733 modeli
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a fast and easy to print case for a RPi 4. The cover simply snaps-in making it simple to access the board. It is compatible with all versions of Raspberry Pi 4. If desired, you can add : 4 screws (M2.5 x 5) to secure the board.…
Wydruk około 3,76 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Double Helix AAA Battery Holder - with optional extra compartment This is a fun little print that not only looks neat but holds up your AAA batterys. There are two different versions, one has some extra storage for batterys inside the…
Wydruk około 6,95 €–8,49 € nettoWstępna wycena jednego wariantu
A simple and satisfying gear fidget toy with an optional piece to add a clicking noise. The small T-shaped piece can be left out if you wish to have a more silent fidgeting experience. There's 3 different gears to choose from, each has…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Patch Notes: January 11 2025: Comfort ring + Other comfort fixes January 20 2025: Optional keychain hole + Minor fixes January 21 2025: Anti-Wobble Caps Silent Fidget: 4-in-1 Design (requires 2 bearings) A 4-in-1 quiet fidget that is…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Scalable Design I designed this 5" self-watering planter insert to easily be scaled up and down for different pot types. Simply measure your pot diameter and set the dimensions in your slicer. The design is 5"x5"x5" which makes it easy to…
Wydruk około 6,17 €–7,54 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
The evolution of my 3d printable gaming trays for tokens, resources, etc. have led me to these hexagonal stacking gaming trays. I started with spline based profiles revolved around a central axis. Then someone asked me for hexagon shaped…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Handy unboxing knife for your keychain with optional snap on cover
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A very useful utility for every maker - Right Angle Ruler! Print instructions ⬢ Material: PLA . ⬢ Infill: 15% honeycomb . Tip: remove the top and bottom layers in your slicing software - you can install **5x5mm magnets** into the…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
[ENG] A simple keyring with SUZUKI logo designed for three-colour printing in layers using a manual filament change (e.g. with the M600 command). It is also possible to have the name of the motorcycle inserted from the back. Therefore,…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a remix from a couple different T-Slim Filling Tool models - made to align the cartridge with the syringe for easier refilling, especially for those with limited mobility, or younger children who may need help while remaining…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Important note: Adding text to the holder requires PrusaSlicer version 2.3.2 (in beta, as of July 3, 2021, available to download at https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.2-beta ) and above . The older version…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple keyboard stand inspired by the acrylic keyboard stand from ( https://thekey.company/collections/accessories/products/acrylic-keyboard-stand-pair ). I wanted a simple, robust, and attractive stand for displaying a keyboard…
Wydruk około 6,87 €–8,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapted from sensa.co emoji library. Build Instructions: Print file/s Glue on handle with hot glue or epoxy (Optional) Enjoy/receive an infinite amount of love from anyone who receives the gift of this stamp's imprint Get called a “cringe…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Bowling Lane Business Card Holder With Optional Website Plaque Sleek design slides and holds together without glue (though glue is recommended) You will be able to add a custom text to the front plaque when PrusaSlicer 2.6 comes out…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Version 4 - bigger cable channel (5mm) + lid to close the PCB with voltage stabiliser. A dummy C-size cell that lets a 3.6 V battery-powered device run off an external supply instead of eating a primary lithium cell. The body copies the…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Give your favourite official 3DBenchy the display it deserves! This display stand is precision designed around the dimensions of the official 3DBenchy , creating a recessed "water effect" base that securely locates the model while giving…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…
Print as the attached .3mf files (for 0.6mm nozzle) to get the best strength for the parts. The filler block should be adjusted to match your door, and can be left away of course if there is no height difference. In my case the height was…
Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…
Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
