1385 modeli
Simple stand originally designed for a Ubiquiti UniFi AP AC Pro Also confirmed to work with: UniFi Access Point WiFi 6 Pro U6-LR-US Possibly others? If it works on other models drop a comment and let me know! Snap fits into existing holes…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
I modified the "R6" Extruder parts that come with the Mk3s+ printers to work with the Slice Engineering Mosquito Hotend. This is only compatible with the 40mm fan. I left a "vent" in the Extruder Cover part. I don't know if this is…
Wydruk około 6,40 €–7,83 € nettoWstępna wycena jednego wariantu
Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Das ist ein Case für die Montage einer Ubiquiti UniFi IN-WALL - UAP-AC-IW Damit kann die UAP-AC-IW einfach an die Wand geschraubt werden und das Netzwerk Kabel nach unten herausgelegt werden. Habe für die Montage wieder M3 Gewindeeinsatz…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is wall mount for all Ubiquiti UniFi AP, Lite, Pro and Long range. (for big mounting plate with 3 or 4 screws and small mounting plate) this mount fits to newer APs with blue light. There is wall mount and corner mount version.…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount aligns with OEM screw holes in UVC-G3-Flex-PWM-WT mounting kit for Ubiquiti Unifi Protect UVC G3 Flex security camera. Hinge is indexed with detents allowing for secure positioning of camera angle at 30-degree increments. Hinge is…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
10" rack tray for the Ubiquiti Cloud Gateway Ultra/Max gateways. Model is split in 3 parts (tray, left- & right mount) to be printable on smaller print-beds. The left mount also contains a slot for a Keystone jack. The mountings are…
Wydruk około 5,59 €–6,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ubiquiti AP U6 Lite ceiling mounting without drilling into the ceiling was the challenge I solved with this model. Deutsch: Ubiquiti AP U6 Lite Deckenmontage ohne in die Decke zu bohren war die Herausforderung, die ich mit diesem Modell…
Wydruk około 1,98 €–2,41 € nettoWstępna wycena jednego wariantu
Pieza de repuesto para gancho de mosquitera. Print settings for my Kobra 2 Neo: Layer height: 0.1 Print velocity: 10mm/s or 20mm/s
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter allowing you to turn any UP Sensor into a leak detector. Materials: Qty 2, M3x6, Hex Head Bolt Print Settings: No Supports 0.25mm Layer Height NOTE: Use bolt with flat head to ensure contact with pins on UP sensor, see product…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a battery cover for the Electric Mosquito / Fly Swatter
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
The bracket was designed for a roof with a 50deg pitch. It may not work on really shallow roofs. It prints without supports. As there are no fillets between the bracket and the plate (in was a hack in a hurry, there is an issue with…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Herramienta para quitar las pulgas a tu mascota ideal para que no se quede la cabeza incrustada. Tool to remove fleas from your pet, ideal so that its head does not remain embedded.
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Źródło oznaczyło ten model jako treść 18+.
An unofficial wall/table mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5. It can be either screwed in place with two M3 screws or attached with double-sided tape. I have included Three versions of this model. Open mount: Uses less…
I Use the Logitech Pro X TKL Red keycap by @TheMilkman Link: https://www.printables.com/model/1013639-caution-keycap -Clip the parts togehter and glue it on your keyboard -You can glue it on the back of your keyboard or clip it in -Don't…
An unofficial wall arm mount for the Ubiquiti Unifi U6 Enterprise, U6 Pro, U7 Pro Max and U7 Pro. The holes on the arm align themselves with the holes marked with “A” in the metal face plate “U-PRO-MP”. I've also shared the .step file if…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press the a little so they can compress and enter the mount, after…
This is a 1:2,000 scale model of an Arquitens-class Light Cruiser from Star Wars with two versions. The Republic Arquitens ("print_sw_arquitens-republic.stl") is based on its appearance in Clone Wars, the Imperial Arquitens…
The Cloud Gateway Max gets hot! Do not print in PLA!
