Wyniki wyszukiwania: pnp

Sortowanie

127 modeli

P
PrintablesSebWer

The Night PnP - tokens tray + tokens

As per my need I have designed tokens tray and tokens bases for my The Night boardgame PnP version. Printed mutlicolor with single nozzle. It requires spool 3 times to be manually changed. Attached gcode for PETG with manual spool change,…

Pobrania
8
Polubienia
2
Ocena
0
P
Printablesjazzychad

Lumen PnP Passive Drag Feeder

The Gears and Spacers should be printed in high detail (recommend 0.1mm layer height). The Feeder can be printed in 0.2mm or 0.3mm layer height. No supports are needed, but I highly recommend printing with a very large brim to keep the…

Pobrania
448
Polubienia
19
Ocena
3
P
PrintablesERIK3DP

Menlu Strip Feeder 8mm/12mm for LumenPnP

Even though I liked the minimalistic design of the original LumenPnP strip feeders, they had some difficulties with both thicker paper tape (like 1.2mm thick with more bulky capacitors) being hard to push all the way through as well as…

Pobrania
390
Polubienia
23
Ocena
5
P
PrintablesStargirl

LumenPnP V3 passive drag feeder

This is a remix of Jazzychad's passive drag feeder design updated to work with the LumenPnP V3. V3 changed the nozzle's z-height which makes it no longer able to reach the previous model's tape. This remix uses a spare 2020 aluminum…

Pobrania
384
Polubienia
20
Ocena
5
P
Printablesschleprocker

Parametric Token Capsules for Board Game Tokens - Orleans, Scythe, PnP, etc

Yet another solution to a problem that doesn't exist… Do you want poker chip feel to your Orleans Board Game Tokens? You don't want to spend $25-$40 for upgraded plastic tokens? You can't find coin capsules that fit your tokens? You don't…

Pobrania
378
Polubienia
79
Ocena
5
P
Printablesqwertymodo

Lumen PnP Ploopy Feeder

This is a remix of the Ploopy Pick-and-Place Feeder that has been modified to work with the Lumen PnP, along with several improvements to the basic mechanisms to improve reliability. Added a mounting bracket for installation on the Lumen…

Pobrania
334
Polubienia
19
Ocena
0
P
PrintablesStargirl

Lumen PNP parametric PCB holder

A parametric PCB holder designed in OpenSCAD to fit snugly into the Lumen PNP staging plate. This allows you to put in your PCB dimensions and generate a holder that will perfectly fit your PCB and hold it at the ideal height. A few…

Pobrania
265
Polubienia
22
Ocena
0
P
Printablesrinthlabs

LumenPnP Clip PCB Holder, Feeder Strips, and Nozzle Holder

I designed these PCB Holders and Feeder Strips to clip to the edge of the build plate on the Lumen PNP using 0.75" binder clips. This design allows for both the feeder and the PCB to be mounted anywhere on the build plate. It is only…

Pobrania
247
Polubienia
11
Ocena
0
P
PrintablesStephen Hawes

Passive 8mm Feeder for LumenPnP v2

This design has worked well in some testing, but has not been fully vetted! Your mileage may vary across tape types and thicknesses.

Pobrania
247
Polubienia
16
Ocena
0
P
PrintablesPixiePlacer

PixiePlacer OpenPnP Pick and Place Machine SMD Components

Welcome OpenPnP Community to the PixiePlacer Wiki! The PixiePlacer is a DIY Pick and Place Machine for SMD Components based around the amazing software OpenPnP. The machine is designed to be low cost and suited towards mid-scale…

Pobrania
241
Polubienia
22
Ocena
0
P
PrintablesStargirl

LumenPnP linear rail mods (V3)

NOTE: This is for the V3 LumenPnP. If you're currently using V2, you'll just need to print a few additional parts which are listed below. This mod provides a minimalist set of parts for upgrading the LumenPnP X & Y axes from v-slot…

Pobrania
231
Polubienia
20
Ocena
0
P
Printablesrinthlabs

MAX Feeder - OpenPNP Auto Feeder

This feeder is designed to be set up as an Auto Feeder in OpenPNP. I designed it to mount to a Lumen PNP. It uses an Arduino Mega which listens to GCODE sent over a USB serial connection in Open PNP. The Max Feeder Shield can control up…

Pobrania
205
Polubienia
9
Ocena
0
P
PrintablesStargirl

Lumen PNP parametric staging plate

The Lumen PNP staging plate, but as a parametric OpenSCAD design. This allows you to easily generate customized staging plates - without the camera mounting holes, double the height, different grid spacing, etc!

Pobrania
189
Polubienia
8
Ocena
0
P
Printablescalipsoii

LumenPNP ReferencePushPull Feeder Modifications

This is a collection of 3D-printable parts that can be added to a LumenPNP v3 pick-and-place machine to allow the use of Mark Maker's (makrzone) ReferencePushPullFeeder feeder. I've had very good success with these feeders and I really…

Pobrania
175
Polubienia
11
Ocena
0
P
Printableslixielabs

LumenPNP Secondary Fiducial Rig

This modified version of the Datum PCB mount allows for 3D calibration using a second fiducial mark! You can find the necessary PDF for the second mark on the OpenPNP wiki here:…

Pobrania
172
Polubienia
12
Ocena
0
P

Twisted Cryptids (PNP) Drop Bear, Kelpie and Kraken 'Meeples' (FanModified)

For the Game: Twisted Cryptids, by Unstable Games PnP Meeples: Drop Bear (Elegoo Baby Blue - https://a.co/d/gRwb1D1) Kelpie (Elegoo PLA Sea Green - https://a.co/d/9v5i8Ad) Kraken (Sunlu PLA Pink - https://a.co/d/0HzYzns) Also included is…

Pobrania
170
Polubienia
13
Ocena
0
P
Printablesjm

Camera Focus Adjustment Tool for Opulo LumenPNP v3

Based on the original design by Cor van Doorn. Opulo moved the cameras in Z between v2 and v3 machines. These tools provide reach to access the recessed Bottom Camera, and also allows for adjustment of the Top Camera when using my 4mm Top…

Pobrania
168
Polubienia
7
Ocena
5
P
PrintablesPaul Poley

Miata NB ('99-'05) MegaSquirt mounting brackets - MSPNPPro (MS3)

The MS3 does not mount to the stock ECU mounts on an NB Miata (mine's a '99). Recommend printing with: ABS filament Fill density=30%+ Perimeters=3+ With supports These originated from Risi_turbo's MS2 mounts from…

Pobrania
167
Polubienia
18
Ocena
0
P
PrintablesKevin Levy

Boardgame Designer's PnP Stencil

This stencil provides many of the common shapes and designs needed when crafting and designing board game prototypes. Whether you're an aspiring designer or a print'n'play enthusiast, this will help you create tokens, tiles, and game…

Pobrania
166
Polubienia
65
Ocena
0
P
Printablescalipsoii

LumenPnP v3 12mm drag feeder

Update 2023-07-04: Added an “XL” version of these feeders that is 30mm longer. This allows you to use them close to the home position at 0,0. The gears on the normal length feeders sit directly beneath the nozzle homing position and can…

Pobrania
162
Polubienia
12
Ocena
0
P
PrintablesGrant W

LumenPNP - SMT Cut Tape Holder

This is an SMT cut tape holder specifically designed for the LumenPNP. The provided STL is for an 8mm SMT strip. There is also a *.step file that can be extruded wider to accommodate wider tape. There is an optional slit in the top of the…

Pobrania
154
Polubienia
11
Ocena
0
P
Printablesqwertymodo

Lumen PnP Tool Holder/Discard Cup

Rail-mounted tool holder for the Lumen PnP, for a more rigid mount than the original plate-mounted model. Includes a removable component discard cup.

