Wyniki wyszukiwania: spen

Sortowanie

5995 modeli

P
PrintablesMintax

Custom Nespresso Capsule Dispenser

Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…

Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu

Pobrania
11 168
Polubienia
2104
Ocena
4,92
P
PrintablesEnigma

Drink can dispenser

Inspired by similar-looking can dispensers, but built from scratch to actually fit cans I use and hold more cans (accommodates around 11-12 standard-size cans). The parts are split to allow printing on a Prusa Mini, with joints hidden as…

Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu

Pobrania
10 164
Polubienia
4939
Ocena
4,74
P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu

Pobrania
8814
Polubienia
4733
Ocena
4,89
P
PrintablesUpcrid 3D

Ultimate Weekly Pill Organizer & Dispenser Gravity Cascade

Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…

Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu

Pobrania
3437
Polubienia
1335
Ocena
4,57
P
PrintablesFroggy Forge

Suspended aquarium planter

UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…

Wydruk około 7,24 €–8,85 € nettoWstępna wycena jednego wariantu

Pobrania
2154
Polubienia
806
Ocena
5
P
PrintablesmoWerk

Small Trash Bag Dispenser / Holder for 35L rubbish bags / garbage bin liner

Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…

Wydruk około 3,45 €–4,21 € nettoWstępna wycena jednego wariantu

Pobrania
2032
Polubienia
425
Ocena
5

Earth Rated Dog Poop Bags Roll Dispenser - Wall Mounted, No Supports Needed

Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…

Wydruk około 8,50 €–10,39 € nettoWstępna wycena jednego wariantu

Pobrania
1874
Polubienia
588
Ocena
4,93
P
PrintablesNyein Chan Zaw

Functional Mini Mountain Bike Keychain – Print-in-Place with Working Suspension!

Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…

Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu

Pobrania
1658
Polubienia
173
Ocena
4,86
P
Printableseyalshtark

Actually useful Sheep and Goat toilet/tissue paper roll holder and dispenser

UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…

Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1582
Polubienia
482
Ocena
4,8
P
PrintablesWill

Can Dispenser Adjustable XL no support

Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…

Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1366
Polubienia
622
Ocena
5
P
Printablesfrez_knee

Dog Bag Dispenser for Flexi Leash

Update (9/19/22): Uploaded a revised base with a thinner clip after some feedback that it was too wide. Update (7/11/22): I added the STEP file since someone requested it to make changes to the original. I was a big fan of the…

Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1305
Polubienia
214
Ocena
5
P
PrintablesPeter Farell

Nuka Cola Dispensary : Fallout

Nuka Cola Dispensary / Vending Machine. Make it into a piggy bank. Or use it in the dice tower contest. I find this model very satisfying to look at. I think I am a sucker for Nuclear Age style artwork.

Wydruk około 19,01 €–23,23 € nettoWstępna wycena jednego wariantu

Pobrania
1163
Polubienia
347
Ocena
5
P
PrintablesEdgar.A

Infinite tape dispenser

Here is an infinite tape organiser and dispenser with two measure, 55mm and 30mm. All the pieces are 3d printed. I recommande you to not use the printer files it just an exemple to show an idee of time and mass that will use for this…

Wydruk około 12,10 €–14,79 € nettoWstępna wycena jednego wariantu

Pobrania
1102
Polubienia
311
Ocena
4
P
PrintablesPeter H

Ping Pong Ball ~ Table Tennis Ball Rack~ Dispenser

This is a simple, elegant wall mounted rack for storing table tennis balls. The balls are held securely and won't be dislodged by wind if, like ours you have them stored on a verandah, but they are easy to remove and replace one at a…

Wydruk około 7,46 €–9,12 € nettoWstępna wycena jednego wariantu

Pobrania
818
Polubienia
129
Ocena
5
P
Printableselod

Ergonomic Solder Paste or Flux syrynge extrudes dispenser extruder

Ergonomic Solder Paste or Flux syrynge extrudes dispenser extruder Simple but effective and comfortable to use, large surface area touching the plam of your hand Easy to print Print instructions print oriented with flat surface to bed (…

Wydruk około 1,83 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
771
Polubienia
130
Ocena
4,85
P
PrintablesRettex31

