1188 modeli
This is a series of test prints which were inspired by the following MIT publication : Snap-Fit Joints for Plastics - A Design Guide https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf While the above…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Two versions for Countersunk screws 3 mm or 4 mm Enjoy printing! I am open to your suggestions and feedback and look forward to seeing your 3D creations.
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers. It’s also a lifesaver when your…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
See full video at: https://www.instagram.com/reel/C5RSd7RLTvq/?utm_source=ig_web_copy_link This scout woggle, specially designed for Cub Scouts, features a wolf pawprint. I added new designs for printing horizontally, enabling easy color…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Shark glider by Arky scaled down to fit on a mini+ or a smaller printer.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This is a remix of Thyn's Radius Gauge for calipers. Initially I just added some nice fillets and made sure it fitted my plastic calipers and when I tried it I saw that a 38mm diameter cylinder yields a measurement of 7.9mm. Multiply by…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
2/5/25 - Added a second version of the model with a change to the style and position of the hole for the hook, I think this V2 model is a little easier to get the hook into. I love our Beaver Dam tip-ups, but keeping the lines and hooks…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Respecting the copyright policy not only protects intellectual property but also supports the creators and the integrity of the 3D printing…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Hello,,, Here we have more versions of our Festive reusable Christmas Cracker
Wydruk około 19,27 €–23,55 € nettoWstępna wycena jednego wariantu
Simple cleat wedges. I recommend printing with 100% infill. I've ridden 100 miles or so on an indoor bike with these to reduce nerve pain / compression. I haven't tested these on real outdoor road cycling but they're holding up well on my…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ford Focus MK4 Quadlock adhesive mount adapter for Aliexpress phone mount Quadlock dashboard/console mount doesnt stick on the dashboard material and couldnt find a good location. So i combined it with this dashmount from Aliexpress…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
I designed this to holster my Universal Circ 18v-53 Circular Saw. The model as a guide in the slot to keep the unit in place. The French cleat version also has a little storage space on top, and an optional screw hole to keep the unit in…
Wydruk około 5,23 €–6,39 € nettoWstępna wycena jednego wariantu
What is a finial? Finial : A sculptured ornament, often in the shape of a leaf or flower, at the top of a gable, pinnacle, or similar structure. Note: This will be one of several finial designs I am making. This finial is designed to be…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a top-side mounting plate/bracket for these 4 in. Stacking Tilt Bins from Harbor Freight . Two versions are offered: single dovetail mount: designed for 1 storage bin double dovetail mount: designed for a pair of connected storage…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Wanna get the commercial license? Have a look at my printables club. Your wished logo isn't available? Ask me! Maybe I make it. ;-) I have created a helmet hook, which has a wide contact surface so that the padding of the helmet won't get…
Simple phone stand with hole for charging cable. Four versions Material: PLA Layer high: 0,3 or lower No support needed. Brim recommended Rev 2 is with bigger hole for charging cable. Rev 3: Added version with bigger hole for charging and…
A quick and easy chip clip. Has a tab for easy release and two lock positions for those extra chunky chip packets. Update: Added a slightly shorter, wider version. Update: Added versions designed for easy opening and a super-short version.
