Wyniki wyszukiwania: neat

Sortowanie

148 modeli

P
PrintablesTony Borisov™

The best hack for your sneakers / Make your shoes look neat

If you have sneakers like mine, the 3.4mm hole would best fit you. If not explore the rest of the models. The model is tested and I didn't have to readjust my laces for 1 week, despite of running, walking and other sports. Let's see if I…

Pobrania
742
Polubienia
407
Ocena
4,88
P
Printables3D KIMBA

MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free

MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free September 29, 2024 Update: Added Cable Organizer compatible with thicker 4,5mm diameter braided cable. Product Description: The MacBook Pro cable organizer clip is a…

Pobrania
487
Polubienia
74
Ocena
4,67
P
PrintablesPmoelans

Neato Botvac dustbin clamp

After a few years of use the dustbin was not latching to the vacuum cleaner and this rendered the vacuum cleaner useless( sensor detects whether the dustbin is properly closed). At first glance the part could be glued, but this was only a…

Pobrania
175
Polubienia
12
Ocena
5
P
PrintablesFred

Neato Botvac Drive Brush Gear

I modeled this to replace the worn out hexagon portion of the Neato Botvac that seems to tear up on every vacuum. I printed mine no supports, but on a raft just to make sure the gear teeth came out clean. I have about 6 months of runtime…

Pobrania
149
Polubienia
14
Ocena
5
P
Printablesmscalora

Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…

Pobrania
103
Polubienia
18
Ocena
5
P
Printablesmscalora

Super Deluxe Paracord Melting (Whipping) Form - Melt neat and clean ends on paracord

This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…

Pobrania
95
Polubienia
30
Ocena
5
P
Printablesmagnussommarsjo

Neato Botvac Intake

Description Neato Intake and dustbin holder spare part. Made this from measurements of original part. Some differences exists but its mostly the same. Print instructions I printed this in PETG Prusament and have not had issues (yet) with…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesXoggy

Neato Botvac Filter remover

This is just a small leaver to help pop-out the filter in the dust bin. Hope you like it! Print instructions Prints well in both PLA anf PETG

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesINeedOneDesigns

Travel Soap Dish, Neat and Compact when traveling and Using (Single colour version also included)

This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…

Pobrania
2476
Polubienia
597
Ocena
4,83
P
PrintablesEon3D

Subby – The Cutest Submarine Beneath the Waves

Say hi to Subby, the cheerful little submarine built for deep-sea fun and desktop charm! With its round shape, chubby fins, and curly periscope, Subby brings bubbly energy wherever it goes. Whether you're into ocean vibes or just love…

Pobrania
565
Polubienia
42
Ocena
4,25
P
PrintablesBasementLAB

Orthodontic aligners removal tool - Remover per allineatori ortodontici

Orthodontic aligners removal tool - Remover per allineatori ortodontici Now available in an enhanced ergonomic design for greater comfort and ease of use. New & Improved: Redesigned for better grip, smoother edges, and effortless aligner…

Pobrania
477
Polubienia
47
Ocena
5
P
PrintablesMehdals

MANEATER PLANT 28MM CREATURE FOR TABLETOP ADVENTURES

Man Eater Plant on a 50mm Base with leaves that hang over. Great for any garden you want to keep those pesky adventurers out of. Includes 3 poses all with and without bases

Pobrania
455
Polubienia
118
Ocena
1
P
PrintablesScatterthought

Dupray Neat Steam Cleaner Caddy & Cap Grip

The Neat Dupray steam cleaner: great for cleaning, cute design, total usability fail. So, let's trade some form for function. My Neat caddy does five things: Keeps the carrying handle from retracting into the body and sitting on top of…

Pobrania
416
Polubienia
29
Ocena
5
P
PrintablesBruno Porto

BFPTouch - Poor's man BLtouch. A simple, cheap, neat, precise, compact and reliable any surface Z Proble for bed leveling.

Background I was using an inductive sensor as my main Z_min sensor. I was unable to use it as bed leveling sensor because I was using a very thin and soft steel plate under the glass. This lead to several issues: the glass itself is not…

Pobrania
298
Polubienia
40
Ocena
5
P
PrintablesLa Cave Au Chat

Guide clip to hold neatly two 4mm PTFE tubes together

Français en dessous :) __________________________________________ With this quick and easy to print part you can neatly route two 4mm PTFE tubes together. Very practical and easy to use. Gives a very nice look with our filament dryer and…

Pobrania
246
Polubienia
17
Ocena
0
P
PrintablesMehdals

MANEATER PLANT 50MM LARGE CREATURE FOR TABLETOP ADVENTURES

4 Headed Man Eater Plant on a 50mm Base with leaves that hang over. Great for any garden you want to keep those pesky adventurers out of.

