180 modeli
Universal clip that fits around 5 gallon bucket rim. Keeps bucket from sticking together when stacked. For best results use 3 clips evenly spaced around the rim.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Fred has been scaled down to 17mm wide (66.84% scale). 20mm calibration cube was designed in fusion360 to fit fred, models were combined in tinkercad.
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
For a UK Fan, small 3 color Block.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Addition to Leifheit clothes dryer as in picture - your robotic vacuum cleaner wont stuck anymore
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
IMPORTANT NOTE: Please only use a flexible filament. I used an 89A Shore Hardness PLA from Ataraxia. If made of ridged PLA, PETG, ABS, etc., and the tuck comes partially out of position and is sticking out, it will will impale you. Trust…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena jednego wariantu
Wall Plug Stuck!! (dummy) CABINET KNOB “Too Hard To Plug It Off!” Turn the pain point into the design. If it was hard to plug off, let it be your knob! Just fixed it to your cabinet. We designed it in 3 different ways 1. "iPhone charger…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
If you are pissed off of the stuck garden hose, this little under one meter of filament model will make you happy. Let's end up with garden hose stuck while pulling it.
Wydruk około 0,10 €–0,13 € nettoWstępna wycena jednego wariantu
My Homestuck collection is growing! This is the character Damara from Homestuck. To make this model you will also require 1 x paperclip. I'm particularly fond of this one, because it required a little problem solving. Damara has some very…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Got tired of small LEGO parts getting stuck in the bottom of these containers and made a custom plug that fits snug. No need to glue it in place!! Printed in PETG+ with 15% infill, 2 walls, 3 layers for top and bottom.…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Beatbot iSkim 2026 kept getting stuck on a shallow step in my pool, so I designed extended bumper/legs that attach onto the robot's existing legs to add clearance and stop it from beaching itself. No modification to the iSkim required.…
Wydruk około 1,72 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed an easy way to test my support settings when it comes to actually removing the supports from your prints. Especially when they are difficult to remove. This test print is primarily for you to test the different values / results…
If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . ____________________________________________________ ***FITS TUCKBOX (Walmart)…
Print in place Needs Supports
Print Orientation: Recommended to print on its back where the most surface area is in contact with the build plate.
18.05.2025: OBSOLETE! Successor model IAF Idler (Install and Forget) can be found here: https://www.printables.com/model/1269218-nextruder-mmu-multi-material-gamechanger-iaf-idler After many failed prints in which the extruder stops…
Less noticeable than an over the belt clip. Better support than a J-clip. Three lengths included. I like the shorter ones for subcompacts. Fits 1.5 inch belt. And after a few iterations and several months testing we have – Version 2! V2…
Źródło oznaczyło ten model jako treść 18+.
These pads lift the chair by 8mm- enough, so that the Vacuum Robot is not getting stucked.
Kentucky, USA (KY) Topographic Relief Map with Rivers and Coastal Waters Kentucky, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
My best friend's son was recently accepted into the University of Kentucky and my son and I made him this to put on his desk. Printed using eSun PLA Pro (Blue and White) with 0.2mm layers. Manual filament swap at 25.2mm or layer 126 (if…
A set of inserts that can drop into the included tuck boxes, which will also function as holders for the resources etc. The main aim was retaining the original tuck boxes while at the same time increasing their strength, and making them…
For this model use the following parameters. Print Settings: Layer Height: 0.16mm (Or lower) Infill: 10% Infill Type: Grid - Gyroid Filament: PLA Supports: No Brim: No
Sometimes toolhead cables (extruder, filament sensor, hotend etc) can get caught, damaged or pulled out at the rear or right side of the printer during large prints, nozzle wiping and homing. This can also offset the homing. This is more…
KFC / Kentucky Fried Chicken logo in 3D. 5mm high.
