434 modeli
If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Get ready to meet your new best friend for soldering LED strips and/or wires! I had to find a suitable sidekick for my upcoming soldering marathon, so I printed and tested two models that seemed promising. But alas, they were too…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The winding Möbius strip is a very good example of a shape that does not have a single flat surface. As such it is the nightmare of any 3D maker as it requires support along the entire model. But what makes the Möbius strip annoying also…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a shelf I designed to be mounted to the wall with 4 small adhesive strips. This print is great for places where you need to add a shelf, but can't necessarily drill into the wall, like dorms, campus housing, rentals, etc. Some…
Wydruk około 13,13 €–16,05 € nettoWstępna wycena jednego wariantu
Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.
Wydruk około 0,77 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pen holder for wall mounting with power strips. Extra space to detach. For 4 pens. We use it to label our annual calendar.Size for original power strips. For loosening from below with needle-nosed pliers, for example.
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
Description This is a remix of G.wrks Spare steel sheet holder wall mount (thanks a lot!). It removes the screw holes for mounting with adhesive strips. It also adds wedges at the back that make the strip ends accessible after mounting. I…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Ein Regal, das mit einem Powerstrip Large (2 kg Tragkraft) an die Rückwand eines Schrankes geklebt wird. Die Lasche des Strips steht über, sodass er sich einfach wieder entfernen lässt (siehe Foto). Die Abmessungen der Ablagen betragen…
Wydruk około 14,52 €–17,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht. Das einfache Schutzgehäuse…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from…
This device can cut plastic bottles into strips of 7 and 11mm for 3D filament.
This wall mount was designed around three main criteria: Completely hide a large 3M strip Allow the user to use the camera and home button even with a case that accommodates the apple pencil Allow the print to be made without supports I…
Inspired by MihaiDesigns, I wanted to create a quick color purge test that didn't involve generating a lot of programatic G-Code. My testing strips are designed to print the starting color then switch filaments and resume printing with…
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
These are USB cable organizers designed to be wall mounted, either using #8 screws, 3M Command Strips or double sided tape. The 6 place cable holder has 4 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings). The…
Have you ever had an issue with RGB strips falling off the back of your TV? Well, so have I. I was also very unhappy with how it bounced off the back of the wall and the lack of even glow around the TV. So, rather than spend an extra…
Overview These label strips provide a place to attach a standard 12mm label (e.g. Brother label maker) to take your Packout organization game to the next level. Features Readable when the lid is open or closed Don't get in the road -…
Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…
Wall hook/hanger with a recess on the back fitting small size Power Strips 14*32mm.
A quick clip to hold your LED light strips. These are for the type that come on spools, snug for 8mm wide ones. I made 2, one is smaller designed for double sided tape and the other has counter sunk holes to fit 4mm screws. I made this…
Clip for Philips Hue LED Lightstrips with hole for countersunk screw.
This LED strip clip should work for all 12mm width LED strips. I personally used and tested it for a WS2812b and it worked just fine. If you test other types and they work, please let me know in the comment section so i can add them as…
a clone of the original wall hangers from tessa but in a 3d print friendly design.
Designed to be printed on narrow side for strength! This makes hanging picture, photo, or poster frames with toothed hangers on the back incredibly simple. Pictured is version 1. Version 2, the STL version I've shared, slightly lengthens…
Vine Leafy hook for Command Strips Use it to help support vines climb the wall or hanging decor.
This is USB cable organizer meant to be wall mounted. There are 3 versions which have different wall mounting options: The first is plain, and can be mounted with double sided tape. The 2nd design is for use with 3M command strips , it…
Attach your Ikea Skadis to walls or furniture without having to drill holes. You can use Tesa Powerstrips tape or any kind of alternative adhesive tape for the same purpose. Warning! Please use the appropriate tape and for the appropriate…
Surface with only one side! https://en.wikipedia.org/wiki/M%C3%B6bius_strip Challange is the print orientation and the needed support to minimize the negative impact of the touch points of the support. My best experience (not as nice as I…
I hang hats, clothes, and equipment. I love these hooks. Resize in your slicer, as needed! Dimensions for the back of the hook are 55mm long and 17mm wide. I also have a model with a hole if you need extra strength!
