400 modeli
This case was designed to house a Raspberry Pi 5, the Pimoroni NVMe Base and an optional official RPi Active Cooler. It is a 3-part print: The bottom of the case The lid of the case The power button Holes have been added in several places…
This is a complete replacement for the SJÖPENNA IKEA lamp beside the lampshade. It includes an LED rail on which an led strip with a width of 12mm or less can be placed (Like APA102, ws2812b) as well as a controller housing on which a Pcb…
A coin with the Kopimi logo engraved on it. Uses art from Wikimedia Commons .
Om dat ik s'avonds niet goed meer kon zien wat de printer printe heb ik een lichtje ontworpen. Because I couldn't see what the printer was printing at night, I designed a light. Ludo
Brr. Brr. Patapim, my hat is full of Slim. In the dense and mysterious forest, Lived a being most curious. With tangled roots and crossed legs, Thin hands and waving arms, His nose as long as a ham, A bit like a baboon, a bit like a bush.…
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2…
NOTE: this interface was designed to suit the studioform BSB X1 foam interfaces/the original V1 studioform dream air interfaces (which were the same thing). If you want to use the newer v2 studioform interface they are notably larger and…
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
I would suggest PETG at 0.2 layer height.
When printing screws upright the threads are printed with the best quality but the screws are not durable because they snap between the layer lines. So I designed screw models that are optimized for printing flat on the side. The…
(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…
A tool-less case for a Raspberry Pi 5 with the Pimoroni NVMe SSD adaptor base. It's also designed for the OEM Pi active cooler. Assemble the Pi / Adaptor / SSD as per the Pimoroni instructions with the stand offs and 8 screws that came…
Just some rims to add style to your Luba. With a hiding spot for your AirTag.
Fan-made model of Pim from the Adult Swim show Smiling Friends. Depicts Pim when he has an existential crisis at Daveland. It was modeled in Blender as my first ever completed Blender model :)
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Two versions are included, a “Simple” one which is simply the case and a “Mounted” one which allows to.. mount the Pi on something using taper 3x6 screws (I used wood screws to mount it to the side of my Lack enclosure). The “Simple”…
This is a reimplementation of @mikiklopsiki's Inky Impression 7.3" frame case model on Thingiverse. It is written in OpenSCAD to allow customizability, but also implements a few changes from the original on its own: Significantly tweaked…
To make it easier for users to mod their devices, we've added STP files to our Printables profile. The latest one to be added is a cover for the DP cable where the two cables blend, which can clip onto the fabric backstrap.
Da mir der Sound von den SMAS Lautsprechern viel zu leise war habe ich mir diese Trichter konstruiert und gedruckt um mehr Lautstärke zu bekommen. Mit dem Audio Booster ist es ca. doppelt so laut Mit Ohrpolster ist das mindestens 3x so…
Designed to fit on the center back of a Vision Pro Dual Knit Band. I made it to fit my Medium size band so not sure if it will fit Large. The Part B clip is made by Reavo, I just lengthened it to fit in the center of the back of the…
New Model: Raspberry Pi 5 Case for Pimoroni NVMe SSD
Pimp your boat guyss Make sure to have a good calibrated boat, the fit its perfect for one good calibrated micro support on the top of the air intake No glue needed Printed at 0.1mm layer height with 0.4mm nozzle Infill doesnt matter I…
A wall-mounting and desk-stand case for the Pimoroni Inky Impression 7-colour e-ink display and Raspberry Pi Zero Print instructions This is a wall-mounting and desk-stand case for the Pimoroni Inky Impression 7-colour e-ink display. I…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Ultra small Pi Zero Case with Pimoroni's Pi Camera Module https://shop.pimoroni.com/products/raspberry-pi-zero-camera-module [Type A: USB OTG and HDMI holes open] Top: Zero_Case_withCamera2_Top Middle: Zero_Case_withCamera2_Middle Bottom:…
Uses the simple (no mounts) case by @pyrho for the Raspberry Pi 5 with NVMe Base from Pimoroni. The NVMe Duo kit has 12mm stand offs instead of the 7mm ones in the original, so this accomodates those.