Love my Voxelab Aquila printer but I dont like how the screen hangs off to the right! So, I designed a Screen Tuck Mod to get the display closer to the printer. Much better! If you like what I do, buy me a coffee from the link below. :)…
The enhanced wing features a taller belt height and taller claw grip to really push the pistol grip into, or around, or waist. The design prints in two parts (wing and locking peg) so the wing itself can print flat. The locking peg is…
This is a minimal filament clip that employs friction to hold down the loose filament end. Tuck the loose filament end into the angled hole then hook the clip to any strand on the spool. The angled hole should improve the friction to hold…
Title: The Adventures of Robin Hood and Friar Tuck in Danger Expansion Publisher: KOSMOS Designer: Michael Menzel Organizer/box insert for The Adventures of Robin Hood and the Friar Tuck in Danger expansion. This will allow for both to…
Automatic fish feeder for your aquarium. Stuck-free mechanism - a spring-loaded blade decreases the load when a pellet is on the edge Self-cleaning structure - debris will drop into the aquarium Easy to make - only 3 parts Note: It…
I'm still new to 3d printing, but I used an image converter to make a 3d model of the older UK wildcats logo and color it in bambu studio. Turned out great for me with this standard 0.4 nozzle print profile. I used 15% infill, but change…
The original Cube design is from south2012 from Thingiverse. I redesigned it and it can fit a coin inside it. A fun thing to show your friends. They will wonder how the coin got inside there.
For this model use the following parameters. Print Settings: Layer Height: 0.16mm (Or lower) Infill: 10% Infill Type: Grid - Gyroid Filament: PLA Supports: No Brim: No
A holster claw that pushes against the belt to prevent the grip of the handgun from protruding outwards, this helps with concealability. Settings I Used: - PETG - 5 Walls - 6 top layers and 6 bottom layers, 1mm top and bottom layer height…
Santa Stuck in Crushed Chimney – Stylized 3D Print Design This cartoon-style 3D model features Santa Claus comically stuck headfirst in a brick chimney, with his legs flailing in the air and his iconic red suit and black boots on full…
Extra bumpers / antennas to attach to front of vacuum's bumper to prevent it from getting stuck under kitchen cabinets. Printed from PETG.
Made for the a4t-wwbmg dual sensor extruder - untested with other versions of WWBMG. (Sherpa mini spacing) Made for the a4t-wwbmg dual sensor extruder - untested with other versions of WWBMG. Either too high or too wide - Its diabolical…
I broke a clip the other day and didn't have anymore spares, but then I remembered that what I do have is a printer. This is a straight copy with some minor alterations for easier/better printing. I don't think I got the geometry of the…
Kentucky Wildcats Earrings / keychain/ pendant Designed for bambu studio w/ams Although I have not tested it, you could do a color swap with an ams
Pup Tag of the Mighty Twins Tuck and Ella
Get you some Kentucky! Made this one for our house, but hope you enjoy it in yours :) I printed the letters and stand on a second printer that uses a white prusament, so the letters will stand out without having to pause the print for a…
Lost in Space (1965) Models from Season 1 Episode "The Sky Pirate" A.P. Tuckers Spaceship
corner barrier against stuck of vacuum robot on clothes dryer stand
Playful decorative bunny stuck inside a cracked Easter egg with tiny paws showing.
A 2D tile of John Egbert from Homestuck. I made this for my daughter. Print instructions I printed it at 0.2mm 10% infill in white eSun PLA+ but it can be printed from any brand filament at most slicer settings within reason.
Feel free to adjust the size however you like. Join my Patreon to support my work and unlock awesome perks: 🛠 Commercial Licenses: Get the rights to sell prints of my models. 🚀 Early Access: Download new designs before they go public. 💎…
If your robot vacuum keeps getting stuck on your airer, these raised replacement feet are a clean and aesthetic solution. Instead of adding barriers and other extra plastic parts, these feet replace the original ones. It adds extra height…
Print laying flat. Adjust thickness as desired, default thickness allows it to stand up sturdily. Print in desired filament, eSun PLA+ in blue or white matches Kentucky colors very well!
Couldn't find Homestuck characters anywhere, so I thought I'd give it a go.