Pobrania
221
Polubienia
61
Ocena
0
P
PrintablesVoyajer

Neato Botvac D series Belt gear drive

Update: I've added a version that includes grease channels to help retain more grease. This drive gear replacement for the Neato Botvac D7 is bolstered to ensure it is strong enough to withstand the forces the beaterbrush gives it. The…

Pobrania
188
Polubienia
21
Ocena
4
P
Printablesabruski

Cable management bracket for underneath the table

Cable management bracket for under the table

Pobrania
181
Polubienia
27
Ocena
5
P
PrintablesTol

XL6009E1 step up converter with voltmeter – neat case / enclosure

These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…

Pobrania
167
Polubienia
17
Ocena
4
P
Printablesso_much_mirrors

Hairdryer neater set

Somewhere in the abbyss of 2020, my OCD no longer coped with the hair dryer and the hair-curler (I'm not sure how the thing is called) lying on the flat surface. In the quest to arrange and organize everything, several versions of wall…

Pobrania
159
Polubienia
21
Ocena
5
P
PrintablesLuke Earl

Airtag Mount (Underneath Seat) (Customizable)

A mostly hidden, compact way to store an Airtag on a bike. Designed for a mountain bike using a WTB Volt saddle, however this should fit other seats as well. Most seats have the same sized rails, with the only difference being the angle…

Pobrania
145
Polubienia
29
Ocena
4
P
PrintablesTilbert

Simple checkers with neat storage box for 8x8 board

Simple and easy to print checkers for 8x8 boards. American, Russian, EU style as well. Box with the lid provided. No support needed. 35 mm in diameter but you could scale them (don't forget the box:-) for your board. You need to print 12…

Pobrania
144
Polubienia
17
Ocena
0
P
PrintablesKatie

Anti-Tangle Spool Tags - Tangle Free: Keep spools neatly wound and know the filament type at the same time.

These are very simple spool tags. They have only two jobs: Stop the filament tangling while in storage Make it easy to see the filament type Vacuum bag safe There are tags for most filaments, with GF, CF, etc. While the letters do NOT…

Pobrania
140
Polubienia
23
Ocena
5
P
Printablesjason smith

Cable Trunking conduit cover cables neat. Easily editable. Best i could make for performance. check it out

cable trunking (prints without supports) honestly the best i could make. edit easily even with tinkercad for beginners. just make the walls 1.5mm and base 1mm is enough. I printed on Bambu P1s in Petg as pla is not good for useful items…

Pobrania
136
Polubienia
6
Ocena
5
P
PrintablesLinuTec

Bruder Absperrzeug Leitbake / Brother barrier equipment delineator

Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5

Pobrania
134
Polubienia
30
Ocena
0
P
PrintablesTol

LM2596 / LM2596S step-down converter with voltmeter – neat case / enclosure

These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…

Pobrania
134
Polubienia
26
Ocena
4,4
P
Printablesheyiboy

Robot Vacuum Toy - Neato Mini

My kid is super into Roomba and generally into all sorts of robot vacuums. There aren't many toys out there for him so I made him a little Neato inspired one. Print it at 50mm for a good pocketable size. Print at 200mm for a huge toy. Let…

Pobrania
129
Polubienia
9
Ocena
0
P
PrintablesDavid

CW1 - storage underneath & printable funnel

The tray (podstavec) gives your CW1 the same height as an SL1. Oh god! How this has always bothered my OCD! you can store mess in it. Spatulas, gloves, the funnel etc. you can either put the PSU inside or attach it onto the back side of…

Pobrania
121
Polubienia
28
Ocena
5
P
PrintablesNickolas Butler

Neat Little Spoon

It's a little spoon

Pobrania
120
Polubienia
5
Ocena
0
P
PrintablesARGO Workshop

Booster Feet for IKEA TROTTEN Table Legs, to make IKEA ALEX Drawer fit underneath it.