To have a good alignment the magnets need to be removed from the battery and the pisugar2. I added a version without pisugar and battery.
Pimped version of the OpenRC TruckV4 made by Mr.Crankface. Replaced rods by 3d printed ones, some adjustments to the center gearbox, and most important I added a second gearbox to allow the use of 540 motors. Print instructions Based on…
This model has been popular for many years because it is simply nice. After moving to new flat, I was looking for something original on the bathroom mirror. I printed the original and ... His arms fell off quickly. So disapointent... My…
Brr Brr Patapim generated with AI Image used for generate 3d model added in picture Background of image removed with: Adobe lightroom / You can also use Microsoft image editor, which have implemented automatic background remover Ai…
The Pimax Dream Air has a small box on it's cable that combines the two cables coming out of the headset. This box routinely gets in the way, getting caught on high backed chairs, and also gets warm when sitting on your neck/shoulders.…
Raspberry Pi 5 PCIe NVMe Case for Pimoroni NVMe Base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. Four mounting posts are provided to mount the Pi on top and the Hat to the underside. These act as a…
Still somewhat WIP (has some light leak at the moment), but I'm using it as is for the moment. This does NOT add any space between your eyes and the lenses, other mods exists if you feel your eyes are too close. This transformed the…
My collection of self designed OLED covers for CRKBD/Corne. Update 10th Nov 2021: added DXF file for pimoroni trackball version. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 10…
This is a remix of the version made for the Index that I used previously I added some felt padding to make sure not to mark the headset the headset is very stable inside it and can only slide out. The design make sure that the lenses are…
5° angled remix of the adaptors from @Zeeflyboy_341242
This is a combination of the models: https://www.printables.com/model/673539-wheels-rim-design/files and https://www.printables.com/model/137712-print-in-place-convertible Designed for Zombicide with the cars, I wanted a pimp car that…
I am learning with the Hueforge software, so I decided to share some of my work with u guys. You can find all informations about printing in the text document under. Don't forget about changing all the setting in your slicer. Enjoy :)…
I wanted to print a Case for my Pimoroni Pico Display pack 2.0. and couldn't find one that suited so I created my own. The case has a snapfit shell, buttons, led hole, and usb cable cutout. 14/06 I've added 2 additional experimental…
Controller holder Pimax Crystal Light for 4040 Aluminium Sim Rigs This is a holder I Made for the Controller of the Pimax Crystal light. This is needed motion compensation. The Bolt hole is M8 and fits the 4040 of 4080 alimimium frame…
Backstrap for the Pimax Crystal Super (regardless of which optical engine).
Se adapta para que los tornillos largos incluidos en pimoroni kit nvme puedan unir las placas a la carcasa. Se añade un separador de 1mm en la base para que encaje perfectamente y quede todo firmemente sujeto. Impresión en PLA sin soportes.
Pimax Dream Air Splitter Box Clip AVP Dual Knit Band
I've been using Meta Quest Pro in my flight simulator. I needed a faceplate that would allow me to look down the visor at the screens and switches in my cockpit, so I decided to modify Zeeflyboy's excellent file. I've added tabs so the…
NEW VERSION AVAILABLE HERE: (If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon…
A small box for Hydrocolloid Pimple Patches bought in amazon, its a recreation of one sold there. Update: Added a magnet version, need 6 magnets 6mm x 2.5mm or 6mm x 3mm preferably n52. It fits a mirror with a thickness of 1.9mm and the…
Angled case for the Pimoroni Raspberry Pi Pico RGB Keypad. Print Settings Printer: Geeetech Prusa i3 Pro C Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20 Filament: eSun PLA Silver Category: Electronics
I adapted the original model so that it can be mounted on a 40x80mm aluminum profile frame and requires less material. It also fits on a 40x40mm aluminum profile, but it might stick out a bit here. I used two M8x25 cylinder head screws…
Hi everyone! The original frame was, to my opinion, the most beautiful and practical frame I could find for the PiMoroni Inky Impression 7.3 eInk display. Unfortunately, when I received it, I realized that the 2025 edition PIM773 (the one…
A case for the Pimoroni RGB Keypad. Aiming to use it as a macro pad. My thoughts on where to go next... a display? Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament:…
After many requests from our community, we’re happy to finally share the 3D printing files for the Pimax Crystal.
