Wyniki wyszukiwania: mite

Sortowanie

1133 modeli

P
PrintablesMiguel M.

DeWalt Miter Saw Zero Clearance Insert

This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…

Pobrania
1511
Polubienia
268
Ocena
4,91
P
Printablesfifindr

Miter Box - 90°, 45°, 30°, 22.5° with Ruler

Use 0.24mm layer height, 3 walls. A compact miter box designed for cutting small round rods, square strips, beams, dowels, and similar materials. The tool includes saw guide slots for: • 90° • 45° • 30° • 22.5° The 45°, 30°, and 22.5°…

Pobrania
1454
Polubienia
767
Ocena
5
P
PrintablesBodo

Grid for Sortimo and Stackable Insertboxes - unlimited sizes

These baseplates provide a fixed place for your insertboxes: in your workspace, cupboard, drawer and all sorts of cases. The interlinkable systems allows bigger sizes than any printbed. Besides the injection-molded industrial/trade type…

Pobrania
227
Polubienia
46
Ocena
5
P
PrintablesMatt Beechan

Table Saw Miter Slot Runner (SawStop)

After a couple seasons of expansion and contraction on my hard maple table saw miter runners, I needed a solution that would be consistent season to season. These table saw runners for SawStop miter slots were designed to fit on the MK4S…

Pobrania
168
Polubienia
39
Ocena
0
P
PrintablesStephen Massman

Delta 36-670 table saw miter slot slide

This fits my Delta 36-670 table saw and will work great for crosscut sleds or one off sleds. I printed it diagonally to fit on my large printer. I have included the gcode for the Elegoo Neptune 4 Plus.

Pobrania
142
Polubienia
16
Ocena
5
P
Printablesmaxmar

Miter Clamping Jig (Gehrungsleimhilfe)

This jig helps to clamp and glue miters at different angles (not only 45° angles). You need three clamps and two jigs to apply the jigs to one corner/miter. To prevent from slipping while clamping, I recommend to apply sand paper with…

Pobrania
99
Polubienia
23
Ocena
5
P
PrintablesRD

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw

Bosch GCM12SD Shadow LED Light Upgrade – Custom 3D Printed Bracket + Full Install I designed and installed a custom shadow LED light system for the Bosch GCM12SD Glide Miter Saw, turning this already outstanding tool into a…

Pobrania
65
Polubienia
15
Ocena
0
P
PrintablesLeonardo

Festool - MFT/3 - Support for Guides and Miter Gauges

Inspiration The Festool MFT/3 multifunction table is an incredible tool, equipped with a miter gauge and a rail system for precise angled cuts—fantastic! However, when I don’t need to cut, I want to make full use of the table’s surface…

Pobrania
50
Polubienia
22
Ocena
0
P
Printablescookiecrook

Grate/vent/filter for lathe/miter dust collection hood

Grate or vent for dust collection hoods you might use behind a lathe or miter saw. Mine is sized to fit a PSI Woodworking “Big Gulp” dust hood that mostly I use on the lathe or behind my belt sander, but this might work for other hoods…

Pobrania
15
Polubienia
4
Ocena
5
P
PrintablesF Engineering

ISO 7000-0001 limited rectilinear motion

EN: To indicate limited rectilinear motion. DE: Zum anzeigen einer begrenzten geradlinigen Bewegung.

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesUniQrint

3D Flexi Baby Dragon Keychain (Limited Time Free)

🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…

Pobrania
17 847
Polubienia
2322
Ocena
4,87
P
PrintablesUniQrint

3D Flexi Platypus Keychain (Limited Time Free)

By supporting my Patreon , I can continue offering free models. Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). There are two…

Pobrania
8318
Polubienia
1154
Ocena
4,96
P
PrintablesUniQrint

3D Flexi Unicorn Keychain (Limited Time Free)

By supporting my Patreon , I can continue offering free models. Get the 'Flexi Animal Keychain' Welcome Pack and the 'Flexi Dinosaur Keychain' Welcome Pack exclusively on my Patreon (Limited offer) There are two versions available: the…

Pobrania
7057
Polubienia
862
Ocena
4,88
P
PrintablesUniQrint

3D Flexi Dragon Keychain(Limited Time Free)

Hello everyone, this is my first attempt at designing a flexible dragon. It may not be perfect, but I hope to receive your support and feedback to improve it in the future. Thank you!😀 Get the 'Flexi Animal Keychain' Welcome Pack and the…