There are three sizes: small, medium, large and extra large. Small albums (left small, right small), medium albums (left medium, right small | left medium, right medium) or large albums (left large, right medium | left large, right…
350mm and 300mm Hex light for 10mm led strip. there is a channel to hide the wires from both the top and the bottom. There is a lot of soldering required. I also used a soldering iron to melt and hid the seams after everything was…
I created this to help with the Tacoing of the SV08 bed. Some of the Sovol SV08 beds center along the Y axis is lower than the left and right side on the Y axis. This causes the Taco effect. I made 320mm x 25mm x 1mm strips that when…
Hooks for 3M Command Strips (Medium) that can hold up to 1.3 KG.
These inserts are designed to fit in standard laboratory freezer boxes and should fit most 0.2 mL PCR tubes and PCR tube strips. The upper rack stacks on top of the lower rack with a little extra clearance for any PCR tubes already on the…
ENG Attention: Not a genuine Philips component! You want the light strip to shine on the ceiling? No problem with this wall bracket. Simply screw it to the wall and clamp the Hue Light Strip in place. With several clamps, arches can also…
I made a bracket to attach a led strip (e.g. https://www.amazon.de/gp/product/B08VJ65WSV ) to 3030 aluminum extrusions, in a 45° angle. It just snaps onto the extrusion. The model is only 20mm long, just scale it to the length you need.…
Print the model on the side with supports for optimal result and strength.
specifically made for a 350mm voron 2.4 but i dont see why it wouldnt work on any other printer. i just used 30 led per meter ws2812b neopixels i got off aliexpress and they work great assembly is straight forward but i do reccomend using…
This is a simple battery holder for a battery pack. 3S = 3 batteries in series giving 12v, 6P = 6 batteries in parallel, increasing the storage capacity. If the battery box could hold more I would've gone with an 8P. I'm converting my 12v…
Extensions for adding LED strips on top of this hydroponic tower by boundarycondition https://www.thingiverse.com/thing:3405964 Just print the parts and put it on top of tower. The LED strips are sticked to the aluminium strip . You will…
Looking for a system to display my diecast collection. Found the IKEA Skadis boards and found this was more useful than the honeycomb system I have seen here. Plus it looks better than normal pegboards. So I bought some real IKEA Skadis…
Recommended Printing Parameters Material: PLA or PETG Layer Height: 0.20 mm Quality Infill: 15% Supports: None Brim: None
Thanks for the original model goes to @SickSadWorld_260233 This printed well for me in PETG at .20mm and 25% infill.
yet another LED strip holder. This time with a clip in design for 10mm strips with rubber cover IPx protection. ...I didn't want to use the sticky tape of the strip itself, therefore I did a clip in design. the 20mm for the ticky tape is…
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
My own take on a slim case and cutting template for fuschr's excellent sanding sticks . The case holds ten sanding sticks, and has space for spare strips of sandpaper and a cutting template. It's designed to tuck into a shallow drawer or…
Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year!