Seed dispenser

This model is designed to help with sowing seeds. The top part can be rotated, so that you are able to regulate the number of seeds coming through. 1 … smallest hole, 2 … medium hole, 3 … biggest hole, X … the dispenser is closed. OPEN ……

Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu

Pobrania
759
Polubienia
109
Ocena
4,94
P
PrintablesDrawnToDigital

Dog Bag Dispenser for Flexi Leash Remix

This remix is based on frez_knee/bandslinger's dog bag container with the Flexi hook moved to a position that allows access to the bags from the side of the leash (rather than underneath) “Left” and “Right” versions are based on which…

Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
656
Polubienia
111
Ocena
5
P
Printablesckassoff

Georgia-Pacific paper towel dispenser key

I couldn't find a “key” that had both parts on it, so I sketched this one up

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
595
Polubienia
33
Ocena
5
P
Printablessquinn

Classic Weighted Tape Dispenser

The classic tape dispenser for use with rolls of scotch tape or equivalent, but designed for 3D printing! Thanks to some interesting internal chamfers, this can be simply printed-in-place. In addition, the tape core included here uses a…

Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
581
Polubienia
168
Ocena
4,93
P
PrintablesSoontheman

IKEA Behjälplig Suspension

Printed in PETG with 15% infill and supporters.

Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
488
Polubienia
14
Ocena
5
P
PrintablesWerner-3D

Shooting-Patch-Dispenser

I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…

Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
438
Polubienia
31
Ocena
5
P
PrintablesMarSzal7500

IKEA Skadis- 608 bearings dispenser- no supports

A dispenser for twelve standard 608 bearings compatible with the IKEA Skadis perforated board system. When printing, it is recommended to use a gyroidal infill and lower print speeds to maintain maximum precision, so that the bearings do…

Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu

Pobrania
411
Polubienia
137
Ocena
5

Wipe or Condom Dispenser (Wall or SKÅDIS mounted)

A wipe or condom dispenser that can be mounted on a wall or a SKÅDIS pegboard. This model mainly draws inspiration from Condom dispenser and Condom or wipe dispenser with lid & holder but is completely redesigned from scratch to hide the…

Wydruk około 11,87 €–14,51 € nettoWstępna wycena jednego wariantu

Pobrania
405
Polubienia
67
Ocena
4,75
P
Printablestickl

One Hand Operated Cat liquid treat dispenser for churu Bring Your Own Spoon

What? A onehand operated tool that can squeeze a stick of churu or whatever liquid pet treat you wish, into a spoon that can be slotted into the device. Much like the ones you find on amazon: Why? You need the other hand to groom or wash…

Wydruk około 12,84 €–15,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
375
Polubienia
61
Ocena
4

Menstrual product dispensers – collab FA CTU and Prusa3D

FA CTU brings a design that matters. This student-designed menstrual product dispenser was adapted for 3D printing to be accessible, easy to produce, and ready to use in schools, offices, and public spaces. The model is based on a design…

Wydruk około 7,53 €–9,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
365
Polubienia
286
Ocena
4,67
P
PrintablesRepoholy

Prusament Spool Tape Dispenser

Simple Tape Dispenser inspired by Prusament Spool design Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space…

Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu

Pobrania
344
Polubienia
128
Ocena
4,8
P
PrintablesPaparazziN

Straw dispenser

A simple straw dispenser I made, I used a hexagonal pattern on it to minimize the amount of filament needed (it is still a pretty big print though) and because it looks cool. Print settings 0.4 mm Nozzle 0.15 mm layer height Supports…

Wydruk około 18,61 €–22,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
293
Polubienia
42
Ocena
0
P
PrintablesAndy

Quick Release Suspension Clip for keychain (keys, multitools, etc.) (5 min. print)

This is a refined version of my previous deep pocket clip, to better match some of the stainless steel suspension clips you see being sold online. This is a simple S-shaped design, making it easy to snap on your keychain. I printed this…

Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
283
Polubienia
58
Ocena
5
P
PrintablesApex23

Ikea Skadis holder for Tamiya Masking Tape dispensers

Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.

Wydruk około 5,00 €–6,11 € nettoWstępna wycena jednego wariantu

Pobrania
276
Polubienia
34
Ocena
5
P
Printablespflug

Yet another Can Dispenser (10x 500ml, 67x169mm cans)

“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…

Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
271
Polubienia
62
Ocena
5
P
Printables3DPrintM.D.

