
38
Ocena
0

Star Wars Clone Trooper Phase 2 Dynamic Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu

Pobrania
202
Polubienia
60
Ocena
5
P
Printablespaho

Santa Claus 5 color Refrigerator Magnet for MMU

I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…

Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
200
Polubienia
17
Ocena
4,67
P
PrintablesPenguinNinja

Skadis Boards Linker - Tighter Fit Remix (Non-magnetic version)

This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole. The fit now is very tight. In addition to the original model where you could only position the links horizontally,…

Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu

Pobrania
196
Polubienia
27
Ocena
0
P
Printablesihavegerms

Remix Magnetic grille for Drop BMR1 Nearfield speakers Drop BMR1 - grille insert

Took the grille insert that @mbarvo made and turned it into two parts to make it easy to change the pattern of the grille to the infill select. You'll want to go to the original…

Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu

Pobrania
189
Polubienia
11
Ocena
0

Hitman Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu

Pobrania
181
Polubienia
29
Ocena
5
P
PrintablesPobi

magnet holder for IPSC belt

Designed in need to hold a magnet on an IPSC outer belt. It's used to hold full ammo magazines when used in IPSC shooting. It consists of 2 parts to hold on the belt as shown in pictures. To assemble you need 4 M4 nuts and M4x16 bolts. I…

Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
176
Polubienia
22
Ocena
5
P
PrintablesHanozius

Foldable CueHolder with magnetic Chalkholder

Ich habe hier einen Cuehalter für bis zu vier Cues, eine Cueverlängerung oder auch für den abgeschraubten Jumpcue Griff und eine Kreide. Zusätzlich gibt es noch eine gedruckte Hülle. Der Kreidenhalter ist eine kleine Schublade, die hinten…

Wydruk około 8,30 €–10,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
172
Polubienia
14
Ocena
0

Magnetic Flash Modifiers (Yongnuo YN685)

A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…

Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
171
Polubienia
41
Ocena
0

Bioshock Logo Magnet

Welcome to the Rapture! You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some…

Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu

Pobrania
171
Polubienia
49
Ocena
5
P

magnetic 1/4" hex bit tool / holder for all round magnets (parametric file included)

Summary Ultra-compact and magnetic bit holder for every application situation. The bit can be inserted easily and won't fall out. Given .3mf file accepts widely used 6x2mm round magnets. Accepts any other sized round magnet (up to 18mm…

Wydruk około 0,59 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
169
Polubienia
47
Ocena
0
P
PrintablesSTSUL.CZ

NBA plate for magnets or cakes

3D logo NBA, Bulls, Nets, Cobe 24, Durant 7, Irving 11, James 23, Jordan 23, basketball all in one or two or there colours, 3mf and gcode files are designed for PLA or PTEG, quality 0.3 or 0.2mm

Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu

Pobrania
156
Polubienia
8
Ocena
5
P
Printableszefer

Sloth decoration, card or magnet

This was designed as a greetings card but also suitable as a decoration. The photo shows it printed using Prusament Galaxy Black PLA and a generic white PLA also bought from the Prusa shop. I set a manual colour change using PrusaSlicer.

Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu

Pobrania
155
Polubienia
9
Ocena
5
P
PrintablesNeybao

magnetic and expandable Nespresso capsule dispenser

the dispenser itself holds 7 cups with the short extension it holds 10. A dispenser with 2 normal extensions it can hold 20 cups. But you can shuffle it deepening on your needs 2 different cups can also be put in the same "lane" so you…

Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
155
Polubienia
53
Ocena
5
P
Printablesskxc

iPad Air 4th Gen Magnetic VESA Plate / Adapter

Fits on the MK3 plate! Remove the skirt as you won't able to print it. Size 247.6 x 178.5mm Parts: 4x M4 Threaded Inserts 4x M4x5 Screws - length depends on your VESA mount thickness 16x Neodymium Magnets 10x5x3 mm Tips: Set a pause in…

Wydruk około 8,15 €–9,96 € nettoWstępna wycena jednego wariantu

Pobrania
146
Polubienia
39
Ocena
0
P
PrintablesOuwekaas

Storage box for Begali Magnetic Traveler Light

This model is an easy long print, although be aware of warping! A default 0.2mm will do fine with a 0.4mm Nozzle and Perimeters set to 3. Recommend PETG, not PLA. Used filament in the picture; Extrudr PETG color “Dessert Storm” At first,…