I edited the final release of the Stealthburner to fit the Mosquito Hotejd from my Afterburner. The Assembly and the Heatset inserts are exactly the same as for other Hotends. Edit 30.04.2023: After doing Input Shaping and making…
Now that the Arquitens class (the Class 546 variant anyhow) made a central role appearance as Moff Gideon's flagship in the latest season of The Mandalorian I've been able to completely rework my old model from new reference photos,…
Replacement mounting plate. Indices on the inside for easy orientation. Small grooves in the mounting slit which prevent spontaneous dislodgement whilst still allowing for tool free attach- and detachment.
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…
The de Havilland Mosquito, "Mozzie", "The Wooden Wonder", was a British second world war multi-role aircraft, noted for its almost entirely wooden structure, speed, and adaptability. Conceived as a fast attack bomber, it also took the…
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. Rendered a couple of versions as STL,…
I am using it with U6-Pro, but should also work with AP AC Pro. Instead of snap fits to attach a backplate this remix has 4mm holes so screws can be used to attach a backplate. Added also version with longer stand to fit U7-Pro AP as it…
Just a rescale of the OG model to fit the UP 6 pro mounting bracket holes—they lined up perfectly and secured easy with short M3 screws. + nuts.
A 10-inch rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press them a little so they can compress and enter the…
Eine 3D-gedruckte Fliegenklatsche, die vollständig aus PLA (Polylactid) hergestellt wird, ist ein praktisches und umweltfreundliches Werkzeug zur Bekämpfung von Insekten. Sie wird mithilfe eines 3D-Druckers produziert und bietet die…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-Mini. I have included two versions of this mount: For two USW-Flex-Minis For a single USW-Flex-Mini To install your switch to this mount, simply slide it in. But once you reach the…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
UPDATE 07/29/2020: RevB is posted. Please note RevB parts are incompatible with the original ones. Carriage Updates: Reworked profile to not interfere with the smooth z-rod. Duct: Optimized airflow, better angled the side outlets to hit…
I really liked this design but it was for the G3 Instant Camera and I have G4 Instant camera's.. Not sure why Ubiquiti decided to change the mounts ever so slightly but because of that the G4 can't use G3 mounts. So this is a remix of the…
Remix of the Open wall mount with tabs added at the bottom to allow for vertical mounting.
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
This is a mounting system for the Unifi G4 Instant Security camera based on an excellent design for the G3 Instant. This design uses a corner bracket or flat mount with a dovetail socket, a 2 piece hinge that slots into the dovetail, and…
An unofficial wall mount for the Ubiquiti Unifi Cloud Gateway Ultra. It can be either screwed in place with two M4 screws or attached with a double-sided tape. It works for the UCG-Ultra | UCG-Max | UXG-Max. I've also shared the .step…
Hello Everyone I designed two types of stands for Ubiquiti UniFi U6+ (U6-PLUS) Access Point. The stand is compatible with other UniFi AP models that have a dimension of Ø160 x 33 mm (U6-Lite, AC-Lite). I chose the optimal tilt angle of…
INTRODUCTION I couldn't find a nice curved (and free) MP5 magazine for my Mosquito so I created my own. Feel free to try it out and complain if you have issues. STEP files now available. The model is based on two existing models: - BB…
This is a key that inserts into the top of a Ubiquiti Networks UniFi AP to allow it to be removed from its wall mount. Insert into the slot on the top edge of the access point and twist left about 1/8 of a turn. The taper should be toward…
This is a reupload from https://www.thingiverse.com/thing:5572539 which is itself a reupload from a different website. Credit to thatguy_ie on Thingiverse and Crosstalk Solutions on youtube for bringing it to my attention originally.…
This is a stable desktop stand designed for the Ubiquiti U7 Pro XG access point. Compatible with any AP using the Flagship AP Replacement Mounting System (SKU: U-PRO-MP), up to approximately 206 mm in diameter. Updates in V2: Reduced size…
In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring…
I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…
I was recently inspired by glgr with his curved magazine creation https://www.printables.com/model/938167-mp5-curved-airsoft-magazine-fits-mosquito) and saw there was not a 3D printed straight magazine for the Mosquito Open Beta 2, so in…
Minnesota Mosquito. G-code used .6 nozzle and fills up the entire plate. (Included organic supports)
SSD tray to replace the original UACC-SSD-Tray