I bought some IKEA TROTTEN Desks and some ALEX 36x70cm Drawer Elements thinking they would fit together, but it turns out there is about 2cm difference between the bottom steel element of the Desk and the top surface of the drawers. So i…

Pobrania
114
Polubienia
5
Ocena
0
P
Printablesmadeinoz

Neato XV11 LIDAR Controller + Stand

The LIDAR unit salvaged from a Neato XV11 Robotic Vacuum Cleaner is a cheap LIDAR for robotics that reports accurate range information up to 3-5M in a continuous 360 Degree scan. This is a stand to suit the XV11 Lidar and has primarily…

Pobrania
101
Polubienia
6
Ocena
0
P
Printablesmnemic

Raspberry Pi 5 case - Pimoroni NVMe hat underneath

A remix of the Raspberry Pi 5 case, to support a Pimoroni NVMe hat mounted to the underside of the board.

Pobrania
99
Polubienia
14
Ocena
5
P
PrintablesTimid Possum

Dog Sleeping Beneath Bed Figure - LED Illuminated

This is just a simple model of a bed with a sleeping dog lying beneath it I made for fun. There is a space for a 3mm or 5mm LED with a channel for the wires which exit behind the headboard to connect to power. I am wiring a switch with…

Pobrania
99
Polubienia
4
Ocena
0
P
PrintablesHHV

Large Paper Towel Underneath Holder

I decided to create a Paper Towel Holder because the are a huge rolls that I like but no commercial holder that will fit this thick paper towel rolls Underneath. It will fit cylinders of paper of 180mm of diameter without problem. I use a…

Pobrania
88
Polubienia
24
Ocena
0

Cable Holder Set for 1 m, 2 m & 3 m Cables – Compact Organizer for Neat Cable Storage

Keep your cables neat and organized with this practical cable holder set, available in three different sizes for 1 meter, 2 meter, and 3 meter cables. Each variant is designed to provide the right amount of storage space for its…

Pobrania
86
Polubienia
14
Ocena
0
P
PrintablesBasementLAB

Orthodontic aligners removal tool - KIDS LINE- Remover per allineatori ortodontici

Orthodontic aligners removal tool - KIDS LINE Key Features: New & Improved: Redesigned for better grip, smoother edges, and effortless aligner removal. For continuous use, it is preferable to use an antibacterial filament. For single-use…

Pobrania
81
Polubienia
10
Ocena
0

LowRider 3 CNC Drag Chain Shield (protection from vac hose getting tangled underneath drag chain) v2.0.1

If your LowRider 3 CNC takes the normal approach, with a vac hose from below hanging on hose hangers, this listing has nothing for you. If like me, your LowRider 3 CNC has a vac hose from above, and uses a drag chain, then you might find…

Pobrania
67
Polubienia
15
Ocena
0
P
PrintablesWeekdayWeekend

LP RECORD ALBUM CLIP - Keep Your Vinyl Record Albums Neater!

WHAT IS IT? This is a small slip-on ‘clip’ for your record albums. When stored vertically (which is the ideal way to store records), the cardboard sleeves of each album tend to bend outward, looking very bulbous and untidy. This little…

Pobrania
62
Polubienia
8
Ocena
4
P
PrintablesLordDerps

Extension for the NeaterFeeder Express

NeaterFeeder Express was too short for my dog, but the company only makes an extension for the more expensive NeaterFeeder ($80 + the extension), so I quickly threw this together in TinkerCAD to raise it approximately 6 inches off the…

Pobrania
61
Polubienia
5
Ocena
0
P
PrintablesRainbowstrikes

USB Endoscope neat storage solution

No supports needed, the screw might need some moving around to achieve smooth motion. Link to the endoscope used (pick the soft 1m cable option)

Pobrania
58
Polubienia
16
Ocena
0
P
Printablesmaxelman

Single Pen Tray - Studio Neat Style (Parametric)

Lots of parameters to adjust in OpenSCAD. I've included my favorite option Also see the two pen version here: https://www.printables.com/model/1043555-dual-pen-tray-studio-neat-style-parametric

Pobrania
57
Polubienia
9
Ocena
0
P
PrintablesZuzu3D

Echoes Beneath the Skin

Echoes Beneath the Skin — a powerful 3D sculpture exploring the emotions, voices, and hidden struggles that exist beneath the surface. A striking artistic piece created with high detail and designed for 3D printing. Available as a premium…

