362 modeli
This is a simple yard/garden water sprinkler. It has no moving parts and creates approx a 30' (10m) diameter spray of water. It is printable with no supports required. The triangular outriggers are added to allow for a "Spike" or tent-peg…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
printable without supports for better quality recomended to print with 3 perimeters and layer height ≤ 0.2 mm detail profile rather than speed for speed profile use model with bigger holes, smaller holes could be filled 45° angle has…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Fully 3D printable lawn sprinkler that propels itself with water pressure and follows a path set by the garden hose. BOM: 3D Printed parts 1.5mm wire or paper clip ¾" BSP Standard Garden Hose Adapter Print Instructions: PLA (suggest…
A modern interpretation of classic cast iron sprinklers from the past. Water enters the side of the chamber and spins. The water exiting the top vent is also spinning quickly and the angular velocity slings the water outward rather than…
Wydruk około 4,18 €–5,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gardena Micro-Drip Sprinkler heads This is a sprinkler head for garden irrigation system based on the Gardena Micro-Drip hose. Models There are 3 models, for 3 diffferent angles: Angle File 160° Gardena Micro-Drip Sprinkler 3.stl 100°…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Collapsible Water Sprinkler (Print in Place) Sweet collapsible water sprinkler for your kids. The water connection needs a little support. You only need the original seal of an adapter for the tightness. Model printed with: Prusament PETG…
Wydruk około 3,65 €–4,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My wife wanted this to fit US soda bottle. I modified the Fusion 360 source (thank you for publishing!). I had to change the thread pattern – had to print several tests to get it correct. This new thread pitch and diameter is for US soda…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
The female thread works with a US garden hose (0.75 11.5NH seems to work well). The male thread is BSP 0.75, which I guess is used on some sprinklers in the UK and/or EU? TBH I'm not entirely sure if this is useful for any more than one…
necessities 1x o-ring (11mm diameter and 2,5mm thickness) o-ring can be taken from an old hose coupler. Assembly After you have printed the nozzle file, insert the o-ring on the nozzle like in the photo's. the caps can be easily screwed…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
hi everyone, my old are leaking sor i design a replacement. Bonjour, Mon ancienne tête d'arrosoir fuite et n'est pas tres pratique alors j'en est créer une autre. Print instructions i add a big brim to make it easy to print. i you don't…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed to replace the sprayer type sprinklers in my environmental septic system. The Kikuyu grass grows tall and it is hard to see the location of the tiny sprayers. I designed a T connector that presses into a piece of 19mm poly pipe,…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Water your plants more evenly with this adapter/nozzle Arrosez vos plantes de manière plus homogène grace à cet embout d'arrosage Za pomocą tej dyszy podlewaj rośliny bardziej równomiernie
English Gardena Sprinkler Mount 3in1 This mount is designed for the following Gardena Sprinklers: Classic Polo Comfort Aquazoom AquaZoom M (Other Gardena sprinklers have not been tested yet, but they might fit.) What you need: Broom…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When using a powerful pump and large areas of irrigation, a powerful tool is required. The spray angle is adjustable. When assembling the case, use super glue. P.s. V2.0. For ease of printing, a disassemblable model has been created. For…
Wydruk około 5,45 €–6,66 € nettoWstępna wycena jednego wariantu
Printed on Creality Ender 3 V2 0.20mm NORMAL SPEED 0.4mm nozzle Fill: 5% Supports: Yes (Only for SmallRocket.stl )
3D Printed Vortex Sprinkler – No Moving Parts, Ready to Use This innovative sprinkler is designed for hassle-free use straight off the 3D printer. No assembly or post-processing required. With a smart, print-in-place design and zero…
This is an easily printable sprinkler system for your garden. You can snap your sprinkler on the stick and you can stick it into the soil. You can conect the sprinklers with ½" hose. Update 2021.04.02: I have added a new type of sprinkler…
3D Printable sprinkler. watch the full video here:
printed at 0.2 layer 4 perimeters with petg for a bit of strength, now in 2 parts to make printing easier, using my p1p it fits perfectly the ¾ bsp tap fitting , used variable layer height for the top of the threads so no supports need…
This is a simple "Plume" sprinkler / myster / water blaster thingie. Gives nice coverage even at low pressure, more of a mist than droplets. Can be used as a hand watering tool too, or even as a "crazy blaster" by putting it on the end of…
English: This one is a very quick and dirty mockup of Gardena bottle cap by ahoeben ( http://www.thingiverse.com/thing:148310 ) and the Lawn Sprinkler by falcon20cne ( http://www.thingiverse.com/thing:414552 ). I just put those two things…
Two angles because I made one, it worked perfectly, but wasn't at the angle normal sprinkler heads are, so I increased the angle. Both work well, second one in action. Made for a can with a 18.5mm diameter push-fit nozzle. Printed in…
Grass Protection Ring for Rotary Sprinkler Head Prevents Grass from growing over your sprinkler head by doubling the ring around it. Features Promotes smooth operation of your rotary head. Extends down to the earth to prevent lifting…
Garden watering can sprinkler / Kropítko na zahradní konev
A simple and small sprinkler i made for my raised bed. Video: https://youtu.be/ph-5ruPQspw The diameter of the hose connecter is 7mm. So a hose with 6mm inner diameter should work fine. I used an ordinary pond pump and it doesn't require…
Update 2: Added insert caps that fit inside existing sprinkler caps to seal off water flow. I found these work better as you don't need to worry about cleaning up threads. It's also using less material. Update: After being in service for…
IF YOU SPRINKLE WHEN YOU TINKLE BE A SWEETIE AND WIPE THE SEATIE made by MATT GERMAN 100MM X 75.4MM X 3.5MM 0.3 MM LAYER HIGHT 0.8 WALLS
This is a small gauge for measuring sprinkler output in your lawn. Place these at various distances from your sprinkler heads to test flow rate and consistency. Each mark is ¼ inch and the maximum measurement is 1 ½ inches. Printed in…
Grandmaster Sprinkler inspired by Grow a Garden. If you have an issue printing make sure to comment and let me know. And if you want an another 3D grow a garden model (gear, friut, pet) let me know.
