2936 modeli
Inspired by the design on tinkercad by örjan https://www.tinkercad.com/things/ejnXN5An6ae And by the design by Polestar itself for a protective snow cover for the chargepoint I designed this. The portrusion is meant to keep snow mostly…
Perfect for making a rack for your clothes or fillament roles Further scalable in the slicer
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
Stackable moss pole with leaf pattern ideal for climbing houseplants. The pole comprises three parts - the anchor, the main pole and the cap. The cap is not necessary, but it closes the pole nicely. All the parts are connected by bayonet…
PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…
Attach Ski Poles together for better transport
After trying other similar designs, I found it hard to get the thread print clean. This design is done for a extension pole set where the two sections are 31.5 MM and 28.7 MM respectively. It should be scalable to other diameters. The…
You can stack up multiple modules on top of the ground anchor and optionally add moss inside the modules for plants which need the moisture. I recommend to print in PETG. The module should be printed with the detents up or with brim…
The original baskets for my Black Diamond ski poles did not fit. These are replacements in two different sizes. They swivel 24° perpendicular to the pole axis to allow for a better experience when walking uphill. They are fixed in place…
Clip for a pool skimmer net. It's usefull for fastening a pool skimmer net into a pole. But could be usefull also for other appliances… EDIT: added parametrized version… you can change any length, diameter parameter in Fusion 360 “Change…
Converter that fits Australian painters pole thread to a standard 5/8th 11 thread used by surveying equipment. A painters pole is a cheap alternative for extending your radio aerial nice and high. Print instructions I have had success…
A simple pole clamp for the system so I could attach my ring light directly to my desk.. The pole that it currently attaches to is 35mm in diameter. Printed in Overture Matte Black PLA with a raft and supports on the build plate. Hardware…
This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.
Ich habe eine kleine Klammer konstruiert, welche die Einzelabschnitte der Moosstange zusammenhält, damit diese sich nicht so einfach auseinander drehen. Es gibt sie in zwei Varianten. Eine sehr einfache (simple_clamp) und eine Zierklammer…
This reduce the chance of snow building up around the charging plug. Printed mine in PETG-CF.
Coat of arms - Napoleon (France) Znak - Napoleon (Francouzské císařství)
This is a storage solution for the classic wargame Command and Colors Napoleonics from GMT games . As the game has three different piece sizes, I have divided them in three trays: Infantry : 180 pieces Cavalry : 77 pieces Artillery and…
Download the required hook from here: https://cults3d.com/en/3d-model/various/polestar-2-cup-holder-mroek
Ich habe einen Moosstab entwickelt bei der man eine transparente Folie auf die Rückseite befestigen kann. Dadurch kann man die Wurzeln im Moosstab erkennen und gleichzeitig wird das Moos langfristig nass gehalten. ich habe die Folie…
This is an adapter, to use a pole with cone threaded connector (as e.g. the Vileda ones) with the M24 connection mops, commonly used in Greece. It is a combination of the “ Vileda Mop rod, Coned Thread Connector” designed by Skaran (…
This model is designed to be used to convert trekking poles into a GoPro selfie-stick or extension for filming in the back country! Easy to print, light weight, and functional. Everything necessary for long trips. The only non-printed…
For safe mount base station without tribrach. Mount for Leica pole (GLS12 or GLS13, 25mm diameter) and Leica tripod (GTS102-9, 60mm hole). Print settings: material: PETG nozzle: 0.4mm layer height: 0.2mm perimeters: 4 top/bottom full…
This is a simple support made to assemble those items easily: Mission Torus 100 (https://www.missiondarts.com/dartboards-c84/dartboard-lighting-c109/mission-torus-100-folding-portable-travel-light-p1668) Gran Pole support…
Funkamateur MiniWhip encloser to be used on a fishpole. Diameter hole for fishpole is 5.5mm Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm…
Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…
Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…
Print using default “.2 mm speed” setting. Assembly Insert the 3 feet through the openings in one of the base pieces. pull until they are sitting flush (sits 1mm above lip). Gently bend the main body at the seams while pushing into base…
Print in something non-brittle (that means: no PLA) and slip two o-rings into the grooves near the edge, like in the photo. Stick on your pole tips to keep them from scratching your stuff during transport.
Sculpted totempole bird with wood grain texture. All my models are free to download and remix. If you appreciate them, please leave a download and a like!
