60 modeli
————————————————Deutsch———————————————— Universeller OpenPrintTag Halter mit selbstzentrierender Dreibacken-Mechanik (OpenPrintTag Remix) Dieses Modell ist ein Remix des "Reusable OpenPrintTag Holder" von Filamentalist und erweitert…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updates Have a look at the new slim version! Description This is a set of snap-in spool adapters designed for the OpenPrintTag . Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in…
These are dual-purpose adapter sleeves that: Allow you to use third-party filament spools in your Prusa USS Drybox without them dragging on their rim Provide a reusable carrier for mounting Prusa's OpenPrintTag NFC tags on third-party…
Description This is a set of snap-in spool adapters designed for the OpenPrintTag . These adapters are the slim version of the original model . Also, you can use this adapter to reuse the OpenPrintTag without having to worry about the…
OpenPrintSense - 3D Printed BLE Flex Sensor Glove OpenPrintSense is an open-source project that combines 3D printing, hardware, and software to create a wearable finger tracking system. The key innovation is a fully 3D-printed flex sensor…
This is a remix of the Polymaker Cardboard Spool Adapter with a larger inner ring to fit an OpenPrintTag.org NFC sticker . Additionally, an improved version that works better with Polymaker's new spool design is available. A trimmed down…
This is a simple, lightweight two-part mounting system designed to attach Prusa OpenPrintTags to any filament spool – and reuse them once the spool is empty. One part is glued directly onto the spool, while the second part holds your…
About Work In Progress - More versions incoming 2025-11-15 (ongoing) : worked on my service but also added new versions: Added Recycling Fabrik Multispool snap / insert version Added MasterspoolNut as Remix with ring support I still try…
A set for OpenPrintTag consisting of: Base for the sticker Positioning aid for sticking Set of fixing rings for the following spools: Prusament (empty weight ~200g) Esun cardboard (empty weight ~160g) PolyTerra cardboard (empty weight…
OpenPrintTags will be a success with our support! I am in the process of making reusable rings for Prusa's OpenPrintTag. Available Rings Prusament Polypaths CookieCad ProtoPasta HatchBox Overture
This is a simple baseplate onto which you can stick your OpenPrintTag. The main idea is, that you can reuse this baseplate indefinitely. If you want to use it on a different spool, simply print the matching adapter. To aid in positioning,…
OpenPrintTag adapters for various spools. Compatible with the Prusa Core One+ spool bayonet. Written in FreeCAD. Suggest printing in a material that is heat resistant such as PETG, ASA or PA etc. Otherwise if PLA then remove before…
UPDATE: New Aurapol/Spectrum Spool Design Supported! This 3D-printed ring functions as a removable platform for NFC tag stickers used in filament spool tracking and management systems. Easy transfer to a new spool thanks to the slot for…
This device is an OpenPrintTag -compatible spool scanner that reads and writes NFC filament tags, displays spool data on an LCD screen, and automatically updates remaining filament using the PrusaLink API. It exposes the spools in Home…
The new OpenPrintTag RFID tags are available for purchase. They're reusable. These are to stick to the old style Prusa Spools that don't have RFID tags, and stick the RFID tag to this disc. The idea is you can remove this disc and put it…
Retrofit your extrudr spools with this reusable ring. It sits flush on the spool and allows you to move the OpenPrintTag NFC to a new spool without damaging the sticker. Print settings: - Layers: 0.2mm - Material: PETG - Sheet: Satin -…
A reusable insert for putting an OpenPrintTag NFC tag on Cardboard Elegoo spools. Print 2 if you need it for both sides for your spool holder. Works with all the Elegoo cardboard reels I have here. Insert material doesn't matter but use…
This adapter is designed to make working with Elegoo cardboard filament spools more convenient and reusable. It combines two key features: A dedicated ring mount for the OpenPrintTag , allowing you to reuse your tag across multiple spools…
An adapter to mount your OpenPrintTag onto Prusament spools, part of a modular system for different Spools. The main idea is, that you can reuse the baseplate (with the OpenPrintTag) indefinitely. If you want to use it on a different…
You may have found a new use for that Prusament spool, but what about the OpenPrintTag MK1 still stuck to it? Peel it off and put it to work again! These OPT tag holders have an exquisite and satisfying snap-close mechanism inspired by…
This jig is specifically designed to help align Ring-PrusamentSpool-Simple or RingOnly-NoPadding (Tag). There's an inlay that fits small 3M commanders which should make adding and removing the RingOnly-NoPadding to non-prusa spools…
An adapter to mount your OpenPrintTag onto Prusament spools, part of a modular system for different Spools. The main idea is, that you can reuse the baseplate (with the OpenPrintTag) indefinitely. If you want to use it on a different…
This is a design of an OpenPrintTag system with a generic reusable tagplate and a parametric insert adapter for your filament of choice. There are already OpenPrintTag holders for several brands and types of filaments, but I wanted a…
Prusa OpenPrintTag Printable part For more check Prusa OpenPrintTag upgrade . Print instructions Download the latest PrusaSlicer and use the following settings: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on Prusament ) 15%…
This is an adapter for the OpenPrintTag Modular Spool Adapter Baseplate , designed to fit SUNLU V3 (Gen 3) filament spools. Simply press the adapter into the spool for a secure fit. No glue, screws, or additional hardware required.
