Wyniki wyszukiwania: v400

Sortowanie

423 modeli

P
PrintablesSiroko

Flsun V400 Fleximount Final Edition!

English : Correction : access to top usb port cleared. The reworked optimized last version of my first rotativ Speederpad mount. Printed it with Black PLA+. Layer height : 0.2 ; Width: 0.4 Walls : 2 ; Wall ordering : From outside inwards…

Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu

Pobrania
174
Polubienia
18
Ocena
4,5
P
PrintablesSiroko

Flsun V400 mount speeder pad Fleximount

I was desperatly searching for a mobile mount for my speederpad but didn't find any so i decided to build one. The very nice and solid Tower mount clip credited to @YosiYaffe https://www.printables.com/@YosiYaffe was a huge time saver.…

Wydruk około 2,85 €–3,48 € nettoWstępna wycena jednego wariantu

Pobrania
121
Polubienia
6
Ocena
0
P
PrintablesArt3Design

HEXA twisted pot vase / pen holder (also for FLSUN V400)

If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:

Wydruk około 46,12 €–56,37 € nettoWstępna wycena jednego wariantu

Pobrania
63
Polubienia
4
Ocena
0
P
PrintablesArt3Design

FLSun V400 PrusaSlicer Profile

This Projet is WORK IN PROGRESS If you like this project, take a moment to buy me a virtual coffee … To install the texture and printer silhoutte in PrusaSlicer, go to: Settings → Printer Settings → General → Bed shape → “Set…” Load the…

Pobrania
7976
Polubienia
196
Ocena
4,8
P
PrintablesRenanAz

Updated - FLSUN V400 OrcaSlicer Profiles

UPDATED profiles for OrcaSlicer 1.9 and up. ( Download the slicer here ) Sharing some 0.4 and 0.6 profiles for the Flsun V400 using OrcaSlicer. Files are for Vanilla Klipper or Flsun Klipper (only difference is the Start and End gcodes).…

Pobrania
3914
Polubienia
123
Ocena
5
P
PrintablesGuilouz

FLSUN V400 Improved Fanduct

Improved FLSUN V400 Fanduct Note: Fans are glued to stock fanduct but they can be peeled off easily with a cutter blade. Edit 05/11/22: New Fanduct allowing an overhang of up to 70/75° to be achieved

Pobrania
3819
Polubienia
307
Ocena
4,96
P
PrintablesJLCURTIS

V400 Speeder Pad Adjustable Arm Mount

3 spline locking joints Fully 3d printed. Locking taps built in to hold the pad in holder. Will be a snug fit. Recommend Slicing Tolerance set to Exclusive. Frame mount>Arm 1>Arm 2>Pad Holder I would recommend supports on the pad holder,…

Pobrania
2460
Polubienia
164
Ocena
4,87

FLSUN V400 Belt Tension Gauge

Printing instructions: Quality: .12 Walls: 3 Infill: 40 Pattern: Grid Temp: 210 and 60 Speed: 80 print speed and 40 walls No support Raft - Optional Link to the video: Note: I didn't make this model, just uploading it here, since it's…

Pobrania
2341
Polubienia
158
Ocena
4,92
P
Printablesphnxdrgn536

Advanced Cura profiles for FLSUN V400 UPDATED

Updated 1/25/23 I have programmed better cura profiles for the FLSun V400 printer. i am currently needing beta testers to help tweak the default parameters of these profiles Please stay up to date on changes and updates at the GitHub…

Pobrania
2075
Polubienia
72
Ocena
0
P
Printablesjoeworks

FLSun V400 Layer Calibration Test

Use the standard FLSun v400 standard 0.2mm CURA profile with: Wall Line Count = 1 Build Plate Adhesion Type = None PLA G-code file included for the V400 printer. It takes under 8 minutes to print at 25mm/s first layer speed. You can…

