Wyniki wyszukiwania: ratche

Sortowanie

1614 modeli

P
PrintablesLuke's 3D

Ratchet toothpaste tube squeezer

I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…

Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu

Pobrania
111 784
Polubienia
26 163
Ocena
4,87
P
Printablesfns720

Ratchets

Just a nice ratchet for holding your misc. cables together. This is my second ratchet design iteration. The previous ones required some assembly and M3 nut & bolt but in this one the single STL file contains both parts preassembled so you…

Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu

Pobrania
28 413
Polubienia
4405
Ocena
4,92
P
PrintablesDaHouzKat

Ratchet toothpaste tube squeezer

Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…

Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu

Pobrania
3550
Polubienia
843
Ocena
5
P
PrintablesObe_Design

Cargo / Ratchet Strap Clip – for 25mm Straps

This 3D-printed cargo strap clip is designed to slide over a rolled-up cargo strap, keeping it neatly coiled and preventing it from unraveling during storage or transport. Perfect for keeping your garage, workshop, or van organized! These…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu

Pobrania
1578
Polubienia
995
Ocena
4,96
P
PrintablesVerender

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1566
Polubienia
581
Ocena
4,88
P
Printablesnjsoly

Chonkified Cat Scratcher Cardboard Cutter

Changes It's markedly longer + Helps the guide establish a firmer footing + Helps so your hand is less likely to catch on the cardboard; cardboard cuts are no fun It's also taller (more space between the cardboard guide and the grip top)…

Wydruk około 5,14 €–6,29 € nettoWstępna wycena jednego wariantu

Pobrania
1039
Polubienia
184
Ocena
5
P
Printablesteslapunk

Mini bit ratchet

I like the original idea of the small single piece ratchet which can be a real lifesaver in small and narrow environments. But due to it's design you can't apply pressure to your screw as the bits will slip through the ratchet, i.e. when…

Wydruk około 0,62 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
543
Polubienia
102
Ocena
5
P
PrintablesHP

Facehugger Backscratcher

Backscratcher inspired by the facehuggers from the Alien movies. I printed it using soluble supports since it's relatively thin.

Wydruk około 10,31 €–12,60 € nettoWstępna wycena jednego wariantu

Pobrania
434
Polubienia
227
Ocena
0
P
Printablescbrick

Better 3dprinted LTT Stubby ratcheting Screwdriver

This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
249
Polubienia
79
Ocena
5
P
PrintablesWorstCase

Flat Crank handle for Ratchet strap reel (clicky assembly)

The original crank is made out of three parts and they have to be assembled with a screw. This is overly complicated for a simple organizer AND it is quite bulky. In my case it wouldn't fit in the tiny compartment of my car with the…

Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
234
Polubienia
74
Ocena
5
P
Printablesdrewiller

Gridfinity Craftsman 1/4" and 3/8" Ratchet Holder

Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.

Wydruk około 5,37 €–6,57 € nettoWstępna wycena jednego wariantu

Pobrania
125
Polubienia
21
Ocena
0
P
PrintablesBoomerguy

Classic scratcher tip for Scratch Attach!

A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.

Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu

Pobrania
120
Polubienia
8
Ocena
5
P
PrintablesWolvie

Velociraptor Claws Scratcher

I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…

Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
109
Polubienia
39
Ocena
0

HSW Ratchet wrench and socket set (5-12mm) holder

Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm) Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws. For the top most M3 screw I used low profile half round head. For the other two, the shape of…

Wydruk około 6,31 €–7,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
106
Polubienia
18
Ocena
5
P
Printables3DHippo

Zombie Hand Backscratcher

Unleash your inner undead with this terrifying yet practical Zombie Hand Backscratcher! This detailed 3D model features a grotesque, decaying zombie hand, complete with gnarled fingers and eerie, realistic textures. Perfect for those who…

Wydruk około 13,84 €–16,91 € nettoWstępna wycena jednego wariantu

Pobrania
88
Polubienia
30
Ocena
0
P
PrintablesBig Nubbins

Ultimate Back Scratcher combined remix for big boy printers

This is a remix of jimerb's legendary 4-function back scratcher. Please go to their page and like the model! This is a simple union of the base and handle into one long part. The length is scaled to 88% of original. It's 330mm long to fit…

Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu

Pobrania
87
Polubienia
3
Ocena
0
P
PrintablesRPK

Enhanced Backscratcher / Rückenkratzer verstärkt

EN: This was another back scratcher I really liked. Apparently, the creator’s account, “Cabbage63,” has been deleted, and despite an extensive cross-platform search, I was unable to find any relevant uploads. However, it broke one day…

Wydruk około 5,17 €–6,32 € nettoWstępna wycena jednego wariantu

Pobrania
81
Polubienia
12
Ocena
0
P
Printablesmscalora

No Nonsense Back Scratcher

Two piece, glue together, prints in any rigid material, I used PLA. Paint-on Support suggested only for the connector tab as show in image. I suggest 5 or 6 perimeters and 25% gyroid infill. If you open the Fusion 360 CAD file you can…

Wydruk około 4,10 €–5,02 € nettoWstępna wycena jednego wariantu

Pobrania
69
Polubienia
17
Ocena
0
P
PrintablesClaus

Handle for ratchet bar clamp

Replacement handle for Falke ratchet bar clamp .

Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu

Pobrania
69
Polubienia
17
Ocena
5
P
PrintablesChillyHippo41

Bit Holder For Williams WRS-1 Ratcheting Screwdriver

A simple yet functional bit storage solution for the Williams WRS-1 Ratcheting Screwdriver. It may also fit certain Snap-on ratcheting screwdrivers due to them being similar in design. Holds 6 standard 1/4 inch screwdriver bits and fits…

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
67
Polubienia
10
Ocena
0
P
PrintablesAinon3Dtisk

Easter Rattle, Ratchet

Hello, Welcome to my profile, full of models and miniatures :-) I have an Easter Rattle for you, Ratchet. It prints really well. You need to use supports! If you are interested in my work, the links are here:…

Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
11
Ocena
5
P
PrintablesMrRogers

Ratcheting Paper Towel Holder

Not-so-simple ratcheting paper towel roll holder! With optional guide arm! Print either the ROLL_BASE_NOTCHED if you want guide and ROLL_BASE_SOLID if you don't want the guide arm. I've also included a TABLE_GRIP that can be added to any…

Wydruk około 3,04 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
5
Ocena
4
P
Printablesmscalora

Yet Another Wrench Tray - 6 wrench SAE GearWrench ratcheting set

I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…

Wydruk około 5,09 €–6,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
19
Ocena
0
P
PrintablesLuc Dunn

Ninja Hand Claw Scratcher

Pets or annoying loved ones need scratching so often it makes your hands tired? Do it the Ninja way, and put a set of claws on your hands instead. Saves those tired forearm muscles! Have a little Ninja-in-training who keeps tearing up…

Wydruk około 2,77 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
49
Polubienia
14
Ocena
5
P
PrintablesPeter Farell

First King Hotu Matua's Toromiro Back Scratcher

Hotu Matua is a central figure in the oral traditions of Easter Island (Rapa Nui). He is often described as the island's original settler and the first king of the Rapa Nui people. According to the legends, Hotu Matua arrived on Easter…

Wydruk około 5,99 €–7,32 € nettoWstępna wycena jednego wariantu

Pobrania
38
Polubienia
20
Ocena
5
P
PrintablesZbyněk Král

Telescopic Back Scratcher

The idea of making a telescopic Back Scratcher is not bad at all. Unfortunately, the final design is bad, as usual... Let's fix it! Print instructions: Material: PLA Used Filament: Fillamentum PLA Extrafill - Traffic Red (RAL 3020,…

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
29
Polubienia
13
Ocena
0
P
Printableshangbar3d

Back scratcher Dyson theme

Used PLA on MK3S+. Print in place. if you print the parts separately, you won't be able to assemble it! . Inner ring at the main base is separated part in case you want multicolor print. Some support removal to make the hinge rotate.

Wydruk około 15,88 €–19,41 € nettoWstępna wycena jednego wariantu

Pobrania
28
Polubienia
22
Ocena
0
P
PrintablesAlvomane

Ergonomic Twirler for the Hazet 810R or Inbus Flow 73424 Bit Ratchet Screwdriver like WERA 838 | Ergonomischer Zwirbler für den Hazet 810R oder Inbus Flow 73424 Bit Ratschen-Schraubendreher

EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
4
Ocena
5
P
PrintablesNuisance

Engineer dr-55 Ratchet Screwdriver holder for SKÅDIS

This is a dr-55 Ratchet Screwdriver for the Ikea skadis pegboard.

Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
2
Ocena
5
P
PrintablesMath

Bosch Ratcheting Screwdriver mount for Skadis

Remix for a Bosch Ratcheting Screwdriver (Bit-Ratschenschraubendreher) with 12 bits that attaches to the IKEA Skadis. The through-hole is 10mm in diameter and the body of the mount was stretched in order to accommodate the 40mm diameter…

Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesSteveS42

Back Scratcher Hook

This is a simple hook replacement for a back scratcher. It is meant to hang on a 3M hook.

Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
3
Ocena
5
P
PrintablesJeyMco

The Tri-monster claw backscratcher

Human hand-sized it is easy to reach all spots on your back and provide a larger scratch area for maximum satisfaction. Pros: Large size 3-sided easy to reach everywhere on your back great scratch satisfaction can also be used without a…

Wydruk około 5,50 €–6,72 € nettoWstępna wycena jednego wariantu

Pobrania
9
Polubienia
4
Ocena
0
P
PrintablesOwen Burkitt

tratchen pads

tratchen pads

Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesFearless

Motorcycle Helmet Hanger for ratchet type straps

My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.

Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesScrapyCoco

Upgraded Ratchet Toothpaste Tube Squeezer

I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…

Pobrania
13 539
Polubienia
1476
Ocena
4,82
P
PrintablesDominsch

Robust Zipper pull replacement (Ratchet)

Might be slightly over-engineered, but I always keep a few different sizes on my key-chain. That way I'm always ready, when a zipper pull on or around me breaks. Saved me and my friends a bunch of times already. Print recommendations:…

Pobrania
8794
Polubienia
2950
Ocena
4,79
P
PrintablesLumanieri

The Original R.E.P Ratchet Wrench - 1/4" Hex Bit Ratchet Wrench Tool and FIDGET TOY!!!

Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…

Pobrania
8519
Polubienia
2173
Ocena
4,83
P
PrintablesFreddyZ

ratcheting mini screwdriver

I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…

Pobrania
7430
Polubienia
4011
Ocena
4,69
P
PrintablesTomoDesigns

Ratchet Fidget

An easy print-in-place ratchet fidget that makes a satisfying sound. Just print it out and turn it around for the cool well known ratchet sound. You do not need to use any supports. It is fully print in place . It can help to use a brim.…

Pobrania
7420
Polubienia
956
Ocena
4,73
P
PrintablesMikolas Zuza

Ratcheting capo (remix)

This is a remix of the awesome Ratcheting Capo by LoboCNC . Print it in place, no supports necessary. It works (surprisingly) really well. I've printed a few and I keep them in all my guitar bags because I often forget my main metal one…

Pobrania
6144
Polubienia
768
Ocena
4,6
P
Printablesflup52

Clicking Ratchet Fidget Ring 2.0 (Print-in-place)

This is a redesign of my original Ratchet Fidget Ring now optimized for more clickiness. Overview The ring features a ratchet mechanism to make it click and can be printed in one piece (print-in-place). The inner diameter is 18mm but I…

Pobrania
5426
Polubienia
609
Ocena
4,57
P
PrintablesFloro

Ratchet Clamp - Cable Management

Similar design to injection molded ratchet clamps you can find on the market. I use it to organize power cords. Hooks snap firmly in place but can be opened by twisting. The inner diameter is around 35 mm. Haven't tried resizing in a…

Pobrania
4952
Polubienia
1528
Ocena
4,89
P
Printablesjimerb

Ultimate Back Scratcher - 4 Modes!

The Ultimate Backscratcher Let's face it, you're itchy! You're skin is crawlin! Help has arrived. Features FOUR MODES: Normal - A good ol' scratch Aggressive - For when you just got done rolling around in fiberglass insulation Pinpoint -…

Pobrania
3355
Polubienia
499
Ocena
4,68
P
PrintablesMagmabow

Print-In-Place Ratchet Driver

Optional Magnet: ( 5mm diameter, 2mm depth) Print Tips: - Print with PETG (Tested to work nicely) - The files are provided in the “wrong” orientation. Make sure to flip the model upside down in your slicer - A small amount of WD-40 makes…

