5290 modeli
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple yet effective corner cable mount designed for zip tie usage. This model allows you to secure cables neatly along 90° corners — ideal for walls, desks, shelves, or inside enclosures. Features: Designed for use with standard zip…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…
Wydruk około 13,77 €–16,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Corner Clamp is a precision tool designed to hold corners securely in place while clamping, ensuring perfect corner, T, or + alignment for woodworking projects. Ideal for assembling frames, boxes, cabinets, and other structures, it…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Router template to create a perfect radius on your corners
Wydruk około 5,50 €–6,72 € nettoWstępna wycena jednego wariantu
This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…
Wydruk około 7,63 €–9,33 € nettoWstępna wycena jednego wariantu
Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cat & mouse door/window corner
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
simple block for mounting the camera in the corner with the default base and strain relief I had some spare SPAX screws here. If you want other screws, modify the attached AutoCAD file. BOM: 2x SPAX Screw 4mm for wall mounting 2x SPAX…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Transform GraviTrax Junior with this compatible 3D-printed corner piece! Take marbles on a thrilling ride with twists and turns. Also contains a hole so you can add your favorite accessories. Will need some support and a little bit of…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This adapter enables mounting of the G4 Instant in a corner. The original mount is attached to the adapter using 2 pcs of thread-forming screws with dimension B3x10. There is space behind the adapter for cable routing. Print the model…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Take standard clamping bands (1 inch wide), add 4 of the 3D printed corners, and you're ready to glue wooden boxes or other things that have 90 degree corners. The main advantage of this design over the purchased version is that the…
Wydruk około 6,10 €–7,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Angles for OSB or MDF panels with a thickness of 18 mm. Color the corners of your furniture.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
This simple clip allows you to take accurate measurements of inside corners with a tape measure. No more guessing what the length is inside the bend! Just slide the clip up to the corner, pull the tape back and read where the edge lines…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a 45°/135° angled IKEA Vidga corner piece but IKEA only sells 90°. So I created an OpenSCAD model where you can set any angle you want. Adjust angle and radius in OpenSCAD file Printable with minimal supports. Use brim
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Topology Optimized Corner Brackets. Used for a Printer Enclosure with 20x20mm Aluminium Strut Profiles.
Wydruk około 3,81 €–4,65 € nettoWstępna wycena jednego wariantu
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Lack Enclosure Corners/Cones if you are using a third table for height. Positively locates top two tables on 3rd.
Wydruk około 10,58 €–12,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The 3mf file has the seams distributed a little bit to check their impact. My mini has severe under-extrusions in rounded corners after a long straight. Short straights are ok. Just print it and see if yours look nice. I added pauses to…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview TexRC KerbTex Hairpin Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 90 degree corners and 45 degree corners.…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allows up to 19mm Laptop thickness +/- tolerances of your printer. Mount conservatively with 3M doubled sided 9080 tape (you don't need much). Printed in PETG @ 0.30mm layer height, 15% gyroid infill (modified 0.30mm DRAFT) on Prusa i3…
Wydruk około 4,29 €–5,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
CORNER BRACKET for fixing a SilverCrest lidl MOTION DETECTOR. SilverCrest Motion Sensor Model SMSZ 1 B2 manufactured by Lidl. I looked for a simple solution is effective, This radar has an aperture of 120 deg, for a height of 2.30m the…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Corner mount for Sonoff SNZB-03 motion sensor with a decline angle of 30°. Mounted with double-sided tape. Designed to fit snugly around the sensor. When not mounted to a wall the sensor can slide in and out sideways. If the fitment needs…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
This robust tool allows you to glue panels of varying thickness, up to 25 mm, squarely. Printed in PETG, requires few supports. The screw must be imprinted vertically, placed on the head. It has a reserve for sticking a 3 mm diameter…
Wydruk około 9,14 €–11,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Wydruk około 1,26 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cord hook design accommodates a heavy duty, 12 AWG / 3 conductor, extension cord with a maximum diameter of 15mm. The corner hook design allows the extension cord to be gently bent around a 90-degree corner. This allows the cord to…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount. Big thanks to user PHOENlX for providing mount on Thingiverse. https://www.thingiverse.com/thing:4930947 Print Settings Printer Brand: Prusa…
Wydruk około 10,64 €–13,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I believe, that I created my usefull Removable Combination Butterfly Corner Code for everyone, who need connect a some stuff, like furniture, shelfs or some DIY projects. I tried to design a very minimalistic and simple design of my…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview TexRC KerbTex Medium Radius (300mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 45 degree corners and hairpins.…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
this corner is designed to build a new screen for your rv camper window. it will not fix your old one. you will need to get a M-D 5/16-in x 5-ft Bronze or any other color Aluminum Replacement screen kit from lowes. Springs in kit go…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
These are plastic corner pieces that you can use together with 4 mm thick mirror sheets to make a mirror cube or cuboid. Works nicely as a decorative stand/table e.g. as the base of a plant or another decorative item. Print instructions…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