Pobrania
1796
Polubienia
87
Ocena
5
P
PrintablesYosi Yaffe

Flsun v400 Speeder Pad Display Holder Upgrade

this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…

Pobrania
1703
Polubienia
107
Ocena
4,75
P
Printablesflux_capacitor

FLSUN V400 golden PEI buildplate texture for PrusaSlicer

This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…

Pobrania
1576
Polubienia
47
Ocena
5
P
PrintablesGuilouz

FLSUN V400 Adjustable Spool Holder

Adjustable Spool Holder for FLSUN V400. No support needed. Necessary : - 4 x M3x20 - 4 x 608ZZ Ball Bearings - Glue

Pobrania
1453
Polubienia
181
Ocena
4,75
P
PrintablesYosi Yaffe

FLSUN v400 Speeder Pad Display Holder

this is a v2 for my previous design Flsun v400 Speeder Pad Display Holder Upgrade after v1 these are the new features to the new design: more robust holding less material better cooling : spacers in the back of the screen more air way…

Pobrania
1299
Polubienia
99
Ocena
5
P
PrintablesJohnJacky

FLSUN V400 Upper Plate Risers

You will need : 6 screws M3x15mm Double-sided tape or Glue PTFE Tube 9cm

Pobrania
1189
Polubienia
122
Ocena
4,64
P
PrintablesTayG0

FLSUN V400 Top Screen Mount

Bracket for mounting the v400's screen/speederpad at the top of the printer. Hooks into the vent holes underneath the logo, and pressure from the screen when inserted helps keep the mount rigid against the top of the printer. These should…

Pobrania
1114
Polubienia
117
Ocena
4,67
P
PrintablesJohnJacky

FLSUN V400 Enclosure (Cut PLA version)

Enclosure for FLSUN V400. You will need: - 2 polycarbonate panels 403x790x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend) - 16 CHC M3x10mm screws -16 M3 stop nuts Door at this link :…

Pobrania
1060
Polubienia
120
Ocena
4,9
P
PrintablesLaguite

V400 spool holder upgrade

Here is a little upgrade I designed for my Flsun V400. The original metal spool holder is a little bit rough. It works well but make noise when the spool is unrolling. This piece is easy to print with so support, It fits perfectly on the…

Pobrania
1039
Polubienia
63
Ocena
4,8
P
PrintablesJohnJacky

FLSUN V400 Top cover (Cut version)

Cut version printable on the V400 or other small printer You will need : 10 CHC screws M3x10 10 stop nuts M3 10 washers M3 There are two versions, one with logo and one without. PLA Eryone Glow in the dark ASA Winkle Black

Pobrania
971
Polubienia
129
Ocena
5
P
PrintablesJames Sieracki

FLSUN V400 Speeder Pad Mount

A single-piece, easy-to-print, holder to mount the speeder pad to the extruded rail of the printer. Pro Tip: Route the cables through the device so it's a little bit cleaner.

Pobrania
969
Polubienia
69
Ocena
5
P
Printablesyoann

Flsun V400 first layer calibration

Pour calibrer la première couche de la Flsun V400 de façon uniforme.

Pobrania
968
Polubienia
62
Ocena
5
P
Printablespan j

flsun v400 cooling

flsun v400 cooling m3*20 =6

Pobrania
939
Polubienia
123
Ocena
5

Longer camera holder for FLSUN V400 v3

Camera holder, bracket for FLSUN V400 v3

Pobrania
930
Polubienia
58
Ocena
5
P
PrintablesWagZ

FLSun V400 Prusa Configs

So here's a config bundle. This bundle includes all the profiles ive made specifically for my stock FLSun V400. It also includes the V400 printer configs as well. The Profiles ive made included some layer heights from 0.1 up to 0.3 layer…

Pobrania
917
Polubienia
82
Ocena
5
P
PrintablesGuilouz

FLSUN V400 ADXL345 Mount

ADXL345 Mount for FLSUN V400. A longer screw is needed to fix it.

Pobrania
898
Polubienia
93
Ocena
5
P
PrintablesMrBlue

Flsun V400 Toolholder

Print with PLA, no support, i printed it with 4 walls. The Gripper is not perfect but holds tight.

