Liczymy pasujące modele…
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…
Wydruk około 5,80 €–7,09 € nettoWstępna wycena jednego wariantu
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A few of the eye designs found in the Naruto series. Print instructions Switch from red to black at 1.7mm. Glue a small 7mm magnet on the back side to complete.
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
11-30-2022 Update - See the New Version of the GSTP (Gameboard Segment Test Print). New STLs and a pre-sliced file have been included Update: Added a photo to show the size of the gameboard - it includes the industry standard “Toaster…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Hey there! I’m a big fan of David’s side storage solution for the CORE ONE. But if you’re like me and just need the tool holder or don’t want to waste time searching for the perfect magnets online, this is a simple solution that uses…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Netsuke : Where the Wild Things Jar
Wydruk około 12,28 €–15,01 € nettoWstępna wycena jednego wariantu
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Schonbacken mit verdeckten Magneten und Prismen für einen Schraubstock mit 80mm Backenbreite. Die Magneten sind Neodymmagneten mit 6mm Durchmesser und 2mm Dicke. Zum Einlegen der Magneten ist im G-Code ein Druckstopp vorhanden. Achtung:…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnets in the shape of the iconic horseshoe magnet. Neodymium magnets are inserted during the print. I have two versions here, one for Diam.6mm x Height 8mm magnets, the other for Diam.5mm x Height 2mm. The 3mf files are all set with the…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Simple remix to include two spots on the back for 2 6x3mm magnets for easily attaching to things.
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
With Mac OS Ventura and iOS 16 now released, one can now use your iPhone as a far superior web cam for your MacBook. I challenged myself to design and print an iPhone adapter instead of ordering the Belkin adapter. Did some research,…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Hello. I give you the last bottle opener you will need. This design incorporates an internal cavity that you can place five 10x2mm round magnets in, or a 10x10 round magnet. I have provided a print file that has the print pause already…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This is a remix of Prusa Core One Side Storage by Swing King Design They mentioned that it may be helpful to increase the magnet size, and I had 8x3mm ones handy. This works perfectly for my needs, thought I'd share it with others. I…
Wydruk około 9,10 €–11,12 € nettoWstępna wycena jednego wariantu
Core One Purge Bin with Nozzle Wiper Clearance Remix - 6x2MM Embedded Magnets. No glue needed due to layer pause.
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Some Notes: Printed 1,5 years ago, used support material, likely unnecessary. Printing is super easy, 15% infill. Warmed metal at folds with a hairdryer for 3D model fit (see last picture). When nailing to the wall, use a level for…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
The Bakugan Attributes are representative of the Bakugan's elements. These have internal slots for 6x3mm magnets. Use your slicers multimaterial painting bucket fill function to add color. Included FreeCAD file includes all of the…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
Changed length and magnet pockets size. 6x3mm round magnets are required for this version. Three for each tray.
Wydruk około 1,01 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gummy-Head : Netsuke.
Wydruk około 8,96 €–10,96 € nettoWstępna wycena jednego wariantu
This model is the first version. See improved version here: https://www.printables.com/model/421859-magnetic-frosthavengloomhaven-standees-second-edit Second edition features HP counter from both sides and other improvements - see the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Wolf Netsuke Minneapolis institute of art.
Wydruk około 7,28 €–8,89 € nettoWstępna wycena jednego wariantu
A Version of the Sonos Active Case ( https://www.thingiverse.com/thing:4858266 ) with a space to insert MagSafe Magnets during the print. This then allows the Apple MagSafe charger to align and attach to the case to charge the Sonos Roam.…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I don't own the game myself, but a friend of mine told me that the box needs a bit more headroom if you sleeve the cards. Since the model of @LambertW_371596 is very nice and clean, I decided to remix it, only altering the height for both…
Wydruk około 1,30 €–1,58 € nettoWstępna wycena jednego wariantu
A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Two Toads on a Floating Sandle Netsuke.