Pobrania
3281
Polubienia
1385
Ocena
4,38
P
PrintablesLloyd Keays

(72mm) Upgraded Ratchet Toothpaste Tube Squeezer

I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…

Pobrania
3269
Polubienia
369
Ocena
4,87

Scratch Attach - Printed, Telescopic Back Scratcher v1.0

Heads-up: There is now a beefier version 2, in case you have grandkids who tend to break stuff while playing with it. :-) https://www.printables.com/model/1499800-scratch-attach-printed-telescopic-back-scratcher-v This short (90 sec.)…

Pobrania
2978
Polubienia
550
Ocena
4,96
P
PrintablesMakerT

One-Hand Ratchet Lace Closure

Update : Design knob added for small model Tested M3 base which can be fix with M3 countersunk 6/8mm without feeling on foot. One-Hand Ratchet Lace Closure Traditional shoelaces often require two hands, finger dexterity and the ability to…

Pobrania
2855
Polubienia
2128
Ocena
5
P
PrintablesSHR3D.eu

Pendant ratchet for bits. / Přívěšek račna na bity.

[EN] Simple keyring with ratchet function for bits printable in one piece without gluing or inserting additional parts. Serves as a nice demonstration print, or a quick to make (approx 45min) gift. For a successful print, it is advisable…

Pobrania
2794
Polubienia
794
Ocena
4,89
P
PrintablesIvIast3r

Magnetic ratchet holder

A simplistic design that works against the metal wall of your toolbox or face down in your toolbox. Works best with Snap-on ratchets but will fit other brands with similar body styles. Magnets used were 6mm x 12mm x 3mm N52 neodymium…

Pobrania
2759
Polubienia
302
Ocena
5
P
PrintablesMKS

LTT Screwdriver, With Ratchet

Introducing the unofficial 3D-printed LTT screwdriver clone, equipped with a removable ratchet mechanism and storage for six bits. Assembly is simple, with potential for minor adjustments using glue if needed. Ongoing enhancements ensure…

Pobrania
2759
Polubienia
1251
Ocena
4,61
P
PrintablesTofuMonster510

Magnetic Ratchet Organizer / Holder - Improved

Magnetic to attach to the metal bottom of a toolbox and hold the ratchet better. Modular design allows for customization to your needs. The integrated linking pin can be easily cut off with flush cutters. Should fit most ratchets, 1/4…

Pobrania
2713
Polubienia
253
Ocena
5
P
PrintablesSteveS42

Ratcheting Toothpaste Winder (remix)

The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…

Pobrania
2675
Polubienia
594
Ocena
5
P
PrintablesHami

Only for men back scratcher ;-)

Back scratcher in the shape of a crowbar . The parts can be printed in different colors and glued together. I recommend tree supports ---------------------------------- Rückenkratzer in Form einer Brechstange. Die Teile können in…

Pobrania
2451
Polubienia
1113
Ocena
4,75
P
PrintablesA2S_dESIGN

Cat scratcher (stackable)

This scratching post for your cats can be installed in any corner of your house. My cats love to scratch on it. To install it on the corner of the sofa, you can stick it with some Velcro strips. It can also be installed in a wall corner…

Pobrania
2259
Polubienia
944
Ocena
4,86
P
PrintablesMagmabow

No Nonsense Back Scratcher

simple back scratcher

Pobrania
2249
Polubienia
249
Ocena
4,96
P
Printablesradicalreel

Ratchet strap reel (clicky assembly)

https://paypal.me/radicalreel VERSION 4 OUT NOW EXCLUSIVELY ON MAKERWORLD! Link: https://makerworld.com/en/models/1267206-ratchet-strap-reel-v4-clicky-assembly#profileId-1293172 24/10/12: Cleaned up: Archived old data and updatd…

Pobrania
2227
Polubienia
661
Ocena
4,86
P
PrintablesJipcutter

back scratcher

aggressive back scratcher. no supports

Pobrania
2151
Polubienia
175
Ocena
4,96
P
PrintablesChris J.

