169 modeli
This is a simple, yet very useful design for a all-in-one spotlight. After scouring the internet for simple LED spotlight designs we could use to show off Lego models with simple and easy accessible materials, I came up with nothing. I…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and can easily be converted to economical LED light sources. Compared to halogen spotlights, LED lamps not only have the…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
When I replaced the normal floodlights in my bedroom with smaller LED versions, I found that the original metal rings that came with the fittings were too large. As they are LED bulbs, the plastic won't melt (or hasn't melted yet) and so…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been setting up a macrophotography and video station for some time where I can take shots in a controlled way, but the biggest difficulty I always come across is lighting. Almost always, in this type of photography, global and…
Did this as a remix of my ring stickup baseball cap cover, I've never made this, but... it should work? Category: Camera
remixed to include screw holes for permanent mounting Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: DIY
Remix of the Y-axis link from: https://www.printables.com/model/310284-ender-3-s1-cable-chain Hardware needed: LED light strip (if using the LED light model) M3 x 6mm screw (optional, but strongly recommended) Designed to create…
The otherwise very practical IKEA lamp, for clipping onto a shelf, has unfortunately broken. Both parts of the clamp broke after only a few years and the whole lamp could no longer be used. In FreeCAD I designed a replacement part for it,…
Spotlight GU10 enclosure with interlocking bracket specifally designed for the Philips Donegal line, but might fit other brands Designed for when you want spotlights but do not have enough space between your ceiling and false ceiling.…
Slip on sling style mount with Pic rail attachments
Meine Frau bastelt sehr gerne mit klassischen Papiertheatern und wünschte sich ein Spot für die Beleuchtung von einzelnen Figuren. Daraus entstand dieses Projekt. Der Scheinwerfer besteht aus einer Stützklammer (für die Befestigung an…
This is a small spotlight with an adjustable mount which utilizes 12mm bullet node pixels and is intended for outdoor holiday accent lighting. The pixels themselves are waterproof so it is a rather open design with a large hole in the…
These are the single-LED versions of the spotlight. If you are looking for tri-LED versions, you can find them here . I specifically designed this light fixture for the Phillips Hue GU10 LED bulb. However, it should also be suitable for…
Light up your skadis board with this mount for IKEA Mittled LED Spotlights. Perfect for workstations or displays on your skadis board. Mounts from the back of the skadis so that the lamp can shine over the front of the skadis board. Has…
I've got a few landscape spotlights that produce an annoying glare when walking by them. Searching a bit, I found the solution to the problem was to place a louver (or louvre) between the bulb and the lens of the spotlight housing. Many…
A simple hanger for your Ring Camera that requires no tools to mount either the camera or the mount. The base of the camera just slides into the mount, which can then hang over a glass balustrade, wall or anything else you like! Print…
Info about develpment of this can be found here: https://pinside.com/pinball/forum/topic/a-modern-minimal-spotlight-fixture- To use this you'll need to buy opmax bulbs from Comet's website. Get wedge, much easier to disassemble. Remove…
I recently printer the Dremel Box Organizer (https://www.printables.com/en/model/217722-dremel-box-organiser-gridfinity-based ), but I have some additional accessories. Since the 8220 kit comes with an additional nut with a spot light,…
These files are intended for use with the TOMY TMP Refit Enterprise diecast collectible. They are non-permanent additions that can be removed or replaced as needed, at any time. As such these additions are non-invasive and do not…
I designed this barndoor system for my PAR16 Spotlights. They work great at controlling the light and can be rotated as needed due to the round fixture. Your lights might differ, so check the fixing mechanism and scaling to get a good…
What you need Dummy 13 Version 1.0! printed at 250% KAPPLAKE LED spotlight Printed parts bed1 : spotlight bed2 : cover & button bed3 : cable_adapter
Parabolic reflector for studio lighting, it could be mounted on my other lamp designs for standard LED 20-100W modules with 34mm hole distance Focal height 3mm, overall height 200mm Focal height 5mm, overall height 200mm You can print the…
This is a Mini spotlight housing sculpted to look like concrete brick. This was made specifically for Labyrinth pinball, but could easily be leveraged in several themes. This model is designed to hold an LED from a disassembled Comet…