Pobrania
139
Polubienia
8
Ocena
0
P
PrintablesERIK3DP

Menlu Flexible PCB Board/Panel Mount for LumenPnP

This is a flexible mounting system for pcbs/panels onto the LumenPnP pick&place machine. It's composed of a base mounting plate with fixed brackets for one pcb corner plus movable support sliders for the remaining pcb edges. A grid…

Pobrania
125
Polubienia
13
Ocena
0
P
PrintablesNORCAL 50

Menlu 8mm to 32mm Strip Feeder + Magazines + Discard Bin for LumenPnP

CHANGES FROM ORIGINAL: Added 16mm, 24mm, & 32mm Menlu Strip Feeders. Updated all feeders to work with EIC-481-C standard max component heights. STEP FILE instead of STL Update 8/4/2025: Added top camera compatible Menlu-EH (extra high &…

Pobrania
111
Polubienia
4
Ocena
0
P
PrintablesAndrew Ortman

Custom CP40-Capable SMT Nozzles for Lumen PNP

Hi all! I struggled with OpenPNP vision pipelines with the standard black-oxide coated CP40 nozzles. With the bore being low contrast, even runout calibration could sometimes prove difficult. The way I resolved this was by developing a…

Pobrania
109
Polubienia
8
Ocena
0
P
PrintablesCor van Doorn

Lumen PNP Lens adjustment tool

A small tool to grab the camera lenses for adjustment. Print in 100% infill transparent filament to have minimal to have minimal blockade of the ring lights

Pobrania
102
Polubienia
6
Ocena
0
P
Printablesjm

LumenPnP Power Switch Mount

This design adds a simple SPST power switch for the Opulo LumenPnP Pick-and-Place machine. The switch mount attaches to the left side of the machine, and bolts to the 2020 extrusion on that side. Designed to utilize this switch:…

Pobrania
100
Polubienia
7
Ocena
5
P
Printablesdgoodlad

LumenPnP v3 CP40 Nozzle Holder Flange (40mm)

Based on the flange design by @qwertymodo, I modeled a press-fit model to more completely fill the bottom vision's field of view. It's 40mm in diameter, and best printed in ABS/ABS+ for its matte texture. I've printed in black so far with…

Pobrania
100
Polubienia
3
Ocena
0
P
Printablesqwertymodo

Lumen PnP Strip Light Ring Mounts

These are ring light mounts for the Opulo Lumen PnP that utilize standard 5V 5050 LED strips instead of the custom ring light boards designed by Opulo. A standard 3-pin JST-XH (2.5mm) header can be press-fit into the model and soldered to…

Pobrania
99
Polubienia
20
Ocena
5
P
PrintablesDK

voopoo pnp dust cover

i designed this dust cover for the voopoo pnp pod, stil need to test print this, i am waiting on my flex fillament to arrive to print this Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200…

Pobrania
98
Polubienia
11
Ocena
0
P
Printablesruudwes

OpMenlu stripfeeder for the LumenPnP

It is the Menlu stripfeeder of @ERIK3DP_1763971 but remixed into the Opulo formfactor so for OpMenlu.. These feeders push the strip upwards clamping them down so components don't jump out. Compared to other strip feeders these are the…

Pobrania
94
Polubienia
12
Ocena
5
P
PrintablesStargirl

Lumen PNP linear rail mods

NOTE : This is for V2 of the LumenPnP. If you have a V3 or want to upgrade your V2 to a V3, go to the V3 mod . Minimalist parts required to convert the LumenPnP from v-slot rollers to linear rails. This preserves the overall dimensions…

Pobrania
90
Polubienia
9
Ocena
0
P
Printablesdotmakes

Black Sonata PnP deduction tokens & player pawn

Here's some components to replace the paper versions from the Print and Play version of the game: 7 deduction tokens and a player pawn with a silhouette of the Bard himself. If you haven't heard of Black Sonata, it's a solo deduction…

Pobrania
87
Polubienia
10
Ocena
0
P
Printablesqwertymodo

Lumen PnP Slim Reel Hanger

16mm wide passive reel hanger for the Lumen PnP. Intended for use with the parametric strip feeder FDM-9002, modified by setting the HolderW parameter to 8.0.