Pobrania
57
Polubienia
10
Ocena
0
P
Printablesomgwtflolbbq

Gerber Neat Freak Scissor Sheath

I created a sheath to hold the Gerber Neat Freak scissors. Normally these are used for fishing, but they're well designed and can be used for much more. A family member of mine has arthritis and I wanted to ensure they had sufficient grip…

Pobrania
56
Polubienia
7
Ocena
0
P
PrintablesTimid Possum

Dog Sleeping Beneath Bed Figure - LED Illuminated

This is just a simple model of a bed with a sleeping dog lying beneath it I made for fun. There is a space for a 3mm or 5mm LED with a channel for the wires which exit behind the headboard to connect to power. I am wiring a switch with…

Pobrania
56
Polubienia
1
Ocena
0
P
Printables-Nerf-Herder-

Filament Holder - Holds from underneath

Designed a filament holder that hangs underneath my shelving for a snag free print Category: 3D Printer Accessories

Pobrania
55
Polubienia
5
Ocena
5
P
PrintablesJeryoart

“Wolves Beneath the Lunar Crown”

Design Concept The 'Wolves Beneath the Lunar Crown' is crafted to capture the ethereal and mystical essence of wolves in nature, blended with fantastical elements like the lunar crown above them. The symmetrical alignment is a design…

Pobrania
54
Polubienia
14
Ocena
0
P
Printablesmaxelman

Dual Pen Tray - Studio Neat Style (Parametric)

Lots of parameters to adjust in OpenSCAD. I've included my favorite two options Also see the one pen version here: https://www.printables.com/model/1061699-single-pen-tray-studio-neat-style-parametric

Pobrania
50
Polubienia
9
Ocena
0
P
PrintablesAmaury

Roulette brush robot vacuum cleaner Neato - Roulette brosse aspirateur robot Neato

Français : Roulette de brosse pour aspirateur robot Neato. Imprimer en TPU pour réduire le bruit ou en Nylon pour réduire le bruit et augmenté la résistance, sinon du PLA, PETG ou ABS font très bien l'affaire (Eviter les filament enrichie…

Pobrania
50
Polubienia
7
Ocena
0
P
PrintablesMrRed2k

Conduit holder for 20mm PVC Pipe with place for 8mm cable underneath

Made this Holder for 20mm pvc pipe to fix to the wall. The added strap (for visuals mostly) is clipped in place after the install. Dont break it of its quite fragile. The spot below is for a 8mm cable or tube. I fitted this to get a gas…

Pobrania
49
Polubienia
12
Ocena
0
P
PrintablesSnowHead

Tires for xecutors Neato-Wheels

When printing the rims by xecutor why not print the tires too? Because my VR100 has lost a lot of his tires profile and got more and more problems on carpets and door sills I designed at first a tire with a profile similar to the original…

Pobrania
48
Polubienia
8
Ocena
0
P
Printablesjk_printer

"Rug saver" brushes for Tesvor M1 / X500 robot vacuums (compatible to Mamibot, Neatsvor)

Modified brushes for Tesvor vacuums, which prevent the robot from curling up light weight rugs and carpets. The original brushes on Tesvor vacuums like the M1 or X500 are using bend down brush bundles, which cause the robot to sweep under…

Pobrania
48
Polubienia
21
Ocena
0
P
PrintablesChris Hill

Slotted rails to store steel sheets underneath Original Prusa Enclosure

Introduction This is an OpenSCAD script to generate slotted rails to hold steel print sheets underneath the Original Prusa Enclosure. The rails mount to the underside of the enclosure, using existing tapped holes in the base. The pattern…

Pobrania
47
Polubienia
14
Ocena
4,5
P
PrintablesAmaury

Neato robot vacuum cleaner rear castor - Roulette arrière aspirateur robot Neato

Français : Roulette arrière pour aspirateur robot Neato. Imprimer en TPU pour réduire le bruit ou en Nylon pour réduire le bruit et augmenté la résistance, sinon du PLA, PETG ou ABS font très bien l'affaire (Eviter les filament enrichie…

Pobrania
43
Polubienia
7
Ocena
5
P
PrintablesSnowHead

Soft Replacement/Upgrade Rear Wheels for Neato XV and Vorwerk VR100/VR200 Series

Because the original rear wheels of Neato and VR100 are very hard they make a big noise on tiled floor crossing the gaps between the tiles. If you print the attached file with white TPE and replace the hard wheels with the new ones, you…