Ergonomic SMD Solder Paste Dispenser for 1ml and 3ml Syringe

For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…

Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
265
Polubienia
61
Ocena
4,5
P
PrintablesOMac

Stained Glass - Copper Tape Dispenser and Organizer

This print does tend to peel up away from the edges towards the middle of the print. I suggest printing with a brim to help prevent excessive warping.

Wydruk około 25,44 €–31,10 € nettoWstępna wycena jednego wariantu

Pobrania
253
Polubienia
35
Ocena
5
P
PrintablesBash-T

Fountain pen cartridge dispenser box. Revolver drum-like storage box for ink pen cartridges

My daughter struggles with all the loose ink pen cartridges in her bag, so I designed a compact storing solution for them. Use an M3 screw (12mm max length) and two m3 serrated lock washers to screw the 3 parts together. Align the cap…

Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu

Pobrania
230
Polubienia
44
Ocena
4,75

Ergonomic tape dispenser

Artistic and ergonomic tape dispenser designed for office use. Compatible with usual office tapes. New GGvision studio creation.

Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu

Pobrania
230
Polubienia
46
Ocena
4,17
P

Pod Dispenser (Dishwasher Laundry)

A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…

Wydruk około 8,40 €–10,27 € nettoWstępna wycena jednego wariantu

Pobrania
226
Polubienia
61
Ocena
5
P
PrintablesMakafab

Sanitary pads dispenser

I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…

Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu

Pobrania
221
Polubienia
38
Ocena
4,33
P
PrintablesPrism08

McPherson Strut suspension for RC cars (1/12 scale)

This a first subset of my new RC car project. I'm trying to replicate as much as possible a European medium compact car at 1/12 scale (in the likes of a Peugeot 3008). Usually, these cars don't have a double wishbone suspension so I had…

Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu

Pobrania
219
Polubienia
46
Ocena
0
P
PrintablesMiguel M.

Heavy Tape Dispenser (One Hand Operation)

Description This is a heavy tape dispenser, If you have never used one, a heavy tape dispenser allows you to pull tape from it using only one hand while the other is free to hold the thing you want to secure in place. The dispenser is…

Wydruk około 12,51 €–15,29 € nettoWstępna wycena jednego wariantu

Pobrania
215
Polubienia
69
Ocena
0
P
PrintablesPetr

Updated: Alcohol barell dispenser v2.0

I recomand scale 77% x 77% x 70% 17.3.2022 - Release version 1.0 29.3.2022 - Updated version - bigger pipe and better stop

Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
208
Polubienia
22
Ocena
4,67
P
Printableskth0

Origami Folding Car w/ Suspension

Print easily in one flat sheet, and then fold into a pint-sized racer! No Supports Utilize a filament swap ~layer 20 for custom seat/engine color Compliant Mechanism suspension Instructions Fold the green lines slightly up. To do this…

Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu

Pobrania
205
Polubienia
70
Ocena
5
P
PrintablesIkeBerlin

Sanding Disc Dispenser 125mm (stackable) + Interlay with Tag

I added also an Interlay with a tag. Now everything is well organized in my tool box :-) Many thanks to bomas_ulz for the original model!

Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
202
Polubienia
41
Ocena
5
P
PrintablesKlabbis

RCBS RC IV spent primer catcher

spent primer catcher with side pipe for garden hose / tube with 12mm inner diameter. just klick in place. tube direct to a bucket or use adapter and drill a hole in water bottle cap for easy dispensing. modded the catcher and made also a…

Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu

Pobrania
190
Polubienia
13
Ocena
4
P
Printableskennyd1gital

Spent Primer Catch Tray for MEC 600Jr Mark V Mounted on Inline Fabrication Quick Change Plate

If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…

Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu

Pobrania
178
Polubienia
25
Ocena
0
P
PrintablesJack Frost
18+

Źródło oznaczyło ten model jako treść 18+.

Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
175
Polubienia
36
Ocena
5
P
Printablesel.pollo.diablo

Chocolate and candy dispenser

Easy to print and Assemble Mason Jar Candy Despenser. Requires: Wide Mouth Canning Jar (Mason Jar) n°2 M5 x 25mm Socket Head Cap Screw n°2 M5 nut n°1 M8 x 60mm Socket Head Cap Screw n°1 self-locking m8 nut (It absolutely needs to be…

Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu

Pobrania
167
Polubienia
84
Ocena
2
P
Printablesastrophage

Minimalist Tape Dispenser (Updated)

This model inspired by the beautiful Black + Blum One Handed Tape Dispenser (which is sadly no longer for sale as far as I can tell). This was quite challenging to recreate from the few reference photos I was able to find online, but I…

Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu

Pobrania
161
Polubienia
52
Ocena
5
P
Printablesbenedikt314159

Bin filler and dispenser for smaller parts, especially for WAGO clamps

Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…

Wydruk około 8,74 €–10,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
147
Polubienia
128
Ocena
0
P

Wet Cat Food Pouch Dispenser | Holds up to 12 Pouches

Keep your wet cat food pouches organized and easy to reach with this dispenser. It holds up to 12 standard-sized pouches and uses a simple gravity-fed design, so the next pouch is always ready to grab. A removable lid makes refilling…

Wydruk około 19,40 €–23,71 € nettoWstępna wycena jednego wariantu

Pobrania
137
Polubienia
15
Ocena
0
P
Printablesinfn8

Nespresso Vertuo Capsule Dispenser - Dual large

Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.

Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu

Pobrania
136
Polubienia
49
Ocena
0
P
PrintablesEdgar.A

Magnetic paper clip dispenser

Here's a magnetic paperclip dispenser inspired by those sold by maped. I use an 10mm magnet. If you print it at more than 0.10mm you'll need some support. That's why there are 2 g code files, 1 with supports and 1 without. Print detail :…

Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu

Pobrania
136
Polubienia
24
Ocena
0
P
PrintablesT03IAS

Condom dispenser

The model is a simple and easy to print condom dispenser. The STEP file is attached in order to make adjustments. I designed it for condoms of the brand EIS with dimensions of approx. 70x40mm.

Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu

Pobrania
129
Polubienia
29
Ocena
0
P
PrintablesExtra Fox

Elfa Utility Board Tape Dispenser

I wanted a tape reel for some various adhesive fastening products to hang from the Elfa utility board I have hanging above my work bench. My goal in the design was to create something as sturdy as possible, using the minimum amount of…

Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
127
Polubienia
27
Ocena
0
P
Printablesb8trez

Multix freezer bag dispenser hook

Hey friends, An Australian brand called Multix offers a free plastic hanger which can be screwed into kitchen cupboards to hang their freezer bags. We preferred to put ours on the side of the fridge rather than screw into a cupboard, so I…

Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
127
Polubienia
4
Ocena
0
P
PrintablesRepoholy

Tape dispenser beer crate

Simple tape dispensers in the form of the legendary beer crate model Tape dispenser for two tape spools side by side. You can easily store and use 2 types of tapes for example. Model containes 4 parts: Crate beer Lid with cutter part…

Wydruk około 4,97 €–6,07 € nettoWstępna wycena jednego wariantu

Pobrania
126
Polubienia
48
Ocena
3
P
PrintablesAudi

32mm and 78mm Tape Dispenser Spindles

Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…

Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
115
Polubienia
20
Ocena
0
P
Printablesmpatl

Weighted Cassette Tape Dispenser

This isn't a very complex remix. All thanks to the original model including the .step file. I've added screw holes for real screws and included hollow areas that can be filled with buckshot, fishing weights or sand (if using sand wad some…

Wydruk około 10,35 €–12,65 € nettoWstępna wycena jednego wariantu

Pobrania
111
Polubienia
37
Ocena
5
P
PrintablesAudi

32mm Tape Dispenser Spindle

This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
111
Polubienia
31
Ocena
0
P
PrintablesMetamere

Ben's Burly 3-Bolt Cage Mount For MTB Suspension Forks

The goal of this design was to make a 3-bolt water bottle/bikepacking cage mount that could be secured to the 43mm diameter lower tubes of my mountain bikes' suspension forks. I wanted it to be a very secure fit, strong, lightweight,…

Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
106
Polubienia
33
Ocena
0
P
PrintablesEdgar.A

Minimalist tape dispenser

Here is an design and minimalistic tape discouter for all the tape under 12mm.

Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu

Pobrania
104
Polubienia
18
Ocena
0
P
PrintablesFlo

TAMIYA damper/suspension lower spring retainer spare part (e.g. Plasma Edge II)

Only driven a few metres and the first part is already missing and there is no replacement in the packaging? Then print one quickly :-) Needs some Support. As shown in the slicer screenshot.

Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu

Pobrania
103
Polubienia
17
Ocena
0
P
PrintablesMike

Duplo brick for suspension bridge

This is a replacement Duplo brick for the suspension bridge. Print instructions Printer Brand: Prusa Rafts: No Supports: Yes Resolution: 0,2 Infill: 20 Das Filament PETG Orange

Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
99
Polubienia
36
Ocena
5
P

Wattestäbchen / Q-Tipps- und Pad Spender

Spender für Wattestäbchen und Make-Up pads. Ein kleiner Helfer fürs Bad und Hobby. Dispenser for cotton buds and make up removal pads Little helper for the Bathroom and Hobby

Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu

Pobrania
97
Polubienia
7
Ocena
0
P
PrintablesGCV3D

Vice Suspension Bookend

Overview Double-ended vice bookend that can be used to suspend your books in midair to add some flair to your bookshelf! I made the design in OnShape and there are a couple versions to choose from: Modern - sleek design with a modern…

Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu

Pobrania
92
Polubienia
77
Ocena
0
P
PrintablesExtra Fox

Elfa Utility Board Tape Dispenser - Serrated Insert Version

I made an alternative tape dispenser body for the Elfa Utility Board Tape Dispenser I posted. NOTE: This model is just the Tape Reel body. You'll need the rest of the parts from the main design. This version has the modeled in serrations…

Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
92
Polubienia
15
Ocena
0
P
PrintablesMrFlippant

3mm Slot Car Copper Braid Dispenser

Braid sold for slot car pick ups is often sold in one meter lengths that you need to cut yourself. These lengths are usually sold with no container, as a loose coil, which can be a PITA to put back where it goes pretty much every time you…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
89
Polubienia
5
Ocena
0
P
PrintablesfreakyDude

Slim Battery Dispenser 30xAAA

It's easy to print, as long as you have a clean printing quality. You can print it 2 color or single color. I used a 0.4mm nozzle and a layer height of 0.2mm Love my 3D models? If my designs have helped you print something awesome or…

Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu

Pobrania
87
Polubienia
22
Ocena
5
P
PrintablesMoNkEy

MK4 MK3/S/S+ Suspended Storage Box

If necessary, adjust the supports to allow them to fit together Distance from first support to engine approximately 12mm Distance of second support from first approximately 91mm Used printing profile 0.20mm STRUCTURAL (Input Shaper) I…

Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu

Pobrania
85
Polubienia
13
Ocena
5
P
PrintablesKC Wilkinson

ACME thread adapter for a Solo 330 Aerosol Smoke Dispenser.

ACME thread adapter for a Solo 330 Aerosol Smoke Dispenser. Had some very hard to reach smokes that the Solo pole would not get to. Made a ACME Female thread adapter to fit on a various number of painters poles. Now the sky is not the…

Wydruk około 3,84 €–4,69 € nettoWstępna wycena jednego wariantu

Pobrania
84
Polubienia
4
Ocena
0
P
PrintablesKhaosRipper

Pumpflaschen Wandhalterung - Pump flat wall bracket - Soap dispenser wall bracket

Pumpflachenwandhalterung Seifenspenderwandhalterung passend für den Seifenspender von "Jysk" https://jysk.de/badezimmer/badaccessoires/seifenspender/seifenspender-sangis-recyceltes-plastik Befestigt wird das ganze mit " Kleben statt…

Wydruk około 14,55 €–17,78 € nettoWstępna wycena jednego wariantu

Pobrania
70
Polubienia
11
Ocena
0
P
PrintablesjonnieZG

Stylish Poop Bag Dispenser

Description A simple, yet stylish dispenser for doggy poo bags. Printing Options The enclosed 3MF PrusaSlicer model files include: A version for single-color model with no embossed image (smooth top and bottom) A version with a bone image…

Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
8
Ocena
0
P
PrintablesNoWayCall

Skådis / Skadis C Cells (26500) Battery Dispenser

This is a simple Skadis holder for C cells (26500) inspired by popular AA / AAA dispenser type. The “holding bar” may not be necessary, but it helps with stability and better cell distribution. Small bed support are needed for the hooks.…

Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
12
Ocena
5
P
PrintablesRileyEnginerd