Wydruk około 5,56 €–6,80 € nettoWstępna wycena jednego wariantu
I printed in PLA 0.3 draft layer height with brims. I had to clean up magnet holes a bit before magnets fit snugly in. There was a bit of a gap between front and back so I used a soldering iron to further sink the magnets in place. One…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
Please like and follow and post your makes. I printed a Texas A&M magnet from another user and I was not able to use it with only two magnet holes the print was too heavy to hold. I decided to make my own design with available artwork…
Wydruk około 3,23 €–3,95 € nettoWstępna wycena jednego wariantu
Just a small insert to repurpose the used 9mm luger cases as a decorative magnet. No cutting or gluing required! Only friction fitted. Print settings: Layer height doesn't really matter, and neither does nozzle size. The only requirement…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. The model was designed to be a return key holder for the 5 rooms rented by my workplace for us in a shared workplace with other companies, therefore there…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
George Clinton Netsuke : Parliament-Funkadelic This was my test. I have a much better model here. https://www.printables.com/model/954039-george-clinton-parliament-funckadelic-2
Wydruk około 2,03 €–2,49 € nettoWstępna wycena jednego wariantu
This in my first print for baby activity board. It lets them connect color, shape and it snaps in place thanks to magnet. Make sure you glue down the magnets (6x2mm) so they cannot detach. Just use regular wood screws to attach it to…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Every Element as a fridge Magnet Use .15 layer height Pause at 4.25 to put in magnet change color at 7.7 This is the magnet I use.…
Wydruk około 3,75 €–4,58 € nettoWstępna wycena jednego wariantu
The G-Code file provided is only for the base of the original model with added space for the magnets. IF ANY ADDITIONAL REMAKES ARE MADE, PLEASE ATTRIBUTE THEM TO THE ORIGINAL MODEL
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
The original model had incorrectly sized holes for 6x3 magnets. This is a quick and dirty fix using negative volumes to give the correct clearance. When opening the 3mf file use the import geometry only option.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Would you like to find out which photo gets the most likes from your quests? Then print out Like Counters and hang it on your refrigerator together with photos! How-To-Print: Recommended Layer Height: 0,1mm for number wheels / 0,2mm for…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
I made the cap bigger to fit the stylus. I also added holes for magnets on one side. The printed version above (and gcode) has my intials on it, but the actual print file (stl) does not include the SMS on it. I use the stylus for my…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Remixed waste bin with enclosed magnets. NOTICE: This is just a crude modification.
Wydruk około 3,02 €–3,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Luke Skywalker on Ahch-To Netsuke. I think I went a little bit beyond old and grumpy - to just Frumpy. Ahh.. I may move his face around in the future. For now I kind of like the Frumpy. + this has me thinking of doing a few Peter Dinklage…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Holds 4-5 DVDs/CDs in each tray. Finger holes for easy extraction. Stackable. I don't retain too many DVDs these days, but this keeps them where I can find them when I need them. The DVDs fit snug enough that they shouldn't scratch each…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
Poster Holder Can be made in many ways. Standard Width Height Comment A1 840 594 Landscape mode A1 594 840 Portrait mode A2 594 420 Landscape mode A2 420 594 Portrait mode A3 420 297 Landscape mode A3 297 420 Portrait mode A4 297 210…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
This model changes the 20x6x2mm magnet slots to fit 3/4 x 1/4 x 1/8 inch magnets, such as these from TotalElement . The tolerances are a bit tight in some magnet slots, so you may need to gently tap them into place w/ a hammer. NOTE:…
Wydruk około 11,01 €–13,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of @Extrutim's excellent extruder indicator/visualizer that stays centered and uses press-fit magnets.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Guide - Magnet Cisco Icons: Accessories: Magnets are 3x3mm (3mm height x 3mm diameter). There are two versions of switches and routers, and all are provided in sets of 3. Each print has three holes on the back. If using neodymium magnets,…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
I made this Magnetic Card Case for Standard Poker/Rome Cards (90mm x 65mm). I used the “Stop during Print”-Feature to inserts the Magnets invisible. Upload diffrent Versions for 6x3 and 8x3 Magnets and with and without “stop during print”.