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesPixel Vengeur

Neat King Bee microphone - Shock absorber replacement clip

After the injection moulded ABS clip broke at the screw junction on my shock absorber, I decided that it would be an easy piece to replicate. As a drop-in replacement, the piece reuses the same screws and friction pads. .3MF for printing,…

Pobrania
38
Polubienia
1
Ocena
0
P
Printablesblazer-snorky

Raised replacement feet for Philips TV - fit your soundbar underneath

These raised, replacement TV feet provide some extra clearance under your Philips TV. They lift your TV high enough to place a soundbar under the TV, instead of in front of it. It saves some space and makes your setup look clean and…

Pobrania
38
Polubienia
4
Ocena
5
P
Printablesbabalunda

Neat Organizer for Craft Buddy pearls

A rectangular tray with 15 evenly spaced square compartments. The tray is designed for organizing or storing small items and is crafted for a clean and minimalistic look. It measures 12 x 7 cm and comes with a matching lid (not shown in…

Pobrania
37
Polubienia
12
Ocena
0
P
PrintablesMatthew Klanfer

Striped Eel Catfish (Plotosus lineatus)

⚠ Warning: When removing supports after printing, be extremely gentle — the whiskers of the Plotosus lineatus can break easily. Use tools, not your fingers 🛠 Plotosus lineatus , the striped eel catfish, is a small Indo-Pacific species…

Pobrania
37
Polubienia
10
Ocena
0
P
PrintablesJan

Neato D7 ESP32 mod mount

Since Neato servers are off, you can use your robot vacum only by using a physical buton and it's functionality is limited. Then this Neato Brainslug mod comes to the rescue (big thanks for the creator, you did great work!):…

Pobrania
37
Polubienia
3
Ocena
0

Bitty Pop (Funko Pop) stackable magnetic Shelf/Stand for 4 Mineatures // No falling out

This little stand is made for 4 bitty pop figurines. It is designed for those to not fall out. Magnetic Version: 6x2mm magnets are required. Fit perfectly.

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesW5AUG

Whiskey / Whisky Neat Sign

Simple small sign for your Mancave or Sheshed. You can orient and resize as you see fit. Color changes from white/brown/black to recreate the sign as shown. Standard profile setting for .2 layer height no supports.

Pobrania
37
Polubienia
8
Ocena
0
P
PrintablesSebastian

Travel Soap Dish, Neat and Compact when traveling and Using - Single color parametric

My wife really liked the travel soap dish, but it was too large for her soap. So I reconstructed it using FreeCAD and made it parametric. I included the file, so you can configure your dish on your own. If you have questions don't…

Pobrania
36
Polubienia
9
Ocena
5
P
PrintablesSnowHead

Redesigned Covered Neato Dirtbin - XV, Signature, Kobold VR100

The dirtbin by LazyOdin fits perfect in my VR100 robot but looks a bit strange. That's why I added a lid to cover the whole bin bay. Like the source by LazyOdin it also uses the roomba 880/900 dirt bin filter. Edit: After four months of…

Pobrania
33
Polubienia
6
Ocena
5
P
PrintablesVincentM

Airtag Mount (Underneath Seat) angle 28 degrees

I had printed Luke Earl's airtag mount for my CUBE sadly it didn't fit my saddle, I simply used the .f3d file to replace the original 40 degree angle with a 28 degree angle. For more strength and a better resistance I printed it in ASA…

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesCrazytiti

Neato Botvac Lidar Pulley (no support)

It's a remix of the original with no support needed. https://www.tinkercad.com/things/fxlI4BvneEF/ Category: Household Supplies

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesMaRo

IKEA Dirigera Hub Underneath Furniture Mount

it has 3 holes for screws you can slide the hub in afterwards

Pobrania
32
Polubienia
0
Ocena
0
P
Printableskermityfrog

Neato Botvac Connected Dirt Bin Latch

This latch solves the issue by forcing the lid shut. Put a tape on top of the flat surface if it is not tight enough.

