4969 modeli
Slotcover fits for the 3030 profiles of your Mini/Mini+! Please measure the two pieces for the right side. The length depends of the location of the mounting plate for the z-axis. You can adjust the lentgh in your prusa slicer or any…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
MK4 / Mk3.9 Upgrade parts but laid out on MK4 with Input Slicing 0.4mm nozzle PETG. Prints 40% faster at the same quality. Original MK3 version takes 2,384 minutes (39.7 print hours) per set. This version takes only 1,434 minutes (23.9…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So I made a new one in F360. First exported the profile from an existing MK3S model. Then created the T-slot nut for M3 DIN934. It was all easy and a 10 minute job. I printed the nut with PETG from “DasFilament”…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Eyeballing the keycap profile is really annoying. Therefore, I went and did this tool to help you identify the correct row. This is meant for Cherry profile keycaps . Feel free to reference https://www.keycaps.info/ for the profiles. If…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…
Wydruk około 5,37 €–6,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)
Wydruk około 4,20 €–5,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My use case is for my gun closet that is getting pretty full. Wanted a gun mount that keeps them close to the walls and won't get in the way of retrieving long guns. Also, I needed the mount to fit any handgun of a caliber not just gun…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…
Wydruk około 5,48 €–6,70 € nettoWstępna wycena jednego wariantu
It would be nice if you post your make. Thank you
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Reel size diameter: 200mm reel hight: 65mm Hub hole diameter: 53mm
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Simple low profile laser bed hold-down pin for small 6mm holes on xTool honeycomb laser bed. Thanks to the top fins being just 2mm high, there should be no interference with the laser head. Print in white colored filament to minimize…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
I needed a flat door handle for my balcony door to glue. This is designed so that the shutters can still be closed. I have glued it with 3M double-sided adhesive strips with the dimensions 50x25mm.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very sturdy and fits aluminum profiles.
Wydruk około 5,09 €–6,23 € nettoWstępna wycena jednego wariantu
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Systemprofil-Eckverbinder für Aluminuim-Systemprofile der Abmessung 20mm x 20mm. in das Loch in der Mitte des Alu-Profils (4,3mm) muss ein M5 Gewinde geschnitten werden. Die drei Alu-Profile werden mit M5x16 Senkkopfschrauben an dem…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
You're gonna need M3x10 screw + M3 nut to holt those together. You can reuse the original pin coming from C270, the hole is properly shaped for that Expects M5 screw and t-nut to attach to the frame You can see the final view and angle in…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Lost those little fiddly plastic spacers for your sprockets? Never fear! Don't despair, whip up some plastic joy with your machine at home and get back on your bike. I used the engineering drawing from…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I believe it's more discrete than other designs because it doesn't have the “roof”, instead there is just an inner ridge on top keeping the tag in place while letting the silvery part of the tag be visible. Prints well with PETG and brim.…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🐒 Monkey Palace – Card Organizer (Remix) This is a remixed and improved organizer for the board game Monkey Palace . I redesigned the original idea to better fit real gameplay and 3D printing needs. 🔧 What’s improved? Lower profile – fits…
Wydruk około 4,28 €–5,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Français en dessous :) __________________________________________ Here's a simple guide to allow you to easily tap M8x1.25 threads into the core of a 4040 Aluminum profile. This works perfectly with this kind of extruded profile:…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's exactly what the title says. If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 You just need: 1x M3 Square Nut (trimmed like in the pic and) 1x M3 Screw of your desired length…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
This are endcaps for a balcony railing to prevent wasp building their nest inside the steel tubes. Rectangular Version: Size: 50 mm x 30 mm (outside), 45 mm x 25 mm (inside) It is designed to fit into a 50x30 profile with 2 mm wall…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Octagon shaped, low-profile dry box for filament. I store my filament in a drawer and this box fits in a square array and is narrow enough so I can stack 2 in the drawer when layed on its side. Latch and hinge design inspired by (copied…
Wydruk około 28,36 €–34,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extreme cheap and fast print, fits anywhere and makes a nice giveaway :) Check your tires for minimum profile or optimum (check your country standards on what you need). Typically you want 3 mm for summer and 4 mm for winter tires for…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
I needed a low profile mount to stick to my wall as a baby monitor. I used two XL 3M command strips (removable velcro tape) to adhere to the wall. I printed the mount out of some PLA+ at 5% infill and 80% infill around the little arm…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
I designed these decorative six-pointed stars with a clean geometric profile, ideal for shiny or metallic filaments that highlight their intricate details. Each star includes two small holes at opposite tips, allowing you to create a…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Perimeter und Infil etwas stabiler.