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
NOW with Helper Tool! Just place it on the panel, insert M3 screws and mark cut lines and drill points! Tired of reaching your hand through entire enclosure to disconnect or remove PSU for maintenance? This is for original Prusa enclosure…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Larger scale requiring a pause to insert the magnets so they are covered by a few final layers of plastic. magnet wells are 8x3mm I used 8x2 in my POC and the adhesion isnt as strong as I would like, so use 8x3 magnets if you can, or use…
Wydruk około 4,87 €–5,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I take my Nalgene Silo water bottle to work every day, and I fill it up with ice then water in the morning. Unfortunately, the 48 ounce bottle is too big to neatly fit under the 80mm diameter ice shoot, so I designed this funnel to keep…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Magnet Pole Finder was designed for Ø10 × 5 mm magnets , as this is one of the most commonly used sizes in 3D printing projects. To use it, you first need to install one magnet with the correct orientation. The polarity of this…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Customizable knobs with the name of your children. You can print them by changing color to enhance the names. In this case, I have added the code M600 to make the color change, at the height of 14.2 mm. To fix them, you can directly screw…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Since I don't own a Pinecil, but otherwise liked the Omnifixo Pinecil Case design by @PosterBored a lot, I replaced the Pinecil compartment with a generic compartment. I also had different magnets on hand (5x3 cylindrical), and I prefer…
Wydruk około 5,53 €–6,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of https://www.thingiverse.com/thing:5229866 which is also a remix of https://www.thingiverse.com/thing:4091982 . Uses 5x5x2 mm (square) neodymium magnets.
Wydruk około 5,88 €–7,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can find both lid with “CR20XX” text or version with no embossed text. Magnets used are 5x2 mm. You do not need them to glue (you can) but you can just press them in with force. 20pcs version Lid: 125,5x33,5x11,5 (mm) Base:…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Cabinet Magnet Case custom made is great to use on small spaces like kitchen cabinets or any other cabinet you might want to add a small magnetic lock! Print instructions Category: Household Summary This Cabinet Magnet Case custom…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
McGybeer's magnetic otters required a scallop shell to hold on to. So I made one using shell / Mushel as a model. This one is much smaller, 2-sided, with a cavity for a 6 mm x 3 mm magnet inside. Pause the print to add the magnet. I…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
This box gives storage for seven fully assembled Nextruders (incl. nozzle,,heat pill", thermistor, heatblock, silicone sock). I liked the idea of @dteng and modified it to my needs. I extended it to fit onto the top edge of the O riginal…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple magnet holder for my magnets. I've added numbers in slicer. It is quite big but magnets can still jump on their own XD It is 80mm wide and 85mm tall.
Wydruk około 5,46 €–6,67 € nettoWstępna wycena jednego wariantu
This is a remix of the original snap fit case bottom as well as the version of the top made for the Armor Lite V5 heatsink. This remix is based on the V3.1 case. I printed this with Sunlu transparent PLA with the 0.25mm Structural…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
This is a remix of my other model of the key holder to have 12 3x6 magnet. 4 of magnets are for holder screw and other 8 are for having the block stick to a fridge or the side of a tool box. Set Printer to pause at 3.60 to put in the…
Wydruk około 4,95 €–6,04 € nettoWstępna wycena jednego wariantu
Get no physical spam in your post box.