Gridfinity Tool Box Organization (Ratchets and Sockets

Bunch of models I designed. Photo shows some of them in use. Not all the items in photo were designed by me, if you want any of there models reach out. If anyone wants to use these, remix them or whatever feel free to. If you need a…

Pobrania
2098
Polubienia
698
Ocena
5
P
PrintablesRoland Deschain

Ratcheted Toothpaste Tube Squeezer

I loved the concept behind Luke's 3D's original model but it didn't fit my daughter's toothpaste. I also found the model quite hard to assemble as the tolerances were tight and there was little to no horizontal expansion (elephant's foot)…

Pobrania
1947
Polubienia
241
Ocena
4,94
P
PrintablesGarage_Tinkerer

Ratchet Strap Organizer

See instruction video below. There is a large and small version. I printed them in PETG with 5% gyroid infill, but PLA would work just fine. EDIT: I had feedback that the tool should be wider than the strap. I made them as wide as the…

Pobrania
1867
Polubienia
796
Ocena
4,64
P
PrintablesUnicorn3D

Ratcheting carabiner / cable clamp

This ratcheting cable clamp / carabiner is extremely easy to print (no support, print in one piece) and works great with PLA, PETG or other materials. I am using it also on the beach to carry my flip flops around by ratcheting them to my…

Pobrania
1782
Polubienia
436
Ocena
4,75
P
Printablesfifindr

Ratchet Strap Winder

EDIT: the shape of the outer prongs has been modified so that they dont bind when winding. Use 6 walls + 8 bottom/top layers. A simple drill-powered tool that quickly rolls up ratchet straps, making storage much faster and keeping your…

Pobrania
1741
Polubienia
723
Ocena
4,69
P
PrintablesFreddyZ

Print-In-Place ratcheting screwdriver

So after I took on Martin Rigatoni's challenge with this screwdriver and LoboCNC promptly took me up on my unintended challenge with a much improved design and we saw many more _ designs by members of the screwdriver gang I wanted to…

Pobrania
1709
Polubienia
415
Ocena
4,62
P
Printablespkarny

Collapsible Scratcher

Mosquitos…. They always bite in the wrong places. Here is my answer on how to scratch the back of your body when those tiny bloodsuckers find a way to get to you. Replaceable Heads This was printed with Fusion the threaded hole has the…

Pobrania
1634
Polubienia
349
Ocena
4,2
P
Printablesmuddymaker

Back Scratcher

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Do you have an itch you cannot reach? I have the solution…

Pobrania
1614
Polubienia
216
Ocena
4,8
P
PrintablesMartin Rigatoni

Reversible Ratcheting Screwdriver

It's my turn again. I wanted to design a reversible ratchet that worked without moving an axle. I wanted it to be as small as possible and I wanted to keep the aesthetic of my first screwdriver keychain . This is what I've got. It's 50 mm…

Pobrania
1545
Polubienia
623
Ocena
4,75
P
PrintablesBrian Chu

Back Scratcher 27.5cm

I created it for my dad and thought it might be useful for others. There's a long finger one and a short finger one. Print instructions Change infill→fill angle from 45° (default) to 83° #edited 20231020

Pobrania
1539
Polubienia
108
Ocena
4,85
P
Printablesshiura

Print-in-place Palm Ratchet Screwdriver Knob

3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…

Pobrania
1527
Polubienia
270
Ocena
4,71
P
Printablesluchocarreno

Ratchet Clamp Print in Place

This is a print in place clamp, can be scaled up, tested up to 200%. Printed in PETG, 0,2mm layer, 40% infill. I use it for woodworking, can hold small pieces for glue-ups.

Pobrania
1430
Polubienia
304
Ocena
4,82
P
PrintablesNautilus Forge

IKEA SKADIS - Ratchet / Socket Wrench organizer + tools

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Pobrania
1414
Polubienia
243
Ocena
4,55
P
PrintablesChef Dan BG

Modular ratchet holder / stand

these hold your ratchets in a vertical sideway matter. great for clean organized ratchet / socket drawers this uses 12x3 magnets

Pobrania
1368
Polubienia
134
Ocena
5
P
PrintablesOld Lady

Back Scratcher

PLA 4 Walls 0.2 mm Layer Hand: 100 % Infill Rod: 60 % Infill, support only on the plate

Pobrania
1350
Polubienia
268
Ocena
4,4
P
PrintablesZwoop

Ratchet Remix

The original ratchet design is pretty awesome, but for the bigger model, I felt that the moving arm is just too short. This makes it difficult to wrap something that's reasonably thick and/or heavy. Extending the arm pre-loads more…

Pobrania
1350
Polubienia
289
Ocena
4,94
P
PrintablesG4ZO

Ratchet screwdriver (Print in place)

