Wyniki wyszukiwania: ttgo

Sortowanie

123 modeli

P
Printableskamkalian

TTGO T-Beam GPS LoRaWAN Tracker Case/Housing

Build your own GPS LoRaWAN Tracker. This housing is handy and suitable for the TTGO T-Beam Board (rev0.9 and rev1.0) Choose a top and a body from the matching parts for your board version. Depending on the placement of the antenna choose…

Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
78
Polubienia
19
Ocena
0
P
PrintablesTonyG

TTGO LoRa32 v2.1.1.6 *and* T3S3 cases for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Pobrania
5034
Polubienia
360
Ocena
4,81
P
Printablesantirez

Case for LILYGO LoRa TTGO T3 v1.6 case

That's a case for the famous LILYGO T3 LoRa device, with room for a standard 3.6v LiPo battery. No screws needed, you can just print it and close it with the device inside. No supports required. PETG is better but PLA also works well.

Pobrania
2101
Polubienia
124
Ocena
4,83
P
Printablesunlimitedbacon

Meshtastic TTGO T-Beam Case - SciFi

This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism. CAD on…

Pobrania
1942
Polubienia
451
Ocena
4,93
P
Printablesjeepers01

TTGO Lora32 T3 Slimline Case

TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…

Pobrania
1448
Polubienia
81
Ocena
5
P
Printablesuzer66

LilyGo TTGO T-Display Enclosure

Enclosure for the LilyGo TTGO T-Display ESP32 development board. The enclosure provides two button levers that will activate the board buttons, a port for the USB C connector, a recessed leaver for the reset button on the board. It also…

Pobrania
1311
Polubienia
85
Ocena
4,93
P
PrintablesDekkia

LILYGO TTGO T-Beam Supreme Case

Requires eight 12mm M2 self tapping screws to assemble. It's recommend to seperate the parts in your slicer. If you print it as-is they'll stick together. T-Beam_Supreme_midframe_buttons_update1.3mf contains some updates that make the…

Pobrania
1043
Polubienia
100
Ocena
5
P
Printablespancakesyrup_

TTGO T-Display Cases

Summary This enclosure is designed for the TTGO T-Display ESP32 boards with a 1.14" LCD screen. It ensures that the USB-C cable can be yank out without pulling out the board, press the buttons without fear of breakage. Includes space for…

Pobrania
1031
Polubienia
64
Ocena
5
P
PrintablesBreeki

Meshtastic TTGO T-Beam Case

This is a rugged case for your Meshtastic TTGO T-Beam device with SMA antenna plug. I printed this using Overture PETG with 4 outer walls and 25% infil with the Prusament PETG settings. Use a dab of silicon grease on the switch cover for…

Pobrania
1009
Polubienia
127
Ocena
4,78
P
PrintablesDdx30

Meshtastic Lilygo TTGO Lora

Modified Lilygo TTGO Lora case to include 1000mAh or 2000mAh batteries. In the future I'll include a place for a switch, as currently is always on, and the Meshtastic version for Lilygo TTGO Lora is not going to sleep when disconnecting…

Pobrania
686
Polubienia
78
Ocena
5
P
Printablesgeokscott

MySondy GO or Meshtastic Case TTGO / LILYGO LoRa32 V2.1_1.6 Board & 18650 Battery

If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…

Pobrania
681
Polubienia
40
Ocena
5
P
Printablesfoorschtbar

Case for TTGO T-Beam V1.1 (RDZsonde) with 2.0 TFT Display

This is a upgraded Case for the TTGO T-Team RDZSone tracker board with a 2.0 TFT Display. Print instructions Parts 1x LILYGO® TTGO T-Beam V1.1 ESP32 433 Mhz WiFi Bluetooth GPS 1x 2.0" ILI9225 SPI TFT/LCD 4x M2.5x10mm Flat Head Hex Screws…

Pobrania
595
Polubienia
23
Ocena
5
P
PrintablesFAB1150

TTGO T-Beam V1.1 case for big GPS antenna

This is a remix of tpatrickwalsh's TTGO T-beam v1.1 (and v1.0) case ( https://www.thingiverse.com/thing:4753247 ), modified to fit the bigger GPS antennas for better reception. I have found that the bigger antenna is a must, as the…

