247 modeli
Der Schaber kann ohne Support gedruckt werden. Die Dateien sind für den Druck mit PETG optimiert, andere Materialien sind auch möglich. Zur Befestigung der Klinge am Griff werden 2 M3 Quadratmuttern und 2 M3x12mm Inbusschrauben benötigt.…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Name says it all. This mount can use either screws or some form of tape (e.g. Command strips). I made this to test out Onshape. In testing, the mount should give a bit of room for the switch, and you can put the switch either way in the…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
Important: This fits only the GbE Version, also called: USW-Flex-Mini This is a simplified version of the unifi usw flex wallmount. It is simplfified for easier printing. Print on the flat side! (mounting holes touching the print plate)…
Dies ist wie der Name schon sagt ein Auswurf Behälter für den Bambu Lab X1C/P1P/P1S
An unofficial wall/table mount for the Ubiquiti Unifi USW-Flex-Mini 2.5G 5. It can be either screwed in place with two M3 screws or attached with double-sided tape. I have included Three versions of this model. Open mount: Uses less…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press the a little so they can compress and enter the mount, after…
Basic 19" rack mount ears for Ubiquiti Networks Unifi Pro Max 16 switch Should fit both the non PoE (USW-Pro-Max-16) and PoE (USW-Pro-Max-16-PoE (180W)) variants. Printed with generic PLA-CF, 3 walls and 50% infill on a BambuLab X1 Carbon.
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-2.5G-8-PoE switch. Add this switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have…
A modular, 2-part, 19-inch rack mount adapter for the Ubiquiti Unifi USW-Flex-2.5G-8-PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A 10-inch rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. To install your switch to this mount, simply slide it in. But once you reach the rubber feet on the bottom, press them a little so they can compress and enter the…
A 10-inch rack-mount adapter for the Ubiquiti Unifi USW-Ultra. I've added the .step file if anyone wants to remix the model. Do you like my models? Consider buying me a coffee ;) Print Settings Printer Brand: Anycubic Printer: Custom Mega…
We ordered a bunch of the Unifi USW Flex Mini switches for use around the office, but they didn't come with a wall mount...so I designed and 3D printed my own. Printed it in both Prusa PLA and PETG with .20mm layer height on my MK4 and…
A 19-inch, 2-part, modular rack mount for the new Ubiquiti Unifi USW-Flex-Mini 2.5G 5. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-Mini. I have included two versions of this mount: For two USW-Flex-Minis For a single USW-Flex-Mini To install your switch to this mount, simply slide it in. But once you reach the…
Ausweishalter für Werksausweis, YubiKey und Schlüssel #badgeholder #yubikeyholder #keyholder Drucker: DeltiQ2plus TRILAB Düse: 0,4 mm Layerstärke: 0,2 mm Filament: smartmaterials3D YouTube Video: Making of Version 11: Erhöhung der…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Remix of the Open wall mount with tabs added at the bottom to allow for vertical mounting.
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
From the original upload: I designed this 1U rack mount for the Unifi USW 16 Lite POE switch which fits the standard 19" racks with a depth of under 8 inches. The screw holes on the back are for M4.5x.75 as those were the spare screws I…
This is a sturdier remix of a previous model. I have also uploaded the Fusion 360 file in case you want to alter on the design. Update #20230403: uploaded a version with DIN rail mount on its side.