Pobrania
86
Polubienia
11
Ocena
0
P
Printablesmartin_pihrt

PNP NEODEN YY1 tray D2PAK

Tray for neoden yy1 mounting machine for D2PACK components (15 pcs). When printing, it is necessary to insert 2 neodyne

Pobrania
86
Polubienia
10
Ocena
0
P
PrintablesERIK3DP

Menlu 8mm/12mm Cut Tape Holder for LumenPnP

I wanted to get rid of the overhanging cut tape strips at the front of my LumenPnP pick and place machine. I found two existing designs here but those did conflict with the LumenPnP feeder slot harness for the Photon Feeders of the recent…

Pobrania
83
Polubienia
8
Ocena
0

Dual X-axis linear rails for LumenPnP v3

To increase the rigidity of the LumenPnP (v3) toolhead, I decided to modify Stargirl's excellent linear rail mod ( https://www.printables.com/model/278803-lumenpnp-linear-rail-mods-v3 ) to support dual linear rails for the x-axis. This…

Pobrania
81
Polubienia
8
Ocena
0
P
Printablesdgoodlad

LumenPnP Rail-Mounted Tool Holder

This is the original LumenPnP V3 nozzle rack model, modified to mount on the front rail of the machine. This improves stability, and reduces strain on the staging plate. The design is based off of that of @qwertymodo, which was for the…

Pobrania
79
Polubienia
8
Ocena
0
P
Printablesqwertymodo

Lumen PnP Mean Well Power Supply Mount

Mounting bracket to attach a Mean Well LRS-350-24 power supply to the bottom of an Opulo Lumen PnP, with space for a switched and fused mains inlet.

Pobrania
78
Polubienia
6
Ocena
0
P
Printablespemlik

Ortofon 2M PnP Headshell Cartridge Stylus

Ortofon 2M PnP Headshell Cartridge Stylus Category: Music

Pobrania
76
Polubienia
6
Ocena
0
P
Printablescalipsoii

LumenPNP v3 Drag Feeder Tape Hook

Keep your components neatly coiled beneath your existing drag feeders with this minimal print. It inserts snugly into the M5 screwhole and requires no modifications to your feeders. Say goodbye to big loosely hanging coils of components!…

Pobrania
75
Polubienia
7
Ocena
0
P
Printablesqwertymodo

Lumen PnP 8mm Reel Holder

Passive hanger to hold 8mm tape reels for use with strip feeders on the Lumen PnP. The total width is 16mm, so the parametric strip feeder needs to be modified to match.

Pobrania
72
Polubienia
13
Ocena
5
P
Printableslgndns

Voopoo PNP X DTL Drip Tip

Replacement tip for the Voopoo PNP X pod (tanks), use the o-rings from the old one or just put a little dot of superglue

Pobrania
69
Polubienia
2
Ocena
0
P
Printablesreesesm

Staging Plate Nut Holders for Lumen PnP

If you have cleared off the underneath of your build plates, you can fill these holders up with M3 nuts (example from AliExpress here ). You will need to use the 4 corner holes (or others that work best for you) to attach the holder under…

Pobrania
67
Polubienia
2
Ocena
0
P
Printablesjm

LumenPnP: Discard Bin

An accessory for the Opulo LumenPnP, this little bin magnetically attaches to the front edge of your staging plate to catch any parts Lumen decides to discard. The part is designed to press-fit “8x3mm”-nominal round magnets, but the parts…

Pobrania
67
Polubienia
5
Ocena
0
P
PrintablesPlavatos

Two Rooms and a Boom - Rugged Box for PnP

Two Rooms and a Boom - Rugged Box for Print 'n Play storage Here's my attempt at a very thematically appropriate box to store all of your Two Room and a Boom PnP cards. I used 110 weight stock paper and Ultra Pro Gaming Sleeves (82712).…

Pobrania
63
Polubienia
6
Ocena
5
P
Printablespiotr12345b

D6 Dice for PnP Stickers

Solid dice shall be printed with 100% infill. Hollow version is designed to reduce the weight of the dice. Print on 3 layers of raft + support for the bottom sticker wall. See pictures for reference. There is place for 10mm rectangular…

Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesMartin Vítek

LumenPnP Discard Bin Press In

An accessory for the Opulo LumenPnP, this bin for discarded components can be press-fitted to the front edge of the staging plate.