Pobrania
590
Polubienia
49
Ocena
4,8
P
PrintablesCJPrints

TTGO Lora32 T3 18650 case

Remix to allow an 18650 battery in a suitable holder to be accommodated in the back of the case

Pobrania
520
Polubienia
29
Ocena
5
P
PrintablesTheKwijibo

TTGO v2 LORA with buttons and 1.3" OLED Enclosure

Only a few enclosures for the T-Beam TTGO LORA boards out there, and I didn't find any that were designed for the larger 1.3" OLED display. Here's my version. This one allows for button and USB access. Lid snaps into place and is held…

Pobrania
479
Polubienia
29
Ocena
5
P
PrintablesEmiel

TTGO lora32 T3 v1.6.1

I was unable to find a CAD model for this specific TTGO module so I made my own. The dimensions and the placements of the components should be fairly accurate but there could be a slight difference. If you've got any questions or…

Pobrania
458
Polubienia
25
Ocena
5
P
PrintablesRobin Dorst

LILYGO TTGO T5 2.13" Case

This is a remix of the thingiverse model with more space for the battery and a few little modifications. Most of the modifications where done in PrusaSlicer and can easily be modified. I also changed the size of the holes for the magnets…

Pobrania
381
Polubienia
27
Ocena
5
P
PrintablesCyclone-6

Meshtastic Enclosure For LILYGO T-Beam ESP32 TTGO Development Board

An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…

Pobrania
351
Polubienia
30
Ocena
4
P
PrintablesValentino Hesse

Lora APRS - TTGO T-Beam Case MK2

This is a rugged case for your LORA-Aprs TTGO T-Beam device with SMA antenna plug. Thanks to Breeki for permission to remix and publish. I modified his great work and added clearance for the printed circuit board so that each version…

Pobrania
321
Polubienia
46
Ocena
5
P
Printablesideenwerk.me

TTGO/TBeam 1.1 case with loop for paracord/carabiner (and big GPS-antenna)

may be used with rdzsonde, meshtastic and others while hiking, to fix it securely to the vest/belt/backpack.

Pobrania
280
Polubienia
24
Ocena
5
P
PrintablesMario

LilyGO TTGO T-Display case

Snap-fit case for TTGO T-Display

Pobrania
260
Polubienia
13
Ocena
5
P
PrintablesWade Edwards

TTGO Lora32 T3 Slimline Case with Battery

I designed the model to be able to be printed on its back without supports. Here is a link to the battery that I used https://www.aliexpress.us/item/3256802096150819.html. You can see from the pictures that it does have the same snug fit…

Pobrania
242
Polubienia
10
Ocena
4,5
P
PrintablesJoey

TTGO T-Beam Case

Fits https://www.aliexpress.com/item/4001178678568.html Secure the lid with four M2 x 10mm machine screws Helps to print supports just to support the edges of the back of the case.

Pobrania
240
Polubienia
17
Ocena
5
P
PrintablesRambo

Lilygo TTGO LoRa32 case

simple case that fits a slim battery and some sensors you might want to have if you need to customize https://a360.co/4poeBnF (2026-01-03 fixed the link) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…

Pobrania
229
Polubienia
14
Ocena
5
P
PrintablesBGDglider

LilyGo TTGO LoRa32 Case

This is a fully 3D printable enclosure for the LilyGo TTGO LoRa32 board used in Meshtastic nodes. The enclosure provides internal space for a battery and supports the use of the board’s native antenna connector. The slide switch and reset…

Pobrania
212
Polubienia
18
Ocena
5
P
PrintablesDavid

Case for LILYGO TTGO T-Call v1.4 and antenna

Case for the LILYGO TTGO T-Call v1.4 (ESP32 + SIM800L module; see e.g. here: https://de.aliexpress.com/item/33045221960.html ) and antenna (see e.g. here: https://de.aliexpress.com/item/32474525425.html ). The hole to mount the antenna…

Pobrania
201
Polubienia
14
Ocena
0
P
PrintablesSapujapu

TTGO T-Beam: Bone Case (Meshtastic)

A small bare-bones case for your Meshtastic TTGO T-Beam device with SMA antenna plug. It does not require any additional mounting hardware. Printed with 5% infill . The little pegs are a little flimsy and could be replaced by nails/screws…