I would suggest printing it with the jewel on the plate. print vertically.
A remixed model to add an Pimoroni NVMe Base to the Raspberry pi 5 This model has the LED & OLED openings (and a version that also has a button opening), and an opening to connect the USB-C port. The 4 holes for the NVMe base need to get…
Drag chain credits goes to https://www.prusaprinters.org/prints/40345-fully-parametric-drag-chain Drag chain end stop credits goes to https://www.prusaprinters.org/prints/104140-end-connectors-for-the-fully-parametric-drag-chain I printed…
Our range of Badgeware boards already come with a great polycarbonate case, but what if you want to integrate Badgeware into your own 3D printed project? This 3D "buck" (a full-scale template which can be built around) has been designed…
A quick and simple way to spice up the New Year's Eve dinner. You can also take a look at my other "Pimp my Toothpick" models: https://www.printables.com/de/@Healow/collections/1106283 Happy Printing! :)
A holder for Pimax Crystal controller that snug nicely so it doesn't move even for motion rig.
Sliced original gasket to get eyes closer to lenses. With and without forehead plate. More details here. https://www.reddit.com/r/Pimax/comments/1raaw2u
Simple picture frame for the Pimoroni Inky Impression 7.3" display. No tools or supports required, can all be printed flat on the bed. The display can be attached to the inlay by flexing it a bit in between the 2 ridges. The inlay can be…
Please note the different mounting hole positions: Tray - Pi 5 v2 - PIM699.stl: modified mounting holes, set back by 2mm Tray - Pi 5 v2 - PIM699_Original_Holes.stl: original mounting hole positions
I used 20mm spacers and put the NVMe base on top of the pi. Spacers are screwed to the bottom of the case and to the top of the hat.
There's a popular project right now using a 7.3" Inky Impression display and adding it to an Ikea RÖDALM frame . The original maker cuts the back of the frame to make the display fit which works fine, but I wanted to modify the backing…
Designed to accommodate the depth of the Pimax Crystal (Light), but it should work for almost any HMD. (Not suitable for PSVR2 due to how the visor is attached to the halo + the facial gasket is so soft it might hit the lenses). Spreads…
A bracket that is compatible with the standard Voron DIN rail clips and a raspberry pi 5 with NVME base from pimaroni.
NEW VERSION AVAILABLE HERE: (If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon…
The wildfire season in Oregon went from "hey it looks like we lucked out this year" to "who guessed apocalypse for 2020" in a shockingly short period of time. And as our air quality hit the lowest in recorded history I got to wondering…
I had no problems printing the screw - as some wrote - but it all depends on the printer and quality of bed. Before print I always using antibacterial wipes… As for me, everything done from PET-G, 80 degrees bed, 230 degrees hotend and…
A remix of the original interface to suit the larger v2 pads. If you prefer the smaller one then see the original model and for now you would need to order the BSB pads from studioform… but I believe they intend to re-offer the v1 pads at…
Remix of a remix here. First, I ran the bottom through netfabb which resolved a lot of errors. Second, I remixed the top to significantly short the screw pole closest to the GPIO pins. This allows one to use a Pimoroni Fanshim inside the…
This is a remix of rin_ofumi's great case for the Raspberry Pi Zero and camera module with the “Frank-S01-V1.0 OV5647” designation. It's sold online by Pimoroni and on Amazon by Arducam. I added slots on the top/rear to allow airflow for…
Adjusting the size, trimming the base and adding the hole for standard toothpicks.
Onshape: https://cad.onshape.com/documents/809c1d9aeac14ebee1c26306/w/fa98b59d5ea349d41a2c8a12/e/640e785a4a9a0e8f65ca9a5c?renderMode=0&uiState=66e48bfcb9fa683c1c80ea15 So, Dr Dread needs a case for a Raspberry Pi 5 with a Pimoroni NVMe…
Źródło oznaczyło ten model jako treść 18+.