Pobrania
879
Polubienia
89
Ocena
4,75
P
PrintablesViking3DK

Flsun V400 Orca Slicer Profile (0.12-0.16-0.2) new V.3.3 with PETG - 05/02/2025

HOW TO INSTALL PROFILES The file includes a 0.12, a 0.16 and a 0.2 layer hight profile. It have been working great for me and have just made some new tweeks and uploaded the newest version (v2.1) New V.3.3 with PETG, PLA+ and SILK -…

Pobrania
840
Polubienia
27
Ocena
0
P
PrintablesGuilouz

FLSUN V400 FYSETC Portable Input Shaper Mount

FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.

Pobrania
798
Polubienia
84
Ocena
5
P
PrintablesChrisCampbell

FLsun v400 Cooling Fans 5015 Adapter

Printed in PLA. Used brass inserts for the supports and the ADXL holder on the fan cover. The back support includes a cutout for insertion of a cable tie if wanted, may or may not fit your cable ties. I used 3mm bolts for all connections.…

Pobrania
764
Polubienia
88
Ocena
4,92
P
PrintablesWagZ

FLSun V400 Anti-oooze Startup code

So the v400 is a great machine. Ive printed a lot of stuff on mine. a lot of BIG prints too.. which is my favorite part! Anyhow, one downfall thats common is the start code on them, because it allows your printer to heat up while sitting…

Pobrania
755
Polubienia
44
Ocena
0
P
PrintablesPreischl 3D

FLSun V400 Prusa Slicer Quality Profile

FLSun V400 – Prusa Slicer Quality Profile Hey maker! 👋 A tested PrusaSlicer profile for the FLSun V400, tuned for high-quality PLA prints at 0.2 mm layer height. Features: Based on Cura standard profiles, manually adapted for PrusaSlicer.…

Pobrania
724
Polubienia
28
Ocena
0
P
PrintablesJon

FLSUN v400 Speederpad Mount

This is a lower profile mount for the v400 speederpad to mount to the chassis rather than on it's (actually really nice) stand. The bare, shaped mount ( V400 Attachment / Mod Starter ) to fit the chassis was by Trayal on Thingiverse:…

Pobrania
716
Polubienia
47
Ocena
4,33
P
PrintablesGuilouz

FLSUN V400 Fanduct for 4010 fans

FLSUN V400 Fanduct for 4010 fans. I recommend this fans (24V Ball 12000RPM) : https://fr.aliexpress.com/item/32798634077.html?spm=a2g0o.order_list.order_list_main.13.21ef5e5b8i2sK2&gatewayAdapt=glo2fra

Pobrania
710
Polubienia
94
Ocena
5
P
PrintablesYosi Yaffe

Flsun v400 tool holder

i have seen a few tool holders for the Flsun v400, i saw 2 different models: https://www.printables.com/model/336836-flsun-v400-tool-caddy https://www.printables.com/model/313252-flsun-v400-toolholder thanks for the ideas i wanted to…

Pobrania
685
Polubienia
59
Ocena
5
P
PrintablesDamiano Erre

FLSUN V400 Enclosure with filter

FLSUN V400 Full Enclusure with filter and fan. INTRODUCTION AND DESCRIPTION The idea is create strong hinges system in order to be printed with all materials, and decrease as soon as possible the holes on the glasses especially in hinge…

Pobrania
649
Polubienia
86
Ocena
4
P
PrintablesMaarten Vlug

Mesh cover for flsun v400 upper plate risers

EDIT 30-01-2023: Added a cover with bigger mesh holes This mesh cover fits in the slots when you use the V400 upper plater risers found here: https://www.printables.com/model/325471-flsun-v400-upper-plate-risers Just press in the cover…

Pobrania
649
Polubienia
64
Ocena
5
P
Printablesphnxdrgn536

FLSUN V400 Webcam Mount

This is a remix of the "Longer camera holder for FLSUN V400 v3" with an added m6 stud for camera mounts.