Houndy - Dog Leash Waste Bag Roll Holder and Dispenser

I was tired of those floppy clip on bag holders that seem to be everywhere, so I designed my own dispenser with a more secure attachment method. After several dozen prototypes and a couple years of real world testing, I'm sharing my…

Wydruk około 4,73 €–5,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
66
Polubienia
20
Ocena
5
P
PrintablesMao Hira

Masking tape dispenser

Dispenser for rather small masking tapes with inner diameter > 25 mm and width < 20 mm. Assemble two parts together to holed the tape. The looseness between the two parts can be adjusted by attaching some tapes around center circle of…

Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu

Pobrania
65
Polubienia
11
Ocena
0
P
Printables13Nitram

Condom dispenser Kondom box

Dá se použít jedna nebo dvě gumičky pro zvedání kondomu.

Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu

Pobrania
60
Polubienia
8
Ocena
0
P
PrintablesTheMagicUnicorn

Sponge dispenser

Ask me if you would like a custom size template or other drilling distances The main model can hold 5 sponges, he is for sponges smaller than 115x70 . I used it for IKEA Metod furniture with a drilling distance of : ≈ 32mm x ≈49.75…

Wydruk około 10,43 €–12,75 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
9
Ocena
5
P
Printablestwjst

Bouillon Cube Dispenser

Bouillon Cube Dispenser Simple dispenser which allows organization of bouillon cubes with a small footprint in a kitchen cupboard. It's sized to fit Knorr cubes available in Switzerland. Fusion 360 file is attached to easily adapt to your…

Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesDik Harrison

Tape dispenser for mounting on the side of a cabinet.

In my workshop, I was using a pegboard-mounted rod to hang my tapes on and wanted something better. I saw and tried "tape dispenser - side mounted" by book (https://www.printables.com/model/514012-tape-dispenser-side-mounted) but found it…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
12
Ocena
5
P
PrintablesDLD Design Fab

Swisspers Cotton Rounds Wall Dispenser

This is a wall-mounted Cotton Rounds dispenser. The design was done referencing the Swisspers brand of Cotton Rounds but may work for others. Wall mount fastener holes are sized for #6 pan head screws, so any drywall anchor or wood screw…

Wydruk około 12,52 €–15,31 € nettoWstępna wycena jednego wariantu

Pobrania
45
Polubienia
6
Ocena
0
P
PrintablesLOCKit

Raiser stand for cat water fountain dispenser or bowl no supports

Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
44
Polubienia
10
Ocena
0
P
Printablesredoktor

Soap dispenser key

Best results with PLA, layer height 0.7 mm, 25% infill and no supports. Created in FreeCAD. Printed with Prusa mini+.

Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu

Pobrania
44
Polubienia
6
Ocena
0
P
PrintablesThinksolid

Razor Blade Dispender AND Disposal (Parametric)

Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) For the parametric file visit: Razor Blade Dispender AND Disposal (parametric) - Free 3D Print Model -…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
32
Polubienia
7
Ocena
1
P
PrintablesMattis

0.50 €-Cent Dispenser

A wall-mountable dispenser for 0.50 € cent coins. Easily accessible by swiping the coins out from the bottom. Scale shows the amount of money in €. Attach to a wall with adhesive tape. If you are interested in modifying the model to fit…

Wydruk około 7,19 €–8,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
31
Polubienia
3
Ocena
5
P
PrintablesDabovos3D

Tape Dispenser

Simple tape dispenser with spikes, for easier dosing.

Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
8
Ocena
0
P
PrintablesLuluX

Soap dispenser

Print settings: Perimeters: 4 Solid layers Top / Bottom: 5 / 5 Scarf joint placement: Contours Material: PETG Optional Modifier: Range 0.00-141.00 mm Fuzz skin: Outside walls point distance: 2mm thickness: 0.1 mm Required hardware: soap…

Wydruk około 3,44 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesPrint4fun

seagull/duck soap dispenser for IKEA EKOLN

This is a cover for the IKEA EKOLN soap dispenser that is simply put together. I printed the parts on my MK4S using MMU3. All parts PLA 40% lightning infill

Wydruk około 19,45 €–23,78 € nettoWstępna wycena jednego wariantu

Pobrania
25
Polubienia
11
Ocena
0

Condom dispenser, wall mount (PROTOTYPE)

This device is a prototype only. Use at your own risk. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 6-7 hours Slicer settings: 0.25mm layer height, 3 perimeters, no supports needed Post…

Wydruk około 14,22 €–17,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesJacob

Wall-Mount Holder for Dispenser Bottles (Max Ø 70mm / 2.75")

A sturdy wall-mount holder for dispenser bottles with a maximum diameter of 70mm (2.75"). Designed for easy installation with screws, this holder provides secure and accessible storage for various bottles, including hand sanitizers.…

Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesAWSW

Tangle free 64 AAA battery dispenser.

