308 modeli
This is only the clamping part of my One-Hand Clamp Mod which allows the use of Bessey EZM and Wolfcraft Pro M directly on your perforated grid plate Workbench. This version works without an endstop and therefor doesn't need any Screws.…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Webcam Arm for Logitech C920/C922 (should work with any cam with standard camera screw hole, hooks into the Prusa aluminium frame, no screws needed. Added camera clips and a short ¼" screw and washers, you only need a cam and 35g of PLA.…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Screwless Cover for 100×100 mm Flush-Mount Junction Boxes This blank cover simply pushes into the box. Each side has a flexible tab with a snap nose that presses against the inner wall of the box and holds the cover in place. Handy when…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
This is a Screwless, parametric, sealed, storage box. The Alround Box MINI: https://www.printables.com/de/model/851837-rugged-storage-box-mini-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed…
I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
A wall mount that uses large size velcro command strips instead of of screws. Based on the math I have done, only half a strip on each side is necessary for a standard record, but I recommend using one full strip just in case. This also…
Check out the video tutorial:
For bigger usecases, use this: https://www.printables.com/de/model/819715-rugged-storage-box-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed anymore! If the filament falls out of the hinges, glue…
It´s a prototype, but everything works as it shoud. Have fun with it! Print instructions Print the Boat verticaly in 0,15mm Vase Mode. Print the shaft standing up, chamfer downside with brim.
*Note The first file uploaded was missing one set of bearing holders, so the corrected file was re-uploaded. In consideration of cases where M3 cap bolts are difficult to obtain, we have prepared a derivative version that does not require…
This remix of the original Silakka54 case has the following differences: case bottom is now solid case top has been integrated into the case bottom case sides walls has been reduced by 50% case walls are now shorter and matches the height…
Ever since I introduced the original Noctua Fan mount for the Gamecube back in 2020, I wanted to revisit it to see if it could be improved upon. One thing I never liked was the ugly external fan screws that mount the Noctua fan to the…
This is a remix of the great Raspberry Pi Case Top of Malolo . We've had a good cooperation over the last few days and have worked on the design and new ideas to make the case even better. So the idea to integrate a fan without the ugly…
Just a slim screwless case for the Raspberry Pi Zero 2 W
Not my models all the credit goes to @ emmett
What is this? This is a simple multi-part design to hold a power adapter of various sizes under the desk. This design is meant to use with adhesive tape, though you could easily remix to add screw holes if you'd rather that. I use these…
I love to hang my vinyl on the wall, but don't really like making screw holes. So i made this wall hanger for vinyl records that doesn't need any screws. All you need is a couple of 3M Command strips (Size Medium). They are sold here in…
I have made this box as a toolbox for the Bambu Lab stuff. I have deleted all the chambers. It is an empty box with two sides to put in something. There is also no label or branding. Do whatever you want with it. Remixes are welcome.…
2025 improved version of this model is here: https://www.printables.com/model/1242691-raspberry-pi-zero-zero-2-case-snapfit-screwless-in Raspberry Pi Zero and Pi Zero 2 Case Compatible with old & newer Pi Zero , Pi Zero 2 & Pi Zero W…
A parametric version of a decora/leviton style screwless face plate for light switches. Can be configured for 1 to 6 gangs in width. Each cover is made in 2 pieces. A base plate that is screwed into the switches which provides both…
Helps you stack two or more IKEA LACK tables on each other without screws, and with Logo Prusa. Vous permettez de superposer des table Ikea (Lack) sans vises, et avec le logo de Prusa ;).
Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…
Organize your kitchen with ease! This is a practical and sturdy holder designed to mount your kitchen rolls directly onto furniture, shelves, or under cabinets. Whether it's aluminum foil, plastic wrap (cling film), or baking paper ,…
This is the cover part of the Leviton Decora Screwless Wallplate for your US Decora-variety electrical outlets and switches. I have a bunch of these in my house, and couldn't find a snap-on solution to replace just the cover portion, if…
A door handle for all those IKEA doors (that are 16,5mm strong). It just clips on, no need screws. It is 30mm wide. If you want a longer or shorter handle, you can just change the z-dimension in your slicer. I printed mine with PETG
Helps you stack two or more IKEA LACK tables on each other without screws. Print instructions This is a IKEA LACK table mount for stacking two (or more) tables on top of each other, without screws. Feel free to remix this, but please…
Simple cable clip without screwing
Raspberry Pi Pico Case Compatible with the Raspberry Pi Pico Snap fit design - no screws required Quick and easy to print, no supports and minimal size Designed to use minimal filament Screwdriver slot for easy lid lifting/opening Access…
screwless enclosure for one or two HDD/SSD single and double version available
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
The inset was a bit too deep for the command strips I had on hand so I sliced off a mm or two from the back. Works fine, printed with .6 nozzle and 30 layer height.
