Wyniki wyszukiwania: s12

Sortowanie

Liczymy pasujące modele…

P
PrintablesCap'n Corny

PTFE Holder for Filament Guide by @ByPS128

THE ORIGINAL FILAMENT GUIDE IS REQUIRED TO HOLD THIS IN PLACE!! A quick model I put together since I was starting to get annoyed with the extra tubes coming out of my S4 just lying around and getting tangled together. There's a version…

Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
14
Polubienia
4
Ocena
0
P
Printablesjjch

spike bar end RS125

Bike parts: I made it for an RS125, but it works for almost any bike with M5 bar ends. I 3D-printed it for prototyping, but the final version was made in metal. Be very careful if you ride with the plastic version on the road. I’m not a…

Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesKit

Beelink Mini S12 - 10 inch rack mount

The Beelink Mini S12 perfectly fits in a server rack as a 1U device. I have designed a simple rack mount for 10" racks. Use the supplied screws that come with the Beelink mini PC (for the VESA adapter) to secure it to the baseplate, then…

Pobrania
691
Polubienia
70
Ocena
5
P
PrintablesVaarlion

Rack ear for Zyxel XGS1210-12 switch

This model barely fit in the mk3 bed size, and may be a bit flexible but having support under helped You will need 6 8mm m3 screw and 6 m3 square nuts to bolt the part together. The switch is meant to slide from the front, and be locked…

Pobrania
417
Polubienia
24
Ocena
5
P
PrintablesTobi Höher

Makita LS1219 / LS1219L / LS1019 / LS1019L - Vacuum adapter (bypass)

This is my version of a vacuum adapter for Makita chop saws, to be able to connect the vacuum to the fixed part and not to the moving arm as with the original adapter. You also need a cover for the upper part, but this is already…

Pobrania
358
Polubienia
31
Ocena
0
P
PrintablesNoxVenit

Beelink Mini S12 Pro 19" 1U Rack Mount

Remix of a remix. Fits the Beelink Mini S12 Pro. Have not tested with the non-pro model, but I imagine it works all the same. Friction fit so it is tight and doesn't move around once it's in place. Can use just the blank bracket mount to…

Pobrania
306
Polubienia
27
Ocena
5
P
Printablesecubed

Makita LS1219L Miter Saw 2 1/2" Dust Adapter

2 1/2" OD dust adapter for the side dust port of the Makita LS1219L 12" Miter Saw.

Pobrania
280
Polubienia
34
Ocena
5
P

Xiaomi Vacuum-Mop Robot - Série 2S, P, Pro, S20, S12, S10EU

Side Brushes for the following robot vacuum models: Xiaomi Vacuum-Mop Robot - Series 2S, P, Pro, S20, S12, S10EU Part_1 PLA 0.2mm support: tree print in the position shown in the image Part_2 TPU 0.3mm support: tree print in the position…

Pobrania
257
Polubienia
123
Ocena
0
P
PrintablesNanodesigner

Blocchi cuscinetti lineari - Linear bearings block SCS6UU - SCS8UU - SCS10UU - SCS12UU - SCS16UU - SCS20UU

Blocchi cuscinetti lineari SCS6UU - SCS8UU - SCS10UU - SCS12UU - SCS16UU - SCS20UU. Le misure dei modelli SCS_UU sono quelle più di uso comune, e si rferiscono alle misure dei modelli riportati in verde nel file SCS_UU_datasheet.pdf Le…

Pobrania
248
Polubienia
14
Ocena
0
P
PrintablesFrank M

Throat Insert Plate for Ridgid Saw MS1290LZA \ MS1290LZ1

I searched far and wide for a replacement throat plate or a 3D model of a throat plate for Ridgid Saw MS1290LZA, to no avail. The model was discontinued. The old plates became brittle and broke apart. This design is much stronger and more…

Pobrania
246
Polubienia
11
Ocena
5
P
PrintablesMichael Zimbaro

Makita LS1219L Miter Saw 2 1/2" Dust Adapter

I created this remix so that I could connect both dust ports together into a single adapter which could connect to a 2" shop vac. Remove your old part, unscrew the hose from the blade guard and screw it into the new part. Also, insert the…

Pobrania
227
Polubienia
25
Ocena
5
P
PrintablesVoltmaster

Servoframe for KST X10 DS125 or similar Servos

These Servo-frames are perfect for the KST X10 or similar Servos in same size. Best filament-choice is PET. 100% infill, print time for 2 frames is about 52 minutes.