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
Adjustable sprinklers for 4.6mm (3/16") hose. The flow through the sprinkler may be adjusted by twisting the cap. Multiple sprinklers may be places in series using the provided tee. The sprinklers uses a 2.4 x 18 (OD) mm O-rings to reduce…
Origin My household uses a lot of Sodastream water and we have a fairly large collection of these clear polycarbonate bottles acquired over time, but as they age the “expire” and can be unsafe for pressurized use. Design Parts: Solid cap…
I keep replacing the donuts on my irrigation sprinklers ever year or two whether I want to or not. Between people stepping on them, bikers riding over them or the occasional person parking on one I seem to loose 5+ a year. At $3 to 5 a…
Ich habe die Kopfe und teilweise die Anschlüsse angepasst. Da bei der original Versionen nicht verfügbar sind. Die Köpfe habe ich alle neu entworfen und mit Gummi ringen geplant. Damit die Düse auch richtig funktioniert.
Kropítko na zahradní konev průměr 34mm - Sprinkle for garden watering can diameter 34mm
Place it holes up for a sprinkler or holes down to use as a soaker. needs an O ring to fit hose adapters print with support on build plate
Little shower head to be put on a water tap outlet. Spreads out a concentrated stream to a gentle shower. Ideal for childen to play in the bathtub. Connects via the EU typical thread of M24x1mm. So it is compatible with all household…
Kropítko na zahradní konev průměr 25mm - Sprinkle for garden watering can diameter 25mm
Garden Sprinkler is able to be printed in place, and should screw into common garden hose threads. There are also adapters in case you don't have the end you need on the hose, and a stand to put the sprinkler on, and to stick it into the…
This is an extension for Rainbird and Hunter sprinkler heads. They sell 6in long ones, but not anything between. There are a 1.5in and 2.0in extensions included here. These allow you to get the water above the grass where it is tall or…
Please print these in ABS or other filament that does not deteriorate when left outside. Print with supports (I use tree slim supports). To put these together you need some screws and washers. I just found some random screws and washers…
Was added the quick connector for garden hose. Second file contains the update of sprinkler for lower pressure. If you choose lower-pressure, please improve infill, standard 15% is bad, it will have the holes in the different places. The…
For those times you can't bury the sprinkler spike in your lawn, you can use one side of your empty Prusament spool. It depends on your local pressure, but I may cover 2-3m diameter. I'm working on the rotative version, so stay tuned for…
Use the template and place it on parchment paper, then put royal icing evenly on top of the template and use the spreader to evenly distribute the icing across all of the template, wait a few minutes for icing to dry, remove the template,…
Mostly the same as SPRINKLER base model, but with the BSP 0.75 threads of the inlet port replaced so that they extend to the outer part of the inlet port. The .f3d file is included in case anyone wants to see how the threads were…
Ring for lawn sprinkler heads, to keep the grass from interfering with the operation. Makes it easier to weed-eat around them without damage, also makes them easier to locate and repair. The small size is for sprinkler heads less than…
This is a worm gear for a Nelson garden sprinkler tractor. There are two versions, one with 14 tpi threads included in the model and one uncut for tapping. A friend of mine printed it in ABS with 100% infill and it worked fine.
For printing support is needed; if you use organic support structure you can delete the support structure after printing very easy.. PLA and PETG are both fine. The seal is printed with TPU.
This 6"x6" (152.4mm x 152.4mm) stencil is covered in little sprinkle shapes for all your stamping/painting/coloring projects. Enjoy and happy making!
My traveling tractor sprinkler has had a hard life. The original wheels are sun-bleached and cracking/flaking and aren't much longer for this world. Since I just replaced the drive box and stripped most of the bright yellow paint, I…
I remixed a microdrip holder to hold the small micro drip tube (4,6 mm (3/16")) with a spray nozzle vertically. The nozzle will be roughly 15cm above ground (depending how deep you push it into the soil). This way I can use a spray nozzle…
Lehce modifikováno. Vnitřní průměr konstantní cca 33mm. Vnitřní průměr proměnný 26 - 29mm. Velikost rozstřiku zvětšena na 100mm. Bez podpor. Slightly modified. Inner diameter constant approx. 33mm. Inner diameter variable 26 - 29mm. Spray…
Gear for Nelson traveling sprinklers. This one seems to be the one that always breaks/strips.
Mandalorian helmet water sprinkler. Standing at 81mm, suits 20 mm (¾”) BSP water hose connections. Updated from previous version to larger fewer holes. .stl & .3mf files available. Print suggestion: print at layer height of 0.16mm tree…
2 MM BASKILI 4 DUVAR YERİNDE BASKI İÇİN DESTEK GEREKMEZ
This is a simple sprinkler head that fits into 1/4" drip irrigation tubing. It is distance adjustable using a 4-40 (or similar size) screw threaded through one of the holes in the top of the deflector piece. Printed in ABS, as this will…
My solution for replacing and cleaning Hunter MP Rotator nozzles. The MP Rotator system has proven itself over time. It is reliable and efficient. But there are minor inconveniences in terms of maintenance. The water that is supplied to…
I created these from scratch and tested several versions of them to get a great result and a great spray all around. Files included are 180 degrees, 90 degrees, and 45 degrees
For this competition, I thought that a rotating garden sprinkler system would be the right thing to do, and it would also be a real challenge. I'm glad I managed to post a functioning sprinkler on the last day. The individual parts…
This is a 3D Sprinkler designed to water your potted plants. Just place the sprinkler around it without having to uproot your plant, as it is cut at an angle of 30 degrees. Video link: https://youtu.be/y1kl_0LNISU Walls of sprinkler are 2…
I really liked the sprinkler head extraction tools published by Hanselcj, however, none of them fit my Rain Bird sprinklers. The pattern for the Hunter PGP sprinklers is very close, but the size is wrong. I quickly messed with the…
Friends gardeners, farmers and makers, I am happy to share with you my concept of plant perfusion !! You can now go on weekends or holidays with peace of mind, your harvest is protected. I designed this adjustable gravity drip sprinkler…
does not increase plant size yet.
Irrigation Sprinkler Protectors for Orbit Saturn-III and Voyager-II gear drive sprinkler heads. My models are inspired by @jimerb_132206 Grass Protection Ring but designed from scratch to completely cover the head except for the riser.…
Glock 34 jet sprinkler , designed for directional control of water delivery, delivering a targeted water jet thanks to the pistol grip. The nozzle diameter optimises pressure and flow, producing a powerful jet without requiring complex…
Download the Adapter & Cap Printer brand: Creality Printer: CR-10 Mini Rafts: No Support: No Resolution: 0.2 Infill: 15-25 Software: Cura 5.2.1 Nozzle: 0.6 Filament brand: PRIMACREATOR Filament color: Red Matt Filament material: PLA
I did not find any cool and working designs so i made my own. The Model is designed for 1/4 inch or 4mm inner diameter Tube. I uploaded some spayer sizes but the Fusion file is attached. Printed in ABS+ but any other Material should work…
my watering can sprinkler head was broken, and I designed and printed one as a replacement print with ABS or ASA would be ideal for outdoor use, but PETG or PLA would be fine as well Buy me a coffee: https://paypal.me/leositu Thank you!
