1228 modeli
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks. Nonetheless, the original design is not usable for FDM due to…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
This model converts a cheap microphone boom arm into a positionable GoPro camera mount. Utilizes stock GoPro mounting hardware, and fits all standard GoPro mounts. V1 Pictured. V2 includes improvements to design to reduce filament usage…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
I changed the handle to fit a logo clip for our school news. Used Sunlu black PLA Printed on Creality CR-10
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets
Wydruk około 1,22 €–1,50 € nettoWstępna wycena jednego wariantu
The clamp and mic clip compoentants are from two sources that i merged together. I'm trying to find the original builders again to credit them. The clip source can be found here .
Wydruk około 2,84 €–3,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is for the the Steinberg The inner width is 160mm the height is 50mm perimeter:2 infill:15% There are holes for screws to mount it - which i did and would recommed. Normally i use double sided tape - which has sometimes problems…
Wydruk około 9,09 €–11,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A connector cover for Tidradio H8. When use an external microphone, the original cover is bad, so i design this custom cover, works well with the original screw. I print in TPU and PLA, all other material should works. In files section…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Obsbot makes some nice tech for taking and producing videos. One of those things is a video converter module. This item allows you to mount the Obsbot video converter to a microphone stand and is offset to allow the stand to be stowed…
Wydruk około 3,35 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix to mount a microphone (Plantronics AUDIO 300E) on my Canon R5. Printed in PETG to get some flex, this hot shoe adapter allows for orientation adjustment of the microphone (balljoint).
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
Kids love to sing and these toy microphones can add to the fun. Another optional for use is the tried and true "whomever holds the microphone gets to speak, while others listen". And of course, there's always the classic "drop the mic"…
This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid. Fully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm…
Use it as props, award or a simple decoration. For other half load one more model aside and miror it. Glue after its done. Print flat side down, no support, lightning infill for faster printing and material saving.
Hey all! This is my custom Microphone stand I designed as I bought a microphone that came without a boom or a stand. It should fit most standard shock mounts (refer to the second picture). Do print with a fairly high infill for strength,…
Mount (clip) for Shure SM58 and other compatible microphones. With 3/8-16" mount (for standard microphone stand) and 1/4-20" mount (for photo stands/tripods). Can be used with original screw and nut as well as any part can be used instead…
Update 5/17: Added a bottom with a GoPro mount. With a couple GoPro arms you should be able to use my Yeti pop filter with this mic holder: https://www.thingiverse.com/thing:4234982 . Update 5/3: Added step file and 1/4" threaded bottom.…
A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…
Female 3/8"-16 to Male 1/4"-20 adapter. Designed to convert desk microphone boom arm to use standard camera tripod attachments. Print on side to prevent shearing when threading on 1/4" side. Suggest 100% infill for strength. Print…
This is a 3/8 inch female to male 5/8 inch microphone stand adapter. It fits a ton of different stands and microphones. It includes a flat screw like cutout so you can easily tighten it. The images show the adapter on the Blue Snowball…
No one wants to be left out at karaoke time, including Lucky 13! Based on @DJMac_255353 's Toy Microphone. Colors loosely based on a Shure SM58 with a black stripe for contrast. Brim recommended. Some post processing may be required. My…
If you're doing a video shoot that represents a brand and you're using a handheld mic, you can display the logos on your microphone using this microphone flag. The interior of the block is filled with foam to help it grip the microphone…
This is a replacement part based on the WindTech CC-6 Mic Stand Cable Clip for microphone stands and boom poles. My brother has a set of these from Sweetwater they work great. Eventually a couple ended up breaking, so I designed a…
Cool 3D printed retro microphone table lamp — a vintage-style night light for music lovers, studio desk or bar decor. Fits the tBulb B dimmable USB LED module. id : be10031a10 size : 138X127X298 mm files : 7 pieces : 10 maximum size of…
I modified my original Generic Streaming Microphone Shock Mount Reference to improve its printability. Try it for yourself and throw a like if you think it will work well for you. Changes include: Tapered posts, holes, and elastic slots…
This is a mic handle designed to fit a DJI Mic wireless transmitter module. The handle holds the transmitter unit securely by the clip and is designed to fit a foam windshield with a 40mm opening. From experimenting, the cheaper…
Welcome! The Fifne AM8T mic is a great budget option. I've been using mine for a while, and at the 60 USD price point with a boom arm, is a really good budget option. But one thing was wrong with it, no shock mount. The mic is connected…
This microphone prop / toy was designed to accomodate costumes that need a hint of color to match. This microphone prints in multiple parts so that each section can be in the color of choice. The microphone connects via a twist & lock…
Alastor from the animated show Hazbin Hotel has a staff (cane? wand?) with a microphone on top that helps him channel his powers. After looking at various angles of it, it seemed like a not-quite-screen-accurate interpretation of it would…
If it's a microphone stand you're searching for, you came to the right place! A bit of parts salvaged from : Stand : https://www.thingiverse.com/thing:1993382 (has some nice plugins for the stand if you're into that kind of thing) SM57…
A simple standard microphone stand adapter from 3/8" to 5/8". Made with fusion360.
Microphone stand adapter 5/8 inch female 3/8 inch male no support needed
mic cable clips for boom arm (cable:5 mm, arm:10*10 mm) Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.2 mm Filament: Prusament PLA Category: Audio
The base part that clips onto the Samson G-Track Pro microphone can be found here: https://www.printables.com/model/219694-samson-g-track-pro-pop-filter Otherwise, you can remix your own adapter base for your microphone. I have a clunky…
This is a sparepart for the Vtech Kidi Super Star DJ Studio.
My daughter requested a microphone for her pop star costume and I decided to design one for her. I sliced the top grille in Slic3r and printed without any support. As I wanted to do a color change for the shaft and bottom grille, I sliced…
Anti-Roll Collar compatible with Shure Microphone. We could not find the original to purchase. Was designed around the Shure ULXD2 but may fit other models Works with rigid filament, but may be better with a flexible filament.…
no remix, but I think it is easier to find that way. I didn't have a 5/8" screw and didn't know where to get one. If my screw is to long just scale up the ring.
This is a microphone flag to be used with regular handheld interview microphones. I have tested it with my Shure Beta 58A microphones, but it should easily fit many other vocal/interview mics. The OpenSCAD file is made so that it is easy…
Designed to hold 4 wireless microphones in each holder. Modeled around the Phenyx Pro Wireless Microphone. Print top down and no supports are needed.
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…
I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…
drum microphone holder Layer height - 0,2 0,4mm nozzle Filament PLA or Petg printing with support
Microphone stand for Audio-Technica ATR2500-USB. Will probably fit other brands as well, since it simply screws on (16mm). This is the first version, and can definitely do with some improvements, happy to hear some of your constructive…
An isolating shock mount for the miniDSP UMIK-1 measurement microphone. The mount is intended to be installed on a monopod, tripod or selfie stick with a ¼" or 3/8" screw. It isolates the microphone from a broad range of vibrations, which…
The original design was developed to be machined out of aluminium. It was discovered that the test print works just fine as a mount. Redesigned the mount to have a higher safety factor at the stress concentration. Recommended to slice…
Can be printed in one or 2 parts. Printed on 0.16mm layer on a X1C.
Printed this one with 0.25mm nozzle for better detail and function. When putting on microphone is need to be very careful because is very tiny thing so you could damage it. After putting on microphone it works as original! If you like my…
A sturdy part that clamps with two M6 screws to the pole of the monitor stand arm 35.5mm pole and can hold one of those boom arms for a microphone that looks like the Pixar lamp
If you need a microphone stand, this microphone stand is a good choice ( This microphone stand is made for microphones with a diameter of 4.5 cm ) Best results found to be using a default settings: Layer height - 0,2 or 0,1 0,4mm nozzle…
Microphone to camera screw adapter This adapter allows to screw a microphone mount onto a common camera thread. (3/8 - 16 UNC to 1/4 - 20 UNC) Feel free to support my work and leave a tip.
I modified the holes to work perfectly with 2 M3 bolts and mount flush. For the base, i used a dowel connector (depending on your printer settings, you may or may not need to slightly sand the dowel down a bit). If you use Bambu Slicer or…
Alastor the Radio Demon's microphone (from Hazbin Hotel) - Remixed @salamanders_176168 model to print with no supports needed
Realistic recreation of the Microphone holder at the rear of A320 Sidestick Cabinet. Designed for cabinet with 5 degree slope, but would work if top was flat. Print in black PLA, 100% infill for strength. Both a complete model and a…
I had the need to mount a USB-microphone and some other accessories to my workplace table. I didn't like what I could buy on Amazon, so I made my own “c-clamp microphone boom” and called it the “Varioboom”. The project grew a bit and now…
A minimalist table stand for your microphone. This version has the same interface as the original version . The base is slightly larger and perhaps better looking. Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts:…
Requires 1 x M5x25mm bolt and nut. M5 nut need to be inserted during printing of Knob v2.stl after layer 28 (0.2 resolution).
This is the upper replacement part of a shure microphone holder. Printed with black PETG with support. The stl is a little bit messy, but slicer correct it when u load. top microphone hole diameter: 25mmm bottom microphone hole diameter:…
Length: 180mm. Six models in total. Two bar variants: 1. with 1/4-20 and 3/8-16 threads. 2. with bare holes for (1/4-20 and 3/8-16) brass inserts. Four screw variants: 1. Long screw with 3/8-16 thread. 2. Short screw with 3/8-16 thread.…
I made this stand because of using microphones on daily basis and rolling of them on tables was terrifying! For this design you need: 4x cabinet door bumpers (10mm) 1x furniture leg soft sticker If you like my work please support me. :-)…
An adapter that allows you to connect items that take a ¼" screw head and use it with a 5/8" screw head commonly found on microphone stands. Useful for attaching things like camera mounts or phone grips to mic stands for overhead or still…
Hey, i designed a easy cap for the INMP441. If you want to fixate it, just use hotglue or similar. Leave a like if you like it ;)
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…
Hello! Here is Alastor's Microphone/Staff/Cane? from Hazbin Hotel!! Most parts have some method of joinery to make sure the fitment is correct, so assembly is very easy, just requires glue or plastiweld. I personally recommend plastiweld,…
I've added fastening for a shure sm57 (and similars) to the original model.