Pobrania
189
Polubienia
3
Ocena
0
P
PrintablesPrune

makita-ls1219-ls1219l-ls1019-ls1019l-rear-vacuum-adapter

Overview The default Makita LS1219 comes with a (stupid ?) vacuum hose adapter, which plugs into the top handle, which is a moving part. (This is not the case on the smaller LS1019 ). The vacuum adapter for your shopvac is also bulky.…

Pobrania
172
Polubienia
10
Ocena
5
P
PrintablesBert

BMW GS1250 Adverture

Download ? Please Like Thx BMW GS1250 Adverture

Pobrania
160
Polubienia
14
Ocena
5
P
PrintablesAmazing Wood

Makita LS1219 / LS1219L / LS1019 / LS1019L - Vacuum adapter with CAMLOCK

Original Makita bypass is for easier connection to the vaccum hose of the LS1219 / LS1219L / LS1019 / LS 1019L by @Tobi Höher. https://www.printables.com/de/model/559368-makita-ls1219-ls1219l-ls1019-ls1019l-vacuum-adap This model is a…

Pobrania
151
Polubienia
24
Ocena
5
P
PrintablesAlex

Fractal Design Ridge x Noctua NH-LS12s Power Socket adapter (better clearance for cooler)

Instead of spacer with longer screws - adapter that's not that much longer, but well optimized for better clearance.

Pobrania
151
Polubienia
8
Ocena
0
P
PrintablesFeday

65mm wheel landing gear for Eclipson PITTS S12

A landing gear for the Eclipson PITTS S12 that will take larger 65mm wheels. Useful for when you need to lands on grass. You need to mirror all parts in your slicer for the other side! Requires a 200mmx3mm rod for strength, just like the…

Pobrania
140
Polubienia
7
Ocena
0

Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port

Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port. Prints with no supports needed. If you print with 0.3 layer height and 0.6 wall width, you can get a solid part with 2 outer walls right up…

Pobrania
133
Polubienia
15
Ocena
0
P
PrintablesKunzite

Tineco A10/S12 Brush Wall mount

A simple and strong wall holder for the spare Tineco brush that holds the brush at one angle. The model should be printed standing up (like the picture) with the help of a brim, no support is needed :) Print settings (suggestions) Print…

Pobrania
126
Polubienia
12
Ocena
5
P
PrintablesGlen Bayley

Rack Mount for Beelink S12 Pro

Why another rack mount for the Beelink? TLDR: The others were just too flimsy for me. Modeling my own also gets me the features I want. The Beelink mini PC is ~40mm tall, which leaves only 4mm spare inside the thin 1U rack slot we all…

Pobrania
122
Polubienia
13
Ocena
0
P
PrintablesPicklz

Makita Miter Saw 2.5" Dust Port Relocation - LS1219 / LS1219L / LS1019L

I needed a better solution for the dust colleciton on my Makita miter saw. First and foremost I wanted to move the connection point from the top, sliding portion of the saw down to the bottom and I also needed the ability to connect a…

Pobrania
122
Polubienia
6
Ocena
5
P
PrintablesLegendaryCheez

Makita LS1212 / LS1013 Miter Saw Insert

Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily modifiable if you want to try 0 clearance insert. To connect the two pieces, I had played with the idea of a puzzlepiece-like…

Pobrania
114
Polubienia
16
Ocena
0
P
PrintablesEmer genz

OsVac Adapter for Makita Mitersaw (LS1219L, DLS211)

Ich habe den Adapter für meine Makita DLS211 erstellt.