Updated to V2 (Shown in CAD screenshot - pictures are the V1 design) - Changes include: Modified front with slightly thicker face/lip for increased rigidity Additional material creating a vent slot for fan intake and increased rigidity…
Remix for the USW-Flex-2.5G-5. Unifi Switch Flex Mini 2.5G Modell For all the people which upgraded from the 1gig Model and wants to use the same mounting holes. Print as you want all options are fine
Unifi USW-Lite-16-PoE 1, 1/3U 10" Rack mount. Printed i PET-G. Disable skirt in Prusaslicer or else it wont fit. You will need a M5 screw for the hole in the back
USW Flex 2.5G-8-POE (212.9 x 99.4 x 33.5 mm) USW Flex 2.5G-8 (212.9 x 76 x 33.5 mm) both model share same wide and height, so it can use same rack for USW Flex 2.5G-8 just print adapter (small green one in image) and you can use M3 screw…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
UK: Google Translate Bracket for Ubiquiti USW-Flex-Mini 5 Port Switch The bracket is centered both ways, so that the holder and locks can be welded firmly, but no more than it can be easily clicked out again, and at the same time it is…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-16 PoE. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Parts 4x M4x10 or…
A modular, 2-part, 19-inch rack mount adapter for the Ubiquiti Unifi USW-Flex-2.5G-8. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
It’ll be a cold day in hell before I waste my precious PLA on support material. After countless iterations, I’ve nailed it—a snug, snap-fit under-desk mount for the Ubiquiti USW-Flex-Mini gigabit switch. Prints in 37m51s on my P1S, using…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-2.5G-8 switch. Add this switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have…
remix from 6.5 inch rack i dont have device to test this print, use at your own risk My print settings layer height: 0.2 wall: 3 infill: 15% If you enjoy my work, please consider support at link in profile. Change Log 2025/03/11 change…
Since I was never able to find a rack mount for this switch, I designed my own instead. Print this with the front facing down and no supports are required. Please excuse the low quality print. I broke my hotend yesterday and haven't tuned…
Update 2024-10-05: I finally got the switch and my original print didn't fit exactly right. So I made a modification to the curve of the main body holding the switch. It should work now. New photos uploaded. Remix of:…
remix from 6.5 inch rack If you enjoy my work, please consider support at link in profile. Change Log 2025/03/11 change name 10 inch USW Flex 2.5G-5 with Patch Panel A > 10 inch USW Flex 2.5G-5 right label 10 inch USW Flex 2.5G-5 with…
Un support pour visser dans votre rack le Unifi USW switch flex mini
Added holes according to the DIN rail clips from the Voron Project( https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl ). M2x10 Self-tapping screws are required.
This holder has a very tight fit (it is supposed to be like this) so that you can attach cables from below without the switch slipping out. This model uses the T-Clip System to fix the tray to your SKÅDIS board.
Unifi USW Flex Mini Switch Stand for fixed pad Stojánek na Unifi USW Flex Mini Switch
This design uses metal rack ears and heatset inserts to make a more durable Rack Mount for the USW Pro max 16 PoE. The Right side PSU files for the PSU can be mirrored and installed on the left if youd perfer the ports to line up with…
Unifi Switch Lite 8 port POE based on remix of Unifi Flex XG power Brick wall mount by RockNLol I just resized model to adapt to power brick of the switch (115% bigger)
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws betwen : ISO 10642 (DIN 7991) M6x20 + Square NUT M6 10x10x3 I used PETG.
A modular 19-inch rack-mount adapter for the Ubiquiti Unifi USW-Ultra. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out…
Remix of model by Paul-Vincent Roll. Made to be mountable on regular wall with screws instead of on pegboard.
A modular, 2-part, 19-inch rack mount adapter for the Ubiquiti Unifi USW-Flex-Mini. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
Remix of Vietnam Airsoft's AAP01 USW kit. Tolerances of the original kit were too tight to be printed. Credit goes to Vietnam Airsoft for the original kit
I took the existing model and added a hole that fits the USB-C power connector and a keystone jack to clean up how it looks in my rack. Keystone is very useful for passing Ethernet back to another device, in my case my Eero router that's…
Halter der Fräser 8mm Mit und ohne Löcher Router bit holder 8mm With and without holes
An under-desk mounting frame for an Ubiquiti UniFi USW-LITE-8-POE switch. Printed with PLA filament and support structures only in the relevant places. Temperatures, Speed and Material Filament: PLA Printing speed: 120,0mm/s Layer…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Flex-XG. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out…
The Kubuswoningen (Cubic houses) One of the most iconic spots in the city of Rotterdam, The Netherlands. The design is stackable so you can print a whole set of houses or combine it with other hexagonal designs (tiles, coasters..). Easy…
A mount for the Ubiquiti UniFi Switch Flex XG (USW-Flex-XG).
