2472 modeli
After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Just a simple tool to set the correct height of the Pinda or Minda probe. Yes i know this is also the thickness or a simple calbe-tie! But i ran out of those so this little print came to the rescue. Print instructions Just print at 0.2 mm…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is a magnetic holder for temperature sensors. You'll need a 8x4 or 8x3 mm magnet. There are three versions of the holder. The smallest one should work with sensors of ~4 mm in diameter, the middle one fits sensors of around 4.9 - 5…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
advise printing in abs due to its proximity to hotend
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
I couldn't find a bust of J Robert Oppenheimer for our Physics classroom that was both: Free Good So I designed this. I started with Luma AI Genie to get the basic shape and then used Blender to make it the way I wanted. I would consider…
Wydruk około 13,76 €–16,82 € nettoWstępna wycena jednego wariantu
Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Small jewelery hanger for rings and chains. 25mm tall and 33.2cm when printed and installed in pairs to fit the inside door of IKEA closet. Fixed to closet door with double-sided tape File is cut in half with a puzzle inspired dovetail…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Triboelectric nanogenerator (TENG) is a new type of generator for “green energy”. In our study, a novel “pause-and-insert” and “print-in-place” 3D printing approach has been devised, employing widely available fused deposition modeling…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Kleiderstangenhalter für 20mm Durchmesserstangen. Leichte und einfache Positionierung durch Mittelloch. Innenabstand für die Kleiderstange = Gesamtlänge minus 2x 3,5mm. Zur Montage: Erst eine Seite Halter verschrauben, dann die zweite…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This tentacles feature a hole fitting an M4 screw. Printing: Make sure to use supports for most tentacles Add a PAUSE at the correct layer and insert a M4 nut
Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu
pH or ORP probe pipe-drilling / holder. It is designed to keep probe safely in the water. Should be mounted behind filtration system but before heater and any chemistry injection system also. Easy to use, just drill hole into the pipe…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Hanger hook for purse, etc. 38mm internal diameter for wardrobe rod. 50mm length of the hanging place. Print tips: supports required
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You need the following 2x M2.5x4.0x4.6 Brass Heat Inserts 5x M3x4.0x5.0 Brass Heat Inserts 6x M3x6.0 Screws (And maybe 2x M3 Washers between probe mount and the extruder motor) 2x 2.5mm Cable tie (For cable management) Fan Duct:…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
hooq is a versatile, usable storage and wardrobe system. The hooks can be positioned freely along the rope. As soon as they are loaded, they get jammed and hold the height. This is how countless garments fit comfortably about each other.…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
3D printable modifications to attach an oscilloscope probe to a low cost magic arm mounted to a Stickvise: StickviseArmBase: Base that goes between the Stickvise and its jaws, onto which a magic arm can be mounted via M5 threads…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This two sided tool is used by my artist wife to create textures and scrape on her canvas. I put one in my tool kit to occasionally use as a probe or scraper in tight spaces. It is printed in PETG with organic supports.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found most of the models out there didn't fit the width of my Fluke 87 meter so I made my own. I decided to use standard ½" metal J-hooks to attach to the pegboard as I didn't want the printed ones to break off and drop my meter. This…
Wydruk około 2,71 €–3,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A napkin roll made from the LOVE stamp design by Robert Indiana.
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
Quick printing test probe to fit the J6 gripper mount on the AR4 robot from Annin Robotics . The probe tip has a known distance (50mm) from the gripper mount plate that you can input into the kinematic model and the PLA is forgiving if…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Simple case for a voltmeter and test probes.