Pobrania
111
Polubienia
8
Ocena
5
P
PrintablesDavid

Soporte para mikrotik CRS125-24G-1S-2HND - RACK 19"

Soporte para ROUTER MIKROTIK CRS125-24G-1S-2HND, para montar en rack de 19"

Pobrania
109
Polubienia
4
Ocena
0
P
PrintablesWeaponsmith

Beelink Mini S12 Pro Mini PC upright stand

This lets the side vents work better to suck air from the bottom and vent out the top and back. Prints without supports.

Pobrania
107
Polubienia
15
Ocena
5
P
Printablesolekhal

Milwaukee 125mm M18 BOS125 orbital sander pad alignment tool

The original model by Lookahead is simple and effective. Unforunately it doesn't work with the Milwaukee M18 BOS125 orbital sander. The pins are a pinch to wide, and they are space to far apart. On the Milwaukee the center distance is 66…

Pobrania
106
Polubienia
24
Ocena
0

Tineco Pure One S12 Dustbin Lid

I couldn't find one to print and you can only buy the dustbin and lid from Aliexpress. Now you can print your own replacement lid. Use the original seal that came with the dust bin lid.

Pobrania
104
Polubienia
2
Ocena
0
P
PrintablesPixBalance

[PFBS12C5] Multipurpose Cutting Attachment

Cut out any shape in a variety of materials while having full control. The Multipurpose Cutting Tool is attached to the multi tool and replaces the union nut. Recommendation Print in PETG, nut on top. No supports. Everything gets better…

Pobrania
103
Polubienia
16
Ocena
0
P
PrintablesOxmstr

SPDT switch case SS12D00G3

A small case for small SPDT switch SS12D00G3. No supports required, integrated sacrificial layer and built in clip.

Pobrania
100
Polubienia
9
Ocena
0
P
PrintablesClonetrone

Zyxel GS1200-8 10 inch rack mount, with rounded corners

Zyxel GS1200-8 10 inch rack mount, remixed from the excellent model by Chillora. The remix introduces rounded corners and a centered slot to match the “rounded” rack look. Recommended to print in PETG for high thermal environments with…

Pobrania
99
Polubienia
5
Ocena
5
P
PrintablesGabe Yoder

Beelink Mini S12 case extender

I got one of these Beelink mini pcs to use for a plex server. It comes with an empty internal bay for a 2.5 inch hard drive, but there is extremely little clearance around it. The hard drive I wanted to add was apparently more rubenesque…

Pobrania
98
Polubienia
9
Ocena
4,5
P
PrintablesPavel Dvořák
Pobrania
97
Polubienia
7
Ocena
5
P
PrintablesCannedBass

Gridfinity ES126 Holder

Sequre ES126 Electric Screwdriver holder for Zack Freedman's Gridfinity organization system. No magnet holes because I don't use them.

Pobrania
91
Polubienia
22
Ocena
5

ES121 Electric Screwdriver Case

This is a case to hold the awesome ES121 electric screwdriver: https://www.banggood.com/Upgraded-MINI-ES121-Electric-Screwdriver-Smart-Repairtools-Built-in-STM32-Chip-OLED-with-Screwbits-p-1258406.html?p=2@3021069489201207MV The tool and…

Pobrania
88
Polubienia
15
Ocena
5
P
PrintablesHippie13

Makita LS1219 Zero Clearance Insert

I tried my hand at designing a zero clearance insert for my miter saw. It took a lot of test prints and refining the model but eventually I got there. This model can print on a single plate and then slides together using the dovetails. I…

Pobrania
85
Polubienia
7
Ocena
0
P
Printablescdh

Gridfinity ES126 + ifixit screwdriver and bits holder

Screwdriver and bits holder for Zack Freedman's Gridfinity organization system. Holds: Sequre ES126 Electric Screwdriver iFixit Screwdriver Standard 4mm bits that work with both

Pobrania
85
Polubienia
22
Ocena
5
P
Printablesjeroenrnl

Mikrotik CRS125-24G-1S-2HnD Rackmount

This is a remix from David's version that removes the letters, slightly speeds up printing and removes the need for supports. I tapped the holes in the side of the front to M3 and used short M3 bolts to screw the rachmounts to the switch.