BOM: Printed with ROSA3D High Speed PLA Dark Blue Build professional custom Lithium-Ion battery packs with these precision spacers. This set focuses on linear strips (1 cell wide) ranging from 2 to 7 cells in length. Smart Octagonal…
I removed the holes from this awesome bike helmet hook so it can be used with command strips or double-sided tape. If you print in the orientation provided (horns-up) it does not require supports; other orientations may require supports.…
Remote Control Holder (Wall Mountable) Designed for use with the popular little card type remote control, As supplied with a lot of LED Lights and Light Strips I was certain I was going to loose my remote, so I made this holder to mount…
Find all detailed instructions, the Bill of Materials (BOM), electronic schematics, and PCB files at the following link: ecodecat3d/RePET: 3D Printing with Plastic Bottles (github.com) . RePET is a groundbreaking system designed for 3D…
This version of the Z42 Prusa Mini light mount is an evolution of the original and is designed to hold a LED light strip. You can wire your own or you can purchase a sewing machine light kit (USB, no soldering involved), install it and…
This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB. My objective was to have a neat, all-in-one enclosure for all I need to run the excellent WLED "Neopixel" addressable LED…
I designed these PCB Holders and Feeder Strips to clip to the edge of the build plate on the Lumen PNP using 0.75" binder clips. This design allows for both the feeder and the PCB to be mounted anywhere on the build plate. It is only…
I have seen a few Command strip mounts, but I did not like how far away from the wall it put the honeycomb frame causing it to flex. I also wanted a way to secure it to the honeycomb frame. There are two mounts for the Medium size command…
In our genetics lab, we have a couple of small and simple centrifuges only to spin down PCR strips and tubes to remove droplets of liquid from the wall and cap of the tubes. When one of these broke, I realized how expensive these…
My last hook worked fine until I put by work bag on it. Weighed about 10# and it ripped it right off. So I added some length and some girth, made the hook a bit more aesthetically pleasing and it holds up my bag just fine.
A funcsigned Bottle Cutter made in TinkerCad that makes 8 mm strips from PET bottles. If you like it or even make one please post it, like, share, and consider a Paypal donation . Thank you! BOM 3 pcs. washers 14-14.5 x 1 mm 1 pcs.…
Be careful it needs proper supports to print, both in resin and fdm. These are two mobius strip parts but locked, not possible to print seperate, it has to be done in one go.
Long time ago I have modelled this small hook for hanging small things at places where I can use the Tesa power strips. I used them frequently in my home. print this in any favourable colour or material like PLA or PETG
Door catch & stopper / window holder with firm fit and good grip to hold the door or window open. It is easy to attach because both sides match the size of a Tesa Powerstrip: one for the window frame and one for the wall or skirting…
This is a remix of Livingroom Workbench 's design for an IKEA ALFTA. I made some changes to the model to make it better compatible with Tesa powerstrips, which are a bit smaller than IKEA strips. The model comes in two versions: The…
This is a holder for an Amazon Fire Stick Remote. The design was inspired by CRSC's version here ( https://www.thingiverse.com/thing:4689662 ), though I was unable to use that model to remix from and just redesigned it from scratch. The…
This is a hook for 3M Command adhesive strips. If you’re like me you have some extra strips laying around, I have a bag of extra strips. The backing is 75mm x 20mm. I used the large strips, the medium strips are the same width but…
Need to start your garden from seed indoors or provide lighting for your DIY hydroponics? This modular LED light strip system can be customized for your growing needs. Print file includes: 24cm LED strip (8mm) holders with end adapter,…
I designed an all-in 3D printed table saw throat insert. It features changeable dovetailed zero clearance strips that are easy to make from 1/4″ birch plywood. The insert allows full range of movement of blade and splitter (height and…
This skateboard deck display mount Uses M5 hex nuts that should be heat pressed in for longevity Mount using 25mm M5 screws (or up to 50mm) to thread into the model for additional support Recessed slot on back for a flush wall mounting…
To switch between the 7 mm or 11 mm widths, simply rotate the blade holder. My print settings: Printer: Neptune 4 Pro Layer height: 0.16 mm Nozzle: 0.4 mm Infill: 15% Speed: 150 mm/s Supports: Only in the larger hole Filament: I used PLA…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Inspired by the Triple G Workshop 's Cube Background Panels…
This is a simple remix of guppyk's 5.00mm starter strips . I duplicated the model and combined them back-to-back so that the cells are on both sides of the strip. The extra thickness allows these to be printed standing up. These slipped…