This Frame holder is specifically designed for Apimaye hives. Can be used during beehive inspections. This will hold and support two frames. I recommend printing in PETG at a .16 layer height. For extra strength I advise using 3-4 walls…
There are other 3D printable organizers for Camel Up available but this one can hold the components from the original -- and only GOOD -- version PLUS offers space for the following replacement components: The awesome dice pyramid by…
After many requests from our community, we’re happy to finally share the 3D printing files for the Pimax Crystal.
This compact case is designed specifically for the Raspberry Pi-5 with the Pi Active Cooler and Pimoroni NVMe Base . This NVMe hat* mounts the drive under the Pi, allowing for better cooling of the Pi. I've designed the airflow so that it…
After many requests from our community, we’re happy to finally share the 3D printing files for the Pimax Crystal.
Increased bezel width to hide non-functional parts of the screen. edit 26/03/25: I initially uploaded the wrong STL. It should now be fixed.
Pimax Crystal Super frontcover (for any model)
Remix to remove logo from the frame and add spacious back cover since no back cover is provided anymore and the designs shown in the original are very thin and hard to work with. This is not a polished remix in any way, but is functional.…
It's to take place of the hearphones and there's the hole you can screw into so you can still attach the official Pimax Top strap.
This frame is designed to fit the Inky Impression 13.3" E-Ink display by Pimoroni with a Raspberry Pi 4 mounted behind it. The frame allows access to the buttons on the side of the display and has options for wall mounting or table top…
This is a simple enclosure, the back panel is a push fit. Printed in PLA+ at 0.2mm layer height and 15% infill 4 M2x5mm screws hold the PCB in place
10-Inch Rack RPi "Blade" System (RPi 5 / NVMe / PoE+) There are countless Raspberry Pi rack mounts online, but when I couldn't find a solution for my specific stack of HATs and hardware, I followed the maker’s credo: If you can't find it,…
A remix of the mount created by shteeeb. The delicate mount there always broke for me - Thicker, side-mounted bracket - Mounting mechanism using a rubber band Works perfectly for seated games like sim racing Made for the Apple Dual Knit…
Redesign of ventilation.
Had the Idea to mount a VR headset using an NVG mount for years and finally got around to implementing it. While the end result is functional, the massively increased weight makes it rather impractical as it is quite front heavy, even…
A case for the Pimoroni Inky Frame 7.3 color e-ink display with a Lipo Amigi Pro charger as well a 1500mah lipo battery. Uses 3mm and 2mm threaded inserts. BOM: 1x Pimoroni Inky Frame 7.3":…
Update 15.01.2023: Added the f3d design file of this design. I am working on a new parametric design which should fit the Inky Frame 4 as well! Fiddling around with better snap fit, screws with nuts or screws with inserts. If you have a…
Features Low Profile: Thinner walls and a sleek front bezel for a modern look. Button-Free Sides: The side button cutouts have been removed for a cleaner, solid frame aesthetic. I made this specifically for my Tempest Weather dashboard ,…
No special print settings, I have printed approximately 40 of these for School… case works well with multiple students working on them.
Raspberry Pi 5 PCIe Sleeve Style Case for Pimoroni NVMe base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. The case comprises the sleeve case top and bottom sections, sd end and usb end panels, 4x…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
A remix of the Raspberry Pi 5 case, to support a Pimoroni NVMe hat mounted to the underside of the board.
A simple bracket to allow mounting of the Pimoroni Galactic Unicorn LED panel on an Ikea Skadis pegboard, print lying on the side so as to need no supports. You'll need 4 M2x6mm screws to attach the Galactic Unicorn board, then it'll just…
After many requests from our community, we’re happy to finally share the 3D printing files for the Pimax Crystal.
Das sind die DMAS Audio Booster zum selber Drucken. Für Bambu Studio oder Orca Slicer habe ich extra zwei Dateien erstellt damit man das einfach drucken kann. MRTV Review. Ich empfehle auch "110mm" Gel Ohrpolster die man bei Aliexpress…