Pobrania
61
Polubienia
4
Ocena
0
P
PrintablesL3M4R

L4M4R PNP Canopy for Walksnail 1S V3 VTX board and Radiomaster RP1 RX

Universal Walksnail VTX and RX PNP canopy for multiple frames Use ABS other strong material to print, but works fine even with PLA or PETG (it is your own risk and responsibility). I'm using the same Canopy having VTX and RX for several…

Pobrania
59
Polubienia
8
Ocena
0
P
Printablesjazzychad

LumenPnP Adjustable Staging Plate Foot

Printed using 0.2mm layers with PLA. Print the LumenFootBody upside-down. It should not need supports. Screw the jam nut all the way down the bolt, then insert the bolt into the body. Attach the body to the Lumen under the bottom…

Pobrania
56
Polubienia
5
Ocena
5
P
Printablesmartin_pihrt

PNP NEODEN YY1 tray BUTTON 6X6

Tray for neoden yy1 mounting machine for button components (15 pcs). When printing, it is necessary to insert 2 neodyne

Pobrania
56
Polubienia
7
Ocena
0
P
Printableshvraven

LumenPNP discard bin

Simple discard bin which is held in place by latching onto the screws used to mount the bottom camera. The bin only goes around the screws and can be easily removed without any tools.

Pobrania
55
Polubienia
5
Ocena
0
P
PrintablesAndrew Ortman

LumenPnP Revised 8mm reel holder

LumenPnP's automatic feeders are a game changer. However, the reel holder didn’t play nice with the Mouser or Digikey reels I got. It didn't snugly fit as shown in their docs. So, here's a remix of that design with some handy…

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesAlraska91

Tolerance Test PnP

Hello Printers, you want to create your own design? But you don't know which tolerance to use? THIS is the test to find out! It comes with some basic measurements on contour and some buildings (including little bridging tests) and also…

Pobrania
51
Polubienia
5
Ocena
0
P
Printablesqwertymodo

Lumen PnP Mount for Uxcell Solenoid

The official Opulo Lumen PnP BOM calls for a solenoid valve which includes threaded mounting holes, which are used for the mounting bracket designed by Opulo. This mounting bracket is meant to hold the “uxcell Miniature Solenoid Valve 2…

Pobrania
49
Polubienia
4
Ocena
0
P
PrintablesPapaJ

LumenPnP Board Mount Tools

I have a really small board 25mm x 25.4mm and needed some board clamps that didn't go under the board (reverse of what ships with the LumenPnP). So I made these for grabbing on to small boards. M3 through holes mounts on 30mm centers.…

Pobrania
47
Polubienia
7
Ocena
0
P
Printablesqwertymodo

Lumen PnP Y-Axis Drag Chain Mount

This is a mounting bracket to install a wiring drag chain for the Y-axis of an Opulo Lumen PnP. This mod is NOT compatible with the official Lumen kit wiring harnesses, because the harness routing is considerably longer, however, I…

Pobrania
46
Polubienia
6
Ocena
0
P
Printablesqwertymodo

Lumen PnP Solenoid Actuator Mount

This is a modified head mount for the Opulo Lumen PnP machine that allows head-mounting a solenoid actuator for use with mechanically actuated feeders, such as drag feeders or my modified Ploopy Feeder . If you want to have the right head…

Pobrania
45
Polubienia
5
Ocena
0
P
Printablesdavrex

LumenPNP Drag feeder

Drag feeder that fits on the lumenpnp with reel holder

Pobrania
44
Polubienia
6
Ocena
0
P
Printablesrinthlabs

Lumen PnP 550mm Linear Rail X Axis Mod - v4

This allows you to use a 550mm linear rail which is easier to source than the stock 525mm rail.