I needed a couple of shelves to store stuff in my bathroom so I created these quick shelves. For more information on how to use command strips to install this shelf, please see:…
Since my baseball cap collection was getting bigger and unattractively stacked on the shelf, I was looking for a holder for the caps. Since I didn't like the holders I could find - only a hook on which the cap then starts sagging or the…
This is a temporary child safety lock that provides a more difficult locking solution, but provides the flexibility to leave open if desired. Print instructions The buckle should be printed vertically (on end) and then the other two parts…
Adaptation of the original model to allow using led strips with 60 led/m instead of 30
This is a Remix of my USB cable organizer meant to be wall mounted. This version is designed for thinner USB cables, with holes that are 4mm wide (the original model has 5mm holes). Similar to the original models, this one also has…
These screw clips have a multitude of uses but I specifically designed them for permanent installation of Govee permanent outdoor lights. The lights come with adhesive pads claiming to be 3M VHB but the adhesive was not strong enough for…
I wanted to show off some nostalgic pro boards but didn't want to put a hole in the wall or spend $40 per board on commercial options. I designed this wall mount to use 3M strips and hold new and old-school decks. Hardware * M5 5.8x7.1mm…
Tame That Under-Desk Mess This simple cable organizer can be affixed under a desk or table using small-sized 3M Command Strips. Print as many or as few as you need, and organize your cables without screws or damaging adhesive. Prints…
Pretty straight forward. Fits on 230x230mm beds.
Please use the mirror feature of your slicer to create the second part.
Update: Added even lower profile version Update 2: Added a version for 2 Power Strips with a stronger hook
V2 Has been uploaded! After using this case on some recent travel, I decided to add a dip for grabbing the application magnet post and the strip as well. V1 will still remain, because people need choices. The travel case that Intake sells…
Modified AmicoJeko's model to thicken the base slightly to fit command velcro strips rather than the standard strips that would leave an exposed pull tab. The velcro ones can be completely invisible. The strips I used are 20mm wide and…
The clip comes with a segmented STL file so you can lengthen individual elements like the channel and the gap. Something I wanted to get out of this was a countersunk screw hole for a flat head screw, which was easy enough. I rounded the…
Update: 12/22/25: I have updated the files to be easier to design in and with. The gauge is better on tight curves now as well. HOn30 tie strips with uniform ties and wood grain texture. To be used with code 55 rail. When laying the rail…
A printable protector for your vehicle, so you can safely lean skis and snowboards against it. Requires 10x4x2 rectangular neodymium magnets (6 per print, and the prints lock together as a pair, so 12 magnets per completed unit). Note:…
A simple, small 1x1x6 bin to hold up to 6 Arduino Nanos and their pin strips in one handy little place. Took only a few seconds to create using my Parametric Gridfinity Template for FreeCAD .
I wanted to add lighting to my slot car track, but since I often use the track for club racing where crashed cars are grabbed up and put back on as quickly as possible, having a bunch of light poles around the track would just be in the…
Collection of wedges to alter the mounting angle of trucks. In this way, trucks can be made more agile or stable and adapted to the individual riding style. Features: - Angles from 1° to 20° with 1° increments, also 1.5° and 2.5° included…
I started recently printing RC planes, and quickly need a way to store them. As a renter, drilling into the ceiling is not a great option, so I designed these to use command strips. I also used a bit of weather-stripping to pad them.…
There are AMS and non AMS .3mf files. Best opened in Bambustudio or Orcaslicer. For the non AMS/MMS Version you have to add a pause at layer 11 (2,2mm) to swap filaments. Boxes are stackable so you only need one cover per stack, not per…
Sand the face on which the tesa powerstrip goes for better adhesion
This bracket is designed to allow a nest temperature sensor to be seamlessly mounted to a wall with a “Mini” 3M Command Strip, while still being easy to remove the sensor for battery changes. Very useful for when you can't, or don't want…
Print the hooks at 40% or more infill and with supports. Included theres a blank key hook so you can put annother brands logo or no logo at all.
Remixed from the original design by @oleksii_817342, Wall mount for an Ikea TIMMERFLOTTE Temperature sensor designed to be mounted with a trimmed down Command strip. I recommend printing with supports for the overhang caused by the cut…
