Wyniki wyszukiwania: stene

Benchmade 62 balisong butterfly knife M3 fasteners

Tiny Toy Blaster V2 (6mm Airsoft Toy Gun) No Glue, No Fasteners: Just Rubber Bands and Prints

Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…

very flat snap fastener - i.e. for wallets or fabric

I contructed this snap fastener / press stud to repair my wallet. After printing, simply sew on with needle and thread. Used it on my wallet for the last 2 month now - and it worked quit flawless. Print instructions I printed with: 0.6mm…

Volleyball Netzspanner / Volleyball Netfastener

Ich drucke dieses Modell mit einem Elegoo Neptune 4 und nutze Cura als slicer. Ich würde Fuzzy Skin und Supports empfehlen. I'm printing this model with an Elegoo Neptune 4 and using Cura as a slicer. I would recommend Fuzzy Skin and…

Gurtspanner / Strap Fastener Version 2

Verbesserte Version des Gurtspanners . Ich nutze ihn um die Batterie in meinem Auto fest zu zurren. Es sind zwei Varianten verfügbar: klappspanner_v2_20.stl für einen 20mm Gurt klappspanner_v2_26.stl für einen 26 mm Gurt -------- Enhanced…

Müllex trash bin fastener ~ Cyclindre de fixation pour poubelle Müllex

(pour le français, voir plus bas) Müllex Single 35 trash bin fastener. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : yes Support : no Duration : ~40m Printer : Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini…

Fixing screw for a bajonett fastener

The parts are printed with PETG and do not need supports. The fixing screw fits for e.g. receptable of CAMLOC 2600/2700 series. Size of mounting hole in plexiglass window: ⌀12,3-⌀12,5mm Suitable for thickness: 5-6mm Wrench size of double…

Floating Aquarium mine - no support, no glue, no fasteners

Happy printing, and if you like my models you can follow me for more awesomeness! I designed this sea-mine last month as a challenge for our pet crayfish Crusty. He was always climbing everything (air pipes, thermometer, plants) and is…

Prusa Core One Door Fastener

Introduction Recently i ordered the Prusa Core One Kit. The assembly was fun, the machine works great. Last night my door handle fell off - maybe I did not clean it properly. However, there are holes prepared in the orange metal handle as…

IKEA Samla 22L Lid fastener

Purchased some 22L Samla from IKEA but they said that opposed to the 44 lits one, the 22L does not have lid fasteners. Well now it does since i thought it was a good addition to make a dry box for my filaments. Cheers. Print instructions…

Hook and loop fastener

The height of the female connector can be customized; the lower the height, the weaker the force of the female connector.

HSW - Easier Inserts & Fasteners

Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…

Honeycomb Storage Wall (HSW) - Special Fasteners

Some special fasteners

Universal self locking fastener (Screwdriver, Cables, etc.)

Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…

Circular Fastener (Hose Clamp)

INFO Circular fastening, cylindrical gripper, variable diameter connector, jubilee clip, hose clamp or adjustable radial constriction device that will grip firmly around a cylinder, a rod or pole - typically used to secure a hose to an…

Locking rivet, fastener

I could not find an acceptable 3D printable rivet, fastener for my Crocs' strap so I decided to make my own. Printed in PETG with 0.10mm layer height, no support. Please enable sequential printing at Print settings - Output options -…

GT2 Belt Fastener

A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.

2020 T-Slot Extrusion Quick Fastener

This is a 2020 T-Slot removable locking/sliding fastener to be incorporated in other designs for attaching accessories to printers with 2020 bars. I have a Creality Ender 5 which has 2020 top and bottom rails or crossbars. UPDATE: BE…

Cable Management Box V2 • Cantilever Clip Fasteners • Fits 12.2"x5"x1.29" Surge Protectors

Updated v1 box with v2 cantilever clips and included more sizes which can be found here --→ https://www.printables.com/model/146721-cable-management-box Cable management box to store surge protectors and tidy up cables. Now with…

Fastener for NorcoT Creality K1 Max Glass Lid Raiser (with Sliding Vents)

Fastener for lid raiser made by Tony F for the Creality K1 Max printer.