Overview TexRC KerbTex Large Radius (600mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 90 degree corners and hairpins.…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
6 corner connectors for a box rain gutter Description : We have built a 6 corner garden house with a box rain gutter. But the corner connectors are only available as an optional accessory for a price I did not want to accept. So DIY…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hier eine Möglichkeit den MMU3 Buffer aufzuhängen. Ich habe die Strebe an den Segmenter geklebt. Die kleinen haken in entsprechendem Abstand an die Wand geschraubt und schon kann man den Buffer einhängen. Da es sich in meiner…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This compact perforated board is sized 90 × 90 × ~3 mm with a dense, symmetric hole grid—handy for zip-ties, M2–M3 fasteners, and wire routing. It’s sturdy enough for small brackets and mock-ups, yet quick to print. Also included: four…
Wydruk około 6,64 €–8,12 € nettoWstępna wycena jednego wariantu
This is a small sculpture I made for fun, and decided to share the result. As it was made for fun, is not well optimised for printing . In fact, you should expect a lot of imperfections , so consider that before printing. If you chose to…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Needed a coat hanger for my work cubicle and the mounting holes were there and just begging for a hook. Printed in PLA, 3 perimeters, 20% cubic infill. Has held up so far.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
This spatula have got special corners for easier removal of supports. Tested with PLA
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Jelikož ochranný roh je ze silikonu a nedrží na něm oboustranná lepící páska a spadává ze stolu, vyrobil jsem podložku, kterou jsem přilepil vteřinovým lepidlem na ochranný roh a teprve podložku až oboustrannou lepící páskou. Nyní drží…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is the middle bracket on a DELACK enclosure with a cable holder for the Buddy3d camera cable.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Corner brace 100 x 100 mm (4 mm thick) with 3.5 mm holes for 3 mm screws. We use it for harden our blueberry bush net cover construction (against birds). CZ: Rohová vzpěra 100 x 100 mm (4 mm tlustá) s 3,5 mm otvory pro 3 mm šrouby.…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Generally, bosses for tapping screws installed on the top surface take an overhang shape. Traditionally, to alleviate the overhang, it was necessary to install supports or model the bottom of the boss with a tapered shape. However, these…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Use to connect wooden sticks, bbq skewers, toothpicks, thin dowels etc. together to build model buildings, furniture, etc. Teaching engineering and design to elementary school students. Used tinkercad for design. See photo of applicator…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Simple base for Conquest character. Holes for 3x1 mm magnets.
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Description The former IKEA Corner base cabinet pull-out fittings from the series Rationell tend to sag under the weight of the pots. In my case, the front corner hung more than 7 cm lower than the center bearing, and the pots slid toward…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
IKEA Lack enclosure table middle corners
Wydruk około 5,23 €–6,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holder for the Xiaomi Mijia 2 Thermometer/Hygrometer. Mine kept disappearing. If glued to the wall, it was a pain to change the batteries. So i made this holder. One standard wall mount and one Corner Mount. The Corner Mount can be…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
coin de remplacement pour lave vaisselle professionnel - replacement corner for professional dishwasher
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
building a utility sink cabinet for our home and needed some legs for it to keep it off the damp concrete floor. I was inspired by hairpin legs and other styles or corner and pedestal legs. I've printed them in multiple sizes but only…
Wydruk około 14,44 €–17,64 € nettoWstępna wycena jednego wariantu
Remix of a design by J-Max from https://www.thingiverse.com/thing:1306832 These are corner square clamps in 30 variations used for woodworking to hold two pieces 90 degrees square during a glue-up or pocket-hole join. Regular clamps of…
These are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis…
NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…
Normal 3d-printed brackets can easily break if you overtighten the screws. These brackets are specially designed for FDM-3D-printing. Because of their wide surface areas on every layer they can withstand multiple times more force than…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
Snap-in corner covers for Prusa CORE One printer. Depending on your door orientation, print one of either the “standard” or “swapped” covers. Use this for the corner with the door handle. Print three of the “original” covers and use these…
Build plate corner guides for the Elegoo Neptune 4 and 4 Pro printers. It accounts for the margins needed to give clearance to the underside of the heatbed You can stick it with double sided type, I used VHB. Printed in PETG for more…
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Burry the tunnel under your aquarium soil or gravel and let your fish explore it. All the edges are rounded to protect you fishes' fins. With dimensions of 140mm x 140mm and a 37mm roof height, (50mm overall height, including the…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170277#profileId-186972 Hate having to use a plyers to remove the bit? Well no longer. This remix has relief cuts on all the corners meaning…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Strong corner mount brackets. Mounted using screws d=3mm :)
Cute spider on a web in the corner on his print-in-place web. Space for (4) 12mm (1/2") magnets to stick to a metal door frame, or just tape/command strip in place. Mine also stuck to the metal corner beads of unframed openings at my…
The Corner Clamp 90° is a practical tool designed to securely hold parts at a perfect 90° angle . Ideal for gluing, assembling, or aligning corner joints with precision. The design consists of 5 parts : BASE – holds the inserts and the…
Corner bumper prints without any supports. Use a hard TPU if possible but even some regular PLA is better than nothing. If you have adhesion problems use a brim. Use some double-sided tape to attach.
