172 modeli
Intro This is a simple case/holder/cover for Yubikey 5 series USB A and USB C. Note that the versions do differ: so print USBC for USBC key and not USBA for USBC key! Info It can be printed without supports. I printed it with 0.12 layer…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar. Balancing wires will go out at the sides you can feed multiple balance wires through the covers to simplify the wiring. Fits these busbars:…
A frame to hold a copper bar acting as a busbar for high current connections at 12/24 volts. Print Settings Rafts: No Supports: No Infill: 35% Filament: addNorth PETG Category: Electronics
for me it fits for all bars. so no need to print different ones, and that makes the asselmby much more easier ;-) it has also som gap in the construction that it fits thin isolator and also thicker ones .. see pics ^^
This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is a few M3 screws and one nut. Check out my universal hot-end mount
Intro These are two simple CAD 3D models of Yubico YubiKey 5 Series security keys ( https://www.yubico.com/products/yubikey-5-overview/ ). USB A .step file and USB C .step file versions are included. Measurements were done with caliper.…
Mount your Kusba ADXL345 USB accelerometer quickly on probably any toolhead directly to your nozzle to get most accurate readings BOM (I used for my build) M3 20mm x 2 M3 6mm x 2 standard 5mm Threaded Heat Set Inserts x 4 Please let me…
Mount to hold the KUSBA ( Klipper USB Accelerometer ) board and is compatible with the Elegoo Neptune 4 Pro. It's designed to insert two M3 nuts during printing for the 5mm screws that hold the PCB to the mount and it attaches to the back…
a nearly universal mount for a KUSBA accelerometer some times mounting the board hanging off the end is necessary for the usb cable to clear the umbilical note: the hole pattern is different to the adxl345 uses a screw to clamp to the…
This is an easy to print cover for busbars to avoid shorts. It covers all metallic surfaces. clicks onto the busbar It has a slot for voltage taps (L and R version have slightly different location) Has space for 2 mm insulation between…
Mount for the KUSBA Input Shaper working with all Ender S1 Models. There are two mounts: One which is mounted on the extruder. You'll need to temporarily remove the M3x6 screw and use a M3x10. (see pictures) One which is mounted on the…
I designed a custom busbar an fuse holder using ANL fuses for my Victron ESS system. You can print as many as you like an snap them together, just add a 40x5mm copper bar on top with M8 bolts.
Parts needed 9x M8 screws 9x M8 nuts 130x20 mm copper sheet Assembly manual Cut a copper sheet to a 130x20 mm strip. Drill 7 8mm holes into it. Place it into the holder and secure it with 7 M8 screws. The cover is also secured with M8…
This is a simple mount to attach the KUSBA Usb accelerometer to almost any 3d printer. All you need is a few M3 screws. Please note that this is only used to run input shaping and then should be taken off so that your heatsink gets proper…
I had some issues with the original model from AuroraProjects, the covers didn't want to snap to the bus bars, and some of them cracked on the outer walls. I replicated the original design from the STL in onshape, with the follwing…
I designed a custom busbar holder for my Victron ESS system without fuses for the negative terminal. Just add a 40x5mm copper bar and use M8 bolts/nuts. You can find a variant with ANL fuseholder for positive terminal in my profile as well.
Small desktop creature for holding up to 10 thumb drives. Example printed in Polyalchemy Elixir. Print settings : Infill : 10% Supports - YES - buildplate only. NB. removed supports from vertical faces Enjoy. PS. If you print it, please…
A mount for using the Klipper USB Accelerometer ( KUSBA ) with the Elegoo Neptune 3 Pro Printer (Plus / Max are also likely to fit but were not tested). You will need three M3 .8 screws with matching hex nuts to attach the KUSBA to the…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar and sits snug. It has small slot at the both sides for the balancing wire. Designed using busbars that came with my batteries from nkon.nl.