The Ultimate Metric Fastener and Wrench Kit - Hex Heads

Sometimes it is hard to find the right fastener for your project, so here's a kit for you! This kit contains hex head metric bolts, nuts, washers for M5, M6, M8, M10, M12 and M16! Not only you can print some fasteners for your projects,…

Trim Removal Tool - Snap Rivet - Fastener - Retainer NEW VERSION

Trim Removal Tool - Snap Rivet - Fastener - Retainer NEW VERSION Resize to adjust dimensions - If you download/enjoyed this file, please leave a like - Thx

marine snap fastener

3d printable version of a snap fastener that will also connect to the real world marine snap fasteners. Category: Hobby

Customizable Cable Wire Holder Mount Clip Clamp Fastener (parametric in FreeCAD)

I needed to mount a cable in a fixed position in my DIY device but surprisingly I couldn't find any clip model for my cable thickness. This is why I decided to make a parametric model to quickly generate new cable clips for any cable size…

True-FLEX Featherboard with accessories (1/4-20 fasteners)

Inspired from Kreg True-FLEX™ Featherboards There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to print but need a little more material (~15%). « TF_Featherboard.stl » need less material, but is a little harder to…

Gridfinity M3 Fastener Bins with Printed Labels

A set of M3 fastener bins based on the Gridfinity standard. The main idea of Gridfinity is to take only what you need out of storage for a project. The bins have the labels printed in, they are separate objects in the file. The list for…

Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.4

Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.4 We have fully implemented the updated design, refined and cleaned up all geometries, and optimized every feature for reliable 3D printing. The result is a stronger, more…

Camping Tent Rope Fastener Guyline Tensioner Lock 3 Holes Rope Tensioner Camping Accessory

These three hole rope tensioners are great! I couldn't believe this model wasn't already on thingiverse. Use them for any rope. Tents etc. Category: Sport & Outdoors

Weighted Balisong M4 Fasteners

Edit: I've reverse-engineered the model into proper STEP files if you want to edit it. Also available on OnShape under the name Balisong Mk II. The STEP files are the most up-to-date files and the ones I would recommend using. With…

Triple hinge handcuffs remix (fasteners, no glue)

I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…

Hidden Fastener Coathook

This two part coat-hook is perfect if you don't want any visible fasteners on your walls. Use your choice of screws to attach the mount to your wall with the chamfered edges upwards, then slide the hook onto the mount. The mount comes in…

Cardboard Box Brackets, Fasteners and Joiners for DIY Playhouses (and other structures)

I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…

Auto Clip Fastener

My girlfriend hit my car.. so I remade the bumper clips that exploded when she hit it. Probably fits 9-12mm holes but I used for 9mm PRINT INSTRUCTIONS: ANY PLA WORKS ( I USED PLA BASIC) but more flexible the better pla basic is pretty…

Cable Fastener Clip

Simple Cable Cip. can be resized according to need

Cable fastener, 8-10mm, screwable

I needed some few cable fasteners to fix a cable on a kitchen cabinet. I had the choice to order a set of 100 and wait some days for delivery or to design my own and print them in less that one hour…

Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.3

Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.3 Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed…

Wall Hook - Hidden Fasteners

A two piece print which slides together with a tapered dovetail for a snug fit. Just screw the base in place, and slide the hook into the mating dovetail. The taper should allow some forgiveness on print accuracy.

Porsche 986 Boxster / 996 Front Trim Fastener

3D model of the Porsche Boxster 986 and probably 911 996 frunk trim cover fastener. Porsche part # 999 590 036 40. Most of mine were broken or missing, so I remodeled them in CAD and printed my own rather than giving more money to the…

Gridfinity M3 - M5 fastener bins with labels

Gridfinity boxes for M2-M5 screws, washers, and nuts

ESP32 Cam Case - No Fasteners Needed - Fully 3D Printed

This case will hold your ESP32 Cam and make sure its ventilated. There is a ventilation hole in the front, and the back is open to let the heat escape. You can also take advantage of the open back to attach a heatsink. This case does not…

Cable clip/clamp/fastener

Simple cable clip with 12 mm diameter. Can be resized according to need.

Kärcher Filter Fastener

TL;DR Save money, reduce waste, and avoid the hassle of searching for a lost filter fastener in your vacuum cleaner's dirt by 3D printing a replacement instead of buying a new one. Collection exercise, CAD Motivation I dropped it. Let's…

Xiaomi Mi Band fastener

Print and then glue in place

Remover Tool for Snap Rivet - Fastener - Retainer Clip

Remover Tool for Snap Rivet - Fastener - Retainer Clip Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hand Tools

Water Line 1/2" Half Inch Copper Pipe Strap Bracket Mount Fastener (many possible names) That comes in 2 tightnesses!