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-XG 10G switch. Add this sweet 10G switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here .…
Combination of two models since I replaced a USW-Flex-Mini with a USW-Flex and wanted to use the same screw holes.
USRockets did an amiazing job on R2D2 that I have whipped up several heads, I have sucessfully printed this and will post pics of the finished painted model soon. Other components can be found here…
I couldn’t find a good free STL GoPro mount for the USWE hydration pack, so I made my own. This adapter attaches to the USWE NDM strap, perfect for recording POV footage while riding, enjoy! Print Settings printed with a 0.4 nozzle, 0.2…
Based on Unifi USW Flex Mini Wall Mount - simplified. Adjusted to fit the Unify USW Flex Mini 2,5G
Ich hab die Idee aus dem Netz mal aufgegriffen und für den deutschen Perso angepasst. Das ist mein erstes Modell also bitte seid gnädig. Für Anregungen, Verbesserungen und berechtigte Kritik bin ich sehr dankbar. Leider konnte ich das nur…
Uses the skadisnut system: https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards Uses 2.5mmx12mm screws
Top loading and slightly more structurally robust/rigid remix of Alex's model.
Simple rack brackets for Ubiquiti USW Pro Max 16 PoE including power brick support
This model is based on the one by Pete Edwards and includes heat insert spots, so that it can be used like the original mounting brackets. I included some holes to suit M3x5x4 heat inserts, in just the right spot to use the mounting…
For the lack of mounting points on the Unifi Flex Mini switch I designed this simple wall mount case. It exposes all ports. Print it as is without support. I used a 0.2mm layer height. Mounts to the wall with 2 smaller screws.
(DE) Einkaufswagen-Chip im “112 Feuerwehr ” Design, nicht nur für Feuerwehrleute! Passt optimal in den Einkaufswagen und lässt sich nach der Entnahme des Wagens sofort wieder aus dem Münzschlitz ziehen. Sehr sehr schneller Druck und trotz…
Remix of the original USW-Flex-2.5G-8-PoE 19-inch Modular Rack Mount with an extended lower-front bar. This allows you to use the original wall-mount included in the box with the switch to lock it in the rack and prevent it from sliding…
A minimal friction fit wall mount, designed to hug the Ubiquiti Flex Mini switch perfectly. The switch's rubber backing provides for an excellent friction fit. Mount with the tip of the teardrop downwards (added to optimize for FDM…
This model allows for the horizontal or vertical mounting of the Ubiquiti USW Flex Mini network switch in a Leviton Structured Media enclosure. In the horizontal orientation, the switch can be inserted ports up or ports down without…
Eine kleine Düse zum besseren dosieren des Silikon, Klebers oder was auch immer. Passend für die meisten herkömmlichen Silikontuben, Klebertuben wie Pattex etc.
Can be printed with minimal supports, normal layer heights and whatever filament you want.
Lustige Hülle passend für einen deutschen Personalausweis in Batman-Optik Druckzeit ca. 3h mit Bambu P1S PETG HF + Baumstützen
Wall Art Silhouette of the Lamborghini Urus. Adjustable size. I accept model suggestions or ideas you have.
Mount to keep the Lite 8 PoE and Flex XG power bricks organized and tidy in a structured media enclosure.
Printed in PLA. There are overhangs that may need a bit of cleanup where the part attaches to the switch. It is a snug fit like the original.
I designed this out of necessity because I threw away any mounts that came with my switch originally, then much later decided I wanted to mount my switch on my network wall. My switch is the 16 port variety; I don't know if this mount…
A 10-inch rack mount for the Ubiquiti Unifi USW-Lite-8 PoE. This is a version of model 1015913 with less print material.