Pobrania
43
Polubienia
3
Ocena
0
P
Printablesqwertymodo

Lumen PnP 360mm Staging Plate Feeder Rail Mod

These replacement front legs for the Lumen PnP allow the front feeder rail to be moved forward by 30mm, allowing enough room for the official feeders to be mounted on both the front and rear rails with a 360mm staging plate. The original…

Pobrania
43
Polubienia
2
Ocena
0
P
Printablesqwertymodo

Lumen PnP Linear Rail Mod

This is a minor remix of Stargirl's linear rail mod for the Opulo Lumen PnP machine. This remix doesn't change the final geometry at all, it only makes changes to the assembly hardware, to eliminate self-tapping bolts into plastic parts.…

Pobrania
42
Polubienia
6
Ocena
0
P
Printableslifeisafractal

LumenPNP - SMT Cut Tape Holder - 12mm

From original model (modified to reference 12mm): This is an SMT cut tape holder specifically designed for the LumenPNP. The provided STL is for an 12mm SMT strip. There is also a *.step file that can be extruded wider to accommodate…

Pobrania
40
Polubienia
5
Ocena
0
P
Printableslifeisafractal

LumenPnP Revised 8mm reel holder M3 heat set

I included the 3mf file too so you can open it up in Prusa Slicer and adjust the hole size for different bolts or inset sizes. From the original: LumenPnP's automatic feeders are a game changer. However, the reel holder didn’t play nice…

Pobrania
40
Polubienia
3
Ocena
0
P
Printablesjm

Top Camera Spacer for LumenPnP with v3 linear rails

After installing Stargirl's awesome v3 linear rail upgrade and converting other parts of my machine to use the updated V3 LumenPnP parts, I found that the top camera lens was VERY close, if not touching, the nozzle rack. The nozzle rack…

Pobrania
39
Polubienia
2
Ocena
0
P
PrintablesMCJ0nas
Pobrania
39
Polubienia
5
Ocena
0
P
PrintablesAdrianM.

DYMO LabelManager PnP – 9V Battery Adapter (Printable Emergency Power Solution)

This 3D printable adapter allows you to power a DYMO LabelManager PnP using a standard 9V battery , as a direct replacement for the original internal rechargeable battery. If your original DYMO battery is no longer working or holding…

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesZeSneakyNinja

01-05 Miata MS3PnP Mounting Bracket

Lower mounting bracket to locate a MegaSquirt MS3 ECU in an 01-05 Miata (this may work on a 1999-2000 NB1 however I don't have one to test.) Two versions, one without a hole for a bolt of ziptie to secure the ECU (0105MiataMS3Mount.stl) ,…

Pobrania
37
Polubienia
10
Ocena
4
P
PrintablesCorey

Under Fallen Skies PnP

Under Falling Skiles is a solid solo Print and Play game ( https://boardgamegeek.com/boardgame/273779/under-falling-skies-9-card-print-and-play-game ). I enjoyed playing the game with the 3D components. In this entry, bring together what…

Pobrania
37
Polubienia
3
Ocena
0
P
Printablesrinthlabs

Dual Vacuum Pump Mount for Lumen PnP

This vacuum pump mount allows you to replace the rubber bands holding the vacuum pumps without removing the mounts from the staging plate. This model has modeled in supports that can be easily cut or snapped off after printing.