Das Windspiel basiert auf zwei gegenläufig rotierenden Rotoren, die jeweils in entgegengesetzte Richtungen drehen – einer im Uhrzeigersinn, der andere gegen den Uhrzeigersinn. Eine Windfahne, die hinter den Rotoren montiert ist, sorgt für…
This allows you to mount up to two IKEA TERTIAL lamps onto a 88mm (3.46inch) diameter pole commonly found in basements. I've found it a convenient way to add extra, directed light to my work table while keeping the lights out of the way.…
Use these brackets and make your own custom racks. 5 sizes available: 8, 9, 10, 18, 22 mm
Connect your PowerPole cables directly to the QCX mini! Additional material required: A barrel connector like this one: https://www.reichelt.de/hohlstecker-ohne-knickschutz-aussen-5-5-mm-innen-2-1-mm-hsw-21-9-p8664.html 4 M2.5 screws 16mm…
Polednice 20 cm (two colours) Wall art or teplate for frottage or matrix for graphics
My wife had a plastic bracket break that held her clothes' rod to the above shelf. So I made one from the old one out of PLA. I used PLA mainly because I had gray and that is what the others were. It works very well. I made this about…
So the wife wanted a closet pole mounted in the 30" gap between the two cabinets I hung in the laundry room during a recent remodel. One catch however, “I don't want holes in the cabinets in case I want to take it down." she said. A…
This free miniature moss pole is designed to support your small plants as they grow upward, preparing them for a larger moss pole in the future. If you enjoy this model, please leave a like and download it! Once you've printed it, don't…
Extra hook for storage that fits on the ladder poles. Supported by Romsdalen 2.0 rooftop tent ladder, but it should also fit similar ladders. This hook fits below step 2 and 3 counting from top, where the poles are 40mm and 44mm. The…
I don't keep my power supplies mounted to the back of the enclosure, but needed a way to quick-disconnect from the printer. Slanted connection keeps it out of the way of the heat bed cable. Requires one pair of Anderson PowerPole…
This is a PoleMaster connector for AstroTrac 360 mount. It requires following 2 items for assembly: My “Dovetail saddle for AstroTrac 360” ( https://www.printables.com/model/528477-dovetail-saddle-for-astrotrac-360 ) & “Ultra mini compact…
I Made this design to create a cover for the protection of the flagpolepipe in the ground.
Studenti si podle předlohy vytvoří model sestavy držáku nepájivého pole, který si poté na 3D tiskárně vytisknou a osadí komponentami. Model budou používat pro realizaci elektronických zapojení v OV.
A quick break from my usual stuff to get a few teachers mad at me. Pencil Polearms is a collection of seven pencil toppers that turn your writing implements into weapons of war. Included are a halberd, poleaxe, double axe, partisan,…
Verleihen Sie Ihrem Indoor-Garten mit dem Moosstab-Set eine elegante und präzise Lösung zur Verbesserung des Wachstums und der Präsentation von Kletterpflanzen. Das umfassende Set enthält einen sorgfältig gestalteten Moosstab – Dieses…
Moss pole You may also liked some of these projects: https://wivry.gumroad.com ------------------------------------------------------------------------------------------------------------- If you want tu support me, you can buy me a cup…
Hello everyone! We have exciting new products for you. With the plant repotting season arriving, we’ve prepared something special. We’ve designed three plant support models in the popular "Bøje' style! They are modular and customizable to…
Stackable Moss Pole v 1.5.1 by MochPoch New Bamboo moss pole system has been released. Click here 🌱 This project came about after a search for a moss pole that has: moisture retention stackability sturdiness reusability The design is in…
Původně určené pro mech, ale ten z lesa může být plný různých brouků, které doma asi nikdo nechce, tak jsem použil sušený Rašeliník Jihoamerický. Modely jsou různě dlouhé, aby je bylo možné vytisknout i na malé tiskárně a jdou kombinovat,…
Cleaning your rain gutter can be difficult if your ladder is too short to reach the roof. Therefore I created a little scoop (or shovel) that can be mounted on a (telescopic) Gardena stick. The angle can be changed in two directions…
Parametric pole holder Inserted metric thread
The small electric pole from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The pole can stand alone or could be glued onto an empty tile that is part of our grid system. Empty tile and…