I designed some mounts for kusba adxl345 usb pcb by maker panda for my Elegoo Neptune 3 Pro. For klipper resonance compensation/measuring: https://www.klipper3d.org/Measuring_Resonances.html Link to a good (german) documentation:…
This is a slim Case for USBasp - USB programmer for Atmel AVR controllers from this project https://www.fischl.de/usbasp/ 14.05.2019: Add top-cover with hole for JP2,3 and 2+3 (untested - if there are problems, contact me) Category:…
I did not search exhaustively, but what I found was a nicely designed mount, but it was situated on the rear of the X Axis carriage and because of it's position X could not be homed while it was installed. I designed this so I can just…
Good quality busbars can be quite expensive, and most of them are of bad quality or completely unsafe. I made this one of a 20mm wide, 3mm thick copper flat bar, but you could go thicker if you have a need for it. Mine is for summing 2…
A mount for using the Klipper USB Accelerometer ( KUSBA ) with the Elegoo Neptune 3 Pro Printer (Plus / Max are also likely to fit but were not tested). You will need two 20mm M3 screws to attach to the extruder and two .8 M3 screws with…
Wanted to test bed frequency using KUSBA adxl345, tried a few ideas and ended up on this. 24mm hole spacing m3x6 screws x2 Print settings: -no brim or skirt -.52 wide first layer -1.1 first layer flow to ensure its stuck on. For neptune…
Conveniently run resonance testing for Klipper input shaping without having to change mounts. This mount clips on the top of the extruder for X-axis measurement, or clamps onto the bed for Y-Axis measurement. Designed to print without…
This is a cover for the positive and negative busbar of the Victron Energy Lynx Power In 1000. The cover simply clips on top of the busbar, a small stretcher prevents it from sliding off when mounted in vertical direction. Preferably…
Covers the busbar (and the nuts!) to reduce the chance of a short circuit. Available in 2x and 4x cell configuration. Friction fits on 11.2mm nuts - this allows clearance on any BMS wires/attachments. No supports required - designed to be…
Possibilité de faire bouger la taille dans Cura pour adapter au peigne.
I don't have M3 Heated inserts so I modified the holes to be threaded M3 holes. Can secure the KUSBA in with M3x4 screws such as https://www.amazon.ca/gp/product/B0B3J35JSS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. The original…
This is a quick remix of a terminal cover set for most 280-310Ah LiFePO4 Prismatic Cells. The original files for the busbars were well designed but unfortunately quite weak and so would consistently split apart when I tried to snap them…
Use original printing instructions 14-03-2024: fixed hole spacing, was 23mm, changed to correct 23.5mm
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem: Materiały ze składania magazynu na tej obudowie: - Jeżeli chciałbyś zapoznać się z…
Enclosure for Programmer AVR compatible with USBasp ISP. The enclosure consists of two parts. M2 nuts should be placed in the bottom part. Both parts are screwed together using 8mm long M2 screws.
Case for USBASP programmer. Please check the compatibility first according to the photo. My case has holes for all the pins. -it is better to use supports for the TOP part -Infill 15 - 100%. -Indicator part is optional. If you want one,…
Busbar protector made around tipical 20x90mm for 280Ah LiFePo4. Depending on your printer, aditional supports recommended on the holes. Any material. Mines are tested and produced with PLA+
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem, dedykowane pod busbary elestyczne. Materiały ze składania magazynu na tej obudowie:…
Uses 2 m3 heat-set inserts or 2 m3 nuts. This is still a work in progress. Any advice on any changes to the design and any remixes would be appreciated. IF you would like to support me:…
This is a remix of the Rat Rig V-Minion Bed WAGO mount by Squirrelbrain with a mounting option for the KUSBA USB Accelerometer (ADXL345) for Klipper . I recreated it from scratch using measurements from Squirrelbain's STL as accurately as…
A simple mount for a Kusba accelerometer to mount to the buttom two screws on the Voron Afterburner toolhead. **updated to make the holes for heatsets slightly larger. ** Use 2 M3x5x4 heatset inserts (Voron BOM spec). Use 2 M3x6 BHSC to…
PETG should be used as non-flammable or less-flammable material. 15% infill is enough.
One piece case for USBasp board (the black one). My case has the holes for LEDs and uses pieces of clear filament as light transmitters. There is also cutout for the 5V/3V3 switch. When the board is in case it can be set with help of a…
The mount gets screwed into the print head by temporarily removing the 2 screws on the right with 2 M3x7mm bolts. The kusba is mounted with 2 M3x6mm bolts. The holes to mount the kusba are designed to be threaded with the bolt as its…
Bed mount for KUSBA v2 accelerometer to for my V-minion, but should fit any bed. I used the following hardware for this: 2 M3 nuts and 2 M3x8 screws 2 Heat inserts m3x4x5 2 M3x6 screws KUSBA GitHub: https://github.com/xbst/KUSBA
This is a simple remix that maintains the print orientation and strength of the original but for the KUSBA v2. This bed clamp allows you to temporarily mount the KUSBA v2 without damaging your bed. Bill of Materials: 4x - M3 Short…
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem, dedykowane pod busbary elestyczne. Materiały ze składania magazynu na tej obudowie:…
I needed a support for my 7.1 Audio sound card in my virtual pinball. I could not find one so I made that version.
I tried my best to find a mount that would let me use two screws to secure his ADXL board. But due to the odd hole pattern, it was hard to find anything beyond an extruder mount or afterburner. So i was using just 1 screw. However this…
A simple case for yet another USBasp dongle. This one has “USBASP v2.0 LC Technology” markings on it.
