Wyniki wyszukiwania: utp

Sortowanie

250 modeli

P
PrintablesP1xellat3d

Ryobi 18v Power Station (USB-A, USB-C and XT60 outputs)

What is it? This is a Ryobi Power Station, which turns your Ryobi ONE+ 18V batteries into a portable power source. Outputs include: XT60 (adjustable via buck converter on top); and USB-A / USB-C , supporting: (QC4+ / QC4.0 / Huawei…

Wydruk około 12,23 €–14,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
110
Polubienia
47
Ocena
4
P
PrintablesPilote NEXUS

Tarmo 4 Output bell housing upgrade

I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car. I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power…

Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu

Pobrania
25
Polubienia
7
Ocena
0
P
Printablessunset3d

Articulated Spirit Dragon_ Dragon_No Support_Easy Output_Print at once

If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…

Pobrania
92 808
Polubienia
13 801
Ocena
4,88

Stay-on Reusable Cable Tie in TPU. For USB, HDMI, DP, UTP and Power cables and more

It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…

Pobrania
3512
Polubienia
1028
Ocena
5

Cable Tie for USB, HDMI, DP, UTP and Power cables and more...

There are tons of cable ties to download, but none of them check all my boxes. I wanted a cable tie that can stay on the cable if desired, is easy to use, easy to print, and costs minimal filament. So I ended up designing one myself. This…

Pobrania
1418
Polubienia
483
Ocena
4,53
P
Printablessunset3d

Articulated Spirit Dragon_Flexible Dragon_No Support_Easy Output_Print at once

If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…

Pobrania
1379
Polubienia
321
Ocena
4,67
P
PrintablesJensiboy

UTP/Ethernet Cable Wall Clip

Update: Added x2 and x1 clips Simple wall clip for UTP/ethernet cables reuploaded from Thingiverse , original design by Agustin_Pulido

Pobrania
1215
Polubienia
683
Ocena
4,78
P
PrintablesAllpa

Milwaukee M18 Heavy-Duty battery holder (High Demand & Forge) // Milwaukee M18 Akku-Halter (High-Output & Forge)

Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…

Pobrania
978
Polubienia
97
Ocena
5
P
PrintablesNygaard Design

Outpost 42 (Terrain)

Outpost 42 is a terrain piece that can be used as an aesthetic or as part of a scenario. Support: Outpost42_Railgun.stl Communications Dish_Outpost42_Arm.stl Recommended to print with bottom side towards buildplate and “support on…

Pobrania
665
Polubienia
144
Ocena
4,67
P
PrintablesWill Pierce

Milwaukee M18 Battery Holder (High Output Compatible)

Remixed to fit larger/high output batteries. Also removed all but two screw holes. 6 holes just seemed a bit overkill.

Pobrania
437
Polubienia
40
Ocena
5
P
PrintablesMrJuan

Wallmount UTP cable holder

ENGLISH: A simple UTP cable mount holder (with easy cable dettachable) with screw fixation. Internal diameter: 6.2 mm SPANISH: Un sencillo soporte para cables UTP (con cable fácilmente desmontable) con fijación mediante tornillos.…

Pobrania
414
Polubienia
182
Ocena
5
P
PrintablesMartyTheMcFly

Upgraded Output Shaft for The 4 Speed "Constant Mesh" Manual Transmission

This was my favorite manual trans that I could find online, to 3D print. But it isn't the smoothest. The crank was just a square, so the clutches rotate with it. Bu t the round holes for the output gears, through a square peg, made it…

Pobrania
401
Polubienia
58
Ocena
5
P
Printableskaje

Laser Printer Paper Delivery Output Tray Assembly for HP P1006 (and others)

This is the upper tray for a small laser printer (see photos). This tray will probably work with the following laser printers : HP P1102 P1102w P1102s M1536 P1005 P1006 P1007 P1008 P1106 P1108 P1107 This is not an exact copy, of course,…