03-01-2023 small update Added some pictured to display that Watch holders are optional and some of the assembly. ----------------------------------------------------------------------------------------------------- Drawing inspiration…
I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…
Prints as 2 separate pieces that press-fit together. Take note of which base to use. One of them has a slot for a gift card and the other does not. The assembled height is about 10.5cm (4") tall. The base is 4cmx4cm or 1.5"x1.5" The…
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
This is a fully customizable magnetic screw tray. It is designed to use any common round/cylindrical neodymium magnet. Compartment size is fully configurable You can have it separated in as many compartments as you like. You can have 1,2…
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
This is a motherboard tray to fit a standard ATX motherboard. The optional card support bracket screws into the side with two to eight M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four…
Happy Halloween! 🎃👻🍬 I created these candy bucket earrings for my wife last year, and her friends all wanted a pair too. Now I'm sharing them with you all! These are guaranteed to each hold at least one m&m! (Disclaimer: all guarantees…
Give your bathroom sink a clean and modern look with this practical soap dish for standard soap bars. The raised radial ribs keep the soap above collected water and allow air to circulate underneath, helping the soap dry more quickly…
Important Note: I cant add a second model for the sources. Ill try again later but for the meantime know that the base model came from here: https://www.patreon.com/posts/cod-mw-2-2022-74410404 I have added a third lens like several other…
EDIT: 1/12/2026 - After printing the original file from @JakJak I found the tolerances on the dongle slot version were way too tight for my dongle. Maybe my printer isn't tuned and maybe the 2C controller dongle is a different size.…
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…
It's a floppy ghost for all your fidgeting needs! If you don't have an AMS or similar multi-color system, you can still print it in all white and will look beautiful! Printing Instructions: The 3mf file provided was created using Bambu…
This model inherits the characteristics of PsychProd's original model: Fast print speed due to the clever basket design, great air permeability, and the option to add space for a hygrometer. In-spool locking: The one thing that bothered…
Customizable Couch Armrest Table with optional Tablet Holder First and foremost, this is an armrest table for various sizes and shapes of couch armrests. On top of that, I found it appealing to attach things to my sofa. So, with the…
This is a motherboard tray to fit a microATX motherboard. The optional card support bracket screws into the side with two to five M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four M3x6 or…
Check out my new Toy Switchblade design here . This is a revised version of my first balisong design. This new design is balanced better for flipping, very durable, and easier to print. There are also many options for customization. There…
This caddy is perfect for those backyard cookouts or any informal dining table. Holds ample amounts of cutlery, napkins and condiments/seasonings. Two sizes 180x180 and 210x220. Will easily rotate on a hard surface, but optional rotating…
Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…
This project is for the 2.42" OLED screen (IIC or SPI) Preferably with the pins on the top center of the long side as shown in the pictures. The ESPHome code for this project can be found here at…
For the rest of my SKADIS things look HERE UPDATE: Added a version with 110cm internal width. I wanted a slim container for some tools on my IKEA SKADIS, So I made a box aproximatly 70x40mm inside. with 2mm walls. This uses the universal…
This is only compatible with the K1 (not the Max). The main goal of this mount is to have some protection over the motherboard if you're using your printer without the bottom panel. And if you install this mod you will no longer be able…
It's a very simple spool wall mount. Insert a PTFE tube into the hole on the front and push it to the very end, then cut off the excess. Spools glide really good and self-center. The optional guide is printed in one piece. You need to…
A stash container fit for a king! This oversized chess piece isn't just for show. It has a small hidden compartment too. You can also print this without the stash compartment. I printed mine with .20 layer height up to the crown. Around…
This lovely ring rests on your index finger as you perform your various crafting tasks. When you need to increment the counter, simply slide your thumb over. Can be used for a variety of counting purposes, but for the yarn crafters out…