Pobrania
646
Polubienia
54
Ocena
5
P
Printablessam elliott

FLsun V400 bed indexer

Updated: Increased overall length and tweaked the mounting holes a little bit to have a tighter fit, still not final yet and more updates to come im sure. Need help indexing your round build plate on your FLsun V400? Try this and let me…

Pobrania
641
Polubienia
74
Ocena
5
P
PrintablesMakerMe

Flsun V400 enclosure

Enclosing Flsun V400 is fairly easy because of the extrusion slots on each pillar. I have designed top/bottom caps for the side walls and now I'm working on the door and hinges. How to build the sides: Print 2x the STL and 2x mirrored…

Pobrania
615
Polubienia
62
Ocena
0
P
PrintablesDiplomator

FLSUN V400 Awesome Enclosure

I redesign the Desingn Maarten Vlug, i change everyting and build a nice smoother design wich looks more “as stock” I design and upload several variants. Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like…

Pobrania
606
Polubienia
126
Ocena
5
P
PrintablesRenanAz

Improved FLSUN V400 Fan shroud

This is a fan cover for the FLSUN v400 that is a bit further from the fan (+4mm) and should reduce a bit of the noise. Modified the file to add more structural support to the side-pins and also added a few more slots to enhance airflow.…

Pobrania
590
Polubienia
55
Ocena
5
P
PrintablesYumiko

Flsun V400 Cache trous

Permet de fermer les trous a la base des colonnes, pour éviter que des chose ne tombe. Fixation avec 2 vis M3x10 et 2 T-nuts. Deux version avec le logo Flsun et l'autre sans. il y a un petit décrochement en bas pour que ca rentre dans la…

Pobrania
560
Polubienia
78
Ocena
4,8
P
PrintablesTibor Fulop

FLSUN V400 My Orca profiles !Updated 2024.03.02!

My Orca Slicer profiles can be found in the “ other files ” section. Some model print faster with standard settings. You need to adjust, infill density, support if needed, miniatures has the support settings. Try them if you looking for…

Pobrania
550
Polubienia
19
Ocena
5
P
PrintablesAnthony Rassat

All-In-One Print In Place Flsun v400 Speeder Pad Display Holder

This is a remix of this awesome model : https://www.printables.com/model/375326-flsun-v400-speeder-pad-display-holder-up I replaced filets by chamfers. You can now print without supports :) You can print files separately or directly the…

Pobrania
547
Polubienia
24
Ocena
4,67
P
PrintablesEdWong

Flsun V400 LED Diffuser

Simply clip them on the effector, it will withstand accelerations without any glue or screws or wathever. I used gyroïd infill @10% without testing any other pattern or density. Filament is PLA White Matte from Grossiste3D, it gives a…

Pobrania
546
Polubienia
79
Ocena
4,56
P
Printables3DJake

Cam Mount for GoPro / Webcam on the FLSUN V400

We designed a camera mount for the FLSUN V400. There is a Version for the left and the right front profile. The mount can be simply clipped on the profile. Printed on the FLSUN V400! Find it in our shop here:…

Pobrania
542
Polubienia
50
Ocena
5
P
PrintablesOldCoder

Perforated Upper Plate Risers for Flsun V400

Thought it might be good to have perforated upper plate risers for the V400 for better ventilation. I wrote a little OpenSCAD file to create lines of cylinders as hole punches, and used Microsoft's free 3D Builder to edit the original STL…

Pobrania
538
Polubienia
57
Ocena
4,67
P
PrintablesTayG0

FLSUN V400 Build Plate Guide/Indexer

Guide for aligning (indexing) your v400's build plate. I printed mine with the following settings: 3 Perimeters 3 Bottom Layers 0 Top Layers (top side of print is hidden once attached) 20% Gyroid Infill No supports Installing: Attaches to…

Pobrania
538
Polubienia
57
Ocena
4,88
P
PrintablesJohnJacky

FLSUN V400 Enclosure (ABS version)

Enclosure for FLSUN V400. Due to proximity with the bed you need to print this design in ABS or similar. I made a different design to print it in PLA. You will need: - 2 polycarbonate panels 403x787x1.5mm (thickness up to 2mm but I used…