Pobrania
32
Polubienia
0
Ocena
5
P
PrintablesRogueCmdr3D

Neat Weave Basket

Follow me on Twitter ( @RogueCmdr3D ) for updates on new designs, exclusive premium models, and discounts! Find my high-quality designs on Cults3D and Creality Cloud , with premium options and more. Don't miss out on what's coming next!…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesGizmo Goody

Parametric Neato D7 ESP32 Board Mount

Motivation I wanted to securely mount my Seeed Studio XIAO ESP32C3 to my Neato D7 so I could install OpenNeato and route the UART Dupont cables cleanly without interference. Solution Design and print a custom mount that achieves the…

Pobrania
29
Polubienia
5
Ocena
5
P
PrintablesJohn

Neato botvac 70e 75 80 85 D75 D80 D85 D7 D5 D3 dust filter

I really liked the original, there were only 2 things I changed: I turned the designs 180 degrees so it's much easier to print The squares with rounded corners do look really nice, but my printer was not happy with it. So I made the holes…

Pobrania
28
Polubienia
8
Ocena
5
P
PrintablesSnowHead

Tires for Neato wheels for high pile carpet

On carpets with higher pile the stock wheels and also the other tires I designed have not enough grip and causing wheelspin so. So I designed a special profile for this carpet which will have much more grip there than the other profiles.…

Pobrania
24
Polubienia
6
Ocena
0
P
PrintablesJens83

vacuum robot Vorwerk kobold VR200 / Neato turret extension

A vacuum robot is a great thing and ours is so flat, it can even go under the couch. Unfortunately it won't find its way out and will get stuck, so I had to design an extension to the turret, so the safety switch will tell it to turn…

Pobrania
23
Polubienia
2
Ocena
5
P
PrintablesBen Shepperson

Magnetic foot for mounting underneath the baseplate of the Prusa enclosure

I noticed that there was some wobble on the base plate of the Prusa enclosure when it was printing. I modified one of the stock feet so that it was slightly taller and so that a magnet could be installed. I then placed it under the plate,…

Pobrania
23
Polubienia
10
Ocena
0

block to hold scissors neatly and safely

i made this for my schools art arear to hold the scisors. i wanted to make a basic nice easy design

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesTimpanini

Gridfinity baseplatefor cabels underneath

Its a raised version for runing cables underneath, ill make more sizes uppon request.

Pobrania
23
Polubienia
15
Ocena
0
P
Printablesherbert_la

Adapter from filter for Neato Botvac D-1 ... 10 and more to vacuum cleaner

During operation of the botvac, dust accumulates in the filter and ultimately blocks the air flow. The filter is waste and must be replaced. Using the adapter and a hoover, the dust can be sucked out of the filter, thus extending its…

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesSnowHead

For Vorwerk VR100 modified Neato XV Series Replacement/Upgrade wheel

Because xecutor was so kind to attach his OpenScad-File of his wheel I was able to modify this wheel (even if I'm not so familiar with OpenScad). It now can be mounted on Vorwerks VR100 in the same direction like the original wheel,…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesEC

Dune Imperium Combat Marker (compact with +20 underneath)

A remix of Ian’s Dune: Imperium Combat Marker with a more compact profile and reduced Z-axis height. I also added a “+20

Pobrania
22
Polubienia
4
Ocena
5
P
Printablesnathan fornelli

Neat Coin

Have you ever wanted to celebrate someones humble brag with an award? Or sincerely congratulate someones success? Introducing the new, ultra versatile… Neat Coin! Neat Coins carrying case holds up to ten Neat Coins! Enjoy!

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesInspector5

Neato Vacuum Dirt Bin Latch

Our Neato VX Signature Pro vacuum occasionally hits a floor transition (or kid toy) hard enough that the dirt bin pops out. It would then sit and do nothing until someone pushed the bin back in. 3D printing to the rescue!! This little…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesPC-Tech

Neato D4 Latch Fix

My Neato D4 Latch broke, and I'm not paying $25 for a part that's designed to fail. So I made this quickly in Fusion 360. I used an M3x4mm heat insert and a small m3 screw. I used superglue to attach it to the vacuum. The heat insert I…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesSnowHead

Replacement Side Brush Belt for VR100 and Neato

The stock side brush belt of the VR100 and Neato vacuum cleaner robots tears off after about two years. This part can replace the defective belt. Printed with printable rubber the belt will never rip again. Print Settings Printer Brand:…