I used a led spotlight leftover from another project; 24 volts, 120 degree angle, warm white, 25mm: https://www.aliexpress.us/item/3256803619896206.html?spm=a2g0o.order_list.order_list_main.89.469c1802ZuKBM4&gatewayAdapt=glo2usa4itemAdapt…
Illuminate your space with spotlights. We wanted spots at home but don't have a false ceiling. So I designed this lamp to hold a spotlight and be fixed to the ceiling. It fits any standard spotlight with a needed hole size of 70mm. Use…
Front spotlight arms for 3mm LEDs with holders. There is no need to reprint the front chassis, just pass the wires into the hole above the fender, line up the arm and drill a small 2mm hole, the bottom arm has an indentation that goes…
I absolutely love this model by Depronized, especially since I work with the real thing which this is based off nearly every day as a lighting designer. I wanted to use it as a lamp for my desk, but it had to be mounted on the wall. So, I…
A simple pot light diffuser more attractive than a bare bulb and eliminates the harsh 'spot' effect. Print in translucent plastic. Holds snuggly onto the rim of the pot fitting. Use with LED light bulbs ONLY (regular bulbs may overheat).…
Since the original model always broke when putting it on the lamp I remixed it. Increased size to 102% to prevent breaking while putting the shade on the lamp doubled the wall size added screws for the diffusor as a design element → use…
These are the tri-LED versions of the spotlight. If you are looking for single-LED versions, you can find them here . I specifically designed this light fixture for the Phillips Hue GU10 LED bulb. However, it should also be suitable for…
I heard that rain will run onto the lens of an outdoor-mounted Ring Spotlight camera, so I wanted to add a small cap that would prevent rain from running directly onto the front of the camera. I printed it at 100% and it was a snug fit,…
This light needs articulated mount to be mounted on a light stand – https://www.prusaprinters.org/prints/75428-articulated-mount-for-light-stand-bracket All of the details in a blog post –…
I took the excellent arm from the original and remixed it to provide a cable run. I then created a holder arm to fit it and a cable run to keep it all tidy. An m4 bolt and hammer nut is needed to mount to the extrusion. My spotlights are…
This is a holder (printer mount + webcam adapter) for the Trust SpotLight Webcam for the German RepRap NEO 3D Printer. One M4x16 screw and a M4 nut are required to assemble the adapter to the mount The screw in the base of the webcam fits…
This spike can be used to replace the ground spike on outdoor spotlights. The OD of the part that inserts into the bottom of the light housing is just under ¾ in. Use outdoor stable filament and print with supports on it's side. Added a…
Optional material for this model is PCT-G, due to heat production of lamp, but it also works well with PET-G (maximal measured temperature inside the tube was 50 degree Celsius). Use only LED spot lights up to 4,2 W. In the lower part of…
I redesigned the head, to give the moving head a look like a spot light and designed it to look similar to the Eurolite tmh-s60. I think it fits almost any small moving head spot with manual focus. If you need a different design, let me…
Use E27 Bulbs LED only, max 12W. You need to purchase an E27 socket similar to:…
If you print this with a red filament, you have a dual color diffused light and a white spotlight.
To bring some light into my 3D Printer enclosure, I printed these sockets to hold IKEA's HALVKLART LED-Spotlights in there. I added a visor to avoid looking directly into the lamps when inspecting my prints. Printing: Per Lamp you have to…
The spotlight was too wobbly in Dummy13's fist. I added a handle so it is more firmly held within Dummy13's hand. What you need Dummy 13 Version 1.0! printed at 250% Ikea KAPPLAKE LED spotlight Supports are required only for the handle. A…
Not using the useless front spotlights on your Grenadier? Maybe you are fitting larger more useful driving lights in front of them, these covers help conceal the existing spotlights and give a cleaner look. Mount using a bead of silicone…
I didn't want to have a traditional light bar for my 3D printer. So, I instead bought these spotlights on Amazon and made a custom mount for them. I think it turned out great. :) Please feel free to download the fusion 360 file and do…
I built a functioning Super Clamp style mini clamp for the spotlight made by Depronized. The clamp is inspired by the iconic Manfrotto type 035. It also works with M3 bolts and nuts. Have fun! In the picture shown above, the clamp…
This is my remake of the STEDI Smiley spotlights, This prints in two parts, there's the spotlight with the print and then there's a cylinder, this cylinder goes into the first part to make the printed smile white. May have to file the…
This bracket is useful to mount a little spotlight on the 4040 opening aluminium profile of the structure of the printer. You can print more than 2 joints to make the system longer. To join the part, you have to use M4x20 screws with M4…
Remix of camera mount for Trust Spotlight Webcam.