Pobrania
529
Polubienia
45
Ocena
5
P
PrintablesAntimix

FLSUN V400 PrusaSlicer Profile (Rev 0.21 alpha)

This is a remake of a FLSUN V400 profile for use on PrusaSlicer. The graphics for the plate is from the @CODASYSGmbH_831285 version that was for the SR but I prefer it to others since it has the squared plate that helps in PrusaSlicer.…

Pobrania
525
Polubienia
18
Ocena
0
P
Printablesoeil digitale

WebCam Holder Flsun V400

after looking for several models on the internet of webcam holder and finding nothing. I came to the conclusion in modeling one. I printed it with plain PLA in about 70 min with my Flsun v400. I was inspired by this models:…

Pobrania
524
Polubienia
35
Ocena
5
P
PrintablesGuilouz

FLSUN V400 Stock Fan Cover

FLSUN V400 Stock Fan Cover for replacement.

Pobrania
517
Polubienia
74
Ocena
5
P
Printablesphnxdrgn536

FLSUN V400 pillar base cover

Are you tired of dropping things into the base of your brand new V400 or afraid something might get lost in the opening? This print in place cover snaps securely into the channel at the base of the V400 pillars just below the belt…

Pobrania
497
Polubienia
66
Ocena
5
P
Printablesvenom696

FLSUN V400 Pad Display Holder V2

Simple Holder for FLSUN V400 Display. Holder has a 10° Slope Just needs: 4x Bolt - DIN 912 M3 x 10 4x Nut - DIN 985 M3 - Nut

Pobrania
493
Polubienia
46
Ocena
5
P
PrintablesRuss

v400 Spool Holder Upgrade - Longer

The original version was too short to comfortably hold my Hatchbox filament rolls. Also, the little tabs on the bottom were slightly too close together and it wouldn't snap in to place. Eventually, it would fall off. This new version is…

Pobrania
493
Polubienia
29
Ocena
5
P
PrintablesGrzegorz

FLSUN V400 PEI Textur Profil

FLSUN V400 PEI Textur Profil .svg File Install under Configuration > Custom Printer Profile > Print Bed Profile > Texture/Modell Thanks for downloading in advance and please don't forget to like this modell!

Pobrania
488
Polubienia
20
Ocena
0
P
Printablesphnxdrgn536

FLSUN V400 adjustable arm camera mount for enclosure

This will also work as a general purpose adjustable arm that will mount to any 8mm t-slot extrusion. I recommend printing the bolts with a minimum of 30% infill. 12/12/22: Added filets to mounting plate giving it more support

Pobrania
482
Polubienia
80
Ocena
4,5
P
PrintablesMaarten Vlug

Effector plate Flsun V400

Effector plate for the V400 with all the holes. 99% acurate. Also added the pins. Edit: Also added a .stl with physical thread.

Pobrania
474
Polubienia
30
Ocena
0
P
PrintablesRobert_Klotz

FLSun V400 CPAP Duct

With hardware (4 m3x8 SHCS) this solution should weigh roughly 13 grams. I designed it with the attributes of polycarbonate in mind. - I have only printed it in polycarbonate - If you print it in another material please let me know how it…

Pobrania
463
Polubienia
81
Ocena
5
P
PrintablesDiplomator

FLSUN V400 LED Triangle - Electronic Bay Cover

I design a Electronic Bay Cover with LED Light Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Its a heavy…

Pobrania
443
Polubienia
105
Ocena
5
P
PrintablesSteffen Moeller

Camera mount FLSUN v400

Simpel camera mount for cameras with clip mounts. PETG/PLA

Pobrania
434
Polubienia
23
Ocena
5
P
PrintablesGuilouz

FLSUN V400 Stock Fanduct

Official FLSUN V400 Stock Fanduct for replacement.