Just a really slim screwless case for the Raspberry Pi Zero 2 W
I learned CAD just to make this remix. Very sturdy and easy to print, no support needed. I recommend 25% infill. The plate makes the mechanism a bit more rigid than the original so I recommend printing this top piece by Localhorst86 if…
A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…
Kit de mala e tenda para Silakka54 Este kit é compatível exclusivamente com o estojo sem parafusos Slim Silakka54: https://www.printables.com/model/1248872-slim-silakka54-screwless-case Ele fornece um sistema de suporte ajustável para…
I could not find a mount i liked for my printer so i made a universal (web)cam mount for the sovol SV06 Plus. Maybe it will also fit on the SV06?? I'ts a remix from another model and i put in an extra joint to have some left to right…
Simple case for 9-pin D-SUB connectors. No additional fasteners are needed. The housing is symmetrical, so you just need two identical prints to make one housing.
Summary A very simply remix of a remix by N8finch of a Jenga case that eliminates the need for M3 hardware.
The table that the Creality K1C is on is out of space, littered with tools like plate scraper, snipper, long nose pliers, etc. I decided to do up a hanger to hold these tools. As I am using the Creality K1/K1C Hinged Lid Riser , there are…
No screws, no supports, 608 ball bearing filament guide designed to fit in the Filboyt filament guide mount. Combine with thing:4683505 (lower) for a complete the set of no screws, no supports, upper & lower filament guides. In the…
Below is the original description from Thingiverse. With Multiboard peg added to the back I printed in PLA with supports (tree) using 15% infill Supports needed for Multiboard peg Summary (taken from original model) This is a case for the…
Easy to print! Print with e.g. 7 walls to make it solid. No supports or brim. May use mouse ear if you want. Use manual seam painting and place it on the middle of the standoff, not on the prongs/nubs on the ends.
[GER / DE] Anpassbares Raspberry Pi 3B+ Gehäuse (Schrauben los) Dieses Gehäuse ist für einen Raspberry Pi 3B+ gedacht. Es sollte auch direkt schließen und brauch keine Schrauben. Er hat vorbereitungen für die Aufnahme eines 40x40x10…
It's a little bigger and blank, and the side is completely covered by the fascia. Sorry I don't have any real pictures of it, but you can get an idea of what it looks like from the original.
Custom, screwless wall plates. I needed a 3-gang wall plate that had a rocker switch in the middle and toggle switches on the outside. I initially considered using WALLY - Wall Plate Customizer , but I wanted the screwless look, so I made…
I needed a power strip hook and I did not wanted to drill the desk, then I designed on catia. Desk thickness is 30 mm. I used petg and my profile is attached also, I tried so much, I advise. Edit: Anyone need pls send me mail, I can send…
Let me tell you a story! A few weeks ago I became obsessed with this 3D printer “enclosure” I saw on the Prusa 3D Printing facebook group. I just had to built it, following the posters design almost identically with a few little of my own…
Assembly guides are following soon! But it is as easy as it looks, just push raw filament in every hole where a screw would otherwise be in! Sizes If you need a special size of this box and don't want to use Fusion 360, just write a…
The Orange Pi PC isn't so popular, so there are a few options for snap-fit or screwless cases. With this, I made one myself. A 4010 fan can be installed inside the case through snap-fit as well. Printing Suggestions: Print the bottom part…
Caramelo Designs' "FIDGET LIGHTER!!!" but without the annoying screws.