Pobrania
83
Polubienia
7
Ocena
0
P
Printablesdtrayers

Makita LS1219 Dust Port for Shop Vac

This is a replacement dust port for the Makita LS1219 Miter Saw (12"). The stock adapter is sized for a 1.5" (40mm) hose. And the way the stock port is configured, you cannot place the saw up against a wall without pinching the hose. This…

Pobrania
82
Polubienia
5
Ocena
0
P
Printablesmarbledradial

Ryobi RTS12 replacement throat plate

Replica throat plate for the Ryobi RTS12 table saw. Split into two parts for ease of printing, simply glue, epoxy, or otherwise fuse the two halves together. Use the original knob and screw for locking. For a wider opening, example for…

Pobrania
80
Polubienia
5
Ocena
0
P
Printablesopinion_panda

10 inch Beelink S12 Pro Mount (R) with JetKVM - Beelink 1U Mount

A 10 inch rack mount for a Beelink mini pc and a jet KVM. I've oriented the 3MF and supported it where necessary to allow for IO.

Pobrania
78
Polubienia
5
Ocena
1
P

[UPDATED] Camera Hood for Panasonic Lumix micro 4/3 default lens H-FS12032

I recomend you to print version V2 it has fixed problems. I have wanted lens hood for my Panasonic Lumix GX880 with default lens H-FS12032. It is really hard to get them and they are not cheap, so I designed it and 3D printed it. If you…

Pobrania
78
Polubienia
8
Ocena
0
P

Makita LS1220 zero clearance kerf insert

I made a zero clearance insert for the Mikita LS1220 miter saw.

Pobrania
78
Polubienia
10
Ocena
0
P
PrintablesTom

Box (Remix) für SQ-ES126 Screwdriver

Die Box ist nicht von mir! Ich habe sie nur in der Größe verändert, und ein paar kleine Änderung vorgenommen. Damit ich meinen elektrischen Schraubendreher verstauen Kann!

Pobrania
73
Polubienia
15
Ocena
0
P
PrintablesNial Tilson

Makita LS1219L DC/DC Cover - extended length

After getting the enlarged DC/DC Converter shared in pemphillip's Addendum V2, I saw that the larger footprint of that board did not fit in the existing cover. To make it fit and not have to cram everything into the opening haphazardly, I…

Pobrania
69
Polubienia
9
Ocena
0
P
PrintablesDanAndersen

Zyxel GS1200-8 10 inch Rack Slimline

There are already a few 10 inch rack mounts for Zyxel GS1200-8 (and GS1200-5), but this one has some unique features: As slim as possible, to squeeze it into small spots. The holes fit between the 0.625 inch and 0.500 inch sections…

Pobrania
69
Polubienia
5
Ocena
0
P
PrintablesImOkayAtMATLAB

Ryobi RTS12 Table Saw Stand Feet

Part Purpose I purchased a Ryobi RTS12 table saw, which includes a stand on which to place the saw. There are four feet to this stand, yet I noticed that one set of feet were not flush to the ground, which I found concerning with the…

Pobrania
69
Polubienia
5
Ocena
0

Waterpump wheel Aprilia RS125

I made a waterpump for my Aprilia RS125 Racebike. It has a groundplate for better flow and more stability. I printed it out of very well dried nylon. (Easynylon from Overture) printed slowly with a ,6 nozzle. I tested it on my racebike…

Pobrania
67
Polubienia
6
Ocena
0
P
Printablespiledge

Rackmount 1U Zyxel XGS1250-12

1U Rackmount for Zyxel XGS1250-12. Split design for small printers. BOM: 14x M2 heat-inserts 8x M2x25 (or longer) SHCS Screws 2x M2x16 (or longer) SHCS Screws 4x M2x10 (or M2x12) SHCS Screws You'll find a full assembly which shows how to…