Pobrania
427
Polubienia
59
Ocena
0
P
Printables::1/128

Rapid FLSUN v400 Enclosure

An enclosure for the FLSUN v400 printable in ~1.5 hours for all 3 sides. Use what you've got. Don't waste time on 9+ hour prints for an “enclosure.” Zip-ties, heated inserts, glue, it doesn't matter. Take cardboard, plexi-glass, fabric,…

Pobrania
426
Polubienia
44
Ocena
5
P
PrintablesPower

Holder for SUNLU S2 dryer for FLSUN V400

This holder was designed especially for mounting SUNLU FilaDryer S2 on the top of FLSUN V400. This holder is attached to the dryer through standard mounting holes (replace the standard self-tapping screws with longer ones. at the same…

Pobrania
426
Polubienia
50
Ocena
5
P
PrintablesGuilouz

FLSUN V400 Fan Cover for BigTreeTech KNOMI

Fan Cover to support BigTreeTech KNOMI. Easy to print, no support needed. Needs: 2x M3x8 or M3x6 screws to fix support to Fan Cover 1x M3x30 to fix Fan Cover to V400 effector with ADXL mount or 1x M3x25 without. The hole to fix the Fan…

Pobrania
423
Polubienia
74
Ocena
5
P
PrintablesRenanAz

FLSUN V400 Probe Holder - Extrusion fit

This is a remix of the V400 probe holder adding the T nut to fit the unique extrusions in this printer. Remove the top extrusion cover to fit this. You might need to loosen the screws for that extrusion in order to make it fit. This is a…

Pobrania
418
Polubienia
60
Ocena
5
P
PrintablesYumiko

Flsun ADXL345 Fysetc For V400, SR

Permet de fixer le ADXL345 Fysetc comme la sonde de nivellement. Fonctionne pour la V400 et la SR. Prévoir un aimant de 10x20x3mm (moi j'ai simplement coller l'aimant, mais j'ai prévu un trou pour le visser) et 2 vis M3x8 pour fixer…

Pobrania
414
Polubienia
56
Ocena
4,6
P
Printablesbjones673

FLsun V400 Tool Caddy

I haven't seen a good tool holder for the V400, so I though I would build one. This is patterned off of several different models that were floating around for the Super Racer. It's not a remix, as it was built from scratch in SketchUp. I…

Pobrania
401
Polubienia
35
Ocena
5
P
PrintablesLED3D

FLSUN v400 Speederpad Mount Remix v2

I like the original design but there was no tilt in the holder. Added about 10 deg tilt to the holder. Rounded the curves for the brackets that clip on to the V400 frame. Extended the portion of the bracket that has the dovetail receiver…

Pobrania
401
Polubienia
28
Ocena
4,5
P
PrintablesMrBlue

Flsun V400 Purgeline Trashcan / Mülleimer

Ein Mülleimer der aus 2 Teilen besteht, der Halter an sich und der Sicherungsring für den Müllbeutel. Ich nutze ihn für die ganzen Filament-reste die sich bei vielen drucken ansammeln. Print Settings: PLA 4 Walls 4 Bottom + 4 Top Layers…

Pobrania
397
Polubienia
65
Ocena
4,33
P
PrintablesGrzegorz

FLSUN V400 XYZ Test print

Thanks for downloading in advance and please don't forget to like this modell!

Pobrania
392
Polubienia
10
Ocena
0
P
PrintablesChris3D

FLSun V400 enclosure door

Update: under construction! Fixing printspace! Hello dear community, I present you an easy solution to house the chamber of a FLSUN V400 without having to bend the acrylic. All that is required are: • Utility knife or deburrer • 1m…

Pobrania
390
Polubienia
40
Ocena
2
P
PrintablesBlackbird

Fan shroud FLSUN V400

Thank you all the prevous designers for the good idea. It absolutely makes less noise! The models had some minor mesh errors, I also did not like the text but like smooth walls. Took both the existing ideas and largely rebuilt the thing…

Pobrania
384
Polubienia
41
Ocena
5
P
PrintablesYosi Yaffe

Flsun v400 Tower Mount Clip Source

i tried to work with those STL files in Fusion 360 and its next to impossible to work with. i couldn't found any CAD worthy file for the tower mount, only STL. (and if one exist i couldn't locate one) so, i took a paper and copy the exact…