A tuck box for the army tokens in Neuroshima Hex! Here is a laser-cut version. Support My Work Should you want to, you can support me on Patreon . If you cannot become a patron, remember that likes are free and make designers happy! :-)…
'There she is. Forged in fire by the smiths of Pipplemop, commissioned by the sage Lord of the Wozzinjay Fiefdom in the Realm of the Snargly Fruzmigbubbins.' Here's my test of the Warhammer of Zillyhoo. I made this long time ago, to print…
This handy gadget to helps tuck square cut filter material (of your choice) into your reusable K-cup pods for easy assembly and maximum filling. It saves a lot of mess cleaning out used coffee grounds. See pictures for the exact pod that…
I printed this on a Core One in PETG CF with 6 perimeters and 25% gyroid infill. Probably overkill, but I didn't want it to break.
Get you some Kentucky! Made this model into a large magnet that can fit up to three 10x2.6mm magnets. How many magnets you use is up to you :) Check out the display version of this object that looks great on a shelf:…
These are no one-size-fits-all Roomba stoppers like others I've found. They are tailor-made for the following two laundry rack models: Leifheit Pegasus Alpfa Magic I printed them from TPU and fixed them with a small screw. The screw may…
Kentucky Wildcats Oversized Necklace Logo that I designed. I hope you enjoy!
Made this simple keychain in the shape of the state of Kentucky. V3 Updates: After field testing this keychain (aka actually having it on my keys) I found that the ring attaching the keychain to my keyring was kind of weak so I added a…
This is a captcha card I made based off of an image. Its mostly accurate, but not perfect. The tall version is 38.1 mm, the regular version is 12.7 mm, and the small version is 9.525 mm.
This was my first real attempt at learning how to design something for a gift. I used Tinkercad and failed several times before I printed something I liked. Overall this is 3.2 mm in height. With rubber or cork bottom (which I do add), it…
❄ Snowstuck Gnomes – A Chilly Tale of Tiny Trouble! 🧙♂ These poor gnomes took one wrong step in the winter wonderland… and now they’re stuck up to their beards in snow! Few supports are needed. I used organic-style supports, which peeled…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Funny Easter bunny decoration with a bunny stuck in a wooden fence — only the fluffy tail and little paws are visible.
On the Stern Pinball “ Foo Fighters” game there in an area in the upper right of the playfield where an airborne ball can get stuck between the alien toy and the left ramp wireform. Some users have been able to avoid this by adjusting how…
Sometimes, wet beans get stuck. Spin to push leftover beans to the grinder. Worked well with PETG.
No need for support, use brim for better adhesing the corners. Infill 5% is enough, but I as you feel printed with 0.25 Structural Since this game is only available on Ali nowadays…. This version of the game has different box dimensions,…
I’ve had problems with my Xiaomi Dreame F9 robot vacuum getting stuck under low furniture like my bookshelf. This bumper is a solution I came up with. It fits snugly on the front brim of the robot and prevents it from going too far under…
The model is suitable for 3D printing. It can be printed both hollow and solid. If you want a keychain or a stable one, check my profile.
Lands of Evershade makes use of cardstock tuck boxes for each player to hold their character's little bits and pieces. These cardstock boxes are not particularly functional on the table. The stock boxes have fine graphics but those do not…
Works alright. Made for the SVX102T flattener and reducer, but can be easily resized to your needs. I used one successfully on threads, and a pair on smooth tubing. 5mm thickness is fairly sturdy and makes alright contact. It can still…
Original design of the 3D pen spool is great, but filament will get stuck easily in the spool and causing problem. This is the spool re-design remix to reduce filament tension, letting the filament slide out on its own instead of dragged…
My Shimano M485 had one of the pistons quite stuck, which resulted in one of the brake pads being completely worn out rather quickly. I used this to keep the other piston (the one that still moved) in place and to then exert pressure on…
My Homestuck collection is growing! This is the character Nepeta from Homestuck. I do love a good character identifying as a cat, or whatever Nepeta's story is. I'm not the Homestuck fan, my daughter is and despite trying hard to follow…
The original design of the device would get stuck on the heated bed when I used it, so I redesigned it to reduce its height to avoid scratching the heated bed, as shown in the second picture. Just use PETG to print. I print 100% density.…
It is the perfect decoration for a Gamer's desk Hope you like it!
a ball in a cube that won't come out no matter what you do!