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) The Corner Mount – Invisible is a minimal and functional wall or shelf support designed to fit perfectly into 90° corners. It features a…
Motivation I wanted a clamp that didn't need me to purchase a separate threaded bar, was strong enough to use for woodworking projects and significantly cheaper than metal clamps. I prefer this single screw design for being quick to…
Attach to the corner of "CORE One"
This radius gauge allows you to determine the corner radius of parts using a standard caliper . Tested with a Mahr MarCal and a generic low-cost caliper – compatible with most calipers. To calculate the corner radius, multiply the caliper…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Durable Brackets Collection, designed for M4 / M5 Screws. Enjoy. Layer height 0,20 Infill 15% Perimeters 3 Standard noozle 0,4mm Material PETG Supports No
I wanted a corner radius template for making nice rounded edges on woodworking projects. I saw a few, but didn't like them for one reason or another. I tend to make a lot of small projects and want something for the router table. I also…
The Corner Clamp – Strong set includes three versions : 50 x 50 mm 100 x 100 mm 150 x 150 mm Each clamp is designed to help you hold pieces at a perfect 90° angle during gluing, screwing, or assembly. With a thickness of 20 mm and a…
This 90° Corner Clamp will give you a helping hand when holding 90° corners and "T" joints together securely during assembly. A second is included for “T” joints or to allow access for gluing. Great for things like constructing model…
Here is my second design for everyone! This one has the commercial license on as promised! Spooky spider web for your doors! Even has a little spider friend(Fred) hanging out! If you have any ideas on how to improve let me know! Also when…
The Strong Corner Bracket is designed for reinforcing corners where three panels meet at 90°. With dimensions of 50 x 50 x 50 mm , it includes screw holes suitable for screws with a diameter of 3–4 mm . To reduce material usage without…
Each corner bracket is designed to be mounted using 4 screws with a diameter of 4 mm , providing a strong and reliable connection. Features Strong and durable design Uses 4 × Ø4 mm screws per bracket Chamfered screw holes for a clean…
Simple strap clamp corners for miter joints, framing, drawers or box making. Print twice to make one corner clamp. The two halves can be glued. Dimensioned for 25mm (1 inch) bands, easy to scale to any other width.
This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
Added a corner piece that will work for both the left and right corners, no supports needed. hollowed for less material
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
This is an easy and fast to print model. It requires no support. You need to print 4 pieces and then you can shove them on you tensionbelt and they wont fall off. There are differerent versions for different belt sizes.
6 different sizes M3 corner mount brackets: 25x25, 30x30, 35x35, 40x40, 45x45, 50x50 mm ( Parametric STL )
This is the first one you need to print to use the riser mod. There are two different mods, one completely closed and the other with adjustable grids. To print it you can put all the corners together, no supports are needed. The…
This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Modular Corner Shelf System Turn unused corners into serious storage. Stop wasting corner space. This modular corner shelf system lets you build clean, strong, and fully customizable storage exactly the way you need it. Print one level —…
Modular Corner Jig with option of changing corner Radius Inserts. How it works? Very simple! Just choose insert with needed Radius, put it together with Main Jig Body and secure the insert with a Lock screw. Main Body has a threaded hole…
Simple to print. Two different tolerance available for mounting brackets. If brackets are tight to insert heat Voronoi shelf using hair dryer/heat gun and insert the mounts, this gives a tight and rigid connection. Refer images for best…
I designed for my wife a point tuner to easily arrange the corner without damaging the fabrics. To print in PLA with 0.4mm diameter and layer of 0.2mm.
You can easily scale the print file, but make sure that the height remains at 3mm. There are two bed in the project - right/left corner version. The bed names is right accoding the final print model's placement (mirrored to give the model…
I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