My shipment of the openprinttag upgrade from Prusa did not survive and the official model is not public yet, so I have decided to re-model it and print myself. Note that this only for Core One, as the Core One L need a longer stud. Model…
Holder for Openprinttag, see also https://www.printables.com/model/1483399-openprinttag-modular-spool-adapter-baseplate
2_11_2026 Update Please note!! that this accessory is not suitable for use with the USS Drybox. If you wish to use it, you must remove the decorative ring. 30_10_2026 Update Compatibility with the Prusa injection-molded part has been…
I made a simple adapter for Open Print tags. I just attach it to the spool using small pieces of double-sided tape. This way, you can keep reattaching the tag to new spools.
See https://www.printables.com/model/1478740-openprinttag-ring-plate-wip/ This is just the Nut for https://www.printables.com/model/1127-prusament-spool-to-master-spool-adapter to support the new OpenPrintTag sticker. I don't use this…
Model of box for NFC reader that can read OpenPrintTag data. Releases 0.17.0 web application for possibility to write new data to tag. Install script for the whole bundle Note: To update a tag with new data, first go to openprinttag.org…
Reusable master spool for Polymaker refills with a flush pocket for the Prusa OpenPrintTag (NFC) on side B, a rebuilt hole pattern and separate logo inlays for multicolor printing. See "Differences from the original" above for all…
An adapter for the eSun cardboard spools that allows you to attach Prusa's OpenPrintTags to the spools. The OpenPrintTag is glued onto the adapter, the adapter is clamped in place, and once the spool is empty, it can be reused. I only…
Falls ihr schon vom OpenPrintTag gehört hab, eher nicht vermute ich, da dieser etwas unterging zwischen dem INDX und COREone. In kurz es ist ein Aufkleber mit NFC Tag, damit könnt ihr ein Haufen Infos speichern, aber um zu wissen ob der…
A snap-in adapter for jessie filament, A easy to swap solution for your jessie filaments! just put a open print tag on it and insert the adapter through the core. Snug versions: if you have well tuned printer and want a snug fit loose…
These are adapter rings for 3DJakes PLA, PETG, ASA and TPU spools. Before printing, double check the dimensions in the file name with your spool, 3DJake has some variants of similar spools and if you encounter one that I haven't uploaded…
Du willst deine Filamentrollen mit OpenPrintTag -NFC-Tags versehen, aber nicht auf die Spule kleben? Diese Nabe steckt man einfach ins Spulenloch, bis sie hinten einrastet. Der NFC-Aufkleber sitzt in einer Tasche in der Lasche am Flansch…
With Prusa’s NFC spool reading on the Core One, Prusa spools tell the printer what’s loaded. Everything else doesn’t. This adapter fixes that for third-party spools by putting an OpenPrintTag NFC sticker right where the reader expects it:…
reusable label for open-print tag, press fit for https://www.printables.com/model/1174281-esun-reusable-refill-spool
I made a ring so I can use the tags with different spools, mainly for storage in a Polydryer box or vacuum bags. If you have access to a laser cutter, use the DXF file; I made the rings from 2mm acrylic.
Overview This is a standalone remix of the Gridfinity Openprinttag holder designed by uwearzt. While the original design integrates into the Gridfinity modular ecosystem, this version is tailored for makers who prefer storing their…
This is an adapter for the OpenPrintTag Modular Spool Adapter Baseplate , designed to fit SUNLU V2 (Gen 2) filament spools. First, press the OpenPrintTag baseplate onto the adapter until it snaps into place. Then, press the assembled…
*** Full Transparancy: I designed the model and then used Claude to build the SCAD files *** Introduction There are a lot of files for spool adapters on printables. So why make another one. Well I wanted one that was quick to print, used…
Antenna housing to relocate the antenna of the Prusa OpenPrintTag upgrade for CORE One/L. I used it to put the antenna on my Core Ones side door, which allows it to read OpenPrintTags inside the spool holder and in a dry box next to the…
WARNING: You need to cut a little of the OpenPrintTag sticker to use it with this adapter. However, as you don't cut the antenna nor the electronics it's safe to do it, but I'm not responsible if you mess it up. Do it at your own risk.…
A quick remix, 22mm longer to the right to fit OpenPrintTag+Universal Spool Puck
New version of the internal knob to hold the OpenPrintTag - two sizes 50 and 55mm for different spool sizes. You may notice a small groove close to the knob's edge - it helps to properly align the tag when placing it onto the knob. Once…
When printing PETG and ASA I usually print directly from a drybox which sits next to the printer. After upgrading my CoreOne L with the new Prusa OpenPrintTag reader I realized I have an issue with the drybox placement. The issue is not…
Minimal housing for the Electronics/ PCB of the Prusa OpenPrintTag upgrade for CORE One/L. Use it to relocate the electronics when modding the OpenPrintTag reader. Needs 2 M3x8 or M3x10 countersunk screws to clamp it shut. Uses 4 15x6x2…
Introduction So I was buying some nozzles and Prusment from the Prusa store and had seen the announcement about Open Print Tag Upgrade and decided to pick up one of the readers to play around with it. When when it finally arrived and I…
Simple mod! The quick disconnect feature works fine, but I feared it would wear out over time if I used the bayonet mount every time. (It’s a little more convenient to leave it in place too!)
I've designed a simple, practical solution that allows the reusable OpenPrintTag , created by @Martin_Url_103553 , to be easily attached to a Purefil filament spool . This design provides a convenient way to securely mount, remove, and…
Updates Have a look at the new slim version! Description This is a set of snap-in spool adapters designed for the OpenPrintTag . Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in…
A set for OpenPrintTag consisting of: Base for the sticker Positioning aid for sticking Set of fixing rings for the following spools: Prusament (empty weight ~200g) Esun cardboard (empty weight ~160g) PolyTerra cardboard (empty weight…
This device is an OpenPrintTag -compatible spool scanner that reads and writes NFC filament tags, displays spool data on an LCD screen, and automatically updates remaining filament using the PrusaLink API. It exposes the spools in Home…
OpenPrintSense - 3D Printed BLE Flex Sensor Glove OpenPrintSense is an open-source project that combines 3D printing, hardware, and software to create a wearable finger tracking system. The key innovation is a fully 3D-printed flex sensor…
I made a simple adapter for Open Print tags. I just attach it to the spool using small pieces of double-sided tape. This way, you can keep reattaching the tag to new spools.
These are dual-purpose adapter sleeves that allow you to use third-party filament spools in your Prusa USS Drybox without them dragging on their rim, and allow you to mount Prusa's OpenPrintTag NFC tags on difficult spools that are the…
reusable label for open-print tag, press fit for https://www.printables.com/model/1174281-esun-reusable-refill-spool
These are dual-purpose adapter sleeves that allow you to use third-party filament spools in your Prusa USS Drybox without them dragging on their rim, and allow you to mount Prusa's OpenPrintTag NFC tags on difficult spools that are the…
