Liczymy pasujące modele…
Samsung Galaxy Z Fold 7/8 Ultra Wireless Charging Dock UPDATED - Fits the Galaxy Z Fold 8 Ultra also. I love my Samsung Galaxy Z Fold 7, but I couldn't find a nice charging dock that would allow me to charge my phone in the “unfolded”…
A very simple Stand for an Anker Zolo Qi2 wireless charging pad with a simple frichtion/press fit. Just push in the pad from behind it then ever-so slighty sticks out so the phone does not rub against the stand. I'm using this with a…
Stand for Pixelsnap Qi2 wireless charger and other 56mm diameter charger. Work well with Google Pixel 10 serie and magnetic wireless charging phones. Printed on front face, no support needed. PLA 100% infill.
Specifically designed around a Yeti Rambler can koozie and the NIU KQi2 Pro scooter. Replaces one of the reflectors and uses its M4 bolt holes. You need the following hardware: 2x M4x12 bolts 2x M4 Washers Probably best to print it in…
I wanted a stand that could hold my phone by the anker Qi2 charging pad but also I wanted to be able to pick up the phone with the charger still on it. It also works with the thinner anker magsafe charging pad I have so it may work with…
FOR ANDROID PHONES, A MAGSAFE CASE IS REQUIRED. Can fit up to a Samsung Galaxy S24 Ultra. The phone shown in the pictures is a Samsung Galaxy S25. The pictures I took of the stand when printed did not have the rounded corners shown in the…
I needed this charger to sit flat so I could fasten it with VHB in my car. The holes on the side probably allow some cooling to happen, they are primarily there to allow you to pop the charger back out of the holder.
Holds the Google PixelSnap Qi2 Charger. In vertical it keeps a Pixel 10 Pro just off the surface. Prints well at 20% infill with supports.
I was tired of the slow and unreliable charging from the built in wireless charging pad and I didn't like the alternatives out there, so I decided to make my own. Required Hardware: Apple MagSafe Charging Puck (Gen 1) 1m…
To address the stupid issue that Niu Scooter does not have any hook to hang your bag Print Settings Rafts: No Supports: No **Resolution:** 0.2-0.3 Infill: 20% **Filament:** Whatever PLA/PETG whatever Notes: Use 4 loop perimeters if you…
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
Qi2 Wireless Charging Phone Stand Tired of your phone lying flat while it charges? This 3D printable stand is designed to perfectly house a Qi2 charging puck, transforming it into a convenient, upright charging station for your desk or…
UPDATE: 8/21/2025 I added more space to the front of the lip to give it more room when charging with the Fold7 open. The phone sits better in the frame now. V2 is in the download files. Original Posting. First of all, I am not a graphic…
Print two slider mounts and one charger holder. Snap the mounts onto the main part of the charger holder, with the flat side towards the mounting surface. Put the charger in (plug first through the slot), and it should be a friction fit.…
This is a remix of the anker zolo stand https://makerworld.com/en/models/1822218-anker-zolo-magnetic-charger-stand-qi-2-magsafe#profileId-1945131 and https://www.printables.com/model/619781-usb-from-ford-focus-mk2 into a phone holder for…
A MagSafe/Qi2 mount that replaces the OEM rubber wireless charger pad in the E210/2019+ Corolla with the Premium Package ( 861C0-12011 ). Not designed for the standard package with the storage bin ( 58839-12090-C0 ). From my testing, the…
Magsnafe / Qi2 / Pixelsnap charger base for RAM 25mm ball mounts in my trucks using the Google Pixelsnap charger puck. Holds phone at the bottom just enough for helping on off/bad roads and makes attaching very easy, no futzing around…
Voron-Style Qi2 Magnetic Charging Stand (Pixel 10 Pro) Inspired by the industrial, functional design language of Voron 3D printers, I designed this desktop stand to take advantage of the new Qi2 wireless charging standard. I created this…
Fits momax qi charger Tested with iPhone 15 pro max
Action Sitecom Qi2 wireless charger adapter for Industrial Phone Stand by @Josh3d
BMW IX phone mount. Fits ESR mini qi2 charger. Hole is 58.9mm and 7.5mm deep. Uploded step file so should be easy to mod for other chargers.