I'm back at replacing my local hardware store. This time with copper pipe straps for 1/2" copper pipe. Blender file included. The first one ended up being a bit tight so I made a slightly bigger one in case you don't need it so tight.

Creality K1 Max side mount lid holder for standard M3 fasteners

This is a side mounted lid holder designed for the top glass lid of the Creality K1 Max printer. It is deep enough to support the use of normal socket head cap screws, and not the low profile type that is much less common to have on hand.…

Circle game gravity knife (fasteners, no screws)

Printing Print all parts as they are orineted in the project file. Use a lower layer height for the screws and the blade for finer treads, 0.15 worked just fine for me. Use supports on the inner half of the handle and use 100% solid…

Nicotine/Snus jar clip-on fastener

Fits a jar with dimensions of 70 mm and height 25 mm.You must use supports when printing this.I recommend printing with petg or abs.

Buckle fastener for various applications

I made this little buckle fastener as sparepart. Print information: Printed with PETG 80% infill layer height 0,2 mm printed with organic supports

Universal 10mm Push fastener

Universal 10mm push fastener. Mostly used in fender wells and engine bays to hold plastic molding and panels. Sizeable to your application. I used TPU and Flexible PLA for the bottom and PTEG PRO or PLA + for the top. I prefer the PLA+…

Ergonomic Organizer for Fasteners (e.g. for CORE One Kit Build)

30-Slot Organizer for Fasteners – optimized for MK4 / CORE One / etc. This is a compact, ergonomic organizer for 30 different fasteners — perfect for building a Prusa MK4, CORE One, etc. Made it while building the Prusa CORE One for the…

Height adjustable snap fastener

A friend had asked me if I could make something to hold foam sheets together (non-permanent and easily removable) for cosplay. My model works like a cheap plastic sew-on-snap (but with 5 height settings). It was made to be printed…

Zijdeur Trim Moulding Strip Auto Fasteners Plastic Clips voor Volkswagen Golf MK1 Jetta MK1

If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul Zijdeur/spatbord/achterpaneel Trim Moulding Strip Auto Fasteners Plastic Clips voor VW/GOLF/MK1/Jetta als pen gebruik je een stukje 1.75mm filament Side…

Quick Release Clamp M4 fasteners

Two parts require supports. I have included them with and without designed supports. Additional parts required: quantity 2 M4 standard nuts quantity 1 socket head cap screw (40 to 50mm long) I have included a .stp file of my design like…

Gridfinity - Labeled Fastener Bin: Vase w/ base infill

My goal is to replace all the mishmash of fastener bins with filament efficient and strong bins. This prints in just over an hour and with 34g of filament. It has 6 bins in a 1x4 footprint and fits standard labels. I love the divided vase…

Fastener for Paper / Card Stock

Home with my son who has COVID and he needed some brass fasteners to make a model of the sun / moon / earth where they could revolve appropriately. Didn't have brass fasteners and couldn't leave the house, so I found luquad525's “Locking…

Axis fasteners

My own version of axis fasteners(bracket) for the EASYTHREED K10 3D machine.

Variable Snap Button Fastener

A snap fastener for a wide range of applications. This snap fastener features multiple notches for holding materials of varying thicknesses together. One version comes with a shorter pin for the closed counter-fastener, the other with a…

Heavy double chain handcuffs remix (fasteners, no glue)

I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…

Beschlaege (Kistenecken, Schutzecken)

ReadMe.txt Beschlaege für Holz-Kiste Winkel und Eckstück 30x30mm 40x40mm 50x50mm Material: PLA Schichtdicke: 0,2mm Düse: 0,4mm Füllung: 20% Nacharbeiten: eigentlich keine man kann für die Schrauben senken Gezeichnet mit: Freecad V018…

Keycap Puller | Tastenentfernen | Tastatur

Schnell und einfach die Tasten deiner mechanischen Tastatur entfernen.

Skådis Modular Drawer System Fastener

I'm a big fan of the Fast-Printing Modular Drawer System (Vase Mode) by LR3DUK https://www.printables.com/model/139570-fast-printing-modular-drawer-system-vase-mode I wanted it to be fitted on my Skådis pegboard, so I made this little…

1/4 push fastener & retainer

Easily attached items without the need for screws or bolts. This push pin is created for use with a 0.25" diameter hole and has a grip length of 0.16". Just push the pin through the holes to fasten components together. To remove, gently…

Prusa CORE One Door Handle Fastener (Hex Nut/Bolt Mount)

Various styles of Prusa CORE One door handle fasteners designed to be small, discrete, and nonintrusive: Block - Parallel edges Flared - Angled edges Round - Circular You will need: (2) M3nN nuts ***Update 2026/05/16 - after I found…

Vassoura Suporte ( broom fastener)

As duas peças podem ser impressas juntas, use parafuso com chanfro , utilizei uma fita dupla face para facilitar e o cabo da vassoura não escorregar

fastener_simplified

Simplified version of the original to allow for support free printing in any orientation.

Screwiverse Insert and Screw for Standard Honeycomb Storage Wall (HSW) Fasteners

Screwiverse but sized for native HSW fasteners! I loved the idea of Screwiverse, but being unable to use the massive library of existing HSW fasteners without an adapter was less than optimal. I expanded the opening in the insert and the…

Lunchbox Fastener / Vesperbox Verschluss Updated Sept 2024

A friend of mine asked me, to help him out and then I realized, that they changed some measures (or it is a slightly different version). So I made some changes in V4 (15.09.2024) Description My daughter got a pretty good lunchbox for…

Under Desk Drawers with hidden fastener.

use manual support for case. Use hand support from the front only. for the fastening case, draw support only at the fastening points, use a tree-like one. Only from the table. It will pass through the holes, and all the fastening to the…

Prusa CORE One Door Nut Wedge / Fastener

The double sided tape for the Prusa CORE One door handle doesn't hold up well against higher chamber temperature prints, and would fall off. You can use a M3n nut to fasten a M3x10 or M3x8 screw, but it's quite ugly from the outside. The…

Rivet Fastener Kit - Modular Racking System

Accessory for my Modular Racking System Hardware haters, rejoice! These two-piece rivets are a printable alternative for using M3 fasteners on my racking. There are square headed and round headed variations of 3 lengths (equivalents of…

fastener

fastener

Parametric (OpenSCAD), mix and match fastener labels for Gridfinity Bins by Pred

This is still a work in progress. I'm changing things as I refine the model. Parametric model to generate labels for all screw types I could devise. Mix and match: Head types: Socket, button, flat. Head keys: Hex, slot, phillips, torx,…

Fastener for racing track Ites / Faro / česká autodráha (sponka na autodráhu)

Main aim Cheap and simple replacement of the original fastener. That is buyable on https://www.ites.cz/eshop/dily-drahy/spony-autodrahy-24-ks.html Print settings PLA OR PET-G 100% infill 0.15 layer Notes Prepared 3mf file for Prusa Mini…

Fastener plug for a Subaru car.

Took measurements from one of the retainer pins that my car had left in the cargo trunk area and made a 3d model. The car is a 2001 Subaru Impreza so i'm guessing the Subaru cars around that year would use the same. Better print the model…

RCBS Primer Catcher fastener

Replacement fastener for RCBS Primer Catcher fastener. If you reload your own bullets, and have an RCBS reloading press with a primer catcher, but have broken or lost the little crecent-shaped fastener piece that holds it in place,…

Snap fasteners / Botones de presión

They can be useful for integrating into other multi-piece designs and joining pieces together.

ESP32 Case / cover (no fasteners needed)

This is an case for an ESP32 board with room for cables to be solderd to the pins.

Pinch-proof Benchmade 62 balisong butterfly knife M3 fasteners

In the original model, if I squeezed the handle too hard I could pinch the blade which prevented it from moving. I added a back to prevent that. Make sure your flow is spot on or you'll have to sand the handles to get the blade to not…

5-Hole HSW Fastener

A custom 5-hole fastener that I made to mount my borders to my honeycomb storage wall. Uses the same countersunk hole as the original fasteners, just 5 hexes instead of just 4.

Fasteners - Threaded Rods - Fully Threaded

The complete set of Stemfie3D threaded rods. get.stemfie.org x.com/stemfie3d

Jibbitz Fastener

after losing many, many croc jibbitz, i decided to fix the issue just pop this ring on the top of the part of the jibbit that goes in the croc hole that's confusing… you'll figure it out ;) also it only took me like 7 min to print with a…

Sunlu E2 2, 2.5 & 3 KG spool holder and roller system - 100% Printable - No fasteners

Please heart and download if you like this model, it helps me put time into creating more useful items! V5.1 update - added cutout for center filament guide NOTE: This must be printed ABS, ASA or better temperature and creep resistant…

Quick 1/4 Tubing clip, Coax, 4 gauge wire mount, hidden fastener

Installing RO systems and needed some clips to have a bag of to hold down wires and ¼ tubing. Nothing I found had the fastner hidden and an easy way to remove the clipped wire/tube without removing the screw. After a few changes the…

Zipper - Zip Fastener - Zipper Pull - Reisverschlussschieber - Reisverschlussschlitten - Reisverschlusszipper

Der Reißverschluss ist ein unentbehrliches Zubehör für Bekleidung, Taschen und andere Gegenstände. Diese Zughilfe aus PLA bewegt den Öffnungs- und Schließmechanismus des Reißverschlusses. Ein qualitativ hochwertiger Zipper zeichnet sich…

Remix - Reversed Screw Belt Fastener for The 100 (Easier to print)

Modified the model to make printing easier - no support required Works best at 0.2mm layer height.

Nut & bolt fastener upgrades: wing nuts, thumb screws, etc

These are fastener adapters. Use them for prototyping before buying specialized fasteners or use them permanently! The models are sized for a SAE ¼ inch - 20 threads per inch nut and bolt (¼-20). This leads to a 7/16 inch regular hexagon.…

Fastener for bags, handbags, backpacks etc. - "secure" version

My sister likes to sew and often bags. Once she saw a lock that she and my niece would have liked. She wasn't able to take a picture but she gave me a rough sketch - to be honest two lines each representing one perspective. I detail this…

GT2 6 mm timing belt repair or fastener/bond (close loop) for reusing 2 old/defect belt as one on y-axis

Vor- und Nachteile auf einen Blick: + verbindung oder verlängerung von GT2 6 mm Zahnriemen + schmarl/klein/minimalistisch + Druckerfreundlich (Überhänge >55°, keine Brücken, etc.) + wiederverwendung von defekten Zahnriemen Einkaufsliste:…

Reversed Screw Belt Fastener for The 100

NOTE: There's a remix of this model by Habag111 that allows the M3 nut cutout to be printed without support. Please check it out here The original belt fastener gave me 2 problems: Not a lot of clearance between the bearing stack and the…

AirTag Rugged Keychain w/hidden fasteners on one side

Designed to hide fasteners on one side and hold them in place when turning screws. Requires pausing the print job to insert M3 nuts (for my set up, this was at layer 24) for the file named 'bottom' Tree style support breaks away easily…

Adjustable Bungee Cord Fastener

Works best with a bungee cord approximately 8 mm in diameter, of any length. One end must be crimped to itself or otherwise need something to make it a fixed end. Extremely useful for tying stuff down. Can be much better than the standard…

L-Track Stud airline rail fastener

Printable airline rail fastening systems. Two versions available: Fully printable (M10 standard screw thread) With insertion of an M5 steel screw and 2 nuts no support needed

Fastener for Igus Chain on VCore3

This is an fastener for the Igus chain Series 05 inner width 16mm: https://www.igus.de/iPro/iPro_01_0002_0001_DEde.htm?ArtNr=05.16.038.0 I built it for my RatRig V Core 3 printer where I am using the above chain to carry the bed cables.…

Thumbscrew Cap for M6 Machine Screw (Battery Cover Fastener for Audi TT MK1)

Quick simple print, works great. Came out much better than expected on a Prusa MK3. Printed with no supports. I ended up using PET and ABS because I wanted to use this print in an automotive application. Assembly notes: First screw the…

Small Fastener Organizer

In the process of assembling the CORE One Kit, I needed a good organizer for all the screws to prevent from needing to look in each of the small bags each time. Instead of printing a specific tray and throwing it away, I modified…

Ryobi nail gun (P320) fastener

Fastener for Ryobi P320 nail gun and p360 crown stapler

Prusa Core One Door Hook Fastener (M3nS nut)

Print 2pcs inserts with settings PETG Z=0,2 Print orientation: For mounting inserts you need Alien key 2mm M3x12bT countersunk screw (2x) (Found in Prusa Core One kit leftovers) M3nS nut (2x) (Found in Prusa Core One kit leftovers) Join…

Fastener - suitable for IKEA Samla box 45 liter

The fastener is suitable for an IKEA Samla box with 45 liter and can be used with or without a sealing. If used for a filament box: For the sealing I recommend to use a foam rubber which is bonded to the box. The thickness of the pressed…

Car Lift Scale 1/18 No fasteners needed.

!!!!! fixed leg size Scale 1/18 No fasteners needed, for 2 cars *You could add a led strip to illuminate the car underneath