Print in ABS, ASA or PETG if you are enclosing the printer to avoid the plastic deforming. Easy to print with no need for supports or heat-set inserts. The lid will keep dust away and it also has standoffs that will press the…
This is a remix of Koop's design of the Mount for the Klipper USB Accelerometer board compatible with MicroSwiss NG extruder. As the original, this remix is compatible with KUSBA v2.3 and v2.4. I changed the design to insert M3 nuts…
This model can be used to mount the KUSBA v2 on top of the Creality Sprite extruder. Sink a pair of M3 brass inserts into the top holes to mount the KUSBA, and run a pair of M3x12 screws into the side mounts. This is a remix of an…
This is a very sturdy mount for the KUSBA 2.4 accelerometer for the prusa mk3s+, to help tune input shaping with klipper. Requires you to heat insert 2 standard M3 nuts. Until they are just flush with the surface, can be done with a…
I've pre-oriented the parts for their optimal orientation without supports. KUSBA mounts at the top where the threaded inserts are with 2 m3 screws. Uses the same bottom if you already have that printed Use the default The 100 print…
Dies ist der Innenausbau des Pistenbullys im Maßstab 1:14 Dieser Innenausbau ist kompartiebel mit diesem Pistenbully Modell: PistenBully 1:14 R/C - Pinshape Das Original Modell ist von Peter Sorgen Dieser Innenausbau wir an einem Stück…
Designed for use with OrzOrzOrz's Neptune 4 Shroud with KUBSA spacing. This adapter allows you to easily mount a Bowden tube coupler to your extruder. It is designed to prioritize strength, ensure clearance for the indicator wheel, and…
This is a remix of the model from @Karagoal, only change is I added M3 threads instead of holes for threaded inserts.
A quick mount to attach the KUSBA ADXL to an H2 extruder. There is also an 80mm print with mounting holes for the KUSBA that should fit between binder klips on a bed slinger. -Added an offset mount for cases where the part cooling fan may…
This is one of my first designs so any feedback is welcomed! I made this mount to hold the KUSBA on my Dragon Burner toolhead for V0.2. I printed it in ABS 0.2 mm layer height with no supports. (I expect any filament would work)…
Kusba accelletometer mounting bracket on extruder. Use the two screws as the cap are used To setup in neptune pro you can follow this https://www.printsleo3d.com/new-page or check https://github.com/xbst/KUSBA
merging together a bunch of print heads to get all the features I wanted here is a list of what I want from this print head kubsa mount 3x 5015 fans beacon mount threaded inserts Update Aug 7, FINALLY actually printed this. I used: 6x m3…
Simple and easy Husband and Wife coasters. Makes a fun and personalized wedding gift. Color change is the same for all files at 2.12mm or layer 13.
Just a simple remix of Bele2009's excellent mount that adds retention tabs to keep it from sliding out front to back when mounted in a different orientation.
Simple prototype model and build of a jerkstopper for USBA-Male to USBA-Female cable. I printed this in a low resolution setting and it worked so well I didn't bother to optimize it. This can easily be modified to reduce material…
The easiest and best way to mount an accelerometer to your E3D REVO hotend. Designed to mount a KUSBA or standard ADXL345 Accelerometer board to your E3D REVO hotend. There are two models: 1) Standard M3x12 screws and M3 nuts . 2) M3…
Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.
🇩🇪 Deutsch Phasenschienen-Berührungsschutz (Schneider kompatibel) Dieser 3D-gedruckte Berührungsschutz für Phasenschienenkontakte wurde für Schneider Electric Phasenschienen entwickelt und kann auch mit baugleichen Phasenschienen anderer…
Can be that you need to scale it down to 10% Just drafted out a Mount for the Kusba to my Anycubic Vyper. Fits to the Printbed and Printhead. Should also fit other Anycubic Printers. Widest holes fit the Printbed. Narrow holes fit the…
Hey, This is very simple adapter for Biqu H2 (V2) extruder to mount KUSBA 2 on top of it. I've printed in PETG with 50% infill, but any other material should be fine as well. 2x - M3 8mm screws to mount adapter to extruder 2x - M3 4mm (or…
Original Eve busbar for LF304
Do pobrania mój projekt szyny zbiorczej dla baterii / magazynu energii, w zestawie wszystkie pliki potrzebne do wykonania projektu, jak wiadomo element oznaczony jako aluminium musimy wyfrezować na z aluminium na frezarce CNC :) .. Jest…
This is my prototype :) - If it does not fit 100% simply use some force or a lighter to heat the connection points up slightly! Should fit most of the common USB Sticks! Have fun! Recommended to print with dual material (PLA & PETG…
Well-fitting mounting cage for the genuine E3D Titan Aero Extruder on an Anycubic Kobra. It also has 2 mounting holes for a KUSBA PCB (maybe also suitable for ADXL345 PCB. Works with all stepper motors including the stock Anycubic Kobra…
KUSBA V2 USB Accelerometer STL File for Klipper- I downloaded the CAD file and converted it to a STL file so that I can design my own custom mount for my Delta Kossel printer. Hole diameter: 3.4mm Hole spacing: 23.5mm If you like my…
Die sonst schon vorhanden Modelle im Netz erlauben es nicht das ankommende Kabel in die gleiche Richtung auszurichten wie das abgehende Kabel
Sammelschiene für 12/24V Systeme Update V2 Der Träger wurde überarbeitet, die Schraubenköpfe haben jetzt Kontakt zur Kupferschiene. Die Heat Inserts wurden durch M4 Muttern ersetzt. Die Kupferschiene wir durch 2x M4 Schraube am Träger…
Learning to 3d model scale items. This is a model of the busbar for a Yinlong 66160 LTO 45ah Cell.