Pobrania
19
Polubienia
2
Ocena
0
P
Printablessgresty

Motor Holder With Rods Underneath

Motor Holder With Rods Underneath

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesGeneralDefyre

Studio Neat - Mark One Pen - Desktop Holder/Tray

UPDATE: v2 has been lengthened to fix the pen's fitment into the stand! Yay! My first ever attempt at 3d modelling since high school! :D So I backed a Kickstarter by Studio Neat for their Mark One pen. (Link to their site:…

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesSchaffer.la

Neato Vacuum bin switch spacer

Printed in PLA 0.15mm with brim

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesShydCustoms

Neat Stantia (Laptop & Tablet stand)

Neat Stantia is a laptop and tablet stand for keeping your desk organized. It features a pen/pencil holder for loose stationeries. In the picture, it can fit Aspire lite 15 and a Samsung Galaxy S7 FE tablet.

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesIr27
Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesAmaury

Neato robot vacuum cleaner filter clamp - Pince filtre robot aspirateur Neato

Français : C'est pince permettant de refermer les filtre des aspirateur Neato après nettoyage. En décollant le grillage pré-filtrant, on peut nettoyer le filtre papier correctement ce qui permet d'allonger sa duré de vie. English : It is…

Pobrania
16
Polubienia
2
Ocena
0
P
Printablesjeloneal

Vorwerk VR100 / Neato VX - Dustbin Handle

I got an used VR100 as spare parts donor that was completely intact apart from a broken display and a the missing green handle that you need to lift the dustbin. So I re-created that little piece to complement the dustbin. Update: added a…

Pobrania
14
Polubienia
2
Ocena
0
P
Printablesb--rian

Laptop-holder parts for underneath an IKEA STORÅ bunk bed

To fix a portable monitor of 12mm thickness underneath a bunk bed, I designed a holder that can be clipped onto the wooden boards holding the mattress. Required materials You need 4 printed clips 2 timber rods with a 12mm x 12mm square…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesDINO5s6

Neat vase

Small vase for flowers

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesStonXX

Riegel für Staubbehälter Neato XV

Riegel für den Neato XV Staubbehälter. Bei unserem "R2D2" ist beim überqueren von Hindernissen in der letzten Zeit immer wieder mal der Staubbehälter herausgesprungen. Das mag der Kleine leider gar nicht und stoppt sofort. Das…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesSnowHead

Main Brush Motor Protector for Kobold VR100 and Neato XV

Of course, cats are cute. But two of them with much, much fur killed my vacuum cleaner robot meanwhile three times. There is a constructive issue on the main brush motor. There is a wide gap between the motors case and the output drive…

Pobrania
13
Polubienia
2
Ocena
0
P
Printablesericgus

Uplift tube adapter for AQUANEAT 60 Aquarium Powerhead

This is a simple adapter to allow the AQUANEAT 60 gph powerhead to work with a standard 1" under gravel filter plate uplift tube .. https://www.amazon.com/gp/product/B07BQTQLTD/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s01?ie=UTF8&psc=1 Print…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesCalvin Sze

NEAT - Soap Dish

The model fits a 10cm x 10cm hotbed but will only be marginally enough to support a soap bar. Re-scale to suit your needs. The dual-color pair of models are for a double-nozzle 3D printer. Designed in Hong Kong. Category: Bathroom

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesPeter

Studio Neat Cosmonaut Case and Cap

Studio Neat Cosmonaut Case and Cap that replicates cardboard one it came with giving it a similar "pop" as you lift off the cap for the Cosmonaut Stylus. There are two versions of the body aka case, there's one with grips and one without.…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesDeepestDark1

Neato Botvac D10 (Second Revision)

This is a model I created many years ago. a few weeks ago, I decided to start revising the model into something new. this is the second revision of the model (first one on my profile) and it turned out greater than i expected. and the…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesRyan

Neato XV Series Drive Axle

This axle is used on the drive wheels for an XV series robotic Vacuum and attaches the wheel to the drive assembly. You will need to find a small sheet metal screw and washer along with this to fully attach the wheel to the drive…

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesPnoreck

MacBook Power Supply Case — Safe, Neat, and Travel-Ready

Tired of your MacBook's power supply bouncing around in your backpack or getting scratched by other gear? This custom-designed round case keeps your charger snug, secure, and perfectly organized on the go. The inner cavity is precisely…

Pobrania
11
Polubienia
0
Ocena
0