Pobrania
196
Polubienia
26
Ocena
0
P
PrintablesVesa

LilyGo TTGO T-Display Stand

Stand for the great LilyGo TTGO T-Display Enclosure by uzer66 . https://www.tinkercad.com/things/kNHjWwaoVol

Pobrania
191
Polubienia
23
Ocena
5
P
PrintablesIdleShands

TTGO T-Beam LORA with buttons and USB

The case by thekwijibo has a few nice features missing from the other models on thingiverse... access to the buttons/USB, a case that allows for "tilted table operation", and it aligned properly with my asymmetrical antenna board.…

Pobrania
187
Polubienia
27
Ocena
5
P
PrintablesAzega

TTGO T-Display ESP32 stand with battery case

Remixed to remove text. Category: Electronics

Pobrania
181
Polubienia
14
Ocena
0
P
Printableseried

TTGO T-Display ESP32 stand with battery case

Little stand for the TTGO esp32 board with the little lcd display. Fits a 504045 lipo battery inside. If you make it sleep, the battery will last several months (this board uses 0.3 mA on sleep). The USB-C and reset are available thru the…

Pobrania
180
Polubienia
19
Ocena
0
P
Printablespcky

TTGO T-Camera ESP32 Camera Case

This is a work-in-progress version of a case for the TTGO T-Camera PCB. At the moment the board needs to be fixed inside the case with hot glue. This will be fixed in the final version. There is also space for a li-po/li-on battery. In my…

Pobrania
174
Polubienia
17
Ocena
4,5
P
Printableswhosnext

TTGO T-CALL Housing

As the TTGO T-CALL is a little fragile I build a casing for it, also with space for a lipo battery on the middle layer. It works perfectly the only thing to add is TTGO T-CALL and a battery, the USB cable fits perfectly on the side. Once…

Pobrania
156
Polubienia
2
Ocena
0
P
PrintablesMr. Togi

Meshtastic Window Holder / Fenster Halter for LILIGO TTGO LoRa V2.1

Ich habe passend zum Gehäuse eine Fensterhalterung konstruiert. Passend für dieses Gehäuse: https://www.thingiverse.com/thing:4797115 Diese Saugnäpfe habe ich verwendet: https://amzn.to/48ASWkn Das Gehäuse kann stehend ohne Stützen…

Pobrania
155
Polubienia
51
Ocena
0
P
PrintablesYuval Benjamin

TTGO T-Display Enclosure Remastered

Enclosure for TTGO T-Display ESP32 MCU for 3D print and STEP file for customizations Original design by LilyGO wasn't suitable for easy print and needed some improvements. So I made it from scratch following the original look. This design…

Pobrania
152
Polubienia
9
Ocena
0
P
PrintablesArie Kraak

LilyGo TTGO and 18650 case

BOM: 2x M3 x 5 x 4mm heat set insert 2x M3 2x M2 x 4mm SHCS

Pobrania
152
Polubienia
12
Ocena
0
P
PrintablesSquasherJoe

TTGO T7 ESP32 Enclosure with Battery Compartment

Enclosure for TTGO T7 ESP32 Board and a LiPo battery Designed for portable use of the TTGO-T7 ESP32 development board. I recommend supports for the clips on the part that holds the ESP32 and slides into the case. Fits into a trouser…

Pobrania
152
Polubienia
21
Ocena
0
P
Printablesdevcoinbr

TTGO T-Display Case JADE DIY Hardwallet

This project was developed for a Lilygo T-Display with the aim of being used as a hardwallet in conjunction with the Blockstream JADE open source project. My goal is to raise a fund to create an online course for bitcoiners who want to be…

Pobrania
152
Polubienia
7
Ocena
0
P
PrintablesDirkHoefle

Case for LILYGO TTGO VGA32 V1.4 Controller

Case for LILYGO® TTGO VGA32 V1.4 Controller you will need the LILYGO® TTGO VGA32 V1.4 Controller…

Pobrania
147
Polubienia
3
Ocena
0
P
PrintablesTeddyGOD

LilyGO TTGO T3 LoRa32 433MHz V1.6.1 ESP32

The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it…

Pobrania
144
Polubienia
9
Ocena
0
P
PrintablesMartien

Bitcoin NerdMiner LILYGO TTGO T-Display ESP32 Case

Cool case for your NerdMiner running on a LilyGo T-Display. This is my very first design ever! It's a tight so be careful not to break the reset button on your T-Display. Model doesn't require any screws.