Pobrania
334
Polubienia
30
Ocena
5
P
PrintablesSkopCZa

UTP cable holder with clip and screw holes

Design based on Bishop1980 cable organizer - I have just added clip, hinges and a few tiny tweaks. Original - https://www.thingiverse.com/thing:3499461 No supports required (at least with PETG) Print Settings Printer Brand: Creality…

Pobrania
327
Polubienia
47
Ocena
5
P
Printablest3chguy

SSUPD Meshroom display output bracket DP + DP + HDMI

Uses 1 ADT-Link A7-A8Q HDMI 2.1 15cm Extension and 2 ADT-Link P7A-P8T-BL DisplayPort 1.4 15cm Extensions. Onshape Link

Pobrania
302
Polubienia
23
Ocena
5
P
PrintablesUdo's 3D World

Modular SciFi Outpost - Corners

I created terrain pieces to create a modular outpost for 28mm wargaming, compatible to my other SciFi / Gothic ruins: https://www.thingiverse.com/thing:2977213 https://www.thingiverse.com/thing:2977220…

Pobrania
297
Polubienia
59
Ocena
0

Fluval FX4 FX5 FX6 Soft flow output bar (vertical and horizontal versions)

Replaces the stock output of the fluval FX for a more uniform, less direct flow. Perfect if you have fish that don't like too much current. Available in strait or 90 degree version. Only tested on my FX4, but should fit the other FX…

Pobrania
294
Polubienia
27
Ocena
0
P
Printables2beers

SSR DIN rail mount (SSR Hutprofilschienenadapter)

This is a adapter for ssr-40 DD to mount on a DIN rail Printed: ABS 20% infill M4 screws 10mm and nuts for ssr mount to adapter M3 screws 20mm and nuts for mount adapter to DIN rail ssr cover: http://www.thingiverse.com/thing:1001385…

Pobrania
289
Polubienia
22
Ocena
0
P
PrintablesUdo's 3D World

Modular SciFi Outpost - Basic Walls

I created terrain pieces to create a modular outpost for 28mm wargaming, compatible to my other SciFi / Gothic ruins: https://www.thingiverse.com/thing:2977213 https://www.thingiverse.com/thing:2977220…

Pobrania
289
Polubienia
49
Ocena
0
P
PrintablesUdo's 3D World

Modular SciFi Outpost - Towers

I created terrain pieces to create a modular outpost for 28mm wargaming, compatible to my other SciFi / Gothic ruins: https://www.thingiverse.com/thing:2977213 https://www.thingiverse.com/thing:2977220…

Pobrania
287
Polubienia
50
Ocena
0
P
PrintablesUdo's 3D World

Modular SciFi Outpost - Gate

I created terrain pieces to create a modular outpost for 28mm wargaming, compatible to my other SciFi / Gothic ruins: https://www.thingiverse.com/thing:2977213 https://www.thingiverse.com/thing:2977220…

Pobrania
279
Polubienia
50
Ocena
0
P
PrintablesTocache

Case for USB boost buck converter with adjustable variable voltage output

I bought an USB variable voltage regulator from Aliexpress (source: https://www.aliexpress.com/item/33008113832.html ) and designed a case for it using Autodesk Fusion 360 Print instructions Category: Electronics Print Settings Printer…

Pobrania
254
Polubienia
30
Ocena
4,75
P
PrintablesOuwekaas

Cable clamp 6mm UTP cable

Another cable clamp, why not. For 6mm UTP cable. I used PETG, I guess PLA will break too easily. Support, that's your own choice. And use 3mm diameter screws to mount the clamp. Have fun.

Pobrania
224
Polubienia
34
Ocena
4,25
P
Printablesdziobu

Bestway pump input/output covers

It's smaller version of original giants (look at photos). Print with PET-G.