Mount to attach kusba adxl accelerometer to flsun v400 when using the fan shroud for the BigtreeTech Knomi screen. I plan on leaving my accelerometer install permanently. 3mf file is attached feel free to do whatever you like. I printed…
I used the mount hole locations from the "KUSBA mount for spite" and used the mount holes from the "adxl343 mount for microswiss" for the location on the NG extruder. Can be either used as a press fit as it holds quite well or use a 12mm…
Hello! Since I didnt find a mount for the ADXL345 from Kusba, I made one myself. I'm new to 3d printing and especially CAD but I tested the mount and it works. It is designed to hold the Kusba with double sided tape, it fits snug and…
This mount replace the part cooling fan.
Ich brauchte ein paar einfach an- und abmontierbare Stützfüße um ein ausklappbares Bettgestell in unserem Campervan (VW-Caddy) abzustützen. Ich teile sie hier zur Inspiration, zur Anpassung und/oder zum Remixen. Die Sützfüße lassen sich…
Dimensioned on the official model of the KUSBA V2 from the KUSBA github (user xbst) This isn't modeled line-to-line but it is a tight fit and may need some modification depending on how well your printer is calibrated. I had a great fit…
My remix for the very nice looking KUSBA mount by @PhilippSchmid_897996. Needs three M3 bolts with matching nuts.
Download Project Shield for Busbars terminals LFP 280Ah. Shields prevent accidental short-circuit, additionally protect terminals from damage: Materials from the assembly: ----------------------------------------------- - Facebook Group:…
KUSBA V2 USB Accelerometer cover . name is self explanatory . didn't like that the KUSBA didn't have a cover . looked everywhere couldn't find one so did some thinking and this is the result
This is a remix of original model here https://www.printables.com/model/892072-victron-lynx-power-in-busbar-cover
Kusba Accelerometer mount designed for the Satsana Dual 5015 Fan Duct. Very simple print, extremely sturdy with locating pins. Supports 4010 fans and 4020 fans. Simply unscrew the two top screws for your fan and put the two locating pins…
this will allow you to easily swap between measuring the bed and print head to use this model you need a 15x8mm neodym magnet and 2 self threading screws pause the print and insert magnet
Mount for KUSBA (V2) adxl on BIQU H2 and Bed Slinger https://github.com/xbst/KUSBA KUSBA - “Klipper USB Accelerometer” A PCB designed to make Klipper's input shaping much easier by simplifying the wiring and config for measuring…
print flat no supports required unless you want mounting machine screws are M3*8 with a nut on the back seems to fit perfect mounting to the extruder head are 2x m3*16
USB and USBc Front IO panel for Mac Pro 1.1 "cheese grater" mod Front IO panel replacement for Mac Pro case conversion. It fits two USB-a ports and one USB-c port. [no audio jack because I couldn't find an HD audio cable with a single…
This magnetic mount will allow you to measure any axis from any point without a printer specific mounting solution. This is designed specifically for the KUSBA adxl345 accelerometer. You will need to pause your print before the hollow…
This print allows for resonance compensation tuning using the KUSBA on the Creality Ender-3 S1 with large cooling mods such as the Taurus V5 installed. You will also need: 2x M3x8 screws (replaces the stock M3x5 screws; holes are not…
KUSBA and Fysetc Accelerometer mounts for Mosquito hot ends , mount directly to the 25mm fan
this is a spool holder
Verbinder, um Möbel im Wohnmobil ohne Haltewinkel zu konstruieren. 25mm Durchmesser und nur 7,5mm hoch, um auch in 9mm Platten eingebaut werden zu können Abdeckung ist noch etwas tricky... Gedruckt in ASA 0.2, 3 Perimeter, 3 Top/Bottom…
A basic mount for the Input shaper KUSBA designed by Isik et al. This mount is for Eva carriage 3.0 have not tested on Eva 2. Requires: 4 M3x8 bolts Printed in ABS if printed is enclosed or prints with high temperature but can be printed…