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
Prusament PETG 0.20mm Speed (default prusaSlicer) 20% Infill Wood screw diameter should be < 5mm
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2D version of: Triumph Daytona 675 D67LC/09 (2009-2012) Triumph Daytona 675 H67 (2013-2016) Triumph Daytona 765 Moto2 HB06 (2020).
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Pour les imprimantes SV01 Pro Upgrade avec le heatbreak fullmetal https://www.amazon.fr/gp/product/B0BJTWZ5C5/ref=ox_sc_act_title_1?smid=ASUA3ZY196WTJ&psc=1 Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stackable Low-profile Athletic/Soccer Cone. Print in TPU. 4 cones in 4 hours.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
After hanging my backpack into first model, the model in question did not even hint about bending under load.. Doubled as a backpack and jacket hook. First impression: Hook is definitely flexier than v1, seems to do fine however under…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
R2_F is for upgraded base with a brace ↓ and R2_F_V2 is for base from manufacture. https://www.prusaprinters.org/prints/51415-prusa-mini-z-axis-brace R3 is for stabilised Z bottom ↓ and R3_V2 is for base from manufacture.…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
# Calibrated Filament Profiles — Polymaker (PrusaSlicer) ## Purpose This repository contains PrusaSlicer filament profiles for **Polymaker** filaments — including filament under the **Panchroma** and **Fiberon** product lines — calibrated…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Antivibration feet for MK3x printers and other printers using 3030 profiles. Needed for assembly: 1x M3x18 1x 3030 M3 T slot sliding nut 1x Sqash ball
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Start here Choose your kit: 4 tools (1–4) or 8 tools (1–8). The table below is the complete printed-parts list for a simple, single-colour build with plain front plates. Print the quantities shown, then follow the shopping list and…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
I made myself corner water diverter as because of poor design current water divert does not keep all water away from wooden base, especially in corners, wood under does not like to be wet! Can be glued in place using silicone or montage…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ersatzstopfen mit Halbkugel für Feldbettprofil 28 x 28 mm
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Cover for square profile 60x60mm
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this bracket file to resolve a clearance issue I was having when installing a Tekonsha P3 Trailer Brake Controller into a compartment in the dashboard of my PN96 97-04 Ford F-150. I have verified this bracket will allow…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tool will help you align M6 self-tapping sleeves for 4040 I-type profiles ( example ). It makes it easier to get the sleeves working right the fist time you make a cut. Some remarks: Make sure that the 4040 profile has a straight cut…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
The “connectors” option from Prusa slicer was used, but i suggest removing a bit of the side thickness from the connectors with a sharp knife to be sure the two parts fit well togheter.