Pobrania
211
Polubienia
42
Ocena
5
P
PrintablesXargas

Anycubic Kobra 3 Max - 8-input and 1-output addition

When testing printing with ACE Pro I found that the original extension from https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-max/8-input-and-1-output-module was not as stable as I was hoping for (without using e.g. metallic tube…

Pobrania
203
Polubienia
24
Ocena
0
P
PrintablesMarin

PARKSIDE X20V_Team Battery connector with DC output 5.5*2.1mm connector

Update: January 13, 2022 added details for better finger grip. This is another version of DC output power connector 5.5x2.1mm holder. To get connected on a Parkside battery, you need any of these two: 70578-parkside-x20v or…

Pobrania
197
Polubienia
23
Ocena
4,67
P
PrintablesKrashone

Output Paper Tray for HP 1018

In considerazione che mi si è rotto in ufficio il supporto per la carta di una stampante HP 1018 ho pensato bene di provare a riprodurlo, per adesso questa è una prima versione ancora da migliorare. Sono presenti: Copia 1:1 Con scritta HP…

Pobrania
190
Polubienia
6
Ocena
0
P
Printablesparalepsis

Outpost 6: Building for 28mm Gaming

Outpost 6 is a building for use in 28mm wargaming. It was inspired in part by the great terrain examples shown on the Maelstrom's Edge web site . Dan Newman's Inkscape to OpenSCAD converter and Greg Frost's bevel extrude were both used in…

Pobrania
187
Polubienia
41
Ocena
0

Wall Hole Starlink UTP Cable Routing Grommet

A simple Wall Hole Starlink Cable Routing Grommet I created. Very useful to install UTP cables through the wall. Available in two versions, one for 20mm hole and the other for 18mm hole. You need to print it with a flexible material, 3 or…

Pobrania
181
Polubienia
28
Ocena
0
P
PrintablesSMACKMAX_

Insect city: Urban Insect Outpost

Due to the decrease of flora, insects have to resort to stealth outposts to rest during their urban missions. No supports needed The design has 2 holes of 4,5mm for securing it to a surface, the holes are covered with 1 layer of 0,4mm to…

Pobrania
178
Polubienia
164
Ocena
5
P
Pobrania
172
Polubienia
24
Ocena
5
P
Printablesdp studio

UTP/FTP Rubber Grommet Weather Seal for outdoor Security Camera / Junction Box

UTP/FTP Rubber Grommet Weather Seal for outdoor Security Camera / Junction Box The cut is thinner than the standard nozzle diameter, so you may need to use a cutter after the print is done. Use flex filament. Tested on a Hikvision…

Pobrania
169
Polubienia
69
Ocena
5
P
Printablesdrops

Paper output tray for HP printers

Replacement for part numbers RC2-9441, RM1-7498-000CN

Pobrania
167
Polubienia
6
Ocena
0
P
PrintablesFootlong

2.5 Inch Output Funnel for Rollsizer

Bench mountable funnel for directing brass output from Rollsizer into bucket using 2.5" flex hose (avail at RangePanda). I needed a rectangular funnel that I could attach to my bench that would catch brass ejected from my Rollsizer into a…

Pobrania
164
Polubienia
16
Ocena
0
P
PrintablesLukáš Ráček

UTP cable stripper

My small version of UTP cable stripper. Blade for stripper is 9mm.

Pobrania
150
Polubienia
24
Ocena
5
P
PrintablesHeatbreak

UPS box with XT60 E-F output - For LX-2BUPS - sliding lid.

Printed with 0.2mm layer height and Elegoo's cheapest PLA. The UPS board clips in without tools. Place the USB end in first and push down other end to clip in. If you need to remove the board, you may have to remove the xt60 connector and…

Pobrania
150
Polubienia
17
Ocena
0
P
PrintablesNemo404

Neje 40W A40640 (15W output) laser module air assist nozzle

I made 4 versions for different focal length settings.You should use some rubber ring for sealing from the laser side (red circle on picture) Air input diameter is 5.4mm My air source - 2x CT-404 silent aquarium air pump…

Pobrania
149
Polubienia
19
Ocena
0
P
PrintablesChris

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs prints best with barbs facing toward the build plate (& can likely print without supports)

Pobrania
133
Polubienia
18
Ocena
0
P
PrintablesThebestcatever

90 degree gearbox, 1:1 ratio, .5in hex input/output

Only hardware needed is 4 1in long #10-32 bolts. For assembly, first put the bevel gears into their slots in the case. next, slide the hex shafts into the bore in the gears, and finally bolt the top plate onto the main casing). Ill post a…

Pobrania
125
Polubienia
11
Ocena
0
P
PrintablesKo T

UPS box with 5.5mm DC socket output and switch - For LX-2BUPS - sliding lid.