The switch is flat on top but is tapered on front bottom edge. As a result, two versions of the bracket are supplied. The standard mount is for a shelf mount. There is an inverted version that is better for mounting to a wall, hanging…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL In my old installation, I used a wifi access point on a shelf at the same time as a switch. Since ubiquiti doesn't offer this option and I don't want to…
A 19" rackmount for the Ubiquiti UCG-Ultra. Parts held together with screw and nut, no glue required Ignore my poor print quality. Right side appears to be slightly taller than the left in my photos (it was - my cock-up) fixed in the…
Desk stand for Ubiquiti's Unifi 6 Lite access point. 15-20% infill 0.2 layer height
UPDATE: after inquiries have i made one that is 5 mm high, for more airflow Wall Mount for ubiquiti unifi Cloud Key Gen2 Plus Print one of each. 5mm hole for screw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
UPDATE: After a year of use I noticed PLA was not holding up and where the two parts meet it started to sag. You might want to print this in non-PLA or support it with a plain metal rack. Two-piece design that slide locks together (no…
A simple stand for a UAP AC Lite or a Nano HD since both use the small mounting bracket. Print instructions Print it laying on its side.
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
A burner for mosquito coils that is very quick and easy to print. Printing parameters: Material: ANY Layer height: 0.1-0.2 mm Supports: Yes (only for the burner, not necessary for the pin)
The Ubiquiti G3 Instant has a small base and is easily knocked over. Simply setting it on a shelf doesn't allow and vertical adjustment. This stand is a little more stable than simply setting it on a surface and allows full articulation…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
UK: Google Translate Bracket for Ubiquiti USW-Flex-Mini 5 Port Switch The bracket is centered both ways, so that the holder and locks can be welded firmly, but no more than it can be easily clicked out again, and at the same time it is…
This is a corner mount for the Ubiquiti Unifi U6-Mesh (and UAP-Flex-HD) access point. We needed to mount a UAP Flex externally, and wanted to get the best possible coverage by using an outward corner, so remixed the referenced models to…
Crude Remix to be able to print it in one go on bigger printers. At least a 370x370mm printbed is required. Dont mind the blocks in the preview, they are negatives volumes and will not be printed. Load the project as “Only import…
I wanted to create a simple clip-type wall mount for my Ubiquiti Flex Mini network switches. I have them installed in walls and under the table. The Flex Mini has a very rubbery bottom patch which keeps it in place without any additional…
Link to improved version A replica of the imperial arquitens-class cruiser as seen in Star Wars Rebels. The model is at 1:10,000 scale. The photos show a larger print at 1:2,000 and a smaller one at 1:10,000. Print instructions I would…
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
Stand for Ubiquiti U6-LR-US WiFi6 wireless access point. Use #8 sheet metal screws to mount metal plate to stand. [OPTIONAL] Use #6 sheet metal screws to mount Power Injector to back. Print with extra perimeters (4-5). NOTE (14Dec2022):…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These are easy to lose and break. I lost mine, then found it again and used it as inspiration to design this replacement from scratch. This slides on and fits perfectly in my test print, just tight enough, and also the screw…
Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…
This model clips into the existing quick snap fittings for the Unifi Protect G4 Instant and allows the camera to be angled downwards more than the existing swivel arm allows. The angle of this model is 45 degrees downward. The connector…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Please message me if you have any issues with models, I have not tested after I made some modifications. Should fit without modification to Mosquito base. Hop adjustment screw needs to be replaced by Some components needed: 3x M3x5-6…
NOTE:This is an update version 1.2 -Better control of Hotend fan airflow to reduce airflow leak towards the print surface. -Address the issue of airflow from the print fan hitting the hot block. -The X-Carriage is optional Slice…
Ubiquiti U6+, U6 Lite and AC Lite UFO stand
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
I was having trouble with overheating APs so I created this remix to help with airflow around the AP. It is a mounting plate for unifi APs with standoffs so that the AP does not mount flush with ceiling or wall. The locking tab also has a…
To prevent the bubble level from getting trashed, which comes with every Ubiquiti Unifi Access Point, i designed this carrier thing for the bubble level to snap in. Print it with the slide-opening looking upwards with your most liked…
Simple wall mount adapter for the Ubiquiti Flex Mini 5 port switch. This can be used with cables coming out of the top or the bottom. Affixes easily with common drywall anchors or 3M adhesive strips.