The threadings of the screws: inside ANSI UST 5/8-27 UNS outside ANSI UST 3/8-16 UNC
Modified to make front panel thinner for Yaesu mic stud. Modified to make pocket deeper to make room for rack mount screw behind mic stud. Remixed from CB/Ham Radio Mic Holder Remix II:…
The plastic bolt was clipped on the original stand adapter, can be taken off by force. https://fifinemicrophone.com/products/fifine-k683a-type-c-usb-microphone
After the shockmount of my RODE VideoMicro broke, I designed a new one that could replace the original Rycote mount. Both PLA and PETG have worked well for me. The original hardware of the coldshoe mount can be used to mount the print.…
1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…
I needed a 4inch kick port for my floor tom conversion. Why pay $50+ for a plastic ring when you can print one?! Ive even added a screw so it can be removed/replaced later. It took me a couple of iterations to find a light weight and…
All parts can be printed in the given orientation. The TripodSwivelHead needs some support
Here is a simple solution to protect your microphone from shocks. I use it for a Shure SM58 whit hair ties to insulate.
I needed to connect my Razer Seiren Mini microphone to a camera tripod so I quickly made one. It took me 30 minutes to design and print this with help from these models: Mic Microphone screw thread extender. 5/8" five eigths inch. by…
Was looking for a microphone prop for an upcoming project but couldn't find what I was looking for… so I made one! The sign is separate (and optional) and just holds on with friction - although I jammed some paper in there for a better…
A table top mic stand to keep your wireless microphones from rolling away. Designed to fit the Shure ULXD2/SM58 but likely still useful for microphones of a similar shape. I made this stand so we could have microphones on all of the…
Designed this a few years ago to fit a Sure Lavalier mic after the original broke. Inside diameter of mic mount 11.7mm. Remixed from: https://www.thingiverse.com/thing:23325
This model is compatible with the lego system.
Protect your microphone signal from part of the echo of the room. Print : 2xSidePanel 1xFrontPanel 1xMicrophoneHolder Buy : 4xM4 10mm screw 4xM4 self-locking nuts 3x25x25cm soundproof panels I printed the panels on their round side, with…
A printable 1:1 model of the Shure SM58 microphone. Designed to help prototype a custom grip. Could also be a prop.
Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.
Using the Microphone Flag allows you to place your logo on the mic. This is an easy to print cubical mic flag. Print with No Supports. After printing, place a foam sponge with a path in the middle to grip the mic, and insert the cover to…
I misplaced my original desk clamp that came with my YetiCaster boom arm. It's easy to find other C-clamps, but it's NOT easy to find a clamp that fits the silhouette of the base of the arm. Attach some self-adhesive padding to the end of…
A modular desk stand for Lavalier-type clip-on microphones. The stand comes in three parts: Base, arm and replaceable mic clip. The arm is available in 200 and 250 mm length and clips into the base - no fasteners or tools required. I used…
Print the cello and double bass adapter with TPU with 100% infill. I used Filaflex 82A For the pencil mic adapters both PLA and PETG work. No supports, only the 170 version doesn't print very nice but is still okay. For the cello, my…
his 3D model is a sleek and functional microphone cube holder, designed for those who need a professional and customizable solution for holding and branding their microphones. The cube features a practical open structure that can securely…
I found the height of the QuadCast on the stand to get in the way of my monitors. This makes the overall height much lower, and allows for more clearance under the stand if you want to bring it forward under your keyboard. Uses all the…
I was looking for a holder for JBL wireless microphones. These mics are thick, so I had to draw my own mount. The print consists of two parts and they are connected by an M6 screw. I printed the holder from TPU and the other part, in…
Another variation of t.bone ovid/DPA microphone Intended for the left/bass side of accordion to attach the microphone to the accordion belt. Intended to use with this ebay cable organizer .
Originally published here: Microphone raising trophy, second model by tato_713 - Thingiverse I made this as a reward for the first place of a freestyle rap contest, much like my first trophy model . Originally it had graffiti-like…
I designed this for the On Stage Stands Tripod Boom Microphone Stand (MS7701). More information available here . Category: Music
A click-on microphone holder for JBL wireless microphones to be easily carried together with your JBL Partybox 310. No support nor brim needed when printed on a side. made with tinkercad.
Designed to package or display Shure SM58 Microphones. No supports required.
Case that fits ESP32 mini board and INMP441 microphone with wires inside
Desktop stand for the K669B Microphone
I got one of those cheap microfone stands that you can clamp on your desk, and where the arm and the clamp meet there's very bad plastic sleeve that has way too much play. I designed this sleeve that has a very tight tolerances so it…