In version 3 The bit can be inserted up to halfway. In version 4 you can insert the bit all the way inside, so that greater torque can be applied before it fails. Version 5 has an upgraded hole for the bit, and also a place to add A small…

Pobrania
1319
Polubienia
210
Ocena
4,67
P
PrintablesDR95

Ergonomic Cat Cardboard Scratcher Tool (Supportless)

The Ergonomic Cat Cardboard Scratcher Tool is designed for cutting cardboard strips approximately 33mm in width, perfect for creating custom cat scratchers that can be flipped and used a second time once worn down. The tool securely holds…

Pobrania
1300
Polubienia
262
Ocena
4,93
P
Printablesyuya

4-60 beyblade X drake ratche

It based on Beyblade X 4-60 ratchet and it's just a version that you can assemble or change with your own modified parts

Pobrania
1258
Polubienia
57
Ocena
5
P
PrintablesRedstone Fusion

Back Scratcher

I made myself a back-scratcher and wanted to share the models so others could too printed on .25mm with no supports in PLA

Pobrania
1215
Polubienia
69
Ocena
4,8
P
PrintablesAneoPsy

MiniHex Bit Ratchet

MiniHex Bit Ratchet Introducing the MiniHex Bit Ratchet – Your Compact Companion for Screwdriving! Engineered for efficiency and designed with convenience in mind, this small yet mighty tool is set to revolutionize your screwdriving…

Pobrania
1196
Polubienia
376
Ocena
4,3
P
PrintablesLinabe

Foldable Back Scratcher

Updated with 2 longer arm models. Now with better reach to scratch the back! I designed this compact, foldable back scratcher to place in car. Printed in PETG at 50% infill.

Pobrania
1107
Polubienia
84
Ocena
4,43
P
Printablesjaponicki

supportless cat scratcher cardboard strip cutter

a friend wanted a cardboard strip cutter to make cat scratchers, I found one here but it needed supports to be printed so I decided to modify (or rather redesign) it so it can be printed with no supports. This one requires a threaded…

Pobrania
1036
Polubienia
216
Ocena
5
P
PrintablesDrexplotionpd

Gridfinity Ratchet Holders

Love organizing? we have you covered. by using these in combination with the Gridfinity sorting system, you too can organize your ratchets in whatever order you want them to be. Update 4/5/2024: Added small 1x2 stand for stubby ratchets…

Pobrania
998
Polubienia
109
Ocena
4,86
P
PrintablesEric Woo-Shem

Ratcheting Squeeze Fan

What makes this squeeze fan unique? This squeeze fan uses a printed ratchet and spring to allow the fan blade to spin (mostly) freely without forcing the movement of the squeeze handle. All parts are 3d printed, except for two M3 screws…

Pobrania
961
Polubienia
474
Ocena
4
P
Printableseveve05

Ratcheting Capo (stronger)

Print without supports After printing you have to break-loose the hinge. Optionally you can add a softer material (electrical tape/heat shrink) to the arm and body.

Pobrania
956
Polubienia
53
Ocena
5

GIGGA SCRATCHA - Extra-Long 500mm Back Scratcher

GIGGA SCRATCHA™: the Rolls-Royce of back scratchers. After trying plenty of back scratchers that were too short, too flimsy, too sharp, or just generally disappointing, I decided to make the one I actually wanted. The result is the Gigga…

Pobrania
939
Polubienia
260
Ocena
4,67
P
Printablessifi

Ratchet Strap Corner Guard

What is it? This is a model I designed to protect the edges of boxes or other things you may be hauling from being rubbed down by ratchet straps. How to use it There is a 1, 2, 3, and 4 inch version. Each for the respective strap size.…

Pobrania
920
Polubienia
582
Ocena
5
P
PrintablesIangenuity

Cat Scratcher Cardboard Strip Cutter No Supports No Heat Set Insert

This device is designed to print without supports and be used to cut cardboard strips to make a device for cats to claw at and scratch. This devices requires a standard utility blade and works well with an M3*10, M3*12, or M3*14 screw. An…

Pobrania
917
Polubienia
117
Ocena
5
P
PrintablesAneoPsy

MiniHex Bit Ratchet v3.1

Introducing the MiniHex Bit Ratchet V3 – Your Compact Companion for Screwdriving! Engineered for efficiency and designed with convenience in mind, this small yet mighty tool is set to revolutionize your screwdriving experience. 🙏 Thanks…