Pobrania
6694
Polubienia
926
Ocena
5
P
PrintablesUniQrint

Flexi Dog Keychain (Limited Time Free)

🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…

Pobrania
4753
Polubienia
558
Ocena
4,67
P
Printablesreddadsteve

Yosemite Sam

Yosemite Sam, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is commonly depicted as an extremely aggressive, gunslinging outlaw or cowboy with a hair-trigger temper and an…

Pobrania
4421
Polubienia
1594
Ocena
4,99
P
PrintablesUniQrint

Flexi Dino Apatosaurus Keychain (Limited Time Free)

🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…

Pobrania
4141
Polubienia
694
Ocena
5
P
PrintablesUniQrint

Flexi Otter Keychain (Limited Time Free)

🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…

Pobrania
4052
Polubienia
635
Ocena
4,5
P
PrintablesUniQrint

Flexi Shiba Inu Keychain (Limited Time Free)

🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…

Pobrania
3855
Polubienia
586
Ocena
4,5
P
PrintablesUniQrint

3D Flexi Seal Keychain (Limited Time Free)

By supporting my Patreon , I can continue offering free models. Get the 'Flexi Animal Keychain' Welcome Pack and the 'Flexi Dinosaur Keychain' Welcome Pack exclusively on my Patreon (Limited offer) There are two versions available: the…

Pobrania
3759
Polubienia
544
Ocena
4,88
P
PrintablesBwolfey

Zero Play Guide Bars for table saw miter slot

The zero play guide bar system is a huge benefit for anyone making and using jigs in a climate where conventional wood guide bars will expand and contract. I will use this with my table saw miter slot but you may find it useful with your…

Pobrania
3177
Polubienia
735
Ocena
5
P
PrintablesVlad Grigore

3D Multi Angle Measuring Ruler 45/90 Degree, Carpentry Square Protractor Drawing Line Ruler Miter Triangle Layout Tool

Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…

Pobrania
2999
Polubienia
876
Ocena
4,78
P
PrintablesUniQrint

3D Flexi Sperm Whale Keychain (Limited Time Free)

🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…

Pobrania
2050
Polubienia
307
Ocena
5
P

PS2 3.5" HDD Caddy (including Limited Edition - Shitfunx sux)

Design I had originally designed a 2.5" HDD Caddy for the PS2, and then recently found out that a certain company had used that to make a commercial remix to support 3.5" drives. All my models are released as non-commercial to avoid such…

Pobrania
1665
Polubienia
65
Ocena
4,4
P
Printablesgoonbee

Star Wars Unlimited Tokens - Multicolour

Star Wars Unlimited Tokens ready to print for multi material / multi extruder.

Pobrania
1661
Polubienia
114
Ocena
5
P
PrintablesPugwhan

Star Wars Unlimited Tokens

The manager of our local Game Store wanted some tokens for the Star Wars Unlimited game. He had some examples he wanted copied. So I created these. No includes files for each separate token.

Pobrania
1374
Polubienia
83
Ocena
5
P
PrintablesRobagon3D

Stalagmites for Gloomhaven

Stalagmites tile overlay replacement for Gloomhaven board game. I was not having good luck printing other stalagmites when scaled to 28mm, so I made some that hopefully will work better. Tile Count: 6x (1 hex) Stalagmites Print…

Pobrania
1261
Polubienia
186
Ocena
4,93
P
PrintablesAndré Lind

Insert for Gamegenic Deckpod for Star Wars: Unlimited

Also included a taller variant if you want it to go all the way up to the edge of the token box The "special" variant of the insert holds the exact amount of tokens included from GameGenics

Pobrania
1152
Polubienia
70
Ocena
5

Box for FFG Star Wars Unlimited Premium Tokens

A box to store the FFG Premium tokens for the CCG Star Wars Unlimited. There are 3 versions of the lid. One with a design that requires multicolor printing (Lid Design) One plain lid for single color (Lid Plain) One lid with a design for…

Pobrania
1148
Polubienia
124
Ocena
5
P
PrintablesClockspring

Mini Craft Miter Box

I really love that 3D printing lets us create tools and solutions for anything and everything! If you're making a full-size box or picture frame, you'd use a mitre box or something similar. Cutting angles precisely needs tools and jigs,…