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- Disclaimer: If you're into skiing, you'll absolutely love this. Just print 2 copies, and say goodbye to the hassle…
This is an adapter I designed to fit in the pole mount that comes with the Starlink Mini that has a ¼-20 thread insert in it to attach to any tripod or other camera mount (ie clamps, suction cups, really anything that uses a ¼-20 screw).…
Some plants need a little extra support, and a moss pole can be a great way to provide that. Moss poles can be expensive, but 3D printing and making your own can significantly reduce the cost and allow you to customize it to your decor…
This is a simple but elegant headphone stand idea I came up with after stumbling across a variation of this “Titanic” pole dancing pose while browsing Pinterest and being fascinated by the anti-gravity look. I wanted a stand design that…
BOM: M3 nut M3 x 16 screw Print in PETG for the best results :)
Modular moss pole for monstera / philodendrons etc to climb (Voronoi version). I created this as an adaptive modular pole that can be increased in height as the plant develops. Each 200mm high section is 80mm dia). The incremental pole…
>> This mod may void the warranty! << >> Modify the radio at your own RISK! << Order a kit: Purchase a kit here: https://forms.gle/EGKaYYa485J8wiMW9 Go here for details: https://github.com/N0BOY/FT891_powerpole Enjoy it! - Jason Wang,…
A modular moss pole with built-in drip irrigation for Monstera and other climbing plants. The pole screws together in sections, so you can extend it as your plant grows. A watering funnel on top lets water wick down through the moss — no…
ein Moosstab der wie ein Mittelalter Turm aussieht
***Updated 11-7-2022 | Now Compatible With 15mm & 22mm Tent Poles | *** Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different…
My coworker had an old rod holder he used for ice fishing. It snaps onto a 5gallon bucket and holds the rod. So I jumped into solidworks and modeled him up a 3d printable version, and printed him enough to last several more years. Hope…
Watering Attachment Options for the Moss Pole ( Original (118mm) & Petit (70mm) ) by MochPoch Decided to separate the optional accessories of the climbing support system so that the original listings are not cluttered. New Bamboo moss…
Hello there, this is a simple to install shower shelf for a shower pole with a 22mm / 0.9in diameter. The file "Schelle" is only needed if the shower shelf is sliding down the pole due to high weight of the stored items. No tools are…
Stackable Moss Pole - Petit 70mm v1.1.0 Smaller version of the Moss Pole by MochPoch New Bamboo moss pole system has been released. Click here 🌱 Licensing If you'd like to support my projects or obtain a commercial license, consider…
Easy print, no supports, fits on a standard bed. This is a replica of a Flock Safety security camera that can mount to a extendable protest sign handle or a dowel or flat stick. Great for plays or content creation about government…
Printed 3D pole mount to mount the Starlink V3 dish to a 28mm pole. Can also be used on a light/speaker stand, like this one: https://www.thomann.de/nl/stairville_bls315_pro_lighting_stand_b.htm Settings I used for printing on Creality K1…
TIGHT FITTING GROW TENT CORNER/SIDE SHELF, FITS 16MM POLES, ROOM FOR ALL YOUR ODDS AND ENDS IN THE TENT, USED THIS FOR HUMIDITY CONTROL DEVICE MOUNT .20 STANDARD PRUSA MK3S+ SETTINGS
Thor-approved variants of soozafone's Pencil Polearms: print as-is, without supports. Uses the same topper piece as the original (included). The socket and layer orientation might cause the fit to be a little tighter than the “open”…
I have a new version ! Ich habe eine neue Version! Ein Moosstab für die spezielle Wuchsart der Monstera Dubia. Kann natürlich auch für andere Pflanzen genutzt werden. Der Moosstab ist steckbar. Habe es mit Support gedruckt. Meine…
Carved from the trunk of an old tree. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Printed with normal Prusment PETG settings and 0.2mm quality layer settings plus extra perimeters if needed and detect bridging perimeters. Hook and Collar do have a correct assembly direction where the internal threads line up. As a…
This is the iconic three tiered pole puzzle Michele Fitzgerald crushed that was featured on Survivor 32 Kaôh Rōng. This puzzle also appears on Survivor 40 Winners at War with some slightly altered pieces. I will be creating a remixed…
3d printed case to DIY build your own dipole antenna. It will fit up to RG316 coax size pigtails.