Pobrania
37
Polubienia
4
Ocena
0
P
PrintablesCândido Neto

LumenPnP Strip Feeder Extension Support

This is a support that should be attached to the v-slot y-axis, making it possible to use longer strip feeders (or two strip feeders tagged along). I've designed a general model, and four specific variants that fits the blade teeth,…

Pobrania
36
Polubienia
3
Ocena
0
P
Printablespemlik

Music Hall Tracker PnP Headshell Cartride Stylus

Music Hall Tracker PnP Headshell Cartride Stylus Category: Music

Pobrania
36
Polubienia
4
Ocena
0
P
Printableshvraven

LumenPNP 8mm feeder alternate spool mount

The original spool mount of the feeders were too narrow for the spools I got, also they slipped out very easily when moving the feeder. This mount encloses the spool on both sides, preventing accidents when moving the feeder. The design…

Pobrania
36
Polubienia
2
Ocena
0
P
PrintablesRom Ben Chaim

articulated snake low poly pnp

this model is made by Rom Ben Chaim

Pobrania
35
Polubienia
3
Ocena
0
P
Printablesvbretsch

Motherboard cover bottom and top for lumen PNP mobo v3

This is a cover for the lumen PNP's v3 motherboard, which does fit the reset and boot buttons on the motherboard.

Pobrania
32
Polubienia
3
Ocena
0
P
Printablescalipsoii

LumenPNP CP40 Nozzle Vision Shields

These little vision shields can be press-fit onto standard CP40 pick-and-place nozzles to aid in machine vision. Tested and work perfectly on my Lumen PNP but likely to work with any other pick & place machines that use CP40 nozzles. To…

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesPapaJ

Lumen V3.1 Open PNP Nozzle Rack on Rail with Part Catch

Tested on my Lumen v3.1.2 Open PNP Machine I've combined features of two models. The model is primarily based on the model by dgoodlad but then I picked up the parts catcher feature of the qwertymodo model. The included discard cup is the…

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesPapaJ

22 x 8mm x 90mm Strip Feeder for Opulo PNP

Parametric Open SCAD files here on github: https://github.com/pontech/parametric-strip-feeder !!! WARNING !!! I don't use this feeder anymore. I've switched to Menlu style feeders because they much easier to deal with and protect parts…

Pobrania
28
Polubienia
0
Ocena
0
P
PrintablesGeoSaffer

LumenPnP Cable Chain (IndexPnP)

Cable Chain made for Index Pick and Place machine Print Settings Printer: Custom Rafts: No Supports: No Resolution: 200 Infill: 30 Filament: 3DEA PLA Black and blue Category: Other

Pobrania
28
Polubienia
5
Ocena
0
P
PrintablesDavid Kuder

LumenPnP MGN12 X Gantry Front and Toolheads

Modified version of X-Gantry and Z-Toolheads from LumenPnP-STLs-v3.1.2 for 4-hole MGN12 linear rails.

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesCthulhuLabs

LumenPNP Staging Plate Support

This is a replacement for the two support center support legs for the LumenPNP. It replaces them with three 20x20 extrusions and a few standoffs. You will need M5 bolts and drop in T-nuts for the 20x20 extrusions.

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesPapaJ

LumenPnP Klingler Style Single Material CP40 Tool Holder

This a CP40 tool holder for LumenPnP/OpenPnP based on this work: https://github.com/richardklingler/openpnp/tree/master/openscad/toolchanger I've combined all the layers so that can be easily printed with a single material. Printed with…

Pobrania
24
Polubienia
1
Ocena
0
P
Printablesredactd

Lumen PnP - RPPF Lever

Lumen V3 Z Gantry modification to support the RPPF. https://makr.zone/new-all-3d-printed-tapereel-feeder/399/

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesGrgrs

PnP TEG Player set

One set of player pieces for Print 'N Play Tiny Epic Galaxies. Print at 150% for nice sized pieces. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6AczZyREINl Print Settings Printer Brand: Monoprice…

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesRuud W

Top Camera Spacer for LumenPnP with v3 linear rails with 4x m2 bolts for the cameramount

I ran into the same problem that the top camera was very low. The spacer by @jm moves the camera up 4mm but i did not have M2,5 bolts that were 4mm longer. So instead i used some random M2 screws (they can be sourced from an old laptop or…

Pobrania
23
Polubienia
1
Ocena
0
P
Printablesjkoelker

LumenPnP Drop in Discard

A circular discard cup that fits in the staging plate center holes.