I originally found this model for free somewhere else. I don't remember where exactly and I can't find it anymore. When searching through yeggi, i think it's from cults, so i chose that as source, but it has been removed from there, so I…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
iPhone 14 Case, rugged, designed to be printed with TPU/TPE. Extra material on the corners for ruggedness. Optional Popsocket cutout, which allows for it to not stick out as much when stowed. I've been using it for a year and it's been…
Two versions are included, a “Simple” one which is simply the case and a “Mounted” one which allows to.. mount the Pi on something using taper 3x6 screws (I used wood screws to mount it to the side of my Lack enclosure). The “Simple”…
Description An universal set of crates of several sizes. These can be stacked together and have slots to add signs to know, whats inside. Signs can either printed from the included files or added with handwritten paper with 29mm width and…
Video of dumping 2 back to back mags of binary with V4 EDIT (6/5/2024): V3 and V4 release. I have personally been using V4 for 2 months no issue in pa6-cf. The default clearance is made for an omega 9k which is 37mm, but the diameter of…
Update 6/26/23: v2 of the bar and shelf mounts are 20mm longer to hold the lights further off the wall, and to provide more support for the shelf or hold a larger shelf. ========== I designed this scalable system to fit any Honeycomb…
Introduction: This is an ESP32 D1 mini case for temperature and an optional mmWave Radar presence sensor. Optimised for space efficiency and the placement of the temperature sensor has been optimised to minimise self heating from the…
This modern Voronoi-style storage box is designed for both aesthetics and practicality. The model includes two lid options : Voronoi Lid – matches the artistic pattern of the box Solid Lid – clean, minimal, and fully enclosed 📐 Dimensions…
Yeti Lid Holder https://i.giphy.com/media/zvpds7EGBb5rDojsNq/giphy.mp4 I created this model to hold Yeti lids. It has a 10mm square hole in the base that can hold a 10mm square magnet, if desired. For the yet lids that have the magnetic…
This is the fantastic Rugged Box by @whity adapted to the HDZero goggles. It includes enough space to accommodate the expansion bay on the side, in theory (I don't have one to test). Also includes an area for cords, antennas, etc. You…
Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen and also guarantee no sanding/post processing would be needed with an out of spec print. Newer fat links are…
Do you need a last minute gift? This might help you :-) All you need is a photo. You can resize the model to all photo sizes. I hope you like it and you can use it. In Germany you can print at most “dm-drogerie markt” for 50cent a 15x20cm…
The Apollo Automation R PRO-1 PoE mmWave Multisensor (LD2450 and additional LD2412 add-on option) is our most advanced presence sensor. Designed for power, precision, and reliability, the R PRO-1 is a compact PoE mmWave sensor built for…
This project was inspired by a small water-cooling project in a Thermaltake Tower 100. The TT100 case has support for full size ATX power supply, but I wanted a water-cooling system with the following: -a drain port for flushing out the…
Stackable shoe rack with hex-pattern. Print with top on the bottom, gyroid infill recommended 10%-20% for stability, PLA preferably PETG Use support for the holes, rest should be printable without if you guys are interested i can also…
F1 2022 looking body for the HPD EVO developed by Kent Asplund. It requires the ESC to be mounted vertically. Print vertically and halo doesn't need supports. Requires 2x M3x6-10mm fasteners to attach the nose to the body from the nose…
Reworked just the Body portion of the original design as Cardboard spools (from Elegoo) needed more clearance. Those walls would grind at the cardboard and leave dust. Use the instructions and other components from "Elegoo Neptune 3/4…
Work in progress
A motorized turntable for various applications, like 360° videos,… super easy to assemble (only 3 parts) and perfect for a first small electronics project. . After uploading a small washing machine, I realized that I didn't have any good…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
I've remixed a Satsana 5015 to fit with the Ender 2 Pro. Some Modifications made: Optional Orbiter V2 Direct Drive mount Fixed CR Touch mount (My klipper offsets - X:-44.5, Y: -13.5 Z:1) Optional ADXL mount on the side (1x M3 Hole) Print…
update 230709 added Mamiya CS as camera mount (ZIP got updated) ______________________________________ This system of modular lens caps consists of two components - an inlay that connects to the lens and a cap with a punch-out of your…