Pobrania
66
Polubienia
2
Ocena
0
P
Printablesandimoto

IronBox - ES120 electrical screwdriver box with 4mm hex nut holder

This is a box for my ES120 electrical screwdriver, a normal screwdriver and many 4mm hex bits. It also contains 2 chambers to store some loose screws and other things in it. There are also 2 small lids which fits onto the chambers. When…

Pobrania
66
Polubienia
16
Ocena
5
P
PrintablesAndreas Fink

Gridfinity Holders ISDT Chargers Air 8 Q8 Max Spektrum S1200

Angled / Vertical Holders for LiPo Chargers from ISDT and Spektrum for a Tidy Desk Organization.

Pobrania
64
Polubienia
8
Ocena
0
P
Printablesnicklmade

Makita LS1219L miter saw hose adapter

Adapter to connect a Craftsman shop vac to a Makita miter saw

Pobrania
63
Polubienia
3
Ocena
5
P
Printablesnilrog

Zyxel GS1200-5HPv2 10 inch 1U rack mount

This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 10 inch rack. The mount is 1U high, and the switch mounts flush with the front. The total depth when mounted in the rack is no more than then depth of the…

Pobrania
59
Polubienia
3
Ocena
5
P
PrintablesMajarspeed

ES126 grip and cam button.

This is a ES126 grip and cam lever for pressing the button. Partially remixed from https://www.thingiverse.com/thing:2805221. The grip is molded on a Wera 2mm hex driver and is extra comfy in the hand. I had to recreate all of the files…

Pobrania
59
Polubienia
9
Ocena
0
P
PrintablesDurahl

SQ-ES126 Electric Screwdriver Case

Preparation: The Case reuses the Bar Magnets that come in the Bit Storage Case requiring for them to be retrieved first ( most likely cleaning by removing any glue and case material still sticking to them ). The Cavities account for…

Pobrania
54
Polubienia
13
Ocena
5
P
PrintablesDave Corder

HP DPS1200FB/Common Slot PSU to ATX holder

From Thingiverse: Hi, holder to install an HP server PSU DPS1200 fb into an ATX PSU form factor. Enjoy ! Print Settings Printer brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament brand: amazon Filament…

Pobrania
54
Polubienia
5
Ocena
0
P
Printableswilly

Wobble-X WS12 Solution

I successfully implemented this on my Ender 3. The system is comprised of the top wobble-x bracket, the left and right hangers, the middle wobble-x bracket (biscuit), the bottom bracket, and the z-axis motor mount. I use dual z-axis lead…

Pobrania
54
Polubienia
5
Ocena
0
P
PrintablesTobi Höher

Makita LS1219 / LS1219L / LS1019 / LS1019L - Vacuum adapter

I have designed here a vacuum cleaner connection for my Makita LS 1219L. I hope this adapter is also helpful for you. Dimensions for vacuum cleaner: inner diameter 48.5mm outer diameter 54.5mm if you want to keep me awake, feel free to…

Pobrania
53
Polubienia
8
Ocena
0
P
Printablesdrei-d-w

Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - ShopVac CamLock Adapter - 3DW

The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…

Pobrania
51
Polubienia
6
Ocena
0
P
PrintablesPeteR.

Skadis holder for SQ-ES126

The hole on the bottom leave you access to the USB charging port. Printed with 0.6 nozzle in PLA. Support from build plate needed for the top hook.