Pobrania
142
Polubienia
14
Ocena
0
P
Printables3DJupp

TTGO T-Beam v10 case for TTN-Mapper - v3

Changed the design of the main housing a little. Added a hole in order to see the status LED, if configured. Furthermore the Display cutout was increased and moved a little. Otherwise the screen contents are not readable (depends, which…

Pobrania
132
Polubienia
8
Ocena
0
P
Printablesvindolin

TTGO T-Beam Case for board version 0.7 - Remix

I remixed the model so it fits when an OLED display is soldered directly to the board pins. Changed the diameter of the screw holes so that 3mm screws can be used. Added spacers for greater stability. I printed the front with the display…

Pobrania
121
Polubienia
6
Ocena
0
P
PrintablesAltair

TTGO VGA32 case with text and buttons

Remixed version of Firepower's TTGO VGA32 case.

Pobrania
121
Polubienia
4
Ocena
5
P
PrintablesJózsef Krizsik
Pobrania
116
Polubienia
6
Ocena
0
P
Printableskitsuno

Meshtastic TTGO T-Beam Case

Una carcasa para el TTGO T-Beam, remixeado de @Breeki Hardware: 4x M3x20 2x M3x10 4x CM2x4 2mm screws

Pobrania
116
Polubienia
26
Ocena
5
P
Printablesluma

TTGO T-Beam v1.0 Enclosure

TTGO T-Beam v1.0 Enclosure This is an enclosure for the TTGO T-Beam with OLED version 1.0. All credit goes to the SoftRF project for the original design. Remixed features This enclosure has been generalized for use outside of the SoftRF…

Pobrania
113
Polubienia
11
Ocena
0
P
PrintablesRoyal Farris

TTGO T-DISPLAY

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gm3oIDjlAjH An enclosure for the TTGO T-Display development board featuring the ESP32 microcontroller with wifi, bluetooth, a battery charger and a TFT…

Pobrania
110
Polubienia
7
Ocena
0
P
PrintablesYeet

TTGO LoRa32v1 case

Snap-fit case for TTGO LoRa32v1. Tested for version 1 of the device. The case is snap-fit so its better to print it from less brittle material... e.g. PETG.

Pobrania
106
Polubienia
10
Ocena
0
P
Printablesfirepower

TTGO VGA32 V1.4 Case

TTGO VGA32 V1.4 Case with access to all ports and switches uses 4 x M3 screws Remix of https://www.thingiverse.com/thing:4565213 Print Settings Printer: Geeetech 3in1 E3D V6 Rafts: No Supports: No Resolution: 0.2 Infill: No Filament:…

Pobrania
106
Polubienia
6
Ocena
0
P
Printableskohkoh

TTGO T-Beam - Window/Wall Suction Cup case

Window/Wall Suction Cup TTGO T-Beam case, for putting in the Enclosure designed by thekwijibo. There shouldnt be any reason you cant use screws in place of suction cups, if you wanted to attach this to brick/wood. Suction cups used:…

Pobrania
102
Polubienia
19
Ocena
0
P
PrintablesAndres L

TTGO ultra slim case (snap on)

This is a ultra slim case for the ESP32 - TTGO The PCB is secured with a slot for it and a holder from its battery connector. The lid snaps on. Enjoy!

Pobrania
101
Polubienia
20
Ocena
5
P
PrintablesAlex

LilyGO TTGO LoRa32 case without battery compartment

Case for LilyGO TTGO LoRa32 without battery compartment. Currently needs glue or elastic bands to stay close.

Pobrania
99
Polubienia
10
Ocena
5
P
Printablesjangrewe

TTGO T-Beam T22_v1.1 20191212 Case (IPEX Version)

The idea behind this case was to create something minimal, sturdy and without any fasteners. The T-Beam is aligned with the case through the use of a brace below the PCB, which locks it into place on the mounts so that there's no sliding…

Pobrania
97
Polubienia
13
Ocena
0
P
Printableserin

LILYGO TTGO T-CALL DIN rail mount

This design mounts module using 5-10mm stands with M3 screws.