Pobrania
22
Polubienia
2
Ocena
0
P
Printablesdav88

chip clip pnp

this is an easy to release version of my earlier version i also made changes to make printing in place easier can now accommodate three thicknesses.

Pobrania
20
Polubienia
1
Ocena
0
P
Printablesmmalecki

LumenPnP secondary fiducial PCB rig

Mount a smaller version of the LumenPnP's datum board, without moving the primary fiducial, to enable 3D calibration. This is second revision of this model, moving the secondary fiducial to OEM secondary fiducial location, removing the…

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesDust

Lumen pnp v4 printable x-cable-chain-support

Lumen PNP V4 x-cable-chain-support split into 3 parts for printing. The original part is 655mm long, sadly for most of us this is to large to print as one part. I split it into 3 parts with joining tab, so it is printable on a smaller…

Pobrania
19
Polubienia
1
Ocena
0
P
Printablessp_cecadet

Simagic pedal shaker(pnp-hpr) to thrustmaster tp3lc pedals

Mount your Simagic shaker to your thrustmaster tp3lc pedals No nuts or threadserts needed. Uses included shaker hardware. Attach the printed part to the shaker using the shakers included adapter plate and hardware. Slide the mount over…

Pobrania
19
Polubienia
5
Ocena
0
P
PrintablestoonM

Lumen PNP Leg extension

Printed in PETG, is holding up well for me, designed to be able to print on 150mm build plates I insert a heat insert in the existing camera and plate support so that I can screw the extensions into it. (5mm bolt)

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesRadek_Pulkrabek

Rolling Realms box for PNP version

Hi, I have created my own model for Rolling Realms. What can fit inside: 2x stacks of cards 7cmx11cm and 2,5cm height 2x standart D6 dice 6x centropen fix 13,5cm lenght Rolled up rules 18,5cm lenght Model on photos includes one design…

Pobrania
18
Polubienia
2
Ocena
0
P
Printablesnem

LumenPnP Discard Bin for in front of Camera - pressfit

Pressfit bin for the lumenpnp machine

Pobrania
18
Polubienia
1
Ocena
0
P
Printablesammcu

Alternative Housing for Core One Innomaker PnP USB Camera

This is a remix of the main housing of @Rainer's Core One ESP32 Camera Case. I was looking for a USB Plug-&-Play solution for my Core One to connect straight to my Octoprint Raspberry Pi. I didn't like the ESP32-CAM module so I decided on…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesMagpie

LumenPnP Mobo Protection Plate

This simple plate is protecting your LumenPnP (Opulo) motherboard from electronic components that could fall down thru the holes in the staging plate and cause short circuits or other issues with the circuit. It's 100x100mm big and has…

Pobrania
17
Polubienia
1
Ocena
0
P

Atomizer case PnP 4.5ml

Atomizer case PnP 4.5ml. Robusto e Leggero da trasportare in giro. Protegge l'atomizzatore da cadute accidentali. Dotato di una gola per il posizionamento di una guarnizione, per isolare l'atomizzazore completamente dall'esterno. Link al…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesJustin Sweitzer

3.5" Drive Carrier for PnP Drive Bays

This is a carrier for a 3.5" hard drive that slots into a standard 3.5" hotswap drive bay. I think that the case I designed it for is a CoolerMaster, but it should work with other cases. I've included the CAD files in case it need…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesNORCAL 50

LumenPnP Jogpad Keys

PARTS LIST: Epomaker EK21 (I have no idea what the difference between the Zebra and Wisteria switches are, so good luck.) 3D Printed LumenPnP Jogpad Keys Optional: USB Extender , only needed if you're running out of USB ports like I was.…

Pobrania
15
Polubienia
6
Ocena
0
P
PrintablesPaulWaterReNu

200mm legs for lumen pnp

Just use 3/8" all thread and lock nuts to hold the lumen down to the desktop. Solid as a rock! Plenty of room underneath for reels / reel holders. We have 54 feeders on our Lumen PNP (and some more to come).

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesAsadxon Akralov
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
13
Polubienia
2
Ocena
0