6017 modeli
Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…
4x 3mm countersunk machine screws STEP file added by popular demand
I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…
MODEL DETAILS Modular, customisable nozzle holders for RapidChange Revo nozzles. Mounting options for different printers can be found on our Printables profile. Size Information: Each Revo Nozzle is engraved with its size. It can be found…
The wires (or component, such as a switch or LED) are held by the flexible fingers so that you have two hands to hold the soldering iron and solder. The springs added to the original design provide greater flex in the fingers and a wider…
A fun, interesting design that prints flat with very little support, and then can be revolved to many different configurations. A great gift to win someones heart! :-) Prints well with PLA, only support needed is for the string loop at…
This is a remixed version of an airbrush holder. Base was shortened to allow brush to sit in holder, cup resting fully against front edge, with a rigid hose that drops off edge of table surface. Added curved edges on main body. Opened…
E3D Revo nozzle holder. It can hold up to 6 nozzles. Enjoy! Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15%
This is a solution to store all your Arkham Horror Game Assets. It stores all cards and tokens of the game. It works well with the original Gamegenic card sleeves. The cardbox may be too tight for the older original Fantasy Flight Games…
A dosing funnel specifically designed for the WDT (Weiss Distribution Technique) that is compatible with 54mm Breville/Sage portafilters. This funnel captures stray coffee grounds that would otherwise be lost during grinding. Key features…
Miniature of a Colt SAA Revolver (Storekeeper or Sheriff model) with classic octagon barrel. Prints as 6 different parts that are press-fit together. Simplified model: The hammer is fixed and no loading gate. Trigger moves but does…
Crevice tool for vacuum cleaners with tube diameter d35 mm (tested on Thomson). Possible extension from 120 mm nozzle up to 280 mm. Printed with Pusament PETG. Layer height 0.3 mm should be enough since its not a mechanicaly exposed part…
1/4", 3/8" and 1/2" reveal gauges to make window and door trim installation fast and foolproof. Each gauge is labeled with it's offset. The .3mf file is set to use a different color for the text labal.
Loading model in Prusa slicer you must reduce to 98 percent, orient bottom to build plate and rotate model 90 degrees. I have included a tested print file for mk2.5S that shows orientation to build plate as well.
This 3D sculpture is of two hearts together forever. It makes a great Valentines Day gift for your sweetheart. This model is easy to print in two colors because the hearts and the inscription begin to print at the same layer. Use the “add…
Combined and designed this setup from the best ideas and designs I could find (in my humble opinion of course) Features: Single piece backplate. No loss in build volume. Nozzle in original position. Cable routing thru backplate for nice…
Revision door, access door 10x10 cm (external measurement). Printed with PETG. There are two separate STLs, you need to print them together as “print in place”. If you print the STLs separately, you won't be able to assembly the door.…
This Minecraft Lantern inspired model brings cozy pixely warmth to every home. Caution Never use real tealights, candles or other burning materials with this model. Best case they're starved of oxygen, worst case your home burns down.…
Revell Dassault Aviation Rafale C Wall Art Silhouette model. Adjustable size. I accept model suggestions
This mount allows you to hang your Expand-It attachments using the Ryobi Link system. Fits in the standard orientation as well as inverted (see the pictures.) Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of…
Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…
Plain & simple; a raised multicolor sign for your office or workshop that is meant to parody a ‘Sensory Deprivation Chamber’ sign. Enjoy, and let it be a reminder that its good to take breaks every once in a while. Recently revisited with…
Just a simple collar that is redesigned from the previous model. Version 1 of the redesign is meant to be printed in TPU and it slides overtop the knobs. It is crude but works. Version 3.5 is a bit more detailed. It was meant to be…
a remixed version of the fidget revolver
My first “thing” ; a 360 degree adjustable and stackable reverse bowden system designed for my Prusa MK3s frame. It swivels and looks like a tap, so I'm calling it the "Reverse Bowden Tap" 😊 Design I designed this for my custom dehydrator…
Set of 4 coasters with Emoji Theme 95mm x 5.6mm approx Added STL Files
Wall Art silhouette model of the Lamborghini Revuelto.Adjustable size. I accept model suggestions you might want or like
E3D's mount for upgrading the Prusa MINI+ with their Revo Micro hot end, modified with an added strain relief for the PTFE tube. This version requires two M3 square nuts for a more secure connection; grab them from your spares bag! Prints…
Bust of Darth Revan Knights of the Old Republic.
Never forget whose turn it is next with this Turn Order Token. Works with any turn-based card or board game. It works especially well for games in which the turn order can change, such as UNO™. Flip the token over to reverse the arrow…
Modelo más corto y con corte, para evitar choques con el extrusor a partir de Z 180. Altura 8,5 y 7 cms – Reverse Bowden Short Connector, for Prusa MK3s frame`s and Ikea Platsa furniture. Large and short versión
Tiskněte v měřítku 10% K sestavení je potřeba 6ks šroubků M3x20. Víko, těsnění a klapky jsou z původního modelu kompatibilní.