Pobrania
89
Polubienia
17
Ocena
0
P
PrintablesVyc

TTGO Lora32 T3 Slimline Case (Thicker+Straps)

Case for LilyGO TTGO T3_V1.6.1

Pobrania
89
Polubienia
3
Ocena
0
P
PrintablesLibre Tactical

Meshtastic TTGO Mesh Radio Case

Full instructions for sourcing parts and assembling the radio can be found at https://libretactical.com/pages/atak-mesh-build-instructions. An assembled, programmed, and ready-to-go meshtastic node using this case can be purchased at…

Pobrania
76
Polubienia
10
Ocena
0
P
Printablesdiyit

TTGO T5 tiny weather station

All parts should be printable using 0.2mm. Buttons can be printed using 0.15mm layer. The fridge mount and the back part require plate support material. The front part and buttons can be printer without support. Tested with Generinc PLA /…

Pobrania
74
Polubienia
32
Ocena
0
P
Printablesbkgoodman

Lilygo TTGO T5S 2.9" ESP32 ePaper Board Case

Snap-together case (no hardware) for this board. Features a window for ePaper display, switch, USB port, and detents for the boards 4 buttons. http://www.lilygo.cn/prod_view.aspx?TypeId=50031&Id=1169&FId=t3:50031:3 My Github repo for…

Pobrania
73
Polubienia
13
Ocena
5

Lilygo TTGO T3 Case with disposable vaper battery

Box for the esp32 assembled by lilygo model ttgo t3. This casing allows you to have a recycled vaper battery to maintain autonomy time. It also leaves the space free for the charging connectors, the power switch and the reset button.

Pobrania
69
Polubienia
12
Ocena
0
P
PrintablesStonemull

TTGO T-Display case

More to be added, display clips into a holder (surround.stl) which offers some protection and insulation by itself, the slide can then slide into either the close_slide which completely encapsulates the device or one with full access to…

Pobrania
68
Polubienia
5
Ocena
0
P
PrintablesMegaCadler

Case for TTGO T5 ESP32 epaper

A simple housing for LILYGO® TTGO T5 V2.0 WiFi Wireless Module bluetooth ESP32 2.13 e-Paper Display Development Board…

Pobrania
68
Polubienia
10
Ocena
0
P
PrintablesPunkgeek

TTGO T Camera case

I wanted a case that was small, easy to print and easy to assemble with two dabs of super-glue. So I made this. I hope it is useful to others. Also check out my open source project . Print instructions Category: Electronics

Pobrania
67
Polubienia
3
Ocena
5
P
Printablesjanek

Simple CO2 meter and logger (TTGO+MH-Z19)

I only made this case, original build instructions are here https://emariete.com/en/meter-co2-gadget/

Pobrania
66
Polubienia
8
Ocena
0
P
PrintablesSsgtStretch

(Remix) Meshtastic Enclosure For LILYGO T-Beam ESP32 TTGO Development Board

I basically just took the original model and made it fit my larger antenna. After that I just kept making small changes until I was happy with it. Everything fits really well now and looks a little bit neater. I wanted something with the…

Pobrania
63
Polubienia
5
Ocena
5
P
Printablespetrepa

TTGO T-Camera video doorbell

--- SHOULD BE CONSIDERED AS A WORK IN PROGRESS --- Made this 3D-printed housing for a TTGO T-Camera ESP32 module to work as a video doorbell for use in Home Assistant. Also fits a 12 mm illuminated push button, that can be wired to the…

Pobrania
58
Polubienia
5
Ocena
0
P
PrintablesDigitalDan

Base for TTGO T-Beam V1.1

I wanted a base so that the device doesn't slide around in the car. It is a little tight ( as can be sen in the lower left of the pics) so you may want to expand it a bit length ways by about 3% or so in your slicer before printing.

Pobrania
55
Polubienia
5
Ocena
0
P
Printablesaplyard

TTGO-T Lipo Case

TTGO T-Display LiPo Case V2 Update I was not happy with the results of how the 2 parts snap in place so a redesigned it to lock with M2x8mm hex screws This is a case for the TTGO T-Dislpay that fits a 503035 Lipo Battaery 600mah. Designed…

Pobrania
49
Polubienia
7
Ocena
0
P
PrintablesPolymath

Case for a TTGO ESP-32-OLED board

Designed to not require screws and so so no screw posts or bosses within the case. Antenna socket space in the clear. Flexible assignement of the USB cable port to allow for different plug designs.…

Pobrania
48
Polubienia
4
Ocena
0
P
Printablesem3kay
Pobrania
48
Polubienia
4
Ocena
0
P
Printablesblobule

ttgo case

This is a ttgo case. It feature a window for the display, buttons, and is articulated and print in place. The provided openscad source can be adjusted for some ttgo that have a slightly misaligned display.

Pobrania
45
Polubienia
3
Ocena
0
P
Printablesdannywalker

TTGO Lora32 T3 3 Button & LiPo Case

A case for the TTGO Lora32 which makes it a more useful portable device, with the intention of using it as a pager. It has three buttons on 12.7mm centres (can be done on perfboard), space for up to a 40 x 60mm LiPo and a 9.6mm piezo…

Pobrania
44
Polubienia
1
Ocena
0

TTGO Lora32 Case

3d printed housing for TTGO LoRa32 V1.6. The model was printed with a 0.4mm nozzle, ABS carbon plastic. List of hardware: Battery 603035, 700mAh Din912 m2*5 - 2 pcs. Din912 M2.5*6 - 4 pcs. Insert nut m2*3*5 - 2 pcs. Insert nut m2.5*4*5 -…

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesEmiel

TTGO T-PCIE with SIM7000g

TTGO T-PCIE with SIM7000G module: I was not able to find any CAD models for these two lilygo modules so I created my own. I had to measure everything myself which might have caused some inaccuracies in the placement of the components or…

Pobrania
42
Polubienia
2
Ocena
0
P
PrintablesDiyron

TTGO T-Beam v10 case for TTN-Mapper

just another case for the TTGO T-Beam Version 10 (1.0) used for mapping of the TTN key features: designed for v10 revision (position of lora-antenna connector changed) tool-less installation of the lid, the lid snaps in to place and fix…

Pobrania
40
Polubienia
4
Ocena
0
P
Printablesdstarke

TTGO T4 Case

A case for the TTGO T4 v1.3 ESP32 development board. Only two of three buttons are available as the remaining one is also connected to an internal sensor and therefore not fully usable as user button. Furthermore, boot and reset switches…

Pobrania
40
Polubienia
1
Ocena
0
P
PrintablesPunkgeek

TTGO T5 case for eink ESP32 board

A stylish(ish) case for the small/cheap eink board from TTGO. Also - check out my open source project for these devices. Print instructions Category: Electronics

Pobrania
39
Polubienia
6
Ocena
0
P
PrintablesThorrak

TiltBridge TTGO ESP32 OLED Enclosure

This is an enclosure for the "TTGO" style of ESP32 OLED board. It is designed to be secured with 4x M3 square nuts & 4x M3 16mm bolts. This enclosure was originally designed for the TiltBridge project but should work with any project that…

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesMerlin

TTGO-Display Case

TTGO-Display case without buttons. Screws:

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesJan Hubík

TTGO T-Display Enclosure (no pin holes)

I did not need the pin holes in the backside of the case, so I removed them.

Pobrania
36
Polubienia
0
Ocena
5
P
PrintablesDhruvish Dave

LILYGO ttgo t camera

ttgo t camera Casing woth big doorbell option

Pobrania
36
Polubienia
4
Ocena
0
P
Printablessenz

TTGO Lora32 T3 Modular Case

Added a battery holder for 103565 3000mah battery. Its friction fit. "Fixed" by screwing in antenna. Holds pretty well. You can add some foam between battery and the case, if tolerances are too big. My first model, I was learning in the…

Pobrania
31
Polubienia
5
Ocena
5
P
PrintablesMihai_S

TTGO case for 2inch TFT

Lid is modified to cover the TFT/LCD and fixed antenna hole. Base has been reinforced at the bottom. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.4 Infill: 15% Filament: Prusament PLA BLACK…