Wydruk około 3,72 €–4,54 € nettoWstępna wycena jednego wariantu
Thermal shields for outdoor measurements using Tesla TSR-4m series radon/environment instruments. The lid can be fixed to the body part using zip ties. Designed/tested to be printed from PETG on Prusa MK3s with standard 0,4 mm nozzle.…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a container for my new Rösle BBQ Probe/Thermometer so i designed it to fit in the Parametric SnapLock Box by Hugo. https://www.printables.com/de/model/805599-snaplock-storage-boxes-parametric Box Parameters Used: Length: 100 mm…
Wydruk około 3,83 €–4,69 € nettoWstępna wycena jednego wariantu
A wardrobe hanger to press-fit into a 8×8mm square tube. The diameter of 20mm works nicely with coat hangers but also fits with key rings. I printed this model with Prusament Galaxy Black PLA with 0.2mm layer height and 15% infill. Bottom…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
wardrobe handle, madlo skříně
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…
Wydruk około 4,03 €–4,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a way to securely attach my scope probes to PCBite. I like the gooseneck that they provide but i'm not a fan of the probes. I wanted to just reuse the scope probes I already owned. The hole on the bottom of the part was designed…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Broom holder to prevent brooms from falling out when the cabinet is opened Hole diameter 4,5mm, with countersink
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
The Compliant Mechanisms Research Lab has worked with Mark Rober and his team to create the world's smallest functional Nerf blaster. Watch his video here ! EDIT 10/16/2023: The ¼-scale files have been updated to a version that latches…
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
This is the robot from the icy snowy planet in the Fifth movie and not screen accurate. Model is finished and print verified. This model is best printed at 100% scale on FDM. SLA/SLS - go as small as you'd like. I find on FDM, 120% to…
Dread Pirate Roberts rapier sword from The Princess Bride Printed in PETG and 0.2 layer height. Supports only needed for the pommel and the guard. Blade pieces are numbered in the upper side: Front[1-4] & Back[1-5]. You need 5 joints for…
Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
Vielleicht kennt der ein oder andere mein Problem. Beim Drucken von Filamentproben verheddert sich das 3D Druck Filament und der Druck schlägt fehl. Doch hier nun meine Lösung für das Problem: ein Filamentaufroller für den Akkuschrauber.…
This temperature probe organizer is designed for the Rubicson wireless BBQ thermometer with 4 mm probes that can be found at kjell.com in Sweden. There is also a step-file attached for easy modification. The parts are intended to be glued…
beacon probe mount designed to work with the stealthburner X carriage. let me know if you have suggestions. thanks printed w/ 23% infill in ABS uses: 2 - 3mm thread inserts 2 - 3x6mm Button head screws ***only tested on a Voron 2.4R2…
BIQU Microprobe STL and STEP file. Found it on the BTT GitHub.
No need for supports. I created a variety of different hangers for different types of jewelry from rings, classic earrings, cufflinks, big hook, Ear Tunnels/Plugs and some blank ones you can modify and remix. Assembly Clean up any…
Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…
Fun toy….. Had to print second one, perhaps wil make 3rd and 4th also :) to print on ender 3 or similar scale it down to 90% in order to fit on bed. Please don't forget to hit the like button when downloading. Thank you!
Is the model edit by RomuloAmericano on https://www.thingiverse.com/thing:4891694 for Echo Dot 4 & 5 gen
Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…
I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…
Sylvanian Families Wardrobe. I printed this in PLA. Print the main body on its back facing up, supports are needed for the inside top section. Print the doors flat on their back facing up, no support needed. Once printed the doors pop in…
Intro A versatile and functional 3D-printed rod holder designed to help you build custom wardrobes, closets, or storage racks . This model serves as a sturdy mount for a closet rod or clothing rail — just print, assemble with two pieces…
My first product, my own design and works great. I needed space to hang clothes, and using an old wooden wardrobe rod required imporovization. I hope this will work for a long time Time under 40 minutes. Layer height 0.2 mm Nozzle…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Parts The model consists of multiple parts, each is stored in a separate STL file: Sides: Left-Side.stl and Right-Side.stl Back: Back.stl Bottom: Bottom.stl Front versions Front_Blank.stl - without lettering for you to modify (if you…
Overview My son's IKEA wardrobe broke unexpectedly. One of the clothes rail brackets snapped, sending the rail and clothes tumbling. I took the chance to measure and 3D model the remaining unbroken clip, then 3D print another. Thus the…
KlackEnder Probe Rev2.1 KlackEnder Probe - Simple, fast and cheap! What is this about? Adaptation of the Klicky / Quickdraw Probe for the Ender 3 and comparable Creality printers. The probe is compatible with all printers that use the X…
The PCB Workstation with Nano Probes is the best solution to work with electronic boards equipped with SMD components that are very small and hard to access for many of the most used laboratory test probes. UPDATED: Now you can buy the…
Summary This is a 1:24 scale model of lockers in a kit card style. Versions The kit card is available in a 3MF file for a one-color print. The individual lockers are available as separate files. Print Print with 0.16 layer hight or lower…
AUG 2024 - V0/Printers for Ants: Do not print this!!! I hope to have a V0 compatible mount when finishing my Hex-Zero build. Carto/Beacon sits already very close to the bed, I didn't like how the stock probe mount had the risk of screws…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
…Please be sure to hit like & post a make, I'd love to see your prints! Add a highly accurate M12 LJ12A3-4-Z/AX inductive probe to your SV08! This probe is a NPN NC probe. This means it is normally closed & will provide a “low” signal…
Robert Plant drinking coffee sitting on a bench The file was separated into two parts to facilitate printing. Part 1: Robert Plant Part 2: bank Mouth diameter: 8cm
This model and associated optional configurations are the result of months of trial and error work to improve the chamber heater behaviour of the Qidi Plus 4. The stock chamber thermal probe is located under the frame rail to the…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
For shower stalls that don't have a towel bar. Hang this over the frame and you can keep a bathrobe and a bath towel handy and dry, just outside the door.
