Liczymy pasujące modele…
Monitoring of PC parameters was made according to the project of Alex Gyver using a screen lsd 2004 and arduino nano v3 with usb-c port. All parts are printed without supports. I printed with a 0.6 mm nozzle, but I will add an z-code…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Radon is a chemical element; it has the symbol Rn and atomic number 86 . It is a radioactive noble gas and is colorless and odorless . Of the three naturally occurring radon isotopes, only 222Rn has a sufficiently long half-life (3.825…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Description To ensure the timely replenishment of my pet bird, Peanut’s, water supply, I devised an electronic project. Previously, I would often forget to check on Peanut due to his ability to go days without water. This project aims to…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Thanks Quinsta for the origional, I have remixed the logo as it would not print correctly.
Magnetic mount for cheap chinese thermometer. Thermometer can be installed in two ways - with magnets on bottom or top (including top of P1P/P1S). Mount under angle, so P1* LED doesn't shine too much into LCD. Works with X1C, too. Using…
This is a Remix of the VO-CH Air Monitoring Droid originally made by Bugman. This was redesigned to use the component sent in the Alien3D UFO Monthly Box. The major differences are changing the Arduino to a D1 Mini and the air sensor to a…
My BYD Shark 6 is packed with bells and whistles, and I love them all but I wish I could turn off driver monitoring and have it actually stay off! Since it doesn't, I took matters into my own hands. After taking a few measurements (and…
This is a hardware-free, fully 3D-printable radiation shield designed to protect environmental sensors (like the FS400-SHT31) from sun and rain. By shielding the sensor, it allows for more accurate ambient temperature and humidity…
Here are the files for VO-CH He is a Air Quality Monitoring Droid which keeps an eye on the VOC Levels in our maker room and turns on the Fan when appropriate (when we forget. lol) and off again when the levels are lower. to make one of…
About The espCam is an enclosure for the ESP32 CAM microcontroller. The camera is designed to be a small good looking security camera that can also be used to monitor prints. It features a ring light with diffuser that is an improvement…
Die Halterung bildet eine schöne Aufbewahrungsmöglichkeit für Kopfhörerverstärker von In-Ear Monitoring an einem Notenständer oder einem Mikrofonständer. Es gibt Varianten für 30mm Notenständer und für 20mm Mikrofonständer. Beide…
[English] I recently started using Octo-Pi to remotely monitor the printing process, and I wanted to be able to see the temperature inside the enclosure from the camera, so I rebuilt the thermo-hygrometer stand. It fits a 45mm diameter…
Position feedback in fully closed or fully open state for a sectional garage door by means of a reed contact. Stuck to loxone smart home. Reed contact width 60mm. axle screws 52mm Happy printing MFG Chris Follow me on... prusaprinters.org…
Photos: https://twitter.com/dr2mod/status/1582006871287685122 Instructions: https://github.com/dr-mod/temperature-monitoring-station
About the print This print is part of a larger project I am working on to implement Mycodo into my hydroponic garden. The goal is to have several modules that can connect independently, with ‘break out boxes ’ for different sensors,…
Recently, I setup home assistant goal of collecting data from various sensors around the house. for some reason, having Information like temperature, humidity, and Co2 levels all visually displayed on a dashboard sounded like a pretty…
Check out the GitHub project for more information. https://github.com/BrobstonCreations/delta-tango
A wall-mounting box for a Raspberry Pi Zero, a Pimoroni Enviro Plus HAT and a PMS5003 particulate matter sensor . When the HAT is directly on a Pi, the temperature sensor on the HAT is heavily interfered with by the heat given off by a Pi…
This is a minimal backplate for the popular energy monitoring module PZEM-004T. Useful if you just need a backplate for the sensor to be mounted inside a cabinet. 3MF version Use double sided tape to fix to a panel Sensor press-fits to…
This 3D printed Dual Servo Fish Feeder combines an automatic feeding system with water quality monitoring capabilities. Designed for aquarium enthusiasts who want precise control and automation, this system uses two servos to deliver…
Both models were made with slots to insert magnets for a easier deployment, making it also possible to retrieve the magnets if the print doesn't turn out so well. The size of the inserted magnets is 20 * 10 * 3 mm and they can be found in…
A quick little case to hold a PSU and ESP8266 (D1 Mini) for monitoring the temperature of the hot water cylinder for my home automation system. The PSU came from BangGood:…
This was made to elevate my Wyze Cam v2 up to a level from which it could monitor my Anet a8. It was partially taken from Fallguy2006's design . So far it elevates it perfectly. Happy printing!