After receiving my Rapt V2 slider, I was looking to make it slightly quieter. I designed these to be printed out in TPU at .2mm. With the maker's approval, I'm posting these here for others to print out at home. There are 2 styles of…
A 6-inch rack mount for the Unifi USW-Flex-Mini. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings Rafts: Doesn't…
Custom wall or rack mounting bracket for Ubiquiti UniFi USW Flex 2.5G 8 PoE, inspired by the original wall mount design. This version is slightly narrower (5 mm) than the stock bracket for a improved fit. It requires a bit more force to…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti UniFi Switch Ultra from the Blank Module The module will also work for USW-Ultra-60W and USW-Ultra-210W The ESRack system includes…
Das ist ein Regal Einsatz für die Einstiegsmodelle der Trigano Gruppe (Challenger V114, Forster, Chausson, usw.) Damit ist es möglich den Stauraum im Bad deutlich effizienter zu nutzen. Am Besten in PETG oder mit einem anderen…
I found an excellent wall mount for this compact switch and remixed it with two changes: a taller body so the switch sits more securely, and slotted screw holes instead of round ones to give a little more wiggle room during installation.…
Wandhalterung für den Unifi USW-Flex-Mini 5 Port Switch 3mm Löcher für die Wandmontage 0,16mm - Layer 20% - Infill Ohne Supports
LSS (Long Story Short): Shelf for Unifi UX Gateway/Wifi and Unifi Flex Mini 5 port switch. Printed in PETG (Prusament) 0.30mm (draft) 2 perimeters 30% gyroid infill Stand designed to print upright with flat side on the bottom. (tree…
Organizer für 49 Farbfläschen bis 25,5 mm (Bohrung 26 mm) Durchmesser. Materialverbrauch ca. 250 gr. Druckzeit mit dem bei 0,16mm Layerhöhe ca. 9,5 Std
A 6-inch rack mount for the Unifi Unifi USW-Flex-2.5G-5. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings Rafts:…
DIN Rail Clip Mount for Unifi USW Ultra 60W This is a custom DIN rail mount designed for the Unifi USW Ultra 60W . It may also be compatible with other Unifi USW Ultra series switches. Features Attaches using the original mounting plate .…
Fits in the top position of the 10 inch mini rack from Geeekpi
Mod10 Rack Mount for Ubiquiti USW-Ultra A 10-inch rack mount for the Ubiquiti UniFi USW-Ultra, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @Mauker's design with improved tolerances,…
Wall mount for USW Flex Mini Switch
Ersatzgriff mit einem Lochdurchmesser von 25.7mm
Closely designed after the original rack mounting kit - but 3d printable and not metal and thus readily available for a fraction of the out-of-stock price. It isn't perfect, but it is good enough. I printed it flat with regular PLA and…
Remix from 10 inch rack Unifi USW Flex Mini 6.5 inch rack Raspberry Pi more info and front plate for rpi check in source link i dont have device to test this print, use at your own risk My print settings layer height: 0.2 wall: 3 infill:…
Mounting option for Unifi USW Enterprise 8 PoE for a 10inch rack. May not work with all 10inch-racks since the switch is actually behind the mounting rails, that is why it also has to be 2U high. I had this model designed and printed for…
Remix of the original bracket to support the Multiboard with the ability to be swapped without removing the pegs. Requires a few supports, but the automatic supports should be enough.
Kann wie auf Bild 4 gezeigt ohne Stützen gedruckt werden. Für besseren halt am Fahrzeug einfach Schaumstoff an der Oberseite anbringen.
I made it thinker and wider. Also the “curve” have not matched perfectly the housing. STEP are far better for modification, so here is my STEP file I printed it with Ninjatek Armadillo
Mount for the Ikea Skadis system to mount a Unifi USW Flex 8 port PoE switch. M3 countersunk screws are used to the mounting.
Remixed to make the holes work with M3 Bolts. Used four M3*10 for the back plate, added a spot for an M3*30 and a nut for the frame connection. Thickened the slots on the main frame to make it a little more snug. These two changes really…
I'm sure there are people which replaced their UniFi Lite 8 PoE (USW-Lite-8-POE) with the newer Flex 2.5G PoE (USW-Flex-2.5G-8-PoE). However, with that comes a new wall mounting adapter plate which has a different horizontal hole spacing.…
The recent release of the USW Pro XG 8 POE has a lot of people excited due to it's small form factor with 8 10G-BaseT POE++ ports and 2 SFP+ ports. However, the switch appears to run quite hot. Idle temperatures with minimal ports…