Pobrania
50
Polubienia
6
Ocena
4,67
P
Printablesrowdawg22

Sequre ES126 Screwdriver Holder - Multiboard

Sequre ES126 Screwdriver Holder modified for Multiboard

Pobrania
49
Polubienia
11
Ocena
0
P
PrintablesHeinzHeizer

120 mm desk fan based on Arctic S12038-8K with integrated PWM controller

This is the high-performance, high-noise version of my desk fan — designed around the Arctic S12038-8K , an 120 mm industrial fan running at up to 8,000 RPM . Compared to the Noctua-based versions, this thing is in a completely different…

Pobrania
48
Polubienia
15
Ocena
0
P
PrintablesFeday

square anchor nut for eclipson pitts S12 and model R

I always get glue on the nuts that are included with the original eclipson pitts S12, that makes things suck pretty bad when you want to attach the wing to your model. This is a version that will take a M3 square nut, no glue required,…

Pobrania
47
Polubienia
4
Ocena
0
P
PrintablesJulia Auer

brush holder for Tineco PURE ONE S12 - wall mounted with shelf

we recently bought the Tineco cordless vacuum clear and it came with so much additional accessories, that there was not enough space to put all of the onto the included wall mount. so i created the holder to screw it to our workbench…

Pobrania
45
Polubienia
6
Ocena
0
P

Matika LS1013 and LS1212 miter saw kerf boards

I had combined LegendaryCheez's two parts into one to be printed on larger printers (Creality K2). This also fits Makita LS1013 as well. Print solid (infill 100%) for best results.

Pobrania
44
Polubienia
4
Ocena
0
P
Printablesjtuckwitz

SQ-ES126 Electric Screwdriver and Bit Holder for Honeycomb Storage Wall

SQ-ES126 Electric Screwdriver and Bit Holder for Honeycomb Storage Wall. Fits all 24 bits for the driver, and the screwdriver all in one neat solution. Hole is 19mm wide to allow the SQ-ES126 to fit in easily, but still sit snug. Printed…

Pobrania
44
Polubienia
3
Ocena
0
P
Printablesdrei-d-w

Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - upper hose replacement - 3DW

First, unscrew the extraction nozzle from the hose. Then, screw the 3D-printed adapter onto the hose. Remove the counterpart from the machine (by loosening the screw). Finally, insert the printed adapter together with the suction hose…

Pobrania
42
Polubienia
3
Ocena
5
P
PrintablesDaniel Westhof

Canon NB-6LH BatteryDummy for S90, S95, S120.

Sadly the opening in the battery cover is not big enough that a USB plug can fit. So you have to source some small barrel plug socket and jack. I used a 4mm Socket that I had laying around. The .stl file I provide here has just a 4mm hole…

Pobrania
41
Polubienia
4
Ocena
0
P
Printablesj_s_h

Ascend FS10 / FS12 Kayak Deck Plate Storage

Replacement weather-proof deck plate storage container for FS10 and FS12 kayaks. (May fit others; see dimensions on drawing.) The tapered edge prevents the need for supports. I used a modifier to print the top ring at higher infill than…

Pobrania
41
Polubienia
9
Ocena
0
P
PrintablesThenated0g

KST DS125MG Server Holder

KST DS125MG Server Holder

Pobrania
39
Polubienia
2
Ocena
0
P
PrintablesHoopy

Skadis holder for ZyXEL GS1200-8 switch

A holder to mount a ZyXEL switch onto a Skadis board. To mount the holder to the peg board, use these T-nuts .

Pobrania
39
Polubienia
3
Ocena
0

Aprilia RS125 Keychain

So this is a side view of my Aprilia RS125 racebike. The backwheel spokes are in the backwards direction, because my racebike has a honda wheel in backwards :)

Pobrania
38
Polubienia
0
Ocena
0
P
PrintablesDROUGA

Miniware ES121 Screwdriver

Making a few mods for my ES121 so i needed a 3D model to work from. Buy here: https://bit.ly/378e7dX Category: Tools

Pobrania
37
Polubienia
3
Ocena
0
P
Printablesmkgin

20mm adaptor for Lidl Parkside Rotary Drill PMGS12 C3

Intended to match the size of the proxxon micromot mount ( 20mm) so that the Lidl drill can be used in a drill press holder made for a proxxon. A quick fix as my proxxon has a chuck and I haven't ordered collets yet. The parkside has…