A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 20mm strap 25mm…
I redesigned the handle to be more in line with the rest of the printer look. I centered it on the height of the door unlike the original which is centered on the height minus the cutout for the screen. I also added a version where you…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Bambu Labs logo added to the lid with an AMS and an Embossed version. You also need 8 M3x20 bolts for the hinge and latches. Orginal design by Coffey72 which itself is a remix of a design by zx82net…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
Thanks for downloading my model. If you like it and would like to help fuel my designs I'll welcome a coffee donation :D thanks! https://ko-fi.com/supermatt The clear plastic card holders we use at work just don't last. I designed an ID /…
Update: 02/03/2023 I am now the proud owner of a Bambu Labs X1CC and am enjoying the AMS. I never printed my Foxy in multi colour at home and was horrified to find issues with this version of the model it which would affect a successful…
The iconic lightsaber used throughout the Star Wars film series. Photos show the prop after filling, sanding, and painting. The files contain versions from A New Hope, Empire Strikes Back, and Rise of Skywalker. We made a video covering…
Here is the tall Japanese Shoji Lantern which is fully compatible with the Bambu Lab LED Kit 001 . Inspired by Japanese aesthetics, It's ideal for anyone who appreciates traditional Japanese design, creating a peaceful, zen-like…
Stackable Storage Bins with Modern Honeycomb Pattern Introducing our versatile 3D-printable stackable storage bins, designed with a sleek modern look and a distinctive honeycomb pattern. These bins are perfect for organizing a wide range…
This fan-art project came about at the request of my two children, both of whom LOVE Bluey and Bingo and are the same age as the characters in the show! Made using Nomad on iOS. Print notes When imported on cura the models are…
Introducing the Croc Clip —a fun and functional filament clip with bite! Designed in the shape of a little crocodile, this clip snaps securely onto your filament spool, keeping it neatly in place and preventing tangles or unwinding. 3mm…
This design is inspired by the traditional Kumiko Asanoha pattern. I wanted to reinterpret it through a unique structure and super-elliptical form. Beyond preserving traditional aesthetics, hope to add new creative elements to traditional…
Glock 9mm double stack magazine speed loader - 2 Versions. One has more rounded sides on the top end. I printed these with 100% infill and they are very sturdy. These have less slack around the magazine than some of the other models I…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I like the template from @DavidHolecko_1339235, and…
Heyho :) Here is a tensioning device for the belt of the Y-axe. I have tested at least 4 different designs myself but was never really satisfied. Either the designs were too clunky, not nice to print, you had to drill holes or the…
PS5 Controller and Headset Wall Mount (or Single Controller) This wall mount provides a versatile solution for organizing your gaming space, allowing you to conveniently store one PS5 controller and a pair of headphones (or a single…
This design is based on Fukar's design: https://www.thingiverse.com/thing:3245139 My additions/modifications are: Mounting options for both screws and magnets (10x2mm magnets) This design prints in one piece, which increases part strength…
Portable Ashtray No supports PETG / ABS / ASA 68mm height
Valentine’s Day is approaching fast, so of course Deltaprints couldn’t miss the chance to release another new design 💕 This time it’s a table decoration featuring a couple standing under a tree, designed as an elegant silhouette 🌳👩❤👨 The…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed a carabiner with a lock and a hole for attaching a rope. There are three versions to choose…
This heart-shaped fidget sphere is a tactile desk toy made up of 10 interlocked pieces that slide freely using gravity. When held from one side, the remaining parts smoothly slide downward until they reach their limit, creating a…
There are two versions: Standard version to print with PLA, ABS,... Flex filament version for flex materials only
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
I made these 120 film cases and thought I'd share them with you. There are two variants with space for 3 or 5 rolls. Both the container and lid are chamfered to avoid an elephant foot. The tolerances for the lid have been tested and…
Let's be real, a DSLR isn't in everyone's price range. With advancements in technology, modern cell phones can produce images that you would be hard pressed to find any flaws with. So why not use a tripod? Simple mounting system that…
You can either use the step file (Move the lid 9mm down to contact the build plate) or the 3MF file to print with the logo in the correct position. Needs an MMU for multi-colour printing. I've added the STLs for the base, Inner cardholder…
Features 26.11.2021 updated added duct with stopper at fan hole 18.2.2021 updated the fan duct for more spacing around the nozzle. BL touch standard parts flow optimised separation of hotend and nozzle coolin I wanted to have an easy…
A knitting bowl to prevent yarn balls from running away is a thoughtful gift for your grandmother. :) Simple to print, just need to add several supports (example at photo) P.S. Added an updated design with extra holes.