Wydruk około 8,86 €–10,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
142
Polubienia
18
Ocena
5
P
PrintablesCarter

Clip for Raspberry Pi Cases 3B and 4B (magnetic back)

This is a way to hold the SnapTop Cases in a small clip that can hold 4 magnets, or use Velcro or Tape. There is a pocket inside the wall that holds 4 1/2" x 1/16" D81 Magnet (K&J Magnets). There is a small frame for the magnets that can…

Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu

Pobrania
142
Polubienia
22
Ocena
3
P
PrintablesJellyTitan

Magnetic keyboard feet for M6 bolts

I'm using these feet to adhere my wrist rest and keyboard to the desk on my ergodox and gel wrist rests. Specifically - I'm trying to dial in custom ergonomic angles. The Ikea Rissla desk blotter has a metal sheet in it - so i use magnets…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
141
Polubienia
23
Ocena
0
P
PrintablesEdgar.A

Magnetic paper clip dispenser

Here's a magnetic paperclip dispenser inspired by those sold by maped. I use an 10mm magnet. If you print it at more than 0.10mm you'll need some support. That's why there are 2 g code files, 1 with supports and 1 without. Print detail :…

Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu

Pobrania
136
Polubienia
24
Ocena
0
P
PrintablesnFinity

Magnetic Magic the Gathering Commander Deck Box - Remix from Bmorr

Hey there, because i wasn't easily able to get the magnets Bmorr used, i remixed the design to use more standard round 5x2mm magnets. Yes, you can see them when the box is open. Yes, it will not be as strong as the original, but i can…

Wydruk około 6,86 €–8,39 € nettoWstępna wycena jednego wariantu

Pobrania
134
Polubienia
14
Ocena
5
P
PrintablesMarin

18650 Battery Magnetic Charge Holder

I need low power magnetic holder which is simple and quick to connect and disconnect. At the same time, has a releable connection. Here is my solution. I prefered it to real heavy duty 18650 battery holders which are realy pain with…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
129
Polubienia
37
Ocena
5
P
PrintablesHologos

Magnetic Knife Holder inspired by MKB 10 ADDA

This is a knife holder inspired by MKB 10 ADDA from Catler. It uses 28x neodymium magnets with 10 mm diameter. Use 1 mm height for 1 kg magnetic power per slot 2 mm height for 2 kg magnetic power per slot (for extra heavy knifes) weaker…

Wydruk około 3,81 €–4,66 € nettoWstępna wycena jednego wariantu

Pobrania
125
Polubienia
62
Ocena
0
P
Printablesmeagerfindings

Core One Purge Bin - (Nozzle Wiper Clearance Remix) - 6x2MM Embedded Magnets

Core One Purge Bin with Nozzle Wiper Clearance Remix - 6x2MM Embedded Magnets. No glue needed due to layer pause.

Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu

Pobrania
124
Polubienia
29
Ocena
5
P
PrintablesV1nce78

INBXX mod - Magnetic Service Hatch

With this mod the service hatch is closed with magnets, so you can open it with one hand. And it closes the air gap around the service hatch. I've used @Joakim_T's handle as a starting point (Download it, you'll need it). Add 2 magnets…

Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
123
Polubienia
31
Ocena
4,94
P
PrintablesChris P

Brush Case with 20x6x2mm magnets

This is a brush case making use of the 20x6x2mm magnets that are supplied with the Prusa MK3 printers… It's a case that holds 9 paint brushes, so you can take them with you when you are going out painting…It closes and locks with magnets…

Wydruk około 5,27 €–6,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
123
Polubienia
45
Ocena
0
P
Printablesthiebes

Heart Shaped Box w/ hinges, encapsulated magnets (print-in-place, no supports, parametric design)

Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…

Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu

Pobrania
123
Polubienia
22
Ocena
0

NEM362 magnetic coupler

Current conducting coupler for modeltrain are expensive. So both hobbyists and commercial vendors came up with the idea of a magnetic, current conducting coupler. This is my take on the that concept. What you need per car, so for two…

Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu

Pobrania
123
Polubienia
3
Ocena
0
P
PrintablesTilan2000

Magnetic door handle for lack enclosure v2

The door handles are designed for the lack enclosure v2 (Prusa MK3S-MMU2S). Magnets are integrated in the handles to keep the doors closed and aligned. On my print out I added a name on top of the handles. The files come with a plane…

Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
122
Polubienia
31
Ocena
5
P
PrintablesBlue

Prusa Core One Purge Bin (for 20x6x2mm magnets)

Requires three 20x6x2mm magnets Print in PETG

Wydruk około 2,70 €–3,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
111
Polubienia
22
Ocena
5
P
PrintablesJavacer

Magnet lock for Meiho Versus 7070 & 7050

The lock system for cover for Meicho Versus fishing boxes. Use magnets in caps 10*6mm Print instructions Use the 0.15 layer height or lover. Your can print with 0.2 layer, but thread is not cool quality.

Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu

Pobrania
111
Polubienia
5
Ocena
0
P
PrintablesoXiVanisher

Harder and Steenbeck Ultra magnetized storage

A storage for the Harder and Steenbeck Ultra airbrush. You need 8x 6 x 2 mm magnets This is part of my magnetically stacking “Airbrush Storage” system. Check out more parts for this system and my other airbrush models here on printables .…

Wydruk około 5,08 €–6,20 € nettoWstępna wycena jednego wariantu

Pobrania
109
Polubienia
15
Ocena
0

Thor's Mjollnir Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
106
Polubienia
49
Ocena
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Magnetic Exhaust Port System (No MMU Needed)

I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…

Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
102
Polubienia
46
Ocena
5
P
Printablessquinn

Circumvolving Dice Case w/ Hidden Magnetic Dual Latch

A curvy eye-catching case with a rotating top that uses hidden magnets to loosely lock the top in place in both an “open” and “closed” position. The three compartments are sized to conveniently fit the standard 7 dice often used in DnD…

Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu

Pobrania
101
Polubienia
53
Ocena
5

Dry Erase Marker Clip with Magnet Cutout

I've printed these with some generic PLA (white) and was able to churn out a half-dozen of them fairly quickly in the “upright” position, the same orientation as the close-up photos. I didn’t have enough "strong-enough" magnets to use…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
90
Polubienia
29
Ocena
5
P
PrintablesBart R

Storage Box for Here To Slay and Expansions - slightly higher and with magnets

I don't own the game myself, but a friend of mine told me that the box needs a bit more headroom if you sleeve the cards. Since the model of @LambertW_371596 is very nice and clean, I decided to remix it, only altering the height for both…

Wydruk około 1,30 €–1,58 € nettoWstępna wycena jednego wariantu

Pobrania
88
Polubienia
9
Ocena
5
P
PrintablesAnde

Magnetic compass

You'll need a 20x10x2 mm square magnet. Use slot in the compass to put the magnet in. You can add a bit of glue, but check the polarity before - if magnet is reversed, then North points to South. Then just turn the magnet around. Magnet…

Wydruk około 0,63 €–0,78 € nettoWstępna wycena jednego wariantu

Pobrania
87
Polubienia
23
Ocena
5
P
PrintablesMonte

Pi-Day Magnet

Refrigerator (or whiteboard) magnet created for Pi Day (3.14). Requires one 6x2mm magnet. I created this model with a pause during which you can place the magnet in the model on the build plate… AND a color change (two pauses total).

Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
86
Polubienia
24
Ocena
5
P
PrintablesBenoit

Logitech MX Master 3 Case (8mm dia X 3mm magnets)

I printed in PLA 0.3 draft layer height with brims. I had to clean up magnet holes a bit before magnets fit snugly in. There was a bit of a gap between front and back so I used a soldering iron to further sink the magnets in place. One…

Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu

Pobrania
82
Polubienia
9
Ocena
0
P
PrintablesMonkey Prints

Magnetic Pen Holder for Whiteboard Marker

Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…

Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu

Pobrania
82
Polubienia
14
Ocena
5
P
Printablesozgur

Baby teeth box clamshell with magnets

I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets. I printed this using black tough…

Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu

Pobrania
80
Polubienia
14
Ocena
0
P
PrintablesWiggeli

Steckdose umfunktionieren: Regal, Haken, Halter, Magnet

Mit diesen Einsätzen bekommen stillgelegte Steckdosen einen neuen Lebenszweck: sie dienen als Befestigungspunkt, z. B. für ein kleines Brett, eine Ablage oder einen Gasanzünder. Der Teil, der in die Steckdose gesteckt wird, ist etwas…

Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
79
Polubienia
13
Ocena
5
P
Printablespavel

Magnetic Gel Holder Ring for Godox AD100, AD200, V1 (Ø 3 × 3 mm Magnets)

Overview Two part, threaded holder that uses 3x3 mm magnets to snap colour-correction gels onto Godox round heads. Sized for gels cut to Ø 70-71 mm. Compatibility Godox AD100 Pro Godox V1 (all mounts) AD200/AD200 Pro with H200R round head…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu

Pobrania
77
Polubienia
14
Ocena
5

Iron Fist Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu

Pobrania
75
Polubienia
20
Ocena
0
P
PrintablesMikey B

Magnetic PTFE Tube Connector

I wanted a fully 3d printable variation of the magnetic connectors for my dry box connections. unable to find something resembling the brass push connectors, I found firstgizmo 's model and remixed it with Line Arc Line 's tri magnet…

Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
4
Ocena
0
P
Printablesfablab.ee

MAKITA 18V BITHOLDER WITH MAGNET MAGNETIC

Makita Magnetic Bit Holder for Makita 18v with magnet during work, the hand does not touch the bit Neodymium magnet used 20x6x2mm -2pcs or 20x12x2mm - 1pc Bolt M4 16mm This magnets are also used in Prusa Lack enclosure ;)

Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
71
Polubienia
20
Ocena
0
P
Printablescookiecrook

2" Bowl Gouge magnetic depth/protrusion gauge for Wolverine or Ellsworth Jig

2" depth gauge or protrusion gauge for Bowl Gouges. Works with Wolverine Vari-Grind or Ellsworth Sharpening Jigs. Has embedded 6x3mm disc magnets to snap onto any ferrous metallic surface. Use a layer stop or color change setting in your…

Wydruk około 1,53 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
68
Polubienia
13
Ocena
0
P
Printablespaururo

Magnetic Micropipette Holder for Efficient Lab Organization

Unleash the functionality and convenience of 3D printing with our free, custom-designed micropipette holder featuring integrated magnetic inserts. This holder comfortably accommodates 4 magnets of 6x3mm each, ensuring your micropipettes…

Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
67
Polubienia
13
Ocena
0
P
Printablescrashkg

Systainer Magnetic Label Mount

Print this with Snug supports off the build plate only with the magnet holes facing up. They should be super easy to tear off the runners on the side of the label mount. Now you can stick bits or anything else ferrous to the front of your…

Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu

Pobrania
67
Polubienia
13
Ocena
0
P
Printablesqse

Magnetische Kabelhalter mit variabler Magnetkraft

Hierbei handelt es sich um einen Remix des Models von rtarbutton (dickes Dankeschön ;-) ) mit dem Namen “ LTT Magnetic Cable Arches ”. Die Gründe des Remixes waren Die Konfigurierbarkeit der Magnetkraft durch den Einsatz verschiedener…

Wydruk około 2,99 €–3,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
67
Polubienia
5
Ocena
5
P
PrintablesDarius V

Magnetic tray (with source files)

Very simple and easy to print magnetic screw tray with 9 integrated magnets. Magnets are snuggly press-fitted, so glue is not necessary. There is also an optional 1 layer thick sheet, that can be used as a cover for the magnets. It also…

Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu

Pobrania
62
Polubienia
16
Ocena
0

LOGO NFL MAGNET

MAGNET TO STICK THE NFL LOGO ON THE FRIDGE It has a hole on the back side to place two 7mm magnets. It was printed with a mk4 with mmu3

Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
5
Ocena
0
P
PrintablesThe Commodore

Patriot PAC3 MSE Missile Refrigerator Magnet

People got tired of me trying to give them little tanks, and wanted rockets instead, so I drew this up the other night. It's a rather basic model of a Patriot PAC3 MSE missile, sliced lengthwise and with a couple of holes for 6x3mm…

Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
7
Ocena
0
P
PrintablesMax Ølsted

Donald Trump Fridge Magnet

Uses 8*3mm magnets

Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
8
Ocena
0