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesZRex

ES121 Electric screwdriver stand

A stand and holder for 1x ES121 driver and 15 bits Print instructions Category: Tool Holders & Boxes Summary A stand and holder for 1x ES121 driver and 15 bits

Pobrania
36
Polubienia
2
Ocena
0
P
Printables3DFreeman

SPAS12 - Wiimote Shotgun

I am having some issues with my printers at the moment but I don't want to delay the release of this, my latest overly complicated wiimote & nunchuck holder. (It's not really complicated, compared to my Socom 16, it's a breeze). Once I…

Pobrania
35
Polubienia
8
Ocena
0
P
PrintablesStarwhooper

Zyxel GS1200-5HP v2 19inch Rack Bracket

Mount Zyxel GS1200-5HP v2 in 19inch Rack

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesEd Gauthier

Anchor Wizard stabilizer for Bonafide SS127 perch pad mounting

I wanted something to stabilize my anchor wizard which I installed on a mighty mount recessed into one of the perch pads. This straddles the might mount and perch pad, making contact with both, as well as the kayak on either side of the…

Pobrania
35
Polubienia
5
Ocena
0
P
Printablesdvittorio

ESRack - Module - Zyxel Switch GS1200-8

I really liked the original ESRack system design created by @EvilProphet . I created a module for Zyxel Switch GS1200-8 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…

Pobrania
33
Polubienia
6
Ocena
0
P
Printablesl8cloud

Zyxel GS1200-8 10inch 1U Rackmount

A generic 10 inch 1U Rackmount for the Zyxel GS1200-8 i bought for my Lab Rax. Locks the switch in place without requiring screws, allowing it to be mounted in virtually any orientation. Upside-down, hanging in a rack or standard vertical…

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesRubenSeiffert

Oiltank-Cover Aprilia AF1 Futura/ Sport Pro (RS125?)

Diesen Öltankdeckel habe ich entworfen, da der originale bei mir nach der Zeit etwas zu locker sitzt und immer abfällt. Es ist eine simple Konstruktion und sitzt etwas enger als der originale, sodass er nicht so leicht verloren geht. Der…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesBaldSundae

ESRack - Module - Beelink S12

Fits ESRack mounts and other accessories used Elegoo PLA

Pobrania
31
Polubienia
4
Ocena
0
P
PrintablesRubenSeiffert

Forkclamp Aprilia RS125, AF1 125 Futura/SportPro

Passend für Aprilia AF1 Futura/SportPro sowie Aprilia RS125 Federgabeln. Der Schutz ist Konstruiert um die Federgabel für den Service in den Schraubstock zu spannen ohne sie zu verformen oder zu beschädigen. Es passt perfekt auf die Gabel…

Pobrania
31
Polubienia
5
Ocena
0
P
Printableskl4appdrachen

HSW ES121 holder (16mm ⌀)

Holder for an ES121 or somesthing with a diamter of 16mm. It is possible that you need a brim. I added the .step file. Feel free to remix!

Pobrania
30
Polubienia
3
Ocena
4,5
P
Printablesslushy

Es121V 800φ4 / hios bit to hex bit adapter

800φ4 shaft prone to snapping off if you're not careful but still strong enough to use, might want to strengthen it with a paper clip melted into the plastic (i haven't tried this yet). Print with the hex side on the printer bed (think…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesLuberry

XS12 Connector Neutrik Style Mounts

These are good for either upgrading a non-detatchable cable controller, or flush mounting the data port on the detachable cable controllers. Designed to be used with these heat set inserts

Pobrania
29
Polubienia
3
Ocena
0
P
Printablesywabiko

AC Infinity HS1238A Duct Hose Mount (4")

This is a mount to attach AC Infinity 120x38mm fan on a standard 4" duct hose (and for venting to the outside through a window). Tested with followings. AC Infinity Fan AXIAL HS1238A AC Infinity 4" duct hose. AC Infinity Fan Speed…

Pobrania
29
Polubienia
9
Ocena
0
P
PrintablesFatsoTommy

Logitech S120 Improved Volume Knob

Just add it on top of the other, no screws or glue needed. I printed it on Polylite PETG.