Extending sprinkler system ∅8mm connector
Nozzle for a 15mm watering can tube, easy to print. Scalable to fit your watering can. Depending on your printers precision the sprinkle holes may need some afterwork with a small drill bit. Print Settings: Supports: Likely not, depends…
This is my very first attempt at building a water sprinkler, so if you have any suggestions for improvements, I would be grateful. It has 3 x 12 holes (minus one) at angle 30, 45 and 60 An anchor can be attached to the bottom of the…
Now with sprinkles! Printed with .08mm layer height on a bambu lab x1c. I recommend printing the model with supports, laying along its long end sticking 45deg into the air (see 3mf for example). Paint supports onto the end against the…
Simple nozzle for the Kaercher OC3 cleaner with five holes that results in a low pressure / high flow spray. Great for washing things down after cleaning if you just need more flow than provided by the default jet nozzle. Print…
After spending a considerable amount of money on these pop-up sprinklers and needing only the internals, I decided I had had enough. I modeled the internal piece where the spray nozzle connects to your irrigation line. Please note that to…
The XTEInk X4 Pro is a great little e-ink reader, but it's also very small and thin, which makes it very fragile. I looked at some commercial alternatives for cases, but was unhappy with them. I then found the Sprinkle XTEInk X4 Pro Case…
This is an ultra simple sprinkler nozzle with a female garden hose thread (GHT) connection and a wide directional spray. I had a friend send me a picture of a very old much-loved sprinkler like this and asked if I could make one. There…
This is a minor remake of the https://www.thingiverse.com/thing:3068655 by 3DPNoob. Thanks for the great design! After printing out multiple other sprinklers with moving parts with no great success, since I am only running a rainwater…
[CZ] Kropička na malou konev. Náhradní kropička k malé konvi na zalévání květin. Pro průměr hrdla 14.5mm. [ENG] Sprinkler on a small watering can. Replacement sprinkler for a small watering can. For neck diameter 14.5mm. Category: Outdoor…
Be sure to print a bakers dozen and try various colors and filaments to see what might look yummy. Don't eat this obviously. I printed many of these, one of which looks like cookies and cream! (Prusament Marble Grey PLA) Printed with a…
This ½" shrub adapter is specifically designed for Hunter sprinkler nozzles, but Rain Bird nozzles will work too. Pictured with a Hunter MP Rotator. Note that the nozzle does NOT make contact with the base of the adapter as to ensure…
I adjusted the width, length and height of the hook to my needs and added Gardena logos for a nice look. my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.6 Resolution: 0.28 Walls: 3 Infill: 10% Material: Brand: Eono Material:…
This is a clip to hold the sprinkler rotor shaft when making adjustments.
These tops are always breaking off. I have printed several of these and they have held up for years without issues. Snaps on. You will want to keep the center nut. I printed in PETG and PLA+ white. Included is the model for the center cap
I love the design of Jacks Traktor Sprinkler, however I had a few of issues with the central mast or pinion of the mechanism. The printed pinions always broke right at the upper thread, just a tiny bit of force on the spray-arm and it…
This is a holder that allows Orbit Voyager II and Saturn III in-ground sprinklers to temporarily be used above ground. Originally planned as a way to help check coverage areas before trenching, they also allow you to run the sprinklers…
Sprinklecap Gnome – Sweeten Up Your Prints! Say hello to the Sprinklecap Gnome – a delightful blend of charm and whimsy straight from the candy-coated corners of the fairy forest! Few supports are needed. I used organic-style supports,…
A small Toro fairway sprinkler key in poket version. Should fit every Toro sprinkler and can be used on a keyring. Very usefull for a Greenkeeper. I used PETG and 100% Infill. Very easy and fast to print.
A car was missing plug/cover for windscreen sprinkler tank filler. Simple design, mant to be snap fit on the genuine filler. Might work for others GMC/Opel models. Internal diameter is 46 mm, internal height 10 mm. Print Settings Printer…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Sprinklepede, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
EN: This is a sprinkler for garden watering can diameter 34mm. This sprinkler can be screwed, it can be cleaned of dirt. Material: ABS or PETG Printing: with support (better are maybe tree supports) CZ: Jedná se o kropítko pro zahradní…
Mostly taken from jimerb's original file: https://www.printables.com/model/256225-grass-protection-ring-for-rotary-sprinkler-head Grass Protection Ring for Rotary Sprinkler Head - Remixed with partial parametric dimensions Prevents Grass…
The whole project is based on and of course compatible to the “sprinkler rocket” by Sevro from Makerworld: https://makerworld.com/en/models/1370364-sprinkler-rocket The rocket shown in the picture is the slim-rocket from there. I wanted…
Thanks to TheMADEngineer for his design, which looks like it solves a similar problem. I was not happy with my original design however so used the sprinkler pattern from his model, scaled to fit. The square hole to one side is because the…
Reproduce of original cheap mini sprinkler “shrubbler” 360° mini sprinkler. Printed in PETG 0.2mm.
A delicious and realistic treat. Yes there are a lot of filament changes but they are all on the top! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is a replacement sprinkler head cap for one of my (old and now discontinued) Hunter SRS based irrigation system sprinkler heads. Cap broke and I decided to try replacing the failed part with a 3D printed one instead digging out and…
![Master Sprinkler, [Roblox, Grow A Garden]](https://media.printables.com/media/prints/302b1d4a-ad71-49f5-9f4b-04d9c5dd1cfc/images/10652627_7f43b2d5-b93e-459a-80cf-c172cef32ea5_4b70c5f8-fe2c-4ec3-988b-f1a5cde57e5c/2025-08-03_f7647f0ee8fbe.webp)