This allows you to replace the stock E3Dv6 hotend on a stock Prusa MK3s/2.5s with Slice Engineering’s Mosquito hotend. This installation uses the existing mounts and 3mm hardware found on the Prusa. You will need to provide a short…
Modified the StealthBurner toolhead to work with the Slice Mosquito Hot End Original File sourced from: https://github.com/VoronDesign/Voron-Stealthburner/tree/main/CAD Update: I tightened up the tolerance fit of the hot end. Should fit…
Added holes for U6+ mounting bracket and added additional cable routing options.
Uses 10 square m3 nuts and 10 m3x30mm screws (you should have these from the original build) to assemble along with the rear block from the original stock files.
Ender 3 BMG E3D V6 Direct Drive Extruder Lightweight Mount Updates: 2021-07-24 - The endstop filament runout sensor combo is redesigned with a better reverse bowden and wire path. (Ender 3 Limit Switch Bracket DD Sensor v9) 2021-03-27…
Unifi G4 Doorbell Pro Habe hier ein Halter für die G4 Doorbell Pro erstellt um die alten Schraublöcher zu verstecken. Am besten mit PETG/ABS/ASA drucken um die Haltbarkeit zu gewährleisten Viel Spaß damit
A Giant Mosquito. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Use M3 Nuts and M3 x 16 mm screws. I printed the door in transparent filament. Tested and approved by our cats😻
Be persistent like a mosquito, at the end you will get your bite! (Easy to print NO raft or support needed) Feel free to join my YouTube 'Channel if you want to see more of my cool projects or printer reviews https://bit.ly/2NonEXS Print…
1x1 Gridfinity module for a single 36mm bottle. This module is suitable for Liquitex, Vallejo and other bottles of up to 36mm diameter. Prints without supports. For multiple bottle holders in a staircase configuration, I recommend…
---------------------------------------------------------------------------------------- CHECK OUT THE NEW & BETTER VERSION IN THE REMIXES! NEUE & VERBESSERTE VERSION IN DEN REMIXES ONLINE!…
Link to handguard: https://www.printables.com/model/751077-m-lok-handguard-for-mosquito-v2-airsoft-kit Print buffer tube with clearance test parts. Based on clearance test, print stock that is marked with same number - should be as tight…
It's another mosquito spiral holder. To make the spiral hanging pin look at the photo sequence. Happy printing !
Description UK: Google Translate Bracket for Ubiquiti UniFi UX Express The bracket that locks the Ubiquiti UniFi UX Express firmly, however, no more than it can easily be clicked out again, and at the same time it is possible to change…
Model of an original wall-mounting bracket, that comes with the PoE-injector for a UniFi AP AC Lite. Might be compatible with other UniFi PoE-injectors. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: Yes Resolution: 0.28 mm…
I re-made this model to be able to adjust the Nanostation even more then the previous model. A wider range to be able to point the Nanostation makes it easier to mount it to the wall one time and not have to worry about it again. Printed…
07/25/2020: I have created a cooling upgrade for this mount: https://www.prusaprinters.org/prints/37368-prusa-mini-mosquito-fan-shroud I really liked Woraphot's design however I wanted something that fit the Original Prusa Mini hotend…
Wall bracket for Unifi Flex Mini.