Remake of original model for rocket switch 21x15 and 5.5 socket

Pobrania
122
Polubienia
13
Ocena
0

Soft flow output bar for Fluval 107 - 207

Lets you replace the original output pipe of the Fluval 107 or 207 to a small soft flow bar.

Pobrania
118
Polubienia
17
Ocena
0
P
Printablesdjjame

2004-2011 Ford Focus Output Shaft Seal Installer - CV Axle

When changing a CV axle in a 2010 ford focus I damaged my axle seal. I thought this would be an easy swap, but little did I know Ford used the worst seal design I've ever seen. After trying 2 times and ruining 2 seals, I looked online for…

Pobrania
116
Polubienia
8
Ocena
0
P
PrintablesKlikini

FLUVAL AquaClear 50 output surface barrier

Floating plants (like Duckweed) getting caught in the filter outflow causes them to get flung into the water, where they usually get sucked up by the filter. This solves that by keeping them away from the waterfall. Additionally, it…

Pobrania
113
Polubienia
16
Ocena
0
P
PrintablesMartin P

Clip to wall - Speaker cable, UTP, USB, Ethernet, power plug ...

Clip to wall - Speaker cable, UTP, USB, Ethernet, power plug ... I recommended print from PETG because of flexibility a and dirability Bottom port is for cable up to 7mm, rest of holder up to 6mm Happy print

Pobrania
110
Polubienia
17
Ocena
0
P
Printablespeterviszt

Cat5e UTP/Ethernet cable clip with screw holes

This is a small modular cable clip / cable comb designed for Cat5e UTP cables with an outer diameter of around 5 mm . The cables snap into the clip nicely and are held securely, making it useful for keeping network cables, low-voltage…

Pobrania
110
Polubienia
33
Ocena
0
P
PrintablesTinkerers Cove

Black Spire Outpost - Challenge Spira full collection - Castmember gifts

Designed as a Challenge coin so that one side is always Black Spire Outpost while the 'face side' can be set to a matching faction. First Order and New Republic sides are easy to match to their respective camps while the Fulcrum and…

Pobrania
107
Polubienia
35
Ocena
5
P
Printablesblade42

Dillon Reloading Output Chute

Output chute for Dillon reloading presses. Connects to a 1.2x16mm spring - works great with 9mm. I haven't tested with anything larger. I've also added one which uses a 1.6x20mm spring. Best printed with the pointy end up like a pyramid.…

Pobrania
105
Polubienia
16
Ocena
5
P
PrintablesDismike

Pocket Outpost

Teaser video: https://youtu.be/vJn5NvjVAy0 POCKET OUTPOST is your key to the stars. As a brave explorer, you establish outposts on moons, found colonies on foreign planets, and discover unknown resources on asteroids that need to be…

Pobrania
100
Polubienia
27
Ocena
5
P
Printablespstimpel

Benchtop DC Power Supply with 2 adjustable outputs

Update: FrontV2 maintains the 0.75 inch distance between binding posts I was in need of a reliable power supply for my maker space. I need two adjustable outputs, constant voltage/current, and voltages from 3.3 up to 30 V. Having 5A was…

Pobrania
93
Polubienia
10
Ocena
0
P
PrintablesFUTPRINT50

FUTPRINT50 Hybrid-Electric Regional Aircraft Model

The resulting aircraft model will have the following dimensions: 49 cm x 56 cm x 22 cm (L x W x H). The parts need to get glued together. All separate parts have small holes to fit dowel pins (3 mm x 10 mm) for alignment. -------- This…

Pobrania
90
Polubienia
10
Ocena
0
P
PrintablesiDkwiD

Elegoo Neptune 3 / 4 mini drawer power output side

ELEGOO Neptune mini Tool Drawer perfect for the power supply side on the neptune 4 & pro. However, be careful when insert it and what item u put inside because the power supply is right behind it. 2 versione: 1 secret and other with…