This is a phone mount for an F150. It fits in the space in front of the console shifter. This is designed to fit the ESR Cryoboost Qi2 Phone Charger. It will also physically block the button to stow the shifter. This was remixed from a…
2024 Replacement Charging Block compatible with Honda Ridgeline 2024 - 2026. I got tired of the anemic OEM part that would heat up my iphone 14 and would barely charge it. The OEM would allow the phone to slide around and positioning it…
This model lets you mount your phone (via magsafe) on you Skadis so you can watch DIY craft videos and follow along, watch a movie while supervising you 3D Print (so you can pause the print and insert magnets), or just charge your phone…
Charger https://www.amazon.de/-/en/dp/B0GYS895L4 Cable https://www.amazon.de/-/en/dp/B0FL82DWSJ Use Tesa 9x0,2mm tape on 3 of the ribs and feet of the charger
Simple Stand for Baseus Simple Mini4 Air Magnetic Charger This is a custom stand designed specifically for the Baseus Simple Mini4 Air. Important Note: I highly recommend printing this with heat-resistant filament (such as PETG, ASA, or…
This is a customizable pixel 10/10 pro case. To customize the case (bambu studio) : - Download the "Customisable sheet.stl" file - Import to your CAD software - Create a sketch and extrude by 0,01mm to be detected by your slicer Then,…
I designed this phone mount so I can charge my phone over night and use its Always-On display as a bedside clock. It fits the Anker Zolo Qi2 charging pad: https://amzn.eu/d/05fnNduC The phone can be mounted in landscape or, in case it is…
I have this fairly cheap and pretty decent “UGREEN 2-in-1 Qi2 Magnetic Foldable Charging Station” - but I use it on my nightstand and the led charge indicator is INSANE when using the airpod charger… It lights up the entire room at night.…
Introducing the SnapStand for Qi2 charging (left in pics) similar to Google's PixelSnap Stand for a fraction of the price. It's also compatible with non-Qi2 phones (that don't have magnets). The throwback design to the original Pixel…
A magnetic phone stand that grows out of its own base. Most MagSafe stands are a ring stuck on an arm stuck on a plate. This one is a single continuous surface: the ring is not glued onto the body, it is born from it. There is not one…
Baseus Qi2 MagSafe Car Mount – 1/4"-20 Snap-Fit Holder Simple and solid snap-fit holder for the Baseus Qi2 / MagSafe charger (60.5mm × 11mm) . Designed to mount to standard 1/4"-20 arms (Ulanzi, SmallRig, suction mounts, etc.) using a…
This mount slides onto a small shelving unit to hold the new Samsung Qi2 magnetic wireless charger . It has built-in cable routing to hide the charger’s wiring and route it to the rear of the unit, allowing for convenient bedside…
First of all, for commercial reasons this can NOT be called Magsafe , being trademarked by Apple, we go by the name Qi2 , published by the WPC. I choosed to make phone hardware because 90% of people here dont actually have a professional…
you need to add a magentic plate after the print i used this one https://www.amazon.de/dp/B093PL1CD8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 and added it with high strength double sided tape. i used onshape therefore it's needs to be…
This is a remix that allows you to place the phone horizontally and allows use without qi2/magnets. ALL CREDITS GO TO THE ORIGINAL CREATOR.
Improve your wireless phone charging experience in your US 2023-2026 VW ID.4! Features Improves charging efficiency and reduces heat thanks to magnets perfectly aline your MagSafe or Qi2 compatible phone with the wireless charging coil.…
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
its a charging dock for the Samsung watch charger and an apple magsafe charger
you need to add a magentic plate after the print i used this one https://www.amazon.de/dp/B093PL1CD8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 and added it with high strength double sided tape. i used onshape therefore it's needs to be…
Needed a more compact Iwatch charger stand and a Iphone stand that uses the anker qi2 wireless charge. Wires are underneath the base. No supports needed.
Action Sitecom Qi2 wireless charger adapter for Industrial Phone Stand by @Josh3d
TORRAS charger have the ring on the back so you can put your hand on the desk and angle it with that ring but on the cluttered desk I am always searching where the charger is so decided to make a holder similar to ones for magsafe. TORRAS…
This is a customizable pixel 10/10 pro case. To customize the case (bambu studio) : - Download the "Customisable sheet.stl" file - Import to your CAD software - Create a sketch and extrude by 0,01mm to be detected by your slicer Then,…
Improve your wireless phone charging experience in your US 2023-2026 VW ID.4! Features Improves charging efficiency and reduces heat thanks to magnets perfectly aline your MagSafe or Qi2 compatible phone with the wireless charging coil.…
TORRAS PolarCircle Qi2 Mag-Safe Charger Mount I have a Samsung Galaxy S23 and have about ½" clearance at the bottom of the phone when mounted. May not fit larger phones. Fusion 360 file included if you want to tweak the dims. Base is…
A simple stand designed to hold an induction charger. I wanted one that could be secured to my nightstand. The cabling is routed through both parts and exits through the bottom of the “clamp”. The “clamp” isn't a clamp, it's rigid with a…
All parts is based around the Linocell Magsafe wireless Qi2 charger. Naturally, it is based on my own phones and use but it may also be a base for other peoples use. Currently supported: Google Pixel 7 Pro Google Pixel 8 Pro (the 8 Pro…
its a charging dock for the Samsung watch charger and an apple magsafe charger
Samsung Galaxy Z Fold 7/8 Ultra Wireless Charging Dock Don't have a printer? You can get one at my store ( Link ) What's different in the paid version? Weighted version: I added embedded weights to the design. The print will pause, and…
Needed a more compact Iwatch charger stand and a Iphone stand that uses the anker qi2 wireless charge. Wires are underneath the base. No supports needed.
TORRAS charger have the ring on the back so you can put your hand on the desk and angle it with that ring but on the cluttered desk I am always searching where the charger is so decided to make a holder similar to ones for magsafe. TORRAS…
Created to balance stiffness of case, improve hand feel of buttons, and keep screen coverage minimal. OnePlus 10 Pro case with cutout for Qi2/MagSafe ring or magnet array. Printable with rigid and flexible materials.
Face plate slides together holding Belkin pad in place. The stand is made to stand straight up or at an angle. No glue required. https://www.amazon.com/dp/B0F8LMHB64?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
![[v2] OnePlus 10 Pro Case /w Qi2/MagSafe Attachment](https://media.printables.com/media/prints/50863863-88b5-42b6-abad-953173d6e0b0/images/12884508_8ae81a6f-a3e7-4964-a62a-65b70450cb0c_0abc1aeb-da4e-490e-b899-303a30a73885/thumbnail3.png)