Edit - I've used this for six months now and I don't have any desire to redesign stuff. It's worked out really well! My Hakko does not come out nearly as much with this solution at hand for small projects. This is a Pinecil case I…
This is a case/tray for the Corne v3 (although it should fit all variants). There are options for both choc or MX builds, and with or without optional tenting. The Choc version uses M2 heatset inserts in the base to fasten the plate to…
Since the PRUSA Accelerometer does not have to be permanently connected to the printer and recalibration the Input Shaper is only necessary if modifications are made to the printer, I looked for a way to store the accelerometer safely.…
Simple holder with compartments for AA and AAA batteries. It requires a minimum amount of plastic to print. I don't like the idea of having different organizers for these two types of battery so I created this design to keep them all in…
The stuff you need to know: Magnet holes are 6.2mm in diameter STEP file is included for editing Holds two 68mm diameter by 19mm rolls Print Settings: Supports: none Brim: optional Infill: 15% Perimeters: 2 Material: any Check out my…
I wanted to have nice connectors for the extension of my MK3's PSU cables without having to tear down the entire cable harness. Since there were no proper screwing terminal blocks available out there, I did it maker style and designed my…
The additional support part is only optional for filament spools up to 1kg, but mandatory for heavier spools (for example 3KG). Thanks to https://www.printables.com/de/model/45153-flsun-qq-qq-s-and-q5-spool-holder for inspiration, great…
Backpack module for 5" FPV quadcopters. Please do verify the dimensions of your quadcopter: backpack is 20mm high. Check that your frame has at least this height. mounting points are separated by 24mm (measured center-to-center) mounting…
Automatic refilling bird feeder with optional wall mount and slider to minimize food waste. Can fit all sizes of soda bottles due to the thread. This is probably not the most material-efficiënt design for a bird feeder. However, it is…
NEW IMPROVED VERSION: https://www.printables.com/model/502268-automatic-refilling-bird-bath-with-soda-bottle-thr Automatic refilling bird bath with optional wall mount. Can fit all sizes of soda bottles due to the thread. This is probably…
(DE) Ultra schnell zu druckender und formschöner Schlüsselanhänger mit 2 Bohrungen auf der Rückseite für 2 optionale Neodym-Magnete (Ø6x2mm) um einen besseren Halt z.B. an einem Whiteboard zu erreichen und die Schlüssel schon zu…
NOTICE: If you are printing this for the 2022 LM Show Christmas community print drive, please follow the guidelines posted at https://print.thelmshow.com/pages/2022-christmas-community-print-drive-guidelines to provide strong safe toys…
DIN rail mount for the Raspberry Pi 4B with an optional mount fo a 60mm fan. Prints without supports. Printed in PETG at layer height 0.2mm. I mountend the Raspberry with M3 brass standoffs. The Raspberry is designed for M2.5 screws! I…
Deutsch: Ich habe zwei Hüllen für das normale iPhone 13 entworfen, die MagSafe kompatibel sind. Beachte allerdings, dass die Hüllen 3mm dick sind und die Aussparung für MagSafe auf der Rückseite einen Durchmesser von 65mm hat. Entworfen…
This is the first version of my K1 Max Lid Riser with an optional vent cover. I printed it on my K1 Max in PLA (will I prototype) using the default orca slicer profile. Completed in 2 x print sessions. all components are glued together…
Remix of the Y-axis link from: https://www.printables.com/model/310284-ender-3-s1-cable-chain Hardware needed: LED light strip (if using the LED light model) M3 x 6mm screw (optional, but strongly recommended) Designed to create…
Quick Facts Design: Custom-designed Aviators specifically sized for Labubu dolls with a snug, secure fit . Speed: Quick print that completes in approximately 28 minutes . Quality: Optimized with variable layer height for high detail where…
Summary After all the updates I should summarise what's now in this model: A minor remix of Prusa's original Tool Dock model to include magnet poke holes. As well as this simple remix, all the other STLs in this model include these holes.…
I work retail and open boxes and packages all day. I need a utility knife I can carry in my pocket, open with one hand, and change the blade when dull. This little guy is 6mm thick and rounded all around for easy carry. The textured thumb…
Free sample STL file. This file does not contain the full details/textures, nor the full poses, weapon and pet options of the main pack. Rat swarm clan leader armed with a single blade. Includes a version with a back banner and one…
![Silent Fidget: 4-in-1 Design [Optional Keychain Hole]](https://media.printables.com/media/prints/1112357/images/8597088_614ab486-ef8a-486f-a37e-5ddec4861b6c_49b9d3bb-48f4-4bec-a260-c382bfc57953/the-quiet-fidget.jpg)