Remix removing the GPIO slots of the original design by pedrolamas Original File: https://www.printables.com/model/184688-raspberry-pi-zero-2-w-screwless-slimest-case
I ran out of fan screws and noticed that the PLA+ filament that I used far strong enough that screws aren't needed. I made a project using 8 fans. after quickly running out of screws I made these screwless connectors. They are a very…
Free 3.5" HDD protection enclosure - screwless! Simple, tool-less, screw-less enclosure to protect your old HDD. I had fun designing this protection frame, as well enclosure, to be easy to print, easy to assemble and practical. It even…
Raspberry Pi Zero and Pi Zero 2 Case - Version 2 This is an improved version of the case that I designed ten years ago. This version has improved HDMI connector slot, permitting more types of HDMI connectors to be compatible with the…
To place it just insert it like a normal caddy would do, to take it out, as it dont have a latch to keep it in place as a normal metal caddy, you have to insert the key and twist it, then pull. You can slide a target that shows info of…
ATTENTION! I RIPPED OFF MY SDCARD HOLDER WITH THE CURRENT DESIGN. BE CAREFULL! I will update it ASAP. I designed this to use with my OpenIPC FVP ground station but the case is generic and the step files allow you to modify it to your…
i couldn't find any hooks for vertical acoustic panels, so i created my own. It’s screwless, put it in and twist not much to say, i printed with base plate on bed with a little support for the hook
Case for Heltec V4 Compact, screwless enclosure for the Heltec V4 LoRa board. The lid is held in place by press-fit (friction), no screws, no threaded inserts, no additional hardware required. Compatibility Heltec WiFi LoRa 32 V4 (not…
a standard skateboard bearing is required. (Bearing size 608)
Instructions For each samla box, print: 2x stand leg 2x stand leg mirrored 2x structures For a 4 spools air-tight box you will also need from other sources: Quantity Item Comment 20 Printed washers 6 M8 washers Can be replaced with 12x…
I remixed my screwless filament feeder to be completely toolless now.
Description: This is a custom-designed enclosure for the SW3518 module , available in two wall thickness options : 2mm for added durability and 1.6mm for faster printing and lighter applications. Key Features: Screwless, Sealed Design :…
Design inspired from: https://www.thingiverse.com/thing:3267474 https://www.thingiverse.com/thing:4194407 This toolholder will directly attach around the lack leg. It is tight enought to stay in place (beware of scratches if you do not…
Caramelo Designs' "FIDGET LIGHTER!!!" but without the annoying screws and this version does not require magnets.
Screwless Filament Feeder - 1.75 I found filament feeders for dry boxes, but didn't like how they had to be screwed on, which just added more holes into the airtight container. I came up with this design, which just requires one 5/16"…
imported from thingiverse. remix: https://www.thingiverse.com/thing:4515152 Enclosure for a NodeMCU v3 board with space for a connector to a strip of addressable LEDs. Powered via an external 5V USB power supply. Suitable for powering LED…
2mm thick grid. No print support required. Makes use of large Honeycomb, so it's not fingerproof. (PLA you might need to detach from bed sliding a sheet of paper) SCAD file should work with any fan size, assuming holes are 7mm away from…
This clamp is designed to hold on to round objects like pipes or rods. The clamp is incredibly grippy despite the fact that it is pressed together without screws. You can combine the clamp with other objects in your slicer to create GoPro…
There are a lot of "folding knife" style key holders, key bars or key bones. Most, if not all of them, require screws with the correct length. Screws that needs to be re-tightened now and then, to give the right friction or just to keep…
This small vice is inspired by the screwless vice created by Naomi Wu. It is larger than her original design and includes a wider variety of clamping plates. Although it's designed for use on-the-road, there are two holes for mounting the…
A utility knife. I focused on ergonomics for the handle and ease of blade replacement to create a highly practical and user-friendly design. this version is improved from my other design: Utility Knife by steve5092 | Download free STL…
ORIGINAL MAKE: JanWillem Drenten grabcad.com/library/raspberry-pi-4-case-8 I needed a case for my raspberry running klipper and I had this 50mm fan from the PSU left. I searched a lot but did only find cases where the fan is mounted…
Honeycomb Raspberry Pi Zero 2 W Case You may need to scale the pins based on your printer and print settings.Works for the original Pi Zero too, but has a larger heat sink cutout for the Zero 2. One version of the pin goes in flush, the…
I had an extra small heatsink so I wanted a second cutout. I only changed the “Top”, so go to the original model to get the bottom half!