Pobrania
90
Polubienia
20
Ocena
0
P
PrintablesDismike

Pocket Outpost - Expansion Pack 1

Expansion Pack 1: https://youtu.be/N9ImPQT5mb0 With the EXPANSION PACK 1, 13 new components are added to the Pocket Outpost kit. Cargo spaceships, pipelines, rocks and more. Discover entirely new ways to build your outposts. This is part…

Pobrania
87
Polubienia
20
Ocena
0
P
PrintablesJuan Feller

AD5X filament output

AD5X filament output, Correction to the FlashForge AD5X Poop Purge Chute and Bucket model.

Pobrania
86
Polubienia
7
Ocena
5
P
PrintablesHeatbreak

USB PD / QC Trigger box - For CTP10 board - XT60 output

For the CTP10 board which can request various voltages from USB chargers supporting: PD - Power delivery QC - Quick charge FCP - Fast charge protocol AFC - Adaptive fast charge Sorry about how the lid attaches (glue). I doubt I will ever…

Pobrania
83
Polubienia
17
Ocena
0
P
PrintablesSteve Eckerlein

3DSets - 5mm metal output for belted gearbox

Use a M5x45 screw with head cuted, or a treaded M5 rod. You need 2x M5 nuts. Print the output pulley and assemble like 3Dsets manual describe. Cut a M5 rod or a M5 screw to have approx 10mm each side. Threaded rod or screw have to be…

Pobrania
80
Polubienia
22
Ocena
5
P
Printablesrfourb

BMW ZF5 Output Shaft Seal Driver

This is a driver for proper installation of a new output shaft seal. The new seal must be seated to the correct depth within the bore inside the transmission casing. The bore is 13.5mm deep, with a 9mm deep seal. This tool seats the seal…

Pobrania
80
Polubienia
7
Ocena
0
P
PrintablesRadekG

RP2040-Zero Case - 2*UTP cable (ADXL345)

Small case for Waveshare RP2040-Zero (smaller brother of Raspberry Pi Pico) that allows using 2 accelerometers with Klipper - speeds up resonance measurement on bedslinger printers. Needs M2.5x8 countersunk screw and nut. Place for 2…

Pobrania
80
Polubienia
14
Ocena
5
P
PrintablesKnurbine

Mean Well Power Supply LRS-150 IEC Cord, switch, and output terminal housing

This is a simple cover for a Mean Well LRS-150 power supply that will hold an IEC power cord adapter, power switch, and output terminals/plugs. All hardware used to mount the PS and cover is M3. The cover mounting holes are sized for…

Pobrania
77
Polubienia
6
Ocena
0
P
PrintablesBeardedJester

Star Wars Legion Nima Outpost Gate

Modeled after Nima Outpost gate, this is scaled for Star Wars Legion but may need scale adjustment to fit your printer or allow for vehicles to pass underneath. Category: Toy & Game Accessories

Pobrania
75
Polubienia
24
Ocena
0
P
PrintablesPaul Malinowski

PVC Flue Gas Vent Output Cover / Screen

A friend told me that he had wasps make a nest in his furnace vent pipe so I have decided to make a cover for it. I fits a 2" connector as you can see in the pictures. If it's to loose you can glue it in or print 1% larger. Hope someone…

Pobrania
75
Polubienia
3
Ocena
0
P
PrintablesKeepy

UTP LABEL Clip V1

Printed Using Kingroon Orange PLA filament Filament: Kingroon Orange PLA Temperature: 205 °C Printer: Creality Ender 2 Pro

Pobrania
75
Polubienia
9
Ocena
5
P
Printablespjp_innovation

Subaru transmission rear output shaft seal driver

Subaru transmission seal driver for rear output shaft fit 2002 to 2007 6speed and 5 speed transmission. Should fit other years but can't confirm. Confirm for oil seal part number: 806735210 Make sure to use a lot of perimeters and infill.…