3-Way Heavy-Duty Tent Corner Connector A reinforced 3-way 90-degree corner connector engineered for tent poles, tarps, and custom outdoor shelter frames. Designed specifically for high-stress applications such as camp kitchens and pyramid…
Half circle moss pole to support plants, primarily their aerial roots. Pole consists of two parts: base and body. Base is intended to go in to soil and body goes on top of that. Body is then filled with moss. Plant sprouts and grows…
NOTE: REV 2 AVAILABLE HERE --> https://www.printables.com/model/1709622-fishing-pole-garage-door-hanger-rev2 BETTER CLEARANCE WITH HINGE PIN OPTIMIZED SPACING FOR SPINNING REELS OPTIMIZED SIZING FOR STANDARD 256mm BED SIZES This is my…
I had this great idea to create some accessories for the excellent Dummy 13 model. Well about half way through I realized someone had already beaten me to it (see https://www.printables.com/model/649568-ski-set and…
Mini 13: Figurine System Compatible Melee Weapon Set, includes 7 weapon designs: Fork Billhook Simple Halberd Simple Spear Pitchfork Fancy Halberd Full Staff
Just glue a threaded rod in the hole witch can help you fasten the parking pole. Grind the surface and paint it with mirror spray.
Replaces original bolts to allow the Gravity Ski Holder to also hold poles. Print on the top face without supports.
Battle stringiness by enhancing retraction and/or wipe, or eliminating Z-hop. At the end of the day, a good quality filament or a very dry one will just not string. The two white prints in the picture are simply befor and after a spool…
Alastor's Staff for cosplayer or collectionists. One version has got a collapsible pole that can be shorten for transportation and one version has got a compact pole. Assembly instructions: Collapsing version: You'll need to print all the…
All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…
I am told there is no standard for paint pole threads, but this fits the two paint poles and the broom handle that I have. This is just a threaded cylinder to use as a starting point for your model. I am including the .stl file and the…
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
An totem pole carved from the trunk of an old tree. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Best printed with PETG for it's flexibility. PLA works too but may be more difficult to snap on the tent pole. I've had luck with infill anywhere between 10-30%. This was designed to print easily with no supports needed. Updated…
🧰 Heavy Duty Closet Pole Sockets A 3D-printable Heavy Duty Closet Pole Socket designed to support standard closet and wardrobe poles. This model provides a practical DIY solution for replacing or creating wall-mounted closet rod supports.…
This winder is a little more Versatile than other iterations, subjectively. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller Toroid for a Choke. Pictured is the dipole as…
Here is for You a modular moss tower ( moss pole). It consists of : - 2 roof segment 75 mm high - 2 variants of midle segments = 105mm high each - 1 base segment = 110 mm high - 1 base cone = 240 mm high - 1 base holder 240 mm Segment…
un corno napoletano pensato per portare fortuna in casa, infatti questo corno puoi tranquillamente poggiarlo nella sua corona e tenerlo su un qualsiasi mobile in casa così da tenere le malelingue fuori dalla portata della famiglia stampa…
Update 26.02.2024 Added Freeride small basket Uploaded beefier snowflake baskets (v5) after breaking some of them Update 01.02.2024 Added snowflake basket It's carnival season 😂 Update 21.01.24 Added various basket shapes and updated…
Small but mighty wall hanger for the Dewalt pole saw/hedge trimmer combo. Print four to hold the pole saw, hedge trimmer, extension, and base kit. No supports are needed for this print. Petg preferred.
+ detect thin walls + 2/3 perimeters + 10% infill Double cupholdeer and arm rest support for the Polestar 2. Cupholders fits 330ml cans and macdonalds cups. At least here in europe :) Built so the armrest can extend over the cupholder.…
These are simple anchors that snap onto the poles of your grow tent for clamping small fans to. These snap fit onto 16mm poles. There are a few version, I was playing around with the shape optimization in Fusion 360. The one named…
Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal
Always wanted to add a easy to print and free catenary system to your model train diorama? look no further. As this is what you want. Consisting of a pole that can be pressed into a foam base by using the pointy bit and a wire support…
Anderson PoperPole connectors are popularly used for Amateur Radio equipment, but for small low power gear the power cables are often small diameter and need some strain relief when soldered to a PowerPole connector. This clip supports a…