Screwless clip on Drumstickholder 45° on d=19mm can additionally fixed with rubber bands (Support included), but it is noch necessary if just printed Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter…
I wanted a grommet for my dry box to allow the filament to get from the inside to the outside, using but without having to drill little holes for screws etc. So came up with this thing. The only hole required is a 20mm hole, which is…
Compatible for (at least) these IBM servers: X3550 M4 X3630 M4 X3650 M4 X3850 X5 X3950 X5 Should fit any standard 2.5" HDD or SSD. Screwless model only, compatible drives will slot right into place and grip is very good provided your…
Looking for a stand to display your Emmett Screwless Heart Gear model? Look no further than this 3D printable stand, specifically designed to hold the heart-shaped gear with ease. Made to perfectly fit the Screwless Heart Gear by Emmett,…
Remix of the record wall holder, just adds the words "NOW SPINNING" to the front
A simple box for the Orange Pi One. It has screw holes, but you do not need the use them, because you can just click it together Notes: Set "Support Margin" to 0 to avoid that the support ruins the smooth surface near the ports, or don't…
This holder is made to attach 30x30x10mm cooling fans to a Raspberry Pi. [PT] Apoio para coolers de 30x30x10mm para Raspberry Pi Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: No Supports: No Resolution: Any Infill: 18%…
Added SW part file for easy changes if it should not fit.
Supports Recommended (Organic or Grid) 0.1-0.15 Layer Height
Fits 34mm MTB handlebars. Adapters for 25.4mm and 31.8mm are included. I recommend printing the adapters from TPU95. Recommended material for the rest: ASA GF or ASA CF. Use two zip ties to fix the handlebar and Olight (with its original…
CYD (Cheap-Yellow-Display) ESP32 Case – No Screw Custom-designed case for the CYD (Cheap Yellow Display) ESP32-2432S028R, designed to protect and neatly house the board in a simple and clean way. The case features a snap-fit assembly,…
Tested in 0.4 with PETG. Hook portion stolen shamelessly from CJ I. CJ I. | Printables.com Honeycomb Tool Boxes for Prusa Mini(+) by CJ I. | Download free STL model | Printables.com
This is a box-generator that generates rounded-corners boxes, requiring no supports to print and no screws to assembly. You can add feet for a PCB board, and custom holes for displays and buttons. You can customize it following the…
Simple case for the Innomaker USB2CAN CAN-bus to USB adapter. It does not require any additional fasteners
Making the assumption that there will have some amount of weight on it, I've made a very short version of salzig's LACK table stacker model, thickened the walls a bit, resized the leg "receiver" hole a bit and beveled the edge to account…
A lid to prevent foreign objects like cables, fingers, etc. from getting in the fan. Ideal for PC case fans cases, homemade computer cases, electronics cabinets, etc. It uses conical frustums as the pegs to push into the screw holes of…
Power strip table mount for without the need for screws. The direction is inwards for tables that are against the wall.
The mechanism utilizes internal magnet pockets, precise geometric interlocks, and a slide lockup to eliminate the need for external screws or threaded fasteners. Clean assembly geometry engineered with exact tolerances for smooth slider…
The kids wanted to put Legos on the switch plates but I didn't see any available to replace the Eaton 2-Gang PJS262__ Screwless Decoration wall plate... so I create one using Fusion360. This requires a 3d printer that is calibrated pretty…
These caddies haven't been tested in servers of the 14th gen of dell servers nor other brands, if you print one and you find it compatible please share with us.
The extruder clip that was included in FedorSosnin's thing wouldn't fit my stock extruder because the screw for the spring was in the way. This clips onto the edge and doesn't require any screws. Print Settings Printer Brand: Creality…
I wanted my router to be installed on the outer side of my servercabinet, screws are therefore not possible. Therefore I created a very simple but 100% fit wallmount for Synology RT6600ax Router. Entire size is designed to fit exactly one…
Updated models for in-wall and with Wyza's faceplates You probably want one of the updated models instead of this one. The IKEA BILRESA two-button remotes are a very inexpensive way to add a programmable wireless switch to a smart home…
Let me tell you a story! A few weeks ago I became obsessed with this 3D printer “enclosure” I saw on the Prusa 3D Printing facebook group. I just had to built it, following the posters design almost identically with a few little of my own…
![[Screwless] Spool holder for Prusa MINI](https://media.printables.com/media/prints/145176/images/1372044_b3311120-21ed-43c6-acb3-b6fc0a978df6/cg.jpg)