A simple, geometric, hook that should fit most purses and bags. Can also be used for aprons, jackets, tools, rulers, cable management, and whatever else needs a strong flat hook. I designed this for my crossbody bag and I created three…
This model is a remix that adds a couple features. Three version are available. One with a deer silhouette, original, and deer silhouette with peg for holding your bow release. The hanger will hold over 25lbs. Happy printing
This rose bear figurine is a beautifully detailed decorative model inspired by the popular floral bear design. Made using high-quality 3D printing, it features sculpted rose textures that give it an elegant and modern look. The model is…
Suggested print settings for the Bookmark version 2 (NEW): Layer height 0.2mm. Infill 80%. Perimeters: 5. No supports are needed. Suggested print settings for the Portable version 2 (NEW): Layer height 0.2mm. Infill 15%. Perimeters: 5. No…
Heyhoo Here I have a new Container for you :) Perfect to store away some dry stuff like Coffee or other things! In addition to the obvious, that the container is as well sealed as possible, I also took great care to ensure that it is very…
I designed this wall mount to have a few of my spools ready to use (Other spools are box stored) The rod is just a wooden broomstick with a diameter of 23.5mm (place where the rod is resting is designed as 24mm to compensate for some…
Sometimes I like to try out an idea in 3D printing even though I think it may not be the best choice for a particular application, because it helps me to test the limits of what is possible. With that in mind, I can say that these key-cap…
NOTE: To print this model correctly, after importing the .stl into your slicer, you must split it into objects. If you don't, the slicer software will likely make the 0.1mm button part of the body, making separation impossible. The method…
A rugged looking stackable tray to store small items. One of the faces has a dedicated space to stick labels on. Overall dimensions are 18.2 x 15.2 x 3.2 cm. Comes in 2 versions - with or without dividers. If you enjoyed this model, check…
For a detailed guide on how to put this together, please visit our article here: https://www.corsair.com/explorer/diy-builder/cases/3d-printable-hard-drive-cage/ TL:DR - We have made two versions: Infinirail version - fits FRAME 4000D…
This slugs represents the seasons. Its has ornaments on the heads. The winter slug has a gift on the head. The autumn slug has a pumpkin on the head. The spring slug has a flower on the head. And the summer slug has a pool on the head.
Parts Needed: 1x Torso 2x Leg Overall Options: Friendly Face Scary Face Arm Options: Straight Straight 45° Twisted Twisted 45° Support: If you like my work and want to support it, download it and give it a like. For additional support,…
I recently got a VW UP and I really like the USB port mounted on the dashboard but I didn't get the original mobile phone holder accessory with the car. I think this will work with most UPs that have the USB port in the upper dash and…
Ever wanted your Dummy 13 to have something with a little more oomph? Well, look no further than this pack of dummy 13 shotguns! With many different shotguns, ranging from full size ones to shortened ones, single barrel or double barrel,…
Źródło oznaczyło ten model jako treść 18+.
This is a fingertip mod for the VXE R1 and its versions. The weight comes in at 26 g when printed in PLA using my settings. Please let me know if you have issues with the mod, so I can fix the design. My hand size is 18x10cm and I use an…
I made these 135 film cases and thought I'd share them. Just like my medium format (120) film cases, these come also as a 3 and 5 roll size option. The lid is symmetrical so it fits in either orientation and the registration pins hold it…
Description: Never lose your road bike pump adapter again! This 3D printable keychain holder keeps your Presta to Schrader (AV to SV) adapter securely attached to your keys or bag, so it’s always ready when you need it. The actual adapter…
Print with semi-flexible filament, like PP or stiff TPU. I haven't tested PETG yet. Below You can find two versions of generic segment, one has more clearance on the inside side than other. Added two adapters: male - male adapter female -…
This is a bracket to put a M4 Mac mini in a 10 inch network rack. I takes up 1.3Us of space it works quite well on the Geekpi/Deskpi T1 rack in the bottom U as there is some extra space underneath to not waste any Us I have now also…
Update 25.06.2023: 3 models added I also had tried different cutouts in order to save some filemant. Therefore I had created three different models: The first one has larger cutouts for faster to printing (3 hours instead of 4). It has…
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2019: Experimenting with eyewear led to two versions of Bebop's shades from the classic 80's cartoon. Enjoy! https://dragonmountaindesign.com/?p=2267 Print…
Fingapult is a catapult for your fingers. Come in two strengths, standard and magnum. Standard can easily lunch marshmallow 10+ feet (3+ meters). The magnum nearly doubles that. Please supervise children and avoid using hard candies. The…
I liked the original design by airbiscuity but the fitment was far too tