136 modeli
Design Picking up Ikea Lack's proportion the design is a simple cube with rounded corners, accommodating either a squash ball (if you go for this option go for the softest grade of squash ball available) or printed TPU sphere as dampening…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I built the "Stomp Rocket Launcher from Sabre Design https://www.printables.com/model/666300-starship-stomp-rocket-launcher-spacex/comments/2102472 My grandchildren had a lot of fun with it. I had to reprint several rockets, because they…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recreate the spaceX starship launch with this desk stomp rocket. With a good push I have managed to get the rocket up to 3 meters, how high can you go? ;) All parts printed in Bambu Basic PLA, when using different filament the tolerances…
Take your rocket to new heights This remix of the Desktop Whomp Rocket by LoboCNC makes use of a redesigned base and some bellows that you will print in TPU. This not only allows for fist pounding, foot stomping action but can actually…
Merry X-Mas 2022 and Happy New Year 2023!!! Note: This is fan-art, completely built from scratch by myself, polygon by polygon. This is something I've wanted to do a long, LONG time (but not in a galaxy far, far away). Finally made it,…
After printing Lobocnc's awesome Desktop Stomp Rocket I found that the plunger likes to slide down on its own inside the launcher (damn you, gravity!) so I conjured up a quick spring. I only made one full circle which should be printed on…
This is a remix of Desktop Stomp Rocket & Glider - Angled Launcher by LoboCNC [https://www.thingiverse.com/thing:5228007]. I made this in OpenSCAD for easy customization. This prints well on a Prusa Mini. If the tolerance is too loose /…
Simple stand, press fit the octagonal bar between the 2 halves. Printed with no supports.
Print solid or with a lot of infill/perimeters. I printed in PLA, works really well. Attach with 3M VHB tape
There are a number of Stompa proxies out there but none of them had that 2nd Edition vibe, so I designed my own. It's very similar to the original but not an exact copy. Many thanks to reddit user Marcus_Machiavelli for measurements from…
This is a rocket designed to be strong and compatible with Stomp Rocket launchers. For more information see this page: http://www.adamthole.com/3d-printable-stomp-rocket/ Print Settings Printer: Ultibots D300VS Rafts: Doesn't Matter…
STOMP on the launcher to send the rocket soaring into the air! When tested on my high ceilings it reached the top which is about 12 ft. Please do not shoot this at anyone.
Some adapters you can print to mount your Flight Fender to your Fungineers Stompies
Print fenders in ABS or PETG with 100% infill. Foot hooks, AirTag cover, and mud flap should be printed in TPU. Mount the foot hooks to the fender using M5 screws and nuts. Nuts should slot into the cutouts on the back of the fenders.
Line 6 HX Stomp Mini Tap Tempo with Expression Out Guitar Pedal: I made this pedal to clean up my HX Stomp setup. One jack connects to the HX Stomp Exp1/2 Jack with a stereo cable and the other jack connects to an expression pedal with a…
This is a generic enclosure for a guitar effects pedal with top mounted jacks. The enclosure has space for 3 potentiometers and a power LED. I have also included a blank version that you can customize for yourself.
Développé sur : Bambu lab X1 carbon - ABS - hauteur de couche 0.2mm
Similar to our all of our stomp pads! This was part of a custom order from Manuela from Etsy, thanks for the great idea! This model uses the same tried and tested (and very sharp!) pyramids to bite into your boots and provide unparalleled…
Fungineers Stompies front footpad for modeling reference, provided to me by Fungineers. Thank you, Fungineers!
Beefed up Starship for a bit longer life against ceiling, a bit heavier and doesn't fly as high. Tendency to fly sideways like the real Starship. The simple rocket is lighter and quickly printed especially in vase mode, considered a…
This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad Created because the Stompies Footpad was a different profile than I expected, and had a 3d printer to fix that. Uploading here since…
Guitar Stompbox housing with thread. Uniwersal case for DIY effects making. Use: 1x M4x60 bolt to assemble up with bottom. 2x d=5mm 1mm magnets (BOTTOM) 2x d=5mm 3mm magnets (TOP)
A Stomping Foot. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Inspired by LoboCNC (on thingiverse) This download contains all the files required to print your very own Epic Stomp Rocket. It comes with a few different cup decorations to choose from including "JBV Creative", "To The Moon", and "Rocket…
Be afeared, tis Ogphart Bonebiter, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy…
I printed in TPU, no supports required. PLA or PETG would work fine also but my be brittle.
This is my 45° angled version of the launcher. It also has a bit smaller tolerances if you use the original plunger from the source object by LoboCNC: https://www.thingiverse.com/thing:5214201 (EDIT: THIS WAS DELETED BY THINGIVERSE; IT…
Behold, Tharrak the Enthused, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy resin…
This is a variation on the Stomp Rocket Rocket - a solid model to print in vase mode (plus a Ender-3-compatible .gcode to do so). Printed in TPU95A, the GCode incorporates a "tweak" to make a solid top on an otherwise vase mode print…
Stargate themed stomp pad for snowboard. Used for boot out of strap so it dows not slip from snowboard. Print with at least 5 perimeters. Material PLA should be just fine but suggest you to use more durable materials as ABS, ASA. Use…
Elevate your ride with our herb-inspired snowboard stomp pad! Designed for riders who appreciate both style and substance on the slopes. 🏂 Key Features: • Eye-catching cannabis leaf design • Ultra-sharp 3D printed texture for superior…
Chair Lifts aren't scary (anymore)! Represent your cat! This is a LARGE (around 6") stomp pad with very sharp peaks that'll you skate like nothing else. Don‘t have a printer? Check out my Etsy Shop or buy it from me directly ! Tips: Print…
This is a cap for standard guitar pedal switches. Fits many, but not all brands. Print instructions Category: Music Print Settings Printer: Monoprice Mini v1 Rafts: Yes Supports: No Resolution: .0875mm Infill: 10% Notes: Make sure to lay…
Skull and bones stomp pad. 183x150x10mm dimensions. Main body is 5mm high, nubs are an additional 5mm high off the base. Print out of PETG with 100% infill for best results.
I was looking for a stand for my Ampero 2 Stomp and couldn't find one anywhere so I made it. I don't think it will print very well on the side, so I suggest printing it as it stands on the desk - that gives a nice, large adhesion area.
I got sick of pliers slipping, or needing to find specific spanners or sockets while assembling and working on stompboxes/guitar effects. I created this set of the sizes I commonly needed: 10mm - potentiometer nuts 11mm - ¼" jack with…
A small stand for your Line6 HX Stomp XL. It lifts the effectboard 3 cm on the back for a precise foot-switch-orgy. If you want, you can get yourself some anti-slippery-sticker with 10mm on the ground, the shapes for that a there… Print…
Just a simple funnel for a dry herb vaporizer with a build in stomper. It's designed fot the Yocan Hit but maybe it will fit others, too.
Hi! Are you also tired of putting Velcro under your favorite pedals because it damages the paint, leaves glue, or simply because you change them often? Then here's the solution! Racks in standard 1590A/B/BB and 125B formats, which you…
Large button for add to the standard foot switch of guitar pedal Print Settings Printer: Flsun Q5 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: any pla any Category: Music
So I've seen the standard stomp rocket, but decided to try and make my own with Blender. I ended up adding a few things such as turning it 45 degrees and trying to make it glide which sadly didn't work well. If you want to see everything…
I made this simple model in tinkercad as the action figure would like to topple over. It is not a well balance action figure, but this figure stand/base helps a lot. It has not fallen over once since I designed and printed it out. I was…
Druzzag Axebringer, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy resin printing 🎯…
This model is printed in 4 pieces and the Plunger is designed to work with flexible filaments. There are 4 files to print: the Plunger, Base, and Nozzle, and Rocket. The Plunger HAS to be printed in flexible filament (I used Flexible PLA…
Enhance your snowboard with this unique 3D printed Amanita muscaria stomp pad! Don‘t have a printer? Check out my Etsy Shop or buy it from me directly ! Designed for both style and function, it provides superior grip for better board…
Batman Snowboard Stomp Pad. The Prusa 3D viewer shows the part as just an oval with nubs, but the Batman symbol is there. Base height is 4mm. Nub height is 5mm for a total height of 9mm. An alternate version with has been uploaded which…
Make lil kitty paws in your zen garden :)
Similar to our Cat Paw Stomp Pad! This model uses the same tried and tested (and very sharp!) pyramids to bite into your boots and provide unparalleled stability while skating Don‘t have a printer? Check out my Etsy Shop or buy it from me…
Recommended print settings for base and cup: Layer Height: 0.2mm Nozzle: 0.4mm Infill: 100% Supports: No Speed: 200% (for saving time and smoother surfaces) Approx. 5h print time for the cup, and 8h - for the base Recommended print…
Welcome to my first published project, The Stompa. This is a Mega Gryphon that uses a cheap solenoid from Amazon. I decided to move away from using a neutron because it did not have a long enough throw. This solenoid is cheaper and has a…
Adapter from PCO28-2810 bottle cap to 1/2 PVC outer diameter (0.84") for use with e.g. stomp rockets . I found a couple of other models but ended up remixing one of steffanders lovely thread models to exactly what I wanted. This model is…
Includes a ready-to-print 3MF file which contains front and rear pubgrip ready to print. Also contains some DXF files with outlines, if you'd like to use those together with…
If you like it buy me a coffee! https://ko-fi.com/ilrost A stomp box measuring 120x65x35 suitable for hosting 50x50 PCBs a practical door to access the battery it was designed to accommodate a LED case let me know if you want changes,…
In case you have an auto bed levelling (like BL Touch) in place the springs on the levelling screws can be replaced with this tubes in order to firmly attach the print bed to carriage since the springs and screws are no longer required to…
I put these kit cards together as gifts for my gaming group at one point or another, as we piloted these mechs in a campaign. I have most of the Unseen, but these are the only ones in kit card frames. Ill get around to putting the others…
Snowboard Stomp pad based on some art my friend drew. Lets get kraken! I used ABS and it's lasted years. PETG should also work
Updated CAD below. An extended lower designed to allow a TFL drop top fender (XR(C)/GT) to fit on an X10 rail system with Stompie footpads. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the…
A close out is required when using the Fungineers Stompies footpads on a standard Onewheel XR. This closeout is compatible with standard rails and fenders. There's also a variant that includes an LED status light holder. Details on how to…
I found the original all-in-one stomp-rocket launchpad to be a little challenging to sand smooth. In addition as the printhead moved between the towers a line was left on the towers. This variation uses threaded parts to allow you to…
MIDI controller for guitar effect software. I am using it with ToneLib GFX on old Windows tablet. USB connection. It has 10 (effective 20) switches, switch 11 serves as “shift”. Switches fi7mm are used, if you have bigger ones, just drill…
Disclaimer: I ended up not printing it because I found a different solution to what I had planned. I attached the Fusion file with all the parameters so you can edit it to your needs. I am certain the dimensions are correct. I would be…
These legs are a little bit sturdier than the original, and the round foot means that the legs don't all have to be in the same position for the rocket launcher to sit flat – great for launching on hills or uneven ground! Printed in…
Modified the rear to match a front (stock) stompy. The exception being wire channel distance, which has been repositioned to allow the use of exile or nexus sensors. I print in PETG, 75% infill, and print the lense in clear PETG, 100%…
I wanted a stomp pad but didn't like any of the ones I found so I made my own. I'm printing with Inland TPU. Attached with ultra thin and sticky double sided tape. Been using it ever since. Works great! Remixed from: CSGO Headshot logo by…
"You say that money isn't everything But I'd like to see you live without it" Been a fan for a long time. Had to represent the boys. Example printed with 15% infill. If you’d like to shoot some spare change or a dollar my way, you can…
Design We love gyroid infill, not only for its properties but also because it is so nice, almost a meditation, to sit and watch it printing (and honestly, haven't you done that?). So why not show this mesmerizing structure and make use of…
Updated CAD below. A fender delete designed for Fungineers x7 boards using stompies. Curved because life's too edgy these days. Use 4x countersunk M5x14mm and 4x countersunk M5x10mm for securing to the X10 rails. 10mm for the inner bolts…
SpaceX stop pad for a snowboard
Anti Vibration Feet for the Creality CR-10's... Using 4 squash balls (2 yellow dot, available at amazon and others) and the original screws for fitting to the frame... Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No…
Snug fit pedal holders for the following guitar and bass pedals: Caline Pure Sky (and similar) Flamma FC-xx mini Irin mini Joyo JF-xx Lekato mini Mosky mini (Golden Horse, …) and regular (Roller, …) M-VAVE digital pedals (Elemental, Mini…
quick file to mimic stompshield, protects potentiometer heads from moving around when stored in bags or handled in transport and such (a.k.a. saves your analog pedal settings) of course quite girthy in comparison to the original…
MIDI Stomping Pads Demo: https://youtu.be/UCAvpVPfscM Learn Guide: https://learn.adafruit.com/midi-stomping-pads Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 10 Filament: Matter…
Daniel Ricciardo stomp pad. Approx measurements are 161x92x6.5mm. I did a color change at 4mm to switch from orange to blue to give the overlay look and define the #3 better. The stomp pad itself has traction from the lines in the 3, and…
Had a problem on stage….. Needed to swap between Guitar and banjo, And also needed to swap line out and the tuner. Made this box and wired a double passthrough stomp switch. I also added a slot for a 9v battery tray so I could use a live…
Updated CAD below. A fender delete designed for Fungineers X7 boards using stompies. Use 4x countersunk M5x14mm and 4x countersunk M5x18mm for securing to the X7 rails. 18mm for the inner bolts towards the wheel well and 14mm for the…
An extended lower designed to allow a TFL drop top fender (XR(C)/GT) to fit on an X10 rail system with Stompie footpads. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the inner bolts towards…
Support my small business! Purchased printed stomp pads here! → Crafted Carving Keep Your Ride Fresh with Our Aloe-Inspired Snowboard Stomp Pad! Designed for riders who appreciate both function and style, this stomp pad brings a natural…
A Basic Printable Schaper stomper Wheel. This is a work in progress. I tried to design this to be printable on most 3D printers. Most use a 0.4 nozzle. This size is difficult for small parts with tight tolerances. Please print only one at…
Print ideally using TPU, 100% infill. Other materials works as well. I used Hot glue and Heat gun to fix pad on snowboard.
A fender delete designed for Fungineers x7 boards using stompies. Curved because life's too edgy these days. Use 4x countersunk M5x14mm and 4x countersunk M5x10mm for securing to the X10 rails. 10mm for the inner bolts towards the wheel…
Updated CAD below. A fender delete designed for Fungineers X10 boards using stompies. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the inner bolts towards the wheel well and 14mm for the…
Adjustable spool holder for the CR-10 (S...), needs four roller bearings type 608, for top mount on the control unit. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Doesn't Matter Resolution: 0.15 Infill: 15%…
Hey! Since a lott off people loved the double screen i made with the circuit board i remixed the original one to with a circuit board on it. Let me know what you think about them! If you add this to your collection and/or download the…
G3 Zed Stomp Pad - Standard Size This file is to allow you to use your G3 Zed bindings without the use of a brake. G3 calls this kit the “Stomp Pad”. While not expensive, it can be hard to hard to find in stock, and is pretty easy to…
Stop slipping off while exiting chairlifts and looking like a doofus. Also helps prevent unnecessary injuries that often happen at chairlifts. Secure with 3M VHB tape that resistant to cold and suitable for “outdoor” use. I used 3 of…
There's a variety of stomp rocket launchers to be found, most unaltered models do tend to have the same base diameter - here are two bellows variations fitting “both” common variations - 38mm and 51mm (approx, for reference). Print in TPU…
Hotone Ampero 2 Stomp box with 1 input and XLR stereo out. Printable withoust support I used two stereo jack to XLR adapter cables(30cm) and an input jack from Thomann. I also used a right angle adapter IEC C14 Male Plug to C5 from…
Use 3M VHB tape to secure it to your board!
A fender delete designed for Fungineers X7 boards using stompies. Use 4x countersunk M5x14mm and 4x countersunk M5x18mm for securing to the X7 rails. 18mm for the inner bolts towards the wheel well and 14mm for the bolts that go through…
This is a heat bed cable management design for the Creality CR-10 series Besides the tension release on both ends of the cable it uses a standard spiral cable sleeve (available on amazon and others) to protect the heat bed cabling from…
A tribute piece to the late Suicide Silence Vocalist Mitch Luker
A little on the large side, maybe, but it gives more room for prototyping. Feel free to remix and resize as needed. Holes are sized for 3x 6mm mini-pot control knobs, 1x 12mm stompbox bypass switch, 2x 11mm input/output jacks. Print with…
made myself a stomp pad for my snowboard
Print plungers with words facing down. Do not re-scale anything or the clearances will be messed up.
I made the stompin whomp rocket recently and my kids loved it but wanted more rockets. I made this clip so that you can easily store the extras nearby. I printed this in PLA on a Kingroon KLP1 @ 0.12mm layer height with no supports. You…
Here is my battery-pack dummy for the "Simplon Stomp". I designed it so that the battery can be removed when the bike is being transported on a bike rack, while also protecting the contacts of the power system. The dummy consists of two…
100x160mm sign, celebrating Weasel Stomping Day. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the Shadowbox Frames ,…
Mirror from the decrepit blue site. May remix at some point to add holes for power cable, but here's the original for now. frogstompr's Description: Skiff box to convert the Synthrotek Nandamonium eurorack module to console. Also works as…