Pobrania
913
Polubienia
319
Ocena
4,67
P
PrintablesLoboCNC

15-in-1 Reversible-Ratchet Mini Driver

First, FreddyZ took up Martin Rigatoni 's challenge to make a miniature ratcheting screwdriver. Now I've decided to take up FreddyZ on his (probably unintended) challenge to make a miniature reversible ratcheting screwdriver. We all know…

Pobrania
902
Polubienia
494
Ocena
4,73
P
PrintablesChad Allen

Ratchet Fidget Toy

A ratcheting fidget toy which makes a satisfying clicking noise as it is operated. Hold the middle of the round part with one hand and the frame in the other. Slide the center part back and forth. The center will click and spin. Also see…

Pobrania
889
Polubienia
146
Ocena
4,71
P
PrintablesCoolNeal

Ratchet strap winder

Place the strap between the Forks then use drill to wind slowly

Pobrania
878
Polubienia
92
Ocena
4,5
P
Printablessmysnk

Ratcheting Toothpaste Squeezer

I found that other toothpaste dispensers on Thingiverse required assembly or were a bit clunky in their design, especially around the part where you turn the cylinder in the middle and various locking mechanisms. Others didn't even…

Pobrania
875
Polubienia
88
Ocena
4,23
P
PrintablesPyrex

150mm (6") Ratcheting Hose Clamp

A simple and easy to print hose clamp for 150mm / 6" hose systems. Great for 150mm/6" exhaust/ventilation systems and any 150mm or 6" diameter object that needs clamping. Stop feeding big hose clamp and print one yourself and save the…

Pobrania
874
Polubienia
143
Ocena
4,6
P
PrintablesAneoPsy

MiniHex Bit Ratchet V2

MiniHex Bit Ratchet V2 Introducing the MiniHex Bit Ratchet V2 – Your Compact Companion for Screwdriving! 📢 V3 available here Engineered for efficiency and designed with convenience in mind, this small yet mighty tool is set to…

Pobrania
871
Polubienia
213
Ocena
5
P
PrintablesNick__Furry

Beyblade X ratchet

print on PETG or something impact resistant you will need 2 10mm long wood screws, i think the nomination is 3.5x10

Pobrania
866
Polubienia
37
Ocena
5
P
Printablesflup52

Ratchet Fidget Ring Print-in-place (Clicking!)

Update I redesigned this model. You can find the new version here: https://www.printables.com/model/859158-clicking-ratchet-fidget-ring-20-print-in-place A simple fidget ring featuring a ratchet mechanism to make it click! Have fun! This…

Pobrania
842
Polubienia
51
Ocena
4,43

Hand Back Scratcher / Kitty Scratcher

A design for a whimsical hand-shaped back scratcher. Cats love it. Designed to fit atop a 3-eighths-inch dowel (0.375 inches, 9.525 mm). Printed with minimal support on the backside of the hand at 0.2 mm. So far no layer adhesion issues…

Pobrania
816
Polubienia
81
Ocena
5
P
PrintablesTor G

Tired of scratches in the print bed

Tired of scratches in the print bed, this solves the problem, this works very well to remove the print from the print bed. It is made of PETG so if you want to use the G code you are welcome. Have used this on many prints and it works…

Pobrania
816
Polubienia
78
Ocena
4,67
P
PrintablesMe2d

Lottery scratcher

Tool for a sratch lottery. Easy to print. No support needed. Print instructions Easy to print, on infill dostn't matter. With more infill will be model more durable. Feel free to share.

Pobrania
785
Polubienia
58
Ocena
5
P
PrintablesRobert Schiele

Back Scratcher

I printed with PETG, 0.2mm layer height, and 20% infill. In the end, the precise settings don't matter much with this model. No supports needed.

Pobrania
771
Polubienia
71
Ocena
4,56
P
Printablesmorp

Ikea Skadis Ratcheting Pliers/Crimpers holder

This is a rework of some similar models on here to be easier to print and more universally fit larger and different branded ratcheting pliers. Has a recess for the ratcheting latch and a lip on the front to keep pliers in place. Tested…

Pobrania
769
Polubienia
136
Ocena
4,97