Pobrania
1078
Polubienia
364
Ocena
5
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Pobrania
1074
Polubienia
119
Ocena
4
P
PrintablesPrism08

Differential #5 with limited slip RC Unimog edition

06/01/24: I have released my UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale . Remixed for my Unimog RC design (in progress). See my Diff #4 for mounting instructions. You need 8 MR63ZZ ball bearings per differential (for Unimog 16…

Pobrania
1066
Polubienia
246
Ocena
5
P
Printableszarnold16

Customizable Miter Box

Customizable miter box. The material size and angle of the cut can be customized. This was created in OpenSCAD. This was also created for the MTU MSE4777 class. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Pobrania
1061
Polubienia
94
Ocena
4,89
P
Printablesfifindr

Mini Miter Box (90°, 45°, 30°, 22.5°)

Use 3 walls. A compact miter box designed for making accurate angle cuts on small materials and hobby projects. The guide features cutting slots for 90°, 45°, 30°, and 22.5° , making it ideal for precise and repeatable cuts. It works…

Pobrania
980
Polubienia
377
Ocena
5
P
PrintablesRoman

Limiter for plastic window

Useful window fixing device.

Pobrania
925
Polubienia
94
Ocena
5
P
PrintablesPrism08

RC CAR Differential #4 with limited slip

This works like an open differential but unlike an open diff it will send some torque to the non slipping wheel. It is compatible with my RC car V2 https://www.printables.com/model/281110-new-design-rc-car-v2-almost-fully-printed ; I've…

Pobrania
877
Polubienia
117
Ocena
0

Deck Box for FFG Star Wars Unlimited

A box to store your deck for CCG Star Wars Unlimited. There are 4 versions of the lid. One with the Unlimited logo that requires multicolor printing (Lid Design) One plain lid for single color (Lid Plain) One lid with the Unlimited logo…

Pobrania
821
Polubienia
85
Ocena
4
P
PrintablesCollisto

Miter Box and Saw

Simple 45 degree and 90 degree miter box and handle for hacksaw blade. These were made when I first got into 3D printing and were created or modified in TinkerCAD. Original Knife handle is taken from…

Pobrania
771
Polubienia
81
Ocena
4,86
P
PrintablesResphiq Ann

MITER GEAR

Spesification model : Gear type = miter gear Gear pitch = 16 Number of teeth = 16 Gear pitch diameter = 1" OD = 1.09" Overal width = 0.75" For shaft diameter = 3/8"

Pobrania
758
Polubienia
72
Ocena
4,5
P
PrintablesLGC-

Miter bar for Bosch GTS10J table saw

I designed this miter bar because the one included with the saw has too much play. The aluminium miter slot is 21mm (when new) but will wear down with use and it will wear more at the front than the back. Instructions: Print the test…

Pobrania
735
Polubienia
107
Ocena
5
P
PrintablesDmitrii Tomin

Torsen differential - Limited-slip differential

This project features a 3D printed model of a Torsen differential , a type of limited-slip differential used in automotive applications to improve traction. The model is designed for educational purposes , allowing enthusiasts and…

Pobrania
696
Polubienia
125
Ocena
4,5
P
PrintablesUrba Medo

Miter box - saw guide - angle cutting jig

Saw guide for accurate angle cutting (FreeCAD file attached). I printed with 0.6 mm nozzle, 4 walls and 50% Adaptive Cubic infill which resulted in relatively stiff walls when printing with PLA. Also I added a brim to reduce warping. This…

Pobrania
684
Polubienia
303
Ocena
5
P
PrintablesShopTeacher

Ridgid Shop Vacuum to DeWalt Miter Saw Adapter

This model has been remixed to fit a Ridgid NXT 2.5" hose (2.25" OD at connector) to a DeWalt Sliding Compound Miter Saw - specifically model DWS780 but it will fit other models. Chamfers have been added to the vac locking mechanism and…

Pobrania
682
Polubienia
109
Ocena
4,33
P
PrintablesBrownie86

The Riptide (Topwater Popper Fishing Lure) Limited Time!