I bought the e3D Fun Pack of nozzles to experiment with different sizes but got frustrated with the little tin they come in - there's no hole for your original 0.4mm nozzle and you need to check the nozzle for size every time you switch.…
[EN] Simple three-colour heart-shaped pendant. The pendant is adapted for multi-colour printing in layers using the M600 command (or simple manual filament change). The ideal layer height for printing is 0.25mm (then exactly 2 layers per…
Re-design of the inner box to have the additional chamfer and marking on the narrow side so that the lid can close without catching on it. Everything set up ready to print in the 3mf (import as project), just change the printer and the…
Nozzle Box for EVO nozzles. Made in PETG. Storage space for 7 Nozzles.
Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…
the Breville Cafe Roma uses 51mm portafilter basket. This model allows you to dose grounds into a cup with a detachable funnel. The dosing cup then fits nicely into the 51mm portafilter basket. The funnel also has a circumferential groove…
Schlüssel zum Öffnen der Revisionsöffnung am Frischwassertank im Camper Wohnmobil Wohnwagen
I designed this beautiful frame as a gift where the contents can be revealed by removing a sliding cover. On the inside, there is a recess that holds a piece of paper or thin cardboard in A5 format with the picture or text on it. With the…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Shawn Gano's…
Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…
The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…
I created insets for the Revopoint Inspire 2 camera, tripod, phone holder, cables and mini turntable and Lids with Logos for the 180x180x50mm case. Printed with PETG.
This is an modification of the original RPi4 UPS case by Jason with changes and upgrades for the newer revision of the GeeekPi RPi UPS hat (aka EP-0136) for Raspberry Pi 4 . UPS Link: https://wiki.52pi.com/index.php?title=EP-0136…
The Rathtar's Revenge was a pirate flagship used by the Ganguls during the High Republic Era. It appeared in Season 2 of Young Jedi Adventures. Dimensions Length Width Height 185mm 112mm 56mm There are no official dimensions for this…
This clamp prevents rattle from the drip-tray on the Sage/Breville Bambino plus. Easy to remove for cleaning the drip-tray. I printed this in PLA
My first Grandchild. I had to make something for the Gender Reveal Party. I combined two spinners into one and did a 3 color change print. It was a hit. I merged the two spinners in prusaslicer.
Original part flipped, notched for gantry support, added a hole for a ty-rap and made a mounting plate for a Creality filament sensor. Just mark the sensor mounting holes, drill them, and insert heat inserts. Or drill small holes and use…
Revision 2 Dies Das ist Revision 2 des offenen Cookit Deckels und ersetzt die beliebte Vorgängerversion . Diese Revision ist passgenauer und vor allem formstabil. Die Vorgängerversion verformte ich mit der Zeit vor allem bei…
Dvoubarevný žeton do košíku o velikost 10Kč. Žeton se skláda ze dvou částí - žetonu s výřezem loga a objektu ve tvaru loga. Žeton s výřezem na logo je navržen na první vrstvě, který by zároveň měla být zpomalena na ⅓ rychlost ( cca 8mm/s…
Needed to replace the blade on my multitool for working at my school.
Many cities are frequently burglarized. Often, the burglars are not afraid to break a window. At my home has already been broken into twice, in my job I often have to deal with burglaries and have made the experience that burglars are…
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…
für audiophile Genießer - eine Schutzhaube, um das feine Laufwerk vom Kassetten-Deck vor Staub und Dreck zu schützen.
Just some simple interlocking coasters you can use to store: Bath oil bottles Face creams Whatever other bottle you have that's sticky or tends to leak They're designed to fit Kneipp bath oil bottles but should fit most. You should be…
zářící vánoce si přejí všichni. tak proč nezkusit toto.. bál jsem se aby se těsto nepřipalovalo v tenkých partiích, proto je znak tak malý ** doplněno - njn, ty dírky jsou moc malé, tak ještě revidovaná verze s větším symbolem Everyone…
New rotary switch handle for mixer base rotation speed for Breville SHM2 mixer. The factory one is too small and impossible to turn if you hands are slippery (like when you are baking!). This design is a granny-proof sized knob that is a…
I am using E3D's Revo Micro on the Prusa MINI for a while now and am very impressed so far. I also like the original mount E3D designed for Revo but it lacked some color so I decided to make this multi-color version. I already printed it…
Here's a compact case that holds an Eleclab 7" touch screen Revision C. Since that screen is also a RPI add on, it also holds the raspberry Pi. The case and case back should be printed separately. Use snug supports to print the case, they…
Hrošík magnetka (Hippo magnet) Velikost magnetu: 10 x 2mm Varianta s vložením magnetu (pauza) a s lepením magnetu (až po tisku) 4 barvy filamentu – světle šedá, růžová, bílá, černá Velikost vrstvy 0,2 – nastavení vložení magnetu a výměny…
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
Use this if you want to do a z-transpose of a Z-chain you got from an LDO Rev D Voron 2.4 kit, and want the chain to sit flush and level, without any bending of the chain.
Bino plate with recess for Acra mount plate at bottom. Integrated slots for straps to hold binos down. Printed with PLA and 6 walls 25% infill, very rigid. Insure that you print the plate upside down that the recess is on top.