TL;DR Printable 8-bit ghost shaped CO2 monitoring device Changes color according to CO2 level Works with Arduino Uses Sensirion SCD4x CO2 sensor Based on ESP32-C6 (WiFi, Bluetooth, IEEE802.15.4 capable) Custom PCB All open source / open…
I built a custom enclosure for my 3D printer and wanted to monitor temperature and humidity at multiple positions inside the enclosure to better understand and optimize printing conditions for different filament types such as PLA, PETG…
This phone stand is designed specifically for horizontal (landscape) phone placement. Unlike most angled phone stands, this one keeps the phone flat and stable, making it great for using your phone as a Wi-Fi camera , 3D printer monitor ,…
OOPS! My original design was for a slightly improperly built Prusa Mini and my heat block, heat break, and nozzle all sat lower than they should have. I've redesigned the Otoscope mount part to be 2mm higher and uploaded it in a separate…
Needs a couple of M3 bolts and nuts to attach it to the existing holes on the prusa enclosure. Print on the given orientation, no supports are required.
I had an old blink camera that I wasn't using for much and decided it would work well as a monitoring camera for checking in on long prints while I'm not at home. There are a few mounts out there but I didn't want to have to screw it in…
A mount to hold PT1000 thermistor probes by Connected Automated Monitoring (CAM) formerly known as Checkit or Tutela. Three slots for attaching by zip tie or can be used with mounting tape etc depending on temperature and conditions.…
Lampička se skládá ze dvou částí. Spodek, kde je elektronika, napájecí konektor, PIR senzor. PIR je speciálně určený pro monitoring pohybů při spánku a při dobrých podmínkách i pro monitoring dechu. Elektroniku pro lampičku je možné…
This is a remix of the Air Monitoring Droid (Alien Edition) that incorporates an EDD1306 OLED display. If you have the Alien3d Box from July 2021, then that's the component used in this remix. The display shows the PPM and r0 values from…
Have you ever wanted to monitor the charge of your DJI Avata battery ? Have you ever wanted to automatically stop the charge at any percentage you want for storage ? (without letting the "smart" DJI battery to charge 100% and then to self…
This is my ambient monitoring station box for my PRUSA MK4. The project is based on the Adafruit Feather ESP32 with BME sensor (P/N 5303) that will measure the outside ambient temperature, pressure and humidity. Inside the enclosure is…
parametre de base sur votre imprimante 3D, 0.2mm, 20% de remplissage, support obligatoire, un peu plus de 2jrs d'impression pour 1 pied
Use kompas 3d v24 for edit m3d file.
The WeatherXM project is a distributed weather monitoring project that pays weather station hosts in a cryptocurrency. The monitoring unit is outside, but the M5 base station for the weather station is indoor-only. It is meant to sit on a…
About I needed to install Athom Power Monitoring Mini Relay for ESPHome, so I quickly designed one. This was designed to be screwed into the wood plank, the distance between the external holes fits into a grid 20x20mm lines, holes for 4mm…
TMEP I have installed TMEP to our local web server as a super simple frontend for monitoring. https://github.com/MultiTricker/TMEP/releases But you can also use (more polished and developed) web version at: https://tmep.cz/. This manual…
This device was developed to be attached with double side tape to the machine. For additional protection, a board cover was made to fit in the ESP32-S3 support and allow the connection with the battery and the external sensor. The code…
I wanted to track my electric usage in real-time, and I’ve already have Home Assistant as my main smart home management system, so I wanted to make use of the Energy tracking feature that it provides. Because my meter is located outside…
Features : Sampling Frequency: 250Hz Two ways to send the data: via email or directly to PC (plotter serial, or any other program as serial studio). The output can be selected in the setup menu In the email mode, after 30 seconds after…
WEMOS D1 Mini Pro holder for "Power Monitoring 3xPZEM004T DIN Rail" Category: DIY
Mit der Halterung kann ein Kopfhörerverstärker für In-Ear Monitoring an einem Klavier oder Flügel besfestigt werden. Der Kopfhörerverstärker ist damit schön aufgeräumt und hat einen festen Platz. Es gibt keine Besonderheiten für den…
FreshTrack is a simple yet highly functional accessory that promotes food safety and reduces waste in home refrigerators. The concept centers around day-of-the-week captions that clip onto refrigerator shelves, acting as a visual tracker…
Smart household appliances tend to be short-lived due to the added complexity creating more points of failure. If you must have some smartness in your appliances, it's sometimes a good idea to add it on as a separate system. This solution…
This project is a PC monitoring system with a 20x4 LCD display. The device displays the temperature and load of the processor and graphics card. Ideal for PC case modding and real-time system monitoring. Features 📊 CPU/GPU temperature and…
WEMOS D1 Mini Pro holder for "Power Monitoring 3xPZEM004T DIN Rail" Category: DIY
little camera warning, czech textation