This popper requires some weights. You can use split shots but I recommend using a ¼" slingshot ammo or a ¼" ball bearing. This is a very detailed topwater popper which should be printed mouth down with some custom supports for the most…

Pobrania
679
Polubienia
63
Ocena
0
P
PrintablesLadislav Mikula

Mobile phone holder - limited edition for Gabina

I used PLA material with a granite motif for printing. I adjusted horse back where the mane ends. I also added a tail from another project. He removed the horse fur and added his own version. The original model had a lot of problems with…

Pobrania
642
Polubienia
71
Ocena
3,67
P
PrintablesMadary Prints

Dust Collector For DeWalt Miter Saw

WARNING: I am not sure what versions of saws this model is supposed to work on. I remixed this for a family member's saw (I don't know what model they had), but it didn't even end up working for me. The only reason I have this posted is…

Pobrania
604
Polubienia
69
Ocena
3
P
Printablescdsmakestuff

Table Saw / Miter Slot T-Nut

If you find this useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Miter Slot T-Nut for Table Saw or other tool with similar "T" slots These are probably (most likely) going to fail if you tighten them toooo…

Pobrania
595
Polubienia
126
Ocena
5
P
PrintablesPieter

Dynamite clock

Hello Parts Arduino nano (Arduino uno will also fits) 4 digit display with tm1637 chip Ds 3231 RTC 9v adaptor 1,5mm electrical wire (decoration) Glue Assembly When you have printed all the parts, you can place the screen in the "Display"…

Pobrania
592
Polubienia
273
Ocena
4
P
PrintablesJorge

PRUSA Nextruder thumb Hexagonal Key with TORQUE LIMITER

Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…

Pobrania
588
Polubienia
248
Ocena
4,75
P
PrintablesJoseph Craig

DeWALT Miter Saw Replacement Clamp For heavy duty Stand

DeWALT has a awesome heavy duty miter saw stand (link below) that is fairly easy to use as there are two clamps on the bottom of the miter saw that clip on too the stand. When somebody dropped the miter saw one of the black clamps on the…

Pobrania
554
Polubienia
55
Ocena
5
P
PrintablesKilian Herbst

Modular Pedal Board (Unlimitedly Expandable)

The great Musician Jonas (Instagram: Jon_bei) needed a quick way to install and a simple Paddle Board so we designed one, it is easy to print and doesn't need any Supports, the Paddles are Fixed using 3cm Velcro. Printing Notes: The Stl…

Pobrania
547
Polubienia
113
Ocena
5
P
PrintablesLCruz3D

Incense Holder - Explosive Dynamite

My girlfriend ask me for an incense holder one day and I decided to surprise her and made this simple, practical and funny design. I've divided the object to make it easier to clean the ashes. I've made 2 versions of the tray for each…

Pobrania
537
Polubienia
189
Ocena
5

Grimace Unlimited Edition Adult Happy Meal Toy

After seeing these toys like this selling for way more online than they were worth I decided to try my hand at modeling them. If you like this model, let me know and I'll make the rest of the set. 6 models are included that are 3…

Pobrania
521
Polubienia
85
Ocena
5
P
PrintablesWoodenti

Miter Gauge for DeWalt 7492

This much more precise miter gauge helps to avoid the play between the groove and the standard miter. Depending on your print settings, you might want to print a section first to check the fit in the groove. it requires 2x M5 and 1x M6…

Pobrania
513
Polubienia
93
Ocena
4
P
PrintablesTim Piatek

2x4 Shelf Bracket (Similar to Yosemite Brackets)

Update 3: The v3 “Slim” files. Final new version for now is a pair of new files, the “slim” brackets. I trimmed some material off that may not have been necessary, speeding printing and saving material. I thickened the bases to ½" for…

Pobrania
504
Polubienia
89
Ocena
5
P
Printableskaje

Miter Gauge

Often used equipment such as table saws and band saws are missing the miter gauge. With the addition of a correctly sized slide this can be used as a replacement. There are three parts - the protractor section, the handle, and the…

Pobrania
498
Polubienia
50
Ocena
5
P
Printablescaesar_1111

Miter Box with clamping Pegs 15, 30 and 45 degree

Miter box with peg holes allows you to clamp the pieces into place with pegs (1mm steps). freeCAD model inlcuded for personal adjustment. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: No Resolution: 0,25 Infill: 30…

Pobrania
487
Polubienia
49
Ocena
4,8
P
Printablesabitrandom

Miter Slot Runner - Customizable

Customizable miter slot runner generator. This is useful for making custom table saw and router table jigs. Variables include length, number of holes, nut or countersink screw holes, optional t-groove. Example print settings: Elegoo…