@blakekrone's original design has been an excellent addition to my Etherscope toolkit, but I wanted something a bit more compact to store the dongles for my LinkIQ. Printed on CoreOne 0.4mm nozzle diameter, 0.2mm layer height, PETG
Print this in original orientation or use the attached Gcode (PETG / i3 MK3S) I used double-sided glue to give the wedge a place to fight mouse cables for the rest of its life.
This is a remix of the original with two key changes. First, it is 100mm on a side, making stacking it along both the X and Y axis, and calculating the offset when you want to engrave multiple cards at once, simple. Second, the slots in…
I wanted a simple, semi weatherproof camera housing for an RPI/MotionEye camera.this one uses a minimum of fasteners. I made a bulkhead USB to microUSB cable for power, but a a microUSB connector (to mate up with the RPI) will fit easily…
A quick remix of Bookaroo 's Floppy Emu Case for the BMOW Floppy Emulator . I dropped logos to .35, added SD / Apple. Added m2.5 screw threads to top.
A Cooling fan replacement chute because the original does not fit anymore if the hot end is replaced with a Revo six.
I have a pretty free-spinning spool and with the constant retraction, advance, retraction, etc. I can wind up with several loose windings on the spool. Occasionally one can jump over the edge. I made this arm to prevent this. It clamps on…
I needed a junction box to hold a small 5V PSU-Board as well as a Relais-PCB within an REV-Ritter cable duct. Here is an qick model for that. It can be fixated wihin the duct with the two T-Screws. I left some space on the bottom of the…
Simple revo mount for ratrig toolhead V1 that use Rapido, use 2 M3x8 screw. This is a mod of the original Ratrig files. Use the step in the files section to modify.
In the Ford Transit MK2 (1985) with the dashboard that has a recess for a speaker, I have constructed an insert holder for a BOSE Revolve+. The Mobile Speaker fits perfectly into the insert and can be used as a Remote Soundspeaker in your…
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
Holder is a snug fit for the Blueland tablet tin box. Insert x4 10 mm OD x 10 mm long neodymium magnets. I used some packing tape between the box and the back of the lid to create a living hinge, works quite well.
GCode is for a CoreOne with 0.4 HF nozzle and ABS print material. Height modifier set to help print the ziptie pieces
Projekt vychází z budoucího využití při výuce v mateřské škole, procvičování jemné motoriky a osvojení si jednotlivých barev. Jedná se o zábavnou balanční hru s barevnými kamínky.
This limits how far my refrigerator door can swing open, preventing it from hitting a newel post. This is made specifically for my GE ENERGY STAR 21 Cu. Ft. Fingerprint Resistant Stainless Steel Bottom Freezer Refrigerator - GDE21EYKFSS
Desk organizer w/ cup and revolving tray. I included a ¾" Hex Wrench model as a bonus! You need 8 6mm ball bearings, but it's possible to use this without them (it just won't turn smoothly). To insert the ball bearings, hold the tray…
Zugegebenermaßen sieht die spezielle Konstruktion zum Anschluss unseres Saugroboters nicht sehr hübsch aus. Darum wurde diese Abdeckung darüber gesetzt. Vielleicht dient sie anderen Menschen als Anregung. Translation: DeepL Admittedly,…
služi na odkladanie nastrojou
Remixed the spinning revolver pen holder by DigChaos_633 as a memorial for my dear friend and Author R. S. Belcher. Wanted to upload this in a place were his family and friends could easily find and download the model for personal use…
Charlotte Rampling as Bene Gesserit Reverend Mother Mohiam.
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Źródło oznaczyło ten model jako treść 18+.
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
The Orbit Revolver is my fully functional toy blaster designed to be satisfying to handle and as accessible as possible. It is currently my favorite printed model across all my years of 3D printing. I would recommend watching the YouTube…
I've re-made the revolver based on original EDUNBR3D's design implementing some changes for easier printing. I sliced in OrcaSlicer from STEP files using tree/organic supports. You can see my support parameters on included pictures.…
Intro A clean and elegant twisted spinning top that spins incredibly long and stable . Perfect as a small desk toy, fidget, or simply a beautiful kinetic object. The twisted body is not only a visual highlight – it also helps to keep the…
2023.Jul.7 Strengthening of foot section, correction of overhangs, etc. ーーーーーーーーーー Hot glue guns are really unstable things. They can unintentionally stain your desk, so I made a stand to support them securely. In order to strengthen the…
jaw hinge pins use m3x12 screws and m3 nuts feel free to use whatever you want for that if those pins don't suit your needs it also allows you to operate the jaw with your chin like the actual mask should
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Thanx to the fantastic work by DeSteiner (as well as his help in making the custom text), I was inspired to make a few custom parts for his prop revolver. All parts have been test printed, and will have the same fit as the original parts…
The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…
If you want ALL the versions, you can go grab them all for FREE on our patreon page: https://www.patreon.com/SEREV3d We reworked the inside structure completely: ✅ The big lantern Prints in under 8 hours (compared to +11 hours of the 2024…