Pobrania
382
Polubienia
34
Ocena
5
P
Printablesflux_capacitor

FLSUN V400 Alien Fan Cover

The hotend front cooling fan shroud of the Flsun V400 has always reminded me of an ethnic warrior mask, or a reptilian or grey alien face. And now it's even more obvious! V400 emblem debadged to make room for the eyes. We don't need it as…

Pobrania
374
Polubienia
40
Ocena
0
P
PrintablesTayG0

FLSUN V400 Pillar Inner Cover

There are already a handful of these, but I wanted mine to blend in a little better with the existing parts of the v400. I also wanted a more robust clip so that I could print mine without any top or bottom layers. The '(Shortened)'…

Pobrania
368
Polubienia
46
Ocena
5
P
PrintablesDieguzzz

Flsun V400 Cura Profile

Ho creato questi profili utilizzando la versione di Cura 5.2.2 per Flsun V400 ed ho ottenuto ottimi risultati. Ho personalizzato flusso iniziale, flusso secondario, modalita combing disattivata, z-hop, ecc. ho diviso 4 profili: Normale…

Pobrania
367
Polubienia
21
Ocena
0
P
Printablestbuske

FLSUN V400 Portable Input Shaper Mount

You can get the FYSETC Portable Input Shaper here: Aliexpress:…

Pobrania
363
Polubienia
41
Ocena
5
P
PrintablesWagZ

FLSun V400 Orca Slicer Settings

Files Can be downloaded at: https://www.thingiverse.com/thing:5984898 I had to upload a link because Printables doesn't allow me to upload the actual Json files that orca uses for their slicer. however thingiverse does allow it.. so thats…

Pobrania
361
Polubienia
45
Ocena
0
P
PrintablesOlleMark

Flsun v400 first layer test

i wanted a first layer calibration when i first got my v400 in december 2022 but there wasnt really a lot deisgned for round buildplates so i made my own. Yes i really took the time to make a render :D

Pobrania
353
Polubienia
25
Ocena
5
P
Printablescarpette
Pobrania
352
Polubienia
42
Ocena
5
P
PrintablesArt3Design

FLSun V400 first layer calibration Ø300

If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:

Pobrania
344
Polubienia
23
Ocena
0
P
PrintablesGuilouz

FLSUN V400 Extruder Guide

Replacement part for extruder.

Pobrania
341
Polubienia
48
Ocena
0
P
PrintablesGrzegorz

FLSUN V400 PrusaSlicer Full Speed (VMax 400 mm/s) Profil included Calibration and Overhang Test

Install under File > Import > Import Configuration If you are satisfied, please give a like. Thanks

Pobrania
341
Polubienia
23
Ocena
3
P
Printables::1/128

FLSUN v400 Extrusion Positive

This is a model of the FLSUN v400 aluminum extrusion. Use this as a way to define attachments for the v400. There is more space in the t-slots, this is safe dimensioning. Several CAD/CAM file formats are included for reference.

Pobrania
334
Polubienia
34
Ocena
5
P
PrintablesMrBlue

Flsun V400/SR - Ringlicht

Dies ist ein 18cm Ringlicht, es sind 2 Versionen vorhanden, eine dünne Version und eine mit mehr Wandstärke. Ich habe die Version mit weniger Wandstärke genutzt und es passt perfekt. Ich habe die LEDs direkt am Mainboard angeschlossen und…

Pobrania
328
Polubienia
89
Ocena
5
P
PrintablesCharles C.