Pobrania
31
Polubienia
0
Ocena
0
P
Printablescn

Alternative TTGO T-Beam OLED front for SoftRF Case

Modified OLED front to allow for more rectangular inexpensive 0.96" OLED boards Print instructions Category: Parts Summary Modified OLED front to allow for more rectangular inexpensive 0.96" OLED boards Print Settings Printer Brand:…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesVacek238

Case for LilyGO TTGO T3_V1.6

Case for LilyGO TTGO T3_V1.6 designed to be mounted on a wall of my camper-van There is a place for fixing a micro step-down module with double-sided adhesive tape. It can be powered by a car battery. There is also a hole for the cable…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesJayFiDev

Minimal Design Case for TTGO Dev Board (ESP32 )

Minimal two part case for a TTGO Esp32 development board. Still work in progress, had removed two of the buttons for another project. Will update model when new board arrives here. Mounting holes for the screws are designed in a way that…

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesShroamer

TTGO T-Display shell

Single part enclosure for TTGO's T-Display board. Mounts by latching to PCB, covering top side of the board. Has 2 buttons over user switches, and a button over reset switch in side. Integrated supports and mouse ears version (-SUP.STEP)…

Pobrania
30
Polubienia
2
Ocena
0
P
Printablescrazedny

ISDT BattGo BG-8S Battery Meter Case for JAG35 SLM24 LiFePO4 24v 50A 8s 1200Wh Battery

I picked up an ISDT BattGo BG-8S Battery meter and wanted a way to mount it on the battery so I designed a case for it. This is meant for a SLM24 LIFEPO4 24V 50A 8S 1200WH BATTERY from JAG35.com…

Pobrania
30
Polubienia
0
Ocena
0
P
PrintablesThibLM

ISDT BG-8S BattGO Smart Battery Checker Display Cover

It's a remix from Alexandr IDK (thingiverse) i just add a small hole to pass a lanyard and attached it to the checker. Post your makes!

Pobrania
27
Polubienia
0
Ocena
0
P
PrintablesPunkgeek

TTGO T5s case for eink display

Looks good in woodfill PLA. Ver 2 just posted, it has a hoop for mounting and space inside for a 600mah lipo. Also - check out my open source project for these devices. Print instructions Category: Electronics

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesHerrRiebmann

TTGO T5s 2.7" eInk display with 18650 Battery (V2)

A case, which holds my TTGO T5s 2.7" eInk display. Below can be stored a 18650 battery ( with a single battery clip holder ) and there is still space for a 433mHz sender ( XY-FST ). The buttons are very fragile, when the lid is not…

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesPunkgeek

TTGO T5 2.9" screen case

A case for the TTGO T5 and the wide/short 2.9" e-ink screen. Print instructions Category: Gadgets

Pobrania
24
Polubienia
2
Ocena
0
P
Printablesrodb

TTGO T5 tiny weather station mount replacement

The original piece had a single magnet in the middle of the mount part. On our fridge the display has a tendency to pivot so I added smaller 12mm diameter 2mm height magnets on the left and right.

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesKeen

Meshtastic TTGO T-Beam Case No OLED frame insert

Unfortunately my screen was misaligned, and the protruding frame of the original design chipped the corner of my OLED causing an interesting interlaced effect.

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesMaxgames17

Lilygo ttgo t3 v1.6.1 double 18650 battery case (+ bigger antenna hole and sdcard slot)

I liked the original case but my antenna is much bigger than the default one, so i used the opportunity to make it thicker (so that the batteries fit) also add a second battery(wich works sort of like an handle), these are the battery…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesBeavis

Meshtastic TTGO T-Beam Case - Remix

Remix of no need for M2 heated thread inserts, use M2x8 or M2x10 self tapping screws back is flat and easier to print case is smaller ( ~13mm )

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesNintenDooM

Recessed reset button for TTGO v2 LORA with buttons and 1.3" OLED Enclosure by TheKwijibo

Recessed the reset button so it is flush with the case to prevent accidental pressing. Fits original model https://www.printables.com/model/158261-ttgo-v2-lora-with-buttons-and-13-oled-enclosure

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesValery Kuzubov

Case for LILYGO TTGO T-Call and Relay module

There is a case with top cover for my project with TTGO T-Call

Pobrania
18
Polubienia
2
Ocena
0
P
Pobrania
18
Polubienia
8
Ocena
0