Bring a dose of holiday humor into your seasonal décor with the Santa Stuck in Chimney Candle Holder — a playful and charming 3D-printed piece designed to light up your Christmas evenings with a smile. This whimsical decor item features…
Remixed the original to fit the existing board that comes in the charge base. I just removed that and hot glued it into this one. Did this to address the issue with the pogo pins getting stuck and not contacting the light to charge. This…
Made taller 25mm more scale upper glass, thin panels to glue on smaller window for color contrast option and rail around the catwalk with the modified holes in catwalk. A front door with knob I printed with .15 layer for smaller detail.…
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN . This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
As I never did get around to picking up a stuck case removing kit from RCBS or the like as it just never occurred to me to need to. After seeing I don't remember where, most likely one of the reloading manuals that when you have a brain…
What happens when you mix a gnome with a trucker hat? …only this guy knows! Makes a perfect good luck charm for your favorite trucker's dash (super glue not included).
gremlin stucked in lights at christmas
Tool allowing to unstuck a Ryzen CPU stuck to its heatsink. Apply heat with an hair drier, and gently push clockwise or anti-clockwise against the lid (CPU cover in metal) with that tool. You can use a cotton cloth to prevent the CPU to…
On some older PTS EPM Magazines it is possible for the catch that keeps the bbs in the magazine when not in the gun to get stuck in the back, which will cause your magazine to spill all remaining bbs once you take it from the gun. This is…
The model is suitable for 3D printing, and the recommended size of the entire figure is about 5 cm. It can be printed both hollow and solid. The ring size in the photo is smaller.
Clip on fishing rod holder for 2025 TuckTec Pro. Category: Tools
Basic aid to keep tongs closed when put into drawer for space savings. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 0.20 Infill: 25% **Filament:** 3dwarhorse Pla Black Category:…
Drying rack rising feet to prevent robot vacuum getting stuck. round to not require any adjustments clip on rack frame of 16mm Best printed in PETG or other materials allowing some flex.
English: Bring the funniest couple on television to your shelf! This 3D printable figure set features the beloved Cam and Mitchell from the hit TV show Modern Family . The models capture their unique personalities—Mitchell with his…
When I saw the latest contest, I just couldn't resist. Organic supports create so pretty trees! I just thought of my childhood days and the fun we had playing badminton; shuttlecocks stuck in a tree was a common occurrence. I found this…
Description i designed a pen holder that consists of 4 gears like the ones used in bikes. designed this in fusion: it has 5 axis like bolts and spacers between the gears to hold up all together stacked. there are 5 nuts that secure the…
I designed these inserts for the amazing game Renegades , designed by Richard Wilkins ( Ricky Royal - Box of Delight's ) The Kickstarter version comes with beautiful tuckboxes , these inserts are made to accomodate them. There is also…
This model was Designed in Fusion 360 With the help Of my brain and Hands ( also my eyes ) Already thanks for maybe downloading my model!
I have designed this strap tuck for the dimensions for my galaxy watch - 46mm. all of the edges are rounded for better feel. The model was made by me in Fusion 360. Dimensions : wall thickness : 2.5mm inside width : 21mm outside width :…
Sometimes the Konica C35 ASA/ISO dial gets stuck. It can be very difficult to turn it by hand. I made this simple tool for me, and it works very well for my Konica C35 AF. Perhaps it will be useful to someone ?
Added chamfers and the 'Prusa-trick' so the top prints nicer.
This is my second iteration of inserts for LEGO® storage bricks and heads. My first version was made from PETG, but the rigid material didn’t work well, they got loose in the end. With TPU (A95) these rings are flexible, press-fit…