Pobrania
28
Polubienia
2
Ocena
5

Parkside PABS12B3 Multiboard holder

A Multiboard holder for Parkside PABS12B3

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesK3NPrusa

Sim Rig - Pedal face plate - Najam Simtec S120

Sim Rig - Pedal face plate - Najam Simtec S120 If you're like me and racing with socks. This pedal face plates give you the all the grip you need, some might call them the "sock eater" ;) Features: Nice grip on your pedals. Mounts to all…

Pobrania
25
Polubienia
4
Ocena
0

Linear motion ball slide SCS12 for DIY

All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…

Pobrania
24
Polubienia
8
Ocena
0
P
Printablesmotocoder

SQ-ES126 and Wiha Go Box MicroBits Stand

SQ-ES126 and Wiha Go Box MicroBits Stand A stand for a Sequre ES126 electric screwdriver and the Wiha Go Box MicroBits Set. Description I have one of the ES126 small electric screwdrivers from Sequre. This model has more torque than the…

Pobrania
24
Polubienia
6
Ocena
0
P
Printablespyrho // 25.wf

Sequre ES126 Gridfinity (refined) module

A simple 1x2 module to hold your ES126 upright along with all its bits. Credits Gridfinity by Zack Freedman Grizzie17 's outstanding Gridfinity Refined gridfinity base Le0Michine 's great fusion360 gridfinity generator

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesSophie

Siglent SDS1104X-E SDS1204X-E SDS1202X-E VESA adapter

If you like this model and use it please upload a like, it really helps others find it! I hated having my scope on my desk and the cables getting in my way, especially when not in use, and I already had a “portable” touch screen mounted…

Pobrania
23
Polubienia
7
Ocena
5
P
PrintablesJustPrinting

Zyxel XGS1210-12 19inch Rack mount only glue

Thanks to @Vaarlion_340250 for the Original Model.

Pobrania
23
Polubienia
1
Ocena
0
P
PrintablesKeen

Dell 3.5" HDD screw Pro Slim Plus QBS1250

If you order a Dell PRO Slim plus with an optical drive, it comes with a drive cage to mount a 3.5" hdd. But no screws. The screws on the website appear to be $4AUD each Here are 4 solutions that can use existing hdd screws you have lying…

Pobrania
23
Polubienia
4
Ocena
0
P
PrintablesBrandon Beaumia

Ridgid MS1250 Miter Saw Zero Clearance Insert Throat Plate

Replaces the throat plate of a Ridgid MS1250 miter saw. Add a long rectangular modifier to increase infill to 100% in the middle 15mm where the blade goes through. Install and make a slow cut. May have to take it out and sand a little…

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesRastio

Adapter for Vacuum Cleaner hose and Gude Grinder EXS125.1

The adapter for connecting the Gude EXS125.1 sander to a vacuum will elevate your eccentric sander to a whole new level. It fits onto the hose designed for a Kärcher with a diameter of 35mm. Printed with support.

Pobrania
23
Polubienia
0
Ocena
0
P
Printablesmorf

Mount for soldering station TS12-X

Mount for soldering station TS12-X. I suggest to print it using TPU or other flex-based material.

Pobrania
22
Polubienia
6
Ocena
5
P
Printablesnobody at all

Ruggedized Box for Sequre ES126

Version of the ruggedized case for ES15 (insert only, reusing the rest of the original version) - but resized for the Sequre ES126, including an extra compartment for a bit magnetizer. Plenty of clearance is included for a lever to…

Pobrania
21
Polubienia
1
Ocena
5
P
Printablesgminnick

Solder Fume Extractor using Axial S1238 Fan

This is a Solder Fume Extractor using the Axial S1238 Fan. I tried to design this to be somewhat modular by creating different back and front parts for adding attachments, such as creating a back that would fit a round hose to extend out…

Pobrania
21
Polubienia
2
Ocena
0