FLSUN V400 Filament Guide

Ok, so I wanted a guide to feed from my dryer to my new V400. There was a simple one available but I did not have magnets. As a temporary solution I used a cable clip with some Bowden tube: https://www.thingiverse.com/thing:5738338 From…

Pobrania
328
Polubienia
40
Ocena
5
P
PrintablesWagZ

FLSun V400 Speeder Pad Mount

Yah so kids.. and small electronics…. need I say more? I couldn't find something that was beefy and easy to make. I didnt want 700 knobs and crap to mess with. If thats your thing, this aint for you. I made and included a mirrored version…

Pobrania
322
Polubienia
35
Ocena
4
P
PrintablesMaarten Vlug

FLSUN V400 E3D Revo Micro (High Flow) + Bondtech LGX Lite extruder conversion

As I really loved the E3D Revo hotend on my Ender and they recently came with a High Flow version, I decided to make a conversion kit for the V400. I admit, it is not cheap and it does not print much better than a Volcano, but it is very…

Pobrania
321
Polubienia
34
Ocena
5
P
PrintablesSteffen Moeller

Gargoyle - upsized to FLSUN v400

A gargoyle from batman. Fits on af FLSUN v400. PLA silke green/blue 200 degrees print 0,4 nozzle 400mm/s

Pobrania
319
Polubienia
62
Ocena
4,67
P
PrintablesManuel Rivera

FLSUN V400 DISPLAY SUPPORT

Bed temperature: 60-65 °C Layer height: 0.16mm Filling density: 15% (gyroid)

Pobrania
316
Polubienia
30
Ocena
4,5

FLSUN V400 Upper Plate Risers Cover

Super sexy cover for your V400

Pobrania
311
Polubienia
30
Ocena
4
P
PrintablesJohnJacky

FLSUN V400 Enclosure (Cut ABS version)

Enclosure for FLSUN V400. Due to proximity with the bed you need to print this design in ABS or similar. You will need: - 2 polycarbonate panels 403x787x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend) - 16 CHC M3x10mm screws…

Pobrania
309
Polubienia
28
Ocena
0
P
Printables3alCubo

Delta First Layer Calibration (FLSUN V400)

The first layer contributes the most to having a successful print. Some problems come when you calibrate initials settings with a squish a paper, it's not enough. The visualization on the FLSUN Speeder Pad settings they do not give…

Pobrania
302
Polubienia
25
Ocena
5
P
Printablesmcpea

FLSUN V400 T-Nut

Its a start for using the rails to make an enclosure or whatever ;) I added the Fusion file for everyone to go on modeling their own rest part.

Pobrania
301
Polubienia
41
Ocena
0
P
PrintablesHezekiel

FLSUN V400 Spool Holder with optional Support

The additional support part is only optional for filament spools up to 1kg, but mandatory for heavier spools (for example 3KG). Thanks to https://www.printables.com/de/model/45153-flsun-qq-qq-s-and-q5-spool-holder for inspiration, great…

Pobrania
300
Polubienia
14
Ocena
5

FLSUN V400 - Antivibration feet - New Version

Hello guys, Antivibration feet for V400 (they also make it quieter). Use the ufficial screws. no other hardware parts needed. For the TPU - 95A part (Morbido.stl) 2 different infill: -Honeycomb 3D 7% -Honeycomb 20% infill (it's solid,…

Pobrania
297
Polubienia
55
Ocena
5
P
PrintablesJonathan Pyles

FLSUN v400 top mount for SUNLU S1 with FLSUN OEM Enclosure

This is a top mount for the FLSUN V400 that will hold the SUNLU S1 at a 15 degree angle so that the FLSUN enclosure can still open with the S1 installed on top.

Pobrania
296
Polubienia
40
Ocena
5
P
PrintablesPadre Čudla

V400 Bed indexer

Edited awesome original design so it can be used withough screws. Tolerance is tight so be careful not to break it. Adding also test part so you can print this if you are not sure that this is for you :) My PLA was able to fit in withough…

Pobrania
287
Polubienia
27
Ocena
4
P
PrintablesMagnusT

Flsun V400 - Filament feeder UNDER the top box

Don't like having the filament roll on top of the Flsun V400? Tired of climbing up on a chair to change filament? These parts move the runout sensor down a bit and adds a short curved bowden tube guide (so you don't get any kinks in the…

Pobrania
286
Polubienia
43
Ocena
4