I've just added a set of four spotlights to the front of my Cooper S R53. This requires two relays, one for each pair and a fuse. This is designed to have two relay sockets push in from underneath and a fuse holder in the front slot. The…
I designed this model inspired by a vintage industrial spotlight adjustable spotlights Check the model here: https://a360.co/4jCvwAJ BOM: 3 x Hex Head Screw M8 x 1.25 mm Thread, 30 mm Long 3 x Hex Nut Medium-Strength, Class 8, M8 x 1.25…
I used the wrong bulbs in my ceiling spotlights so the covers melted. I replaced the bulbs with LED ones and created these covers. There is an optional infill included as well. You can print this in any color to change the color of the…
My first remix, a remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder. Added a top cover ( I glued tinfoil to the inside which amplifies the effect) Tolerances are very high (it's going to be…
Low Poly Stage Spotlight
add-on spotlights for the N&K loading vehicles you can find the main body at https://www.thingiverse.com/thing:2713498 i have update whit a add-on Dozer blade = https://www.thingiverse.com/thing:2782700 full arnour =…
The transformer of the old halogen bulbs of the mirror burned out, and it was time to switch to the more energy-saving LED lamps. My choice is the spotlights with GU10 socket, but that the supports on the market are all too wide to fit my…
This model extends the trim around 4" pot lights. I made it to hide the rough edges of the ceiling that weren't quite covered by the new fixtures I bought. Here's the specific model of fixture I have (Website may not work outside Canada,…
Affiliate Link (Hue Gu10) : https://link.amazon/B03H3JSlP Printed with PETG and TPU Try out the printed parts if they fit together before mounting Mount the Bracket first put the Buffer Ring onto the bulb corpus put the Bulb with the…
batman vs superman spotlight Category: Props
Eng: spotlight adjustable in 360 degrees with possibility to pass the connection cables on the right or on the left with independent support. Led internal with diameter from 75mm internal and maximum 90 mm external - The product is not…
Simple mount for a lightstand and whatever surface you can attach 2- or 4- M5 bolt pattern, 4-M3 bolt pattern or just epoxy the top part. BOM Mount body: 4x M5 18mm Bolts 4x M5 Nuts Connector: 1x M5 18mm Bolt 1x M5 Nyloc nut Light mount…
Illuminate your space with this bold cyberpunk lamp, designed for ease and impact. This model prints as one piece — print-in-place and no supports required, with only one step of assembly: snapping on the cap after printing. It includes a…
Introduction & Overview This project is based around the 100 Watt LED modules that can be purchased online. I've played around with these over the years, and I finally decided to make a proper project based on this part. This was inspired…
Easy fix when you get slightly blinded by the bleeding light off the side of the Hue Lily. Built in drainage for rainwater. Clicks into the ridge near the top. It is similar to the shade of the XL version. The objects orientation might…
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.20 Infill : 20% Filament Material : PLA
A 45-degree angled wall mount for Ring Spotlight cameras. I needed to mount mine on a wall that runs parallel to an alley — without the angle, the camera would just stare at the neighbor's fence. This tilts it 45° so it actually covers…
Remix of simple camera mount for Trust Spotlight Webcam Pro
A surface-mounted wall bracket for spotlights that are otherwise installed in suspended ceilings. You can either mount it with a screw or stick it to the ceiling with Nano Tape, as I did. Holds wonderfully. I have used the following…
This decorative LED spotlight cover can be used to mount the light with custom holders. There is an M3 hole with a cutout for an M3 nut, providing secure mounting options. This print will require some support material for the mounting…
I created two different spotlight attachments for the Andoer W140 RGB LED panel. Easy to print, effective for guiding light. Printed on Qidi Tech i-Mate with Icarus 2.2, 0.5mm copper nozzle, 0.25 mm layerhigh, 3 walls, 10% infill. GST3D…
Tak till Ringkamera (Spotligtcambattery)
I really like the Spotlight Depronized created. I wanted an easy way to mount them and be able to remove if/when necessary. So I created a clip mount that has a couple screw holes so they can be mounted pretty much anywhere or used as a…
This thing allows you to use inexpensive color gel filters on your LED accent PAR38 spotlights for the holidays. My home has a bank of accent spotlights. In past years, I've used expensive ($20) colored halogen bulbs. I've recently…
Minimalist housing for GU10 Philips Hue bulbs. Snap-fit design, perfect for costom LED lighting setups.