Tangle free 64 AAA battery dispenser. On my way to another (bigger) project about battery management, I thought you might like this battery holder or dispenser which stacks the batteries tangle free, which most holders I tried so far…

Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
3
Ocena
0
P
Printablesdvir_we

stevia dispenser

Dispenser for Stevia

Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
7
Ocena
0
P
Printablespvillano

KN95 dispenser

A first-in-first-out dispenser for reusing KN95 masks

Wydruk około 14,43 €–17,64 € nettoWstępna wycena jednego wariantu

Pobrania
20
Polubienia
1
Ocena
0
P
Printables이 동국

Soap Dispenser wall hook (Zhiya)

You will need a glue gun or double-sided stickers to attach what you made to the wall. It may be a bit tight when you put it on for the first time. I used hot glue to attach the hook to the tile.

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
1
Ocena
0

Condom dispenser

Manufacturing instructions Material: PLA or PETG 3D Printer: Any FDM 3D printer Slicer settings: 4 perimeters to increase strength, no supports Post processing instructions: Clean the parts from stringing if needed, check if the parts…

Wydruk około 7,08 €–8,65 € nettoWstępna wycena jednego wariantu

Pobrania
18
Polubienia
2
Ocena
0

Mackerel Can Dispenser/Organizer

Gravity-fed dispenser that keeps your mackarel cans perfectly organized and accessible. It's perfect for keeping your kitchen cupboards neat and maximizing vertical shelf space. Sizes The cans i designed for are 30mm high and I made 2…

Wydruk około 3,51 €–4,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
18
Polubienia
9
Ocena
0
P
Printablesdhiltonp

Suspended Chest Freezer Tray Supports

I am using this with Home Depot's Vissani 8.8 cubic foot chest freezer, and 2 of Walmart's mainstay lasagna trays. The freezer measures 17.5" across the top and the tray measures about 16", so the supports are designed to take up about…

Wydruk około 6,06 €–7,40 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
12
Ocena
0
P
Printables3dprintcept

Selvequick mount /Bandage dispenser mount

used wit double sided tape. Neuu is with a thumbtack for stability.

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
2
Ocena
3
P
Printablesdl7auq

TRIXIE Food Dispenser Cover - Futterspender-Deckel - Art.-Nr. 5418

Food Dispenser Cover designed for TRIXIE Art.-Nr. 5418 Version v05 with rounded edges. The 100% version is a bit tight - therefore better to print with 101% (scaled in PrusaSlicer). Fusion file enclosed for adjustment. Print Settings…

Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesyynovik

Quakers oats top lid dispenser

It's a Pop-on/off top lid dispenser for standard old-fashioned Quaker's oats containers, making it easier to pour oats out of the container in a more controllable way. I use it to pre-make my weekly supply of overnight oats. This initial…

Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesmuseofwords

Mask Dispenser

Tried it with fuzzy skin an it looked nice

Wydruk około 16,55 €–20,22 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesnhuhoai

Top support for candies dispensor ~ Support supérieur pour distributeur de bonbons

(pour le français, voir plus bas) Top support for candies dispensor. Settings Nozzle : 4mm Resolution : 0.1mm Infill : 15% Rafts : no Support : yes Duration : ~1h15 Printer : Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini…

Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu

Pobrania
13
Polubienia
3
Ocena
5

Double Edge Safety Razor Blade Box Dispenser and Blade Holder

After a request from my close friend whom works as a barber, they requested a box dispenser to bring a bit more order to their workflow. Please note, check the model viewer first, as I have made minor distance changes to the counterbore…

Wydruk około 6,32 €–7,72 € nettoWstępna wycena jednego wariantu

Pobrania
12
Polubienia
3
Ocena
0