Pobrania
481
Polubienia
108
Ocena
4,5
P
PrintablesTwotone74

Fräs-Jig 45° Gehrung Makita RT0702C / Router Jig for 45° miter connection

Deutsch: Die Idee für diesen Fräs-Jig kam mir, als ich dieses Video vom YouToube-Kanal “Gipfelholz” gesehen habe: Da ich keine Tischkreissäge habe, wollte ich das Teil statt dessen einfach drucken. Ich habe das Teil so konstruiert, dass…

Pobrania
481
Polubienia
157
Ocena
0
P

Star Wars Unlimited Deck Box

This design does not have the custom names on it. This is a remix of the Rugged Box (Parametric) by Whity on Printables.com. Design inspired by Rugged Commander Deck box bySnoogins0880 on Printables.com with my twist on it. I wanted a box…

Pobrania
478
Polubienia
79
Ocena
5
P
Printablesblerghcity

dwe7485 Miter slot

The miter slot on the True-FLEX featherboard didn't fit my dwe7485 so I took the exact dimensions of the crosscut miter that came with the saw and made a compatible miter slot for the board. Uses m6 screw and nut

Pobrania
473
Polubienia
84
Ocena
3
P
PrintablesJoe

Yosemite Sam

Yosemite Sam from Looney Tunes Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…

Pobrania
470
Polubienia
63
Ocena
5
P
PrintablesBishop

Gamegenic Star Wars: Unlimited Token Holder

A token holder for the acrylic SWU tokens released by Gamegenic that fits in the deck pod.

Pobrania
470
Polubienia
26
Ocena
5
P
PrintablesLordFisch

Star Wars: Unlimited Token Organizer

Holes in the bottom of each compartment help with easy retrieval of token, by simply pushing up the whole stack. Update: you may want to put the lid upside down on the printbed to prevent supports. Additionally, the divider in the front…

Pobrania
466
Polubienia
54
Ocena
4
P
PrintablesGeoff Pedder

Dewalt DWS779 miter saw Shop Vac Adapter 2.5"

Adapts DWS779 miter saw dust port to a 2.5" shop vac Prints ok without supports. The fit on the saw is a tight friction fit to keep it on without any extra support. May also fit other dewalt saws with 42mm outer diameter dust port

Pobrania
459
Polubienia
57
Ocena
5
P
PrintablesMarcel

Miter Box 45/90

Woodworking miter saw box with pressure wedge

Pobrania
459
Polubienia
48
Ocena
5
P
PrintablesWoodenti

zero clearance adjustable miter runner insert for table saw

Update Additional model for 16.4mm - 17.5mm grooves (fits Bosch GTS X10). (In case your groove is only marginally smaller, i suggest to manually grind it off) Idea Above the final miter runner the cross cut sled will be placed which will…

Pobrania
452
Polubienia
143
Ocena
5
P
PrintablesTwirleyTron

Table Saw Miter Track Runner

Made specifically to fit Ryobi 10" table saw miter slot, but should fit any miter slot 11/16 or smaller

Pobrania
446
Polubienia
87
Ocena
5
P
PrintablesEMN

Giant Lego-like Dynamite 10:1 Scale

Inspired by https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale I've included this as a full print - supports required for the band. And as two parts with no supports required.

Pobrania
444
Polubienia
114
Ocena
5
P
PrintablesCoreAxisDesigns

Dewalt dw708 miter saw dust collection fitting

I made this model for a past teacher of mine who had two of these saws and the second one was missing the outlet cover. I had to sketch around the outlet because there was no straight line to measure off of. I then imported the picture…

Pobrania
441
Polubienia
54
Ocena
0
P
PrintablesJannisJFry

Rod and Tube Cutter for Dremel with Limiter

I just added a M6 nut inside of the Guide from GreaseMonkey88s Rod and Tube Cutter for Dremel (Thanks a lot for this Design!). I added a wing nut on the bolt to change the height without tools. I also made a version based on rckabs Rod…

Pobrania
430
Polubienia
104
Ocena
4,8
P
PrintablesErik Stenborg

Blum Hinge Angle Limiter 86 deg

Original parts are made in Nylon or ABS, but it printed fine in PLA, and seems to work well. Installation instructions: https://ea.blum.com/en/opening-angle-stops-for-110-and-107-hinges/ Print with the flat j-shaped side facing down for…