In order to keep mosquitos out of my house I built thes simple covers. And protect the LED installation (a bit). LEDs are inserted in the roofing of the patio, but access to my roof directly, so I have access from under the roof to the…
For diffusing and directing ceiling spotlight (68 mm spotlight). You can print in white PLA. WARNING: only use with LED lights, others will be too hot and will melt the PLA. Print Settings Printer Brand: Wanhao Printer: Duplicator9 Rafts:…
tutorial: -unscrew the clamp -put the hole where the screw was downwards in the hole of the printed part
--ESPAÑOL-- Foco LED Hexagonal especialmente diseñado para fotografía, exploración, reparación de coches.... ¡¡Es multipropósito!! Cuenta con 2 tiras led de 25cm de hasta 10cm, botón basculante estándar y cargador USB tipo C. Cuenta con…
new diffusors for christmas https://www.printables.com/de/model/64058-spotlights-lampshade-v2-gu10-or-12-v-led-diffusor- You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and…
Adapter for spotlight - measure 100x100mm, external diameter 96mm, internal diameter 67mm
My wife's dog had to be put down last month due to an unexplained illness. I made an outdoor memorial lithophane using a solar led spotlight. We plan on putting it where we will spreading the ashes. Print instructions Category: Outdoor &…
My daughter is going to college as a theatre major - and wanted some Source Four spotlights to decorate her dorm room. A string of fairy lights inserted into the back-ends of these lights make a pleasing display. I did 2 lights per Source…
I created this little spotlight holder to light up the Eye of Sauron on the Lego Barad-Dur set. Once its printed remove the existing Lego push button light and attach a couple 2x6 or 2x8 plates off of the hinge parts from the Lego light.…
I made a simple wall holder for led Spots, tilted at 10 degrees, check the image for the type of Spots used. it is meant to be fixed with 3 5mm screws, and has a built in cable channel for a tidier look. inner diameter: 59mm, should fit a…
Spotlight Cover 4" LED. Modified from Quintin9801's NiLight Cover on Thingiverse. https://www.thingiverse.com/thing:4921726 The cover needed a cutout to allow for the mount bracket on my lights.
Designed for 4" recessed lighting, this provides a cheap and convenient way to add yard lights.
A mount point for attaching a spotlight, worklight, webcam etc. to the corner of a shelf or cabinet. Didn't have any LED strips to get better lighting for my Bambu Lab X1C, but I did have some LED spot/worklights and a shelf next to the…
Actually, we had bought the floor light spotlights for the patio floor, but could not really use them. We couldn't return them either, so we thought about what could be done with them instead. Our patio has 100x100 crossbars and with a…
Trim box for exterior installation of the wired version of the Ring Spotlight Cam. The box covers the mounting base and cord to cover and weather proof. Allows running the cord through the wall into the house without cutting the cord.…
This is a collection of brackets and cover panels for the Ikea Frekvens LED Spotlight cube light. (Ikea Frekvens LED Spotlight (Article Number 504.203.67)) The holes on the light use SIZE HERE screws.
Only for LEDlight. Makes a downlight for 72mm hole fit in a 140mm hole. Not for lightsources that becomes hot. Follow instructions for the lightsource, consult electritian before install. If not used properly it can cause fire, explotion,…
This is a snap on shield for LED spotlights. I use these spots for my outdoor holiday decorations. But out of the box, they spray light all over which takes away from the nearby decorations. This shield helps concentrate the light into a…
My kids tore up the flashlight. So I created a replacement. Now they can rip it every day :-D dimensions: 280 x 57 x 0.4 mm *I glued back the colored flashligh to the white print, but I added lanyard hole so you can use the print itself
A led spotlight cap to reduce the light field. It is designed for an 84 mm spotlight. Category: Household
These fit over standard Par 20 bulbs and give a cleaner and simpler look to your spotlights. You can choose to print them in any colour you like to better fit your decor or party. They do not block the light beam. To install, simply…
Ich habe diese Teile für meine Ring Spotlight Cam im Außenbereich als Regenschutz konstruiert und gedruckt. Print Settings Rafts: No Supports: Yes **Resolution:** 0,25 Infill: 15 % **Filament:** 3DJake PETG Zusätzliches Material /…
I started with a nice slide connector from OTandAT on Thingiverse. I built around it for the base. I made center section to house electrical and added a top cap to mount light. Parts: 16 LED spotlight or your choice. Amazon 4 for $13,…
NOT MY ORIGINAL DESIGN. This adjustable product-photography phone stand was designed by Cemal Design and released as Creative Commons Public Domain (CC0). Original source:…
I designed this for a friend. It fits a “Greenmigo 12W LED Scheinwerfer” (https://www.amazon.de/dp/B071PB63D4). But I think there might be other things that fit this kind of mount. I included the customizable openscad file. It is a hot…
NOT MY ORIGINAL DESIGN. This modular wall-mounted drawer system was designed by Andreas Flip and released as Creative Commons Public Domain (CC0). Original source: https://pinshape.com/items/60913-3d-printed-wall-mount-organizing-drawers…