ESP32 Controller Board for production monitoring system, Environment monitoring system, etc.... WhatsApp link: https://chat.whatsapp.com/FSirSDKs7iE1Fp4d1rhu38 you tube channel link: https://www.youtube.com/@RAJTECHTAMIL contact number:…
Wyze Cam Custom Body for 3D Print Monitoring (with F3D for customization) The Wyze Cam works great for Print Monitoring. However, I faced the following issues with the stock body: Unstable base Enclosure heats up over time It's tough to…
This is a screw down mount for the Lerdge power monitoring module with tabs to position it with the board in place. The tabs can be snapped if you do not need them at some later point. Alternatively I provided a version of the part…
A simple case for the emonTx electricity monitoring transmitter Two versions, one with screw mounting flanges, and one without Includes internal holes for screws, but fits in fine without them Should be able to print without supports…
Description: Monitor your prints effortlessly with this Raspberry Pi camera mount designed for the Prusa MK3/MK4. Mounted at the back of the printer, it provides a clear view of the print bed, making it easy to keep an eye on your prints.…
This design is intended to facilitate mounting a small USB camera (specifically a ELP-usb500w02m-l21) on a vertical surface, with a good degree of flexibility in orientation. I've specifically used this to mount one of these cameras (the…
if you trust your printer with a 100mm bridging you could use this. or just add sparce supports here and there
This custom enclosure was designed to house my thermal chamber monitoring project , built around an Arduino Nano , two MAX6675 thermocouple modules , and a 16×2 I²C LCD display . The purpose of the device is to monitor material/part…
Following parts are needed: Shelly Plus Uni Fuses: https://www.amazon.de/dp/B0854CQ28C Fuse Holder: https://www.amazon.de/dp/B0B7NDNR8Y Cable: https://www.amazon.de/dp/B088RJ74JJ Crimping pliers and Cable lugs:…
I want to monitor the onboard voltage of my camper while it is not in use, but stored in my garage. With Wifi coverage established, I can integrate this in my automation (I am using Domoticz). The project is a simple combination of…
Case for the UrbanIoT mobile environmental monitoring sensor See more information about the project here: https://www.hackster.io/philippmanstein/urbaniot-mobile-environmental-monitoring-421463
Wall mount for ParemTech PTLevel Home Receiver. Attached using 2 3M Command Strips. I designed the height to cover the status LEDs. I consider it a nuisance light :) Please Rate and share your Make! :)
Basic mount for i2c Liquid Crystal display paired with Arduino Uno form factor board (in this case R4 WiFi for fetching http data). The code for both the temperature monitoring HTTP server (basic vcgencmd measure_temp usage) and the…
We created an Arduino-based device using sensors, programming, and 3D printing to measure school environmental safety factors such as light levels and air toxicity, helping improve safety awareness.
you need to match the cover with hot air.
This is a 3D-printed enclosure for the downtime monitoring sensor module. I designed the enclosure to simplify the layout of the electronics, making it easier to mount and reducing the number of components needed for assembly. This…
This is the box ment for all the hardware kit that I've designed on my chanel, the project is ment to be a HMI for Satisfactory power grid, where you can check IRT the grid on your game. Very satisfactory indeed. Chanel:…
🇬🇧 Sulfur Dispenser for Varroa Monitoring Boards Varroa destructor is widely regarded as the number one enemy of the honey bee. This parasitic mite attaches itself to adult bees and reproduces within the brood, gradually weakening the…
Tufty 19" Rack Mount Bracket Bring your Tufty display into the data center! This project is designed to integrate a Tufty-based monitoring display directly into a standard 19-inch server rack . This 3D-printable bracket allows you to…
P-Hive Infinity Smart Monitoring Kit This project extends P-Hive's official Infinity beehive support with a printable upgrade for hive monitoring (All parts are designed for permanent outdoor use and should be 3D printed in light color…
Radon is a chemical element; it has the symbol Rn and atomic number 86 . It is a radioactive noble gas and is colorless and odorless . Of the three naturally occurring radon isotopes, only 222Rn has a sufficiently long half-life (3.825…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Basic mount for i2c Liquid Crystal display paired with Arduino Uno form factor board (in this case R4 WiFi for fetching http data). The code for both the temperature monitoring HTTP server (basic vcgencmd measure_temp usage) and the…
UPDATE - 2/16/2026 - added a heavy duty clicker arm for those requiring 12+ hours of clicking per day everyday. This arm should withstand months of 12+hours of clicking every day. So far, this arm survived 9 months of 12-18 hours of…
A SolidWorks-based CAD model of a Smart Traffic Control & Monitoring System designed to simulate intelligent urban traffic management infrastructure. The model features modular traffic signal units, integrated sensor housings,…
UPDATE - 2/16/2026 - added a heavy duty clicker arm for those requiring 12+ hours of clicking per day everyday. This arm should withstand months of 12+hours of clicking every day. So far, this arm survived 9 months of 12-18 hours of…