Pobrania
428
Polubienia
34
Ocena
5
P
PrintablesTheGunPlumber

Camp Grizzly 2nd Ed Limited Release - Insert

Details / Notes: 27 July, 2026 Update: Modified Model #6 (Behind the Bear tray) to v2. Added shelf behind text to avoid issues on printers using >0.4mm line widths. Dimensions optimized for 0.4mm nozzle, 0.2mm layer height. Largest model…

Pobrania
426
Polubienia
37
Ocena
4,75
P
PrintablesCheeseMcGee

Ridgid Jobsite Table Saw Miter Bars 1/4" and 3/8" sizes

I liked the edits on the featherboard done by r00nee, but the miter bars didn't fit in my Ridgid table saw miter slots, so I edited in order for them to fit. While I was at it, I changed the bottom of the bar to hold either 1/4-20 Hex nut…

Pobrania
418
Polubienia
103
Ocena
5
P
PrintablesJakob

Bosch unlimited 8 nozzle holder

Made to be printed in the orientation shown in pictures with supports along the bottom edge. I printed with 15% infill, 100% infill behind the three mounting holes. 0,6 nozzle size with 0,3 layer height PLA.

Pobrania
414
Polubienia
36
Ocena
5
P
PrintablesJudhini Prints

TNT Dynamite: Modular Battery Storage Container

This TNT Dynamite Battery Storage Container is designed for AAA & AA batteries in versatile 3-, 6-, and 7-cylinder configurations. The files are named using the format NAME_X_M , where X represents the number of batteries that each…

Pobrania
413
Polubienia
394
Ocena
5
P
PrintablesLoXiRe

Fully Parametric Miter Bar / Slot runner to fit everything! T slot or flat :)

Hi I needed a Miter bar to fit my saw and router table. Something i can keep a bunch of them in the drawer and make a new jig / sled within seconds. so they connect like legos . also wanted the option for drop in bars and enclosed bars. I…

Pobrania
407
Polubienia
66
Ocena
0
P
PrintablesPNWPrints

SawStop Miter Slot Runners

I needed to make a new crosscut sled and thought I’d print the miter slot runners for my SawStop PCS. My printer’s bed didn’t allow for the length I wanted so I had to print it in multiple parts. I made a long and short version so you can…

Pobrania
402
Polubienia
62
Ocena
0

Miter Saw Protractor

This miter saw protractor is specifically designed to ensure a correct and precise miter angle with no effort. The miter protractor could provide you the exact angle you need (inside or outside corners) to make your perfect trim for crown…

Pobrania
400
Polubienia
68
Ocena
5
P
Printableschvvkumar

Yosemite National Park - Yosemite Valley

A model of the Yosemite Valley in Yosemite National Park. One of the most beautiful places on Earth. This model includes the area between Tunnel View to Cloud's Nest. Category: Models

Pobrania
400
Polubienia
57
Ocena
5
P
PrintablesStrandedOrg

Small Mitre / Miter Box (1 inch / 26mm)

Small mitre box with a 1 inch / 26 millimeter channel for 45 and 90 degree cuts.

Pobrania
384
Polubienia
38
Ocena
5
P
Printableslehmi

Miter Box

20% infill and no supports

Pobrania
383
Polubienia
48
Ocena
4,8
P
PrintablesHanselcj

Zero Clearance Insert, Miter Saw Plate, DW715

I created a zero clearance insert to replace the standard stock insert on my DW715 Dewalt Miter saw. This one has been in use for a few months now and doesn't show any serious signs of wear. It requires a long bed (I have a prusa i3), but…

Pobrania
373
Polubienia
54
Ocena
4,6
P
PrintablesChase Adkins

Skil Table Saw TS6307-00 Miter Bar

This is a 300mm miter bar that fits the Skil TS6037-00 table saw. It has 5 holes in the top that I used for heat set inserts for an M5 bolt, but the Fusion file is available if you would like to do something different.