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
About Fridge magnets that are designed to look like the window controls inside of macOS. Includes the three different versions of the „expand“-button. Magnets The parts are designed to fit a D6x3mm magnet on the back. The magnet should…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Socket for import cabinet drawers.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Added Gcode for generic PLA and 10% infill . Letter height is 1cm and length of word social is 20cm fits Prusa mini bed ;) hand nicely on fridge or whiteboard
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
Using the same 5x5mm magnets as the original, but I wanted the magnets embedded into the print just to make sure they never accidentally fall out. The magnets have a slightly looser fit than the original so they should easily slip into…
Wydruk około 4,93 €–6,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Over Christmas break hanging out with the family, we really got into the game "L iars Dice ", so I made a nice little file cabinet for our dice, and there are magnets in the back of the drawers to keep things in place! I used 6mm x 2mm…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The same model as the original, but with a 5x2mm version instead. My modifications were all done in Prusaslicer. The 3mf file contains all my (nonsense) changes with cylinders and negative cylinders, as I don't know CAD. If it's stupid…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Remix an existing box to store the spare screws and save space. I use 10x2mm magnets. Printed with 0.2 layer height
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
You have to make a pause in your slicer where the wholes are in the holder and then you have to put the magnets inside.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
This is a 5w x5d x6h gridfinity bin that will loosely hold the Beretta PX4 storm. It also has partitions for 2 mags and a partition for little random things. This has standard magnet holes. Adding felt on the bottom is recommended. There…
Wydruk około 17,07 €–20,86 € nettoWstępna wycena jednego wariantu
True Story: Sundaymorning, way too early. Children did not want to sleep anymore. They had a loud conversation about whos turn it was to play with https://www.amazon.de/gp/product/B07S5BVHL8 So I created this here. It is a two player game…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
3 Perimeters 15% Gyroid infill 3 top- and bottom layers No support
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Fun and colorful emoticons. Use them to decorate or show someone how you feel! You'll need 6x3 magnets and a little glue
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
This is a custom "Corey♡" name tag designed specifically to mount to the top bar of the Prusa Core One (+/L). It features two built-in recesses on the back designed to fit standard 6mm x 2mm neodymium magnets for a easily removable…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Mr.Fox was tired of carrying the heavy Ikea PS cabinet and decided to fit some nice cartwheels he found at Action . The centred version has the best load distribution. Use the off-centred (left/right) version if you don't want the wheels…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad Don't you hate misplacing your individual SD cards? Now…
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…
Uploaded Version 2_3! I've made the hinges much beefier & added locking indents on the hinge so it will snap close & open! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fits standard 6.35mm or…
Who hasn't seen a print-in-place herringbone planetary gear… probably a version from Emmett . However I recently developed a different method for those gears which allows planet gears with only 3 teeth (actually also with 2 teeth, but…
Improved version of my original magnets with 5 new cats, slightly thicker (5.5mm) and embedded magnets. I provided an Orca 2.1.1 profile for the MK4 where magnets are already placed and pause & color change are setup too. All you got to…
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
Fun little Simon's cat fridge magnets. Default size vary from 80 to 100mm in heigh and 5mm in thickness. You may want to change color after the 3mm layer. Glue a magnet on the back (CA or neoprene glue). I used a single 10x2mm per item, I…
On the back there is space for a 7x2mm magnet.
I added holes for 5x2mm magnets to mount these LED bars in the AD5M and be able to easily reposition or remove them as needed. Also added a hole in the end that was filled so multiple bars could be wired together. Model has holes for 8…
this is a remix of the OneBlade travel case made by Andres. i just modified the magnet space to fit 4x3 or 4x4 magnets.
Everyone likes plants, so why not put them on your fridge? (or any metal surface). These potted succulents use a 10x3mm magnet which snuggly fit in the back but should be held in with a drop of superglue. Plants are split from the pot for…
As a fan of serial Stranger Things I designed collection of fridge magnets. All you need is magnet of this size: 5x2mm and a bit of superglue or there are types of models without holes and you can use magnetic foil. I used Prusa Printer…
Cat Paw Fridge Magnets Fidget Clicker! I use the mechanical switch and keycap to make a cute fidget clicker. And add three 6 x 3mm magnets to stick to the refrigerator ( glue needed.) You might also use springs if you don't have keycaps.…
This is a quick remix to add magnet holes to the thin base plates. I use these in my tool boxes. The magnets hold the base plate in pretty securely. This uses the same size magnets as the bins: 6mm x 2mm. Prusa slicer handles the magnet…
I made this remix of this bit holder with 6x 6x2mm magnets that is placed under the bit. Either insert a magnet under the bit and place it in the holder and press it against something hard for a friction fit or print the other version the…
Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…
For those delicious little blobs that come out of your printer! Compatible with AMS lite top mount support brackets v1 will extend to the AMS support bracket v2 will center the wall to the poop launcher v2-slim has 1.2mm walls to save…