Wydruk około 5,78 €–7,06 € nettoWstępna wycena jednego wariantu
Držák na ovladač pro vysavač RobZone - DUORO ULTIMATE PROFI
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Hello, Today I have an Extension cord holder for you. It is suitable if you want to fix the extension cable somewhere. It fits perfectly for the standard extension cable profile, which is 41x53x150 mm. It can also be used for other types…
Wydruk około 5,55 €–6,78 € nettoWstępna wycena jednego wariantu
Hey Guys, Here are my Creality K1/ K1C/ K1 Max/ Orca Slicer , Quality, Speed, and Stealth Profiles for 0.4 Tested on K1, K1 Max, K1C Hotends. (Standard, CHT, Unicorn) If you are using the RetroGlide Gantry Mod You can find my latest…
This is my profile for the K1 Max in OrcaSlicer. It contains the printer config, 2 printing profiles and a material profile for the included HyperPLA. Also included are a model for the build plate along with the texture image, see below…
Please give it a 💖 if you like it 🥰 Edit 2024-07-28 : Flavor updated Edit 2024-07-13 : Added a “Quality Profile” Added the thumbnails to preview models on the printer 👉 Link to my Ender 3 V3 SE Profile 👉 Link to my Ender 3 V3 Profile 👉 My…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 Profile 👉 My other Slicer Profiles & Models Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 32 minutes…
This Projet is WORK IN PROGRESS If you like this project, take a moment to buy me a virtual coffee … To install the texture and printer silhoutte in PrusaSlicer, go to: Settings → Printer Settings → General → Bed shape → “Set…” Load the…
Please give it a 💖 if you like it 🥰 Edit 2024-08-29 : Import error of the Ender 3 V3 Plus for Cura solved Edit 2024-07-28 : Added a “Quality Profile” Added the Ender 3 V3 Plus 👉 Link to my Ender 3 V3 KE Profile 👉 Link to my Ender 3 V3 SE…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
This is a simple easy to print design to convert an Ikea Skadis into a freestanding pegboard. The feet attach to the board using the supplied Ikea hardware. I've uploaded two designs: one with space for an M4 hex nut, and another which…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
How to setup the profile: Go to File → Import → Import Config Bundle and select the .ini file. Download this program and go to Print Settings → Output options and replace “thumbnail-path-here” with the path of the program you downloaded…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) The Low Profile Wall Mount is a compact and durable mounting system designed for quick and clean installations. The mount features a…
For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.
This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…
These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…
This is a keycap for the low profile Cherry MX1B-L2NA switch. It prints perfectly on a Prusa Mini with 0.15 mm layer height. The keycap is easy to put on, doesn't fall off and is still easy to take off. Created this basic keycap in…
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
All parts created with solidworks aand rendered with solidworks visualize. You can simply resize the parts and use it
Hi, I was struggling to get a working profile under Orca Slicer until they added a base profile for the V3 SE. However, it still did not lay down a proper initial layer and when it did it stopped extruding from layer 2 onwards. I think…
Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…
These are T-Nuts for the common 20x20mm Aluminium Extrusion profiles many printers are made of. I designed them for my Profore Original 3D-Printer to attach things like cable clamps etc. While designing, I learnt that the profiles look…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
Here's a basic keycap set I made for my K95, but will likely be compatible with any Cherry MX based key switch. Includes all keycap sizes as individual files - feel free to mix and match to create your own colour set. The keys feel good…
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…
Anycubic Kobra 2 Max Profile for Orca Slicer Manually copied the settings of the K2M Prusa profile into the default Orca Slicer Kobra 2 profile. Maybe something can be optimized, but it's working fine! Also added a found bed stl file.…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
These feet here are designed for all printers, which are using V-Slot 4040 extrusions as frame. So if these feet are working with your printer, and your printer is not listed yet, please tell me, so I can add the printer to the list.…
This profile is the V2 of my previous profile that offers fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic…
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
Collection of screws extruded aluminum profile including : 20x20, 40x20, 30x30, 60x30, 40x40, 40x40L, 80x40, 80x80, 80x80L L = Light Weight
Updates 03/2022: Changed two screw holes on the switch side part to slotted holes (v2.1). This allows you to tune the fit and tension during assembly. 04/2021: Added a "MIRRORED" version, which allows you to flip the PSU around and have…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
since the original cap was way to high for me needs, i made it low profile, but this did not distribute the water well enough, and it tended to splash on one side - so i added this “knob” in the middle, that solved this issue prints with…
Here are the Orca Profiles that I setup to get quality but quick prints
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
This is my Orca Slicer profiles for my Anycubic Kobra 2 Neo. PLA Filament profile included (Sets the bed to 45 degrees). I took the PrusaSlicer profile and converted it to Orca Slicer. If it helps please consider leaving a review and a…
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…
This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…
Prusa Slicer Profiles for Creality K1 and K1 max The model is just there, cause I needed one to upload the Profiles. Can ignore it. There are two config files. load both Included : - PLA high flow Material Profile (Custom Gcode Added for…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PETG with first layer height and temperatures to suit Wham Bam PEX. Also works just as well with textured plate. After loading the .3mf there is setting changes in all 3…