I added a Negative Part by right clicking the model and choosing a cylinder. I set the size to 90mm by .5mm and moved it under the wrist where it contact the bed. This forces the slicer to fill that area with the next closest layers or…
Can protect the probe body by triggering contact stylus, probe must be active and in protective mode to react. Won't help if you handwheel the Z at Mach speeds. Recommended Print Settings: Seams-Random Walls-4 Infill-Gyroid ≥35…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
Hope you enjoy! Will be building myself soon!
Compatible with: Extruder : SKU M3301 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: Various Options 3D Printer Model: CR-10 CR-10s…
UPDATE 25/3/2023 thickened bracket as noticed it heat creeps over time. this reduces the amount tap can move but should still trigger. print standing on its end. Uses 4x m3 heatsets 2x m3x10 Attach probe to bracket with included small…
I took the factory hotend mount model and remodeled it to accept the X gantry Voron Clockwork 2 left and right mounts. Since the SV06 has its own probe and uses sensorless homing I removed unneeded geometry for belts, probe mounts etc.…
Halkey-Roberts Valve Adapter that fits Thurso SUP. The pump side of the adapter has an 18 mm I.D. that allows most pump hoses to be inserted with a snug fit. The wall of the pump side where the hose is inserted is thicker than that of…
This is a simple adapter so that the Biqu Microprobe can be mounted on the mounting points made for a CR Touch or a BL Touch. It is essentially an extender, since the microprobe is significantly smaller in height than the usual suspects.…
These strobe disks are for checking/adjusting the speed on your turntable, assuming it doesn't already have this feature. When using the applicable disk, viewed under fluorescent or other 50 or 60hz light (neon or similar) with your…
Dread Pirate Roberts sword sheath from The Princess Bride Printed in PETG and 0.2 layer height. It is convenient to add some brim to all the pieces Supports only needed for the sheath_up. Sheath interior pieces are numbered in the upper…
We have been playing The Invincible recently and we loooooved the sci-fi style sooo… we got inspired for such a design! We hope you enjoy the design too! Print information: Recommended regular/base settings (15% infill, 5 top layers, 4…
Es sind zwei Ausführungen von Garderobenhaken. Gedruckt habe ich es aus schwarzen PLA mit 30% Fühlung.
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
Barbie-like dollhouse furniture: All printed with 0.4 mm nozzle: Wardrobe - fully printable without support. Use 1.75 mm filament as a connector for doors. Table - I suggest to print “loose” version to put legs into countertop easier.…
Remix from: https://www.thingiverse.com/thing:5513241 Added legs for stability when laying down on its back. UPDATE: I've made a pegboard cradle for use with this model. See it at:…
The PCB Workstation Kit V1 with Needle Probes is the ideal tool for hobby or professional work on small or medium sized electronic boards (PCB width from 10 to 156 mm). UPDATED: Now you can buy the much improved 2024 V2 kits at…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Flat” and “Base'' are suitable for printing without support. The “Body” file…
This is a Klicky probe dock modified for compatibility with E34M1 and other Mercury One toolheads.
This model is compatible with the lego system.
Tidy up your electronics bench, and keep your oscilloscope probes handy with this oscilloscope probe organizer. Designed to sit under a modern digital scope, this organizer features drawers for 4 probes. Slots in the door fronts allow the…
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
![M3301 CR-10 / Ender-3 [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/752941/images/5875415_aef71d45-79a9-45ac-914c-33f9cabdee76_1b470434-8aec-41fc-a3f6-a048b3c0addb/ngrevoender3001_2400x2400.webp)