Pobrania
371
Polubienia
42
Ocena
0
P
PrintablesBrite Minis

Stalagmite (Supportless, FDM-friendly)

A stalagmite scatter terrain piece. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…

Pobrania
368
Polubienia
38
Ocena
5
P
Printablespcadena

10:1 Precision Miter Gauge

Achieve dead-accurate, repeatable angles for fine furniture and cabinetmaking with this Precision Gear Train Miter Gauge , a fully modular accessory for your table saw. This model replaces standard friction-lock mechanisms with a…

Pobrania
366
Polubienia
187
Ocena
0
P
Printablesharbormaster

Precision Miter Sanding Tool for Model Making V2

My second attempt at this model, based on input from other hobbyists. The added protractor is by Joaelso. https://www.printables.com/model/171880-winkelmesser-protractor The M4 knob is by StriK3FoRC3 from…

Pobrania
358
Polubienia
103
Ocena
0
P
Printablesarroyobass

Miter Saw T-Track Stop Block

This is a stop block that works great for standard size t-track! Currently a work in progress, but I am happy with it so far! I designed this to work with Powertec or Rockler t-track, but it should work with most standard size t track.…

Pobrania
356
Polubienia
95
Ocena
5
P
Printablesjokuvaan223

Magpul AR PMAG 10 -> 2 round limiter

Limits magpul pmag 10 to 2 rounds

Pobrania
351
Polubienia
32
Ocena
5
P
Printablescrieke

Miter Box / Gehrungslade

This is a simple miter box. The Fusion 360 project files can easily be adjusted by editing the parameters (Modify → Change Parameters). You can adjust the following parameters: Cut_Angle Inner_Width Wall_Height Wall_Thickness Extra_Block…

Pobrania
347
Polubienia
22
Ocena
5
P
PrintablesSteffen

Metabo TS 254 Miter bar

Miter bar for Metabo TS 254 table saw. Tight fit. Made room for 2 M6 bolts. Sketchup file attached.

Pobrania
338
Polubienia
25
Ocena
5
P
PrintablesJeremy

Stop block for miter saw station

Used with this t-track. Any will probably work. https://www.amazon.com/gp/product/B07FQTZQ5C Star knob makes it easy to quickly adjust. Will probably cut down the bolt for better grip.

Pobrania
337
Polubienia
120
Ocena
5
P
PrintablesChris K.

"Limited Slip" Torsen differential Type 2

UPDATE 20240422: The Housing connector are not designed well and break easily. Stand tight while I work on something better. Description: While I was looking for a solution to prevent spinning wheels for my planned RC Crawler, I wanted to…

Pobrania
330
Polubienia
58
Ocena
5
P

Metric Miter Gears 90°

Low Speed Metric Miter Gears 90°, conically shaped teeth and a 1:1 speed ratio Scale/Modify to fit your project Step file included Thanks for downloading. Please leave me a “Like” for my work. Thanks <3 Measurement Units Metric Bore Type…

Pobrania
317
Polubienia
33
Ocena
5
P
PrintablesTrev

Daggerheart - Limited edition box insert for Cards in sleves

Attached are all the files and images of the finished box insert It is tight fit between the two sections as I couldn't do dividing walls for the cards and I had planned to slip a thin piece of plastic or paper even just to help with the…

Pobrania
315
Polubienia
21
Ocena
4
P
PrintablesBleo3

Laundry Detergent Bottle Lever for limited hand movement.

This is a complete re-build of the laundry detergent lever by PeaRidgeHillbilly. I think that the little button on the top of the laundry jugs spouts are hard to push, and this idea was great. Many have arthritis, and find ordinary items…

Pobrania
313
Polubienia
229
Ocena
4,67
P
PrintablesDrPrintsALot

Table saw/Miter saw compact workbench

Inspired by many similar benches from many different people. Uploaded because someone requested I do so… so the model is a little rough but should get you most of the way there. Designed for Dewalt 8 ¼" table saw (DW7485) and Kobalt 7 ¼"…

Pobrania
312
Polubienia
54
Ocena
0
P
PrintablesJalu

Nozzle/Düse Bosch Unlimited Series 7 Vacuum Cleaner

Standard and long 240mm attachment nozzle for Bosch Unlimited Series 7 vacuum cleaner. --- Standard und lange 240mm Aufsteckdüse für Bosch Unlimited Series 7 Staubsauger.

Pobrania
312
Polubienia
44
Ocena
5
P
PrintablesBaloonMan

Animal Company Dynamite

Ty for the tip whoever commented sorry I forgot ur user

Pobrania
311
Polubienia
14
Ocena
0