Pobrania
73
Polubienia
13
Ocena
0
P
PrintablesDismike

Pocket Outpost - Expansion Pack 2

Introduction Video: https://youtu.be/TQ_tjPChxrg The EXPANSION PACK 2 adds 16 new components to the Pocket Outpost kit. With the new components you're able to build crazy mechs, tanks, spacecrafts and more. Discover entirely new ways to…

Pobrania
72
Polubienia
16
Ocena
0
P
PrintablesChris Mellinger

Connector for Keen One EQ Mounts & Modified Output Plate

This attaches to the original output plate via the M8 nuts. Then it has M4 mounting holes that match the side mounts on the original model. There's just enough space to get a hex wrench in there.

Pobrania
70
Polubienia
4
Ocena
5
P
Printablesrikbrouwer

Wind simulator case for Arduino Nano and 3x PWM fan output

After making and testing a wind simulator for my sim racing rig, I needed a good case to mount the Arduino Nano safely on my rig. I tried to make the case as small as possible, with easy access for 3x PWM fan output and USB-C and 12v DC…

Pobrania
69
Polubienia
16
Ocena
5

RCBS | Dillon | Lee APP Output Chute

Designed for the Lee APP, but compatible with other presses requiring similar Output Chute. Developed by the Reloading & More AD1966 team, the Chute/Funnel features a wide spout to ensure uninterrupted flow, a protective and replaceable…

Pobrania
68
Polubienia
8
Ocena
0
P
Printablesgtorelly

92 mm Fan Duct to 10 x 90 mm Output and 60 mm Height

Duct designed to adapt a 92 mm fan into a dust blower. The design reduces the output dimensions significantly, theoretically leading to faster air speed and focused air flow. It requires a powerful fan with high static pressure, such as…

Pobrania
68
Polubienia
13
Ocena
0
P
PrintablesDalekSec

Simple Box with Screw Lid and 2 Output Holes

Printed in PETG 0.3mm without issue

Pobrania
67
Polubienia
5
Ocena
0
P
Printablesthemacboy

Sunlu FIlaDryer S2 filament output guide

Auxiliary piece to guide the pfte tube through the closing door of the FilaDryer S2, reducing friction with the walls. There are two exit options: · Horizontal, picking up the filament from the top back · Vertical, picking up the filament…

Pobrania
65
Polubienia
4
Ocena
0
P
PrintablesDerik Whittaker

Genius - 16 Output Controller

PSU Mount for Genius 16 Output Controller. There are 2 versions available. MW LRS 350 - Fits standard Meanwell/Generic PSU's MW LRS 600 - Fits thin Meanwell LRS 600 PSU's The design has a in-cut on the bottom to allow for nuts/bolts to…

Pobrania
63
Polubienia
4
Ocena
0
P
PrintablesJoe van Dohn

Prusa MK4S, electronic box cover, USB power output mod

This mod allows you to add a USB power output at the back of your Prusa MK4S. I use it to power my Buddy3D camera directly from the printer. Required Parts M3 threaded inserts x6 25mm M3 bolts x2 10mm or 12mm M3 bolts x6 ( You can reuse…

Pobrania
61
Polubienia
30
Ocena
5
P
PrintablesPastelka

UTP cable holder

holder for UTP cables

Pobrania
61
Polubienia
7
Ocena
0
P
PrintablesYohann C

Audient Evo 4 stand, with front holes for in/output

This is a stand for the Audient Evo 4 XLR interface, with front holes for headphone output and instrument input.

Pobrania
59
Polubienia
2
Ocena
5
P
PrintablesRed Haniwa

XL4015 CC CV buck converter case with space for output diode

Remixed my own design to add space for a diode. This is useful for cases where you leave the buck converter connected to a battery all the time to prevent current back-flow. Category: Electronics

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesJeff Chen

Mini to Full HDMI Adapter for N64Digital No-Cut Mod Dual Output

You need this adapter if you have your Nintendo 64 modded with N64Digital no-cut and you want to output HDMI and analog video at the same (or if you outright hate mini HDMI). Parts HDMI Ports - Buy option C1 and A4, plus a 5cm fpv cable.…

Pobrania
57
Polubienia
13
Ocena
0
P
PrintablesGdalya

Portable Air Conditioner Output Diverter

Why Needed After I mounted the air exhaust passage that came with my Midea MAP08S1XWGR-T , part number 12120600A23603 and extended the exhaust hose to reach it, I found that the air blew straight out the doorway, cooling the next room,…

Pobrania
55
Polubienia
12
Ocena
5
P
PrintablesNicerSlicer

38.8mm-38.8mm-25mm hose coupling with 15mm output/intake (venturi) /Schlauchkupplung 38.8mm-38.8mm mit Anschluss 25mm und 15mm Einströmer

Verbindet 2x 38,8 Schläuche mit schräben Anschluss 25mm unter Verwendung eines 15mm Ram-Einstrümers (ram-intake). Kann in Flussrichtung als Venturi-Luftansaugung benutzt werden oder gegen die Flussrichtung als Ausströmer

Pobrania
52
Polubienia
3
Ocena
0
P
Printablesm_collectable

Star Trek Cardassian DS9 Outpost Base Catan

Created for use in Star Trek Catan board game. The bottom part functions as an "outpost" for the Cardassian race. The top part upgrades to a starbase for an additional victory point. Feel free to check out my other Star Trek related…

Pobrania
52
Polubienia
12
Ocena
0
P
Printableskingmob

JUNG LS990 UTP plate

This is a more or less direct copy of a LS969-1UAWW UTP wall plate that fits inside a JUNG LS 990 frame. I made it as a basis for my unifi AP mount that can be found here and figured someone might have a use for it. Test printed it and it…

Pobrania
52
Polubienia
3
Ocena
0
P
PrintablesBilld

Brother PT-P700 Label Printer Output Catch Tray

I have a Brother PT-P700 Label Printer, it sits on a shelf in my workshop above my bench, but when I print the labels they fall through a gap in the bench to the floor . . . very annoying. Designed this simple tray to catch the labels. It…

Pobrania
51
Polubienia
4
Ocena
0
P
Printablesmulcmu

Cap for pressure washer output

Storage cap to keep insects & debris from pressure washer during storage. M22x1.5 threads.

Pobrania
51
Polubienia
8
Ocena
5
P
Printablesemachestnut

water pump hose adapter - 5 mm output

Simple adapter to interface the output of a small ac water pump to a 5mm bowden tube. Used in a model mill.

Pobrania
50
Polubienia
2
Ocena
0
P
PrintablesSoBaldrickEsq

Sonoff Basic Enclosure - two outputs and WAGO conmnectors

Remixed to add two outputs for mains cables and3 way WAGO connectors. cable holes are 7mm

Pobrania
50
Polubienia
12
Ocena
0
P
PrintablesSpeedy

UTP Cable (popisky)

Popisky pro UTP kabely v domě. Stačí jednoduše nacvaknout na UTP kabel (5,5mm) s možností dodatečného zajištění plastovou páskou. 3mf soubor obsahuje nastavení pro použití dvou barev na jednobarevné tiskárně… (2x Pauza při tisku pro…

Pobrania
50
Polubienia
3
Ocena
5
P
PrintablesHonzal
Pobrania
50
Polubienia
7
Ocena
5
P
PrintablesKreskin76

(UTP) Cable spacer (4)

Can be uploaded for other numbers of cables on request... Next remix: support holes for screws / multiple lines / ... (just post your comments) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…

Pobrania
47
Polubienia
4
Ocena
0
P
PrintablesQw3rtzuiop

Keithley 236 front panel output connectors

This thing allows you to mount 4mm jacks at the front panel of the Keithley 236/237/238 source measure unit. The used jacks are Hirschmann 4mm jacks. http://cdn-reichelt.de/documents/datenblatt/C170/SEB-2610F.pdf The print on the first…

Pobrania
46
Polubienia
6
Ocena
5
P
Printablesdarkponay

SCART connector with cable output on the side

I wanted a SCART connector shorter than the original, and the cable to be routed on the left or on the right. It requires two M3 screws (with or without nuts and washers) I printed it on MK4 with smooth plate, standard 0.20mm structural…

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesKillefit

Endkappe Nutprofil Typ-B 30x30

Endkappe für ein Alu-Nutprofil Typ-B 30x30 Eigentlich ein Cent-Artikel, aber für einzelne lohnt eine Bestellung ja nicht

Pobrania
45
Polubienia
1
Ocena
0
P
PrintablesEdwin

Generic modular UTP and USB cable holder

To keep a network of the laptop from falling off the table I designed this clamp. Also made it a modular piece to be able to hold multiple cables. It works for most cables, USB cables, network cables, audio cables. No supports needed. Use…

Pobrania
44
Polubienia
4
Ocena
5
P
PrintablesHdm

UTP markers

Stop mess in your UTP cables. Combine markes. Easy to print, easy to attach to the cable. For cables with ID 5mm. For better results print up side down. Print instructions Category: 3D Printing Summary Stop mess in your UTP cables.…

Pobrania
43
Polubienia
10
Ocena
0
P
Printablesinteractive3

Bikepacking Blackburn Outpost Cargo Cage Suspension Fork Adpater

I didn't want to make these cages stick out any further than necessary from the fork so I made this adapter and used stainless steel hose clamps to secure the cage to the fork. I put Xpel chip guard film on the fork. I put VHB tape on the…

Pobrania
43
Polubienia
12
Ocena
0
P
PrintablesSimo Apell

Greg's Wade's Accessible Extruder with 5mm output gear axle

This is a remix of Tick007's GWAE to eliminate the need for the 'M8_nut_adapter' This thing includes only the body and the large gear, get the other parts from the original thing. The body needs two 625 bearings and the gear has a pocket…

Pobrania
42
Polubienia
8
Ocena
0
P
PrintablesMatt Richardson

Paint Brush Holder For Cutpot (House Painting)

These are clips I made to hold paint brushes to your paint pot when not in use so they don't tip and fall into the paint. This model is specifically modeled to fit a Sherwin williams paint pot but will probably fit other brands of the…

Pobrania
41
Polubienia
11
Ocena
0
P
PrintablesVadik

Small Outpost - Board game scenery

This is a small piece of scenery designed as a weathered sandstone outpost for tabletop wargames. Offering a bit of cover for the miniatures, or as an objective to hold. Info: Dimensions: 134mm x 134mm x 100mm (without the top cover)

Pobrania
41
Polubienia
4
Ocena
0
P
PrintablesLarry Robreno

GMC/Chevy trans/transfer case rear output seal installer

This is a work in progress Printed it with ABS 60% infill to make sure it was solid enough to handle getting hit with a hammer. If printing on the seal side, which I did, I used organic supports.

Pobrania
41
Polubienia
6
Ocena
0
P
PrintablesJustin Sparks

Fluval Flex Threaded Output Nozzle Bulkhead

I lost the bulkhead for my flex and couldn't find one. Save yourself 10$ and just print this one. I used this nozzle with it. Enjoy. https://www.printables.com/model/819851-fluval-flex-15g-low-flow-spray-bar Supports aren't necessary,…

Pobrania
41
Polubienia
4
Ocena
0
P
Printablesearlmckay

Headphone holder with headphone output (for 3.5 mm jack)

Headphone holder with headphone output for 3.5 mm jack. Click here for the 6.3 mm version. Components you need: 1 x Jack Plug 1 x Jack socket 2 x Screws Cable (diameter about 3 mm) Guide Define holder position and cable length. Plug in…

Pobrania
40
Polubienia
10
Ocena
0
P
Printablesearlmckay

Headphone holder with headphone output (for 6.3 mm jack)

Headphone holder with headphone output for 6.3 mm jack. Click here for the 3.5 mm version. Components you need: 1 x Jack Plug 1 x Jack socket 2 x Screws Cable (diameter about 3 mm) Guide Define holder position and cable length. Place the…

Pobrania
40
Polubienia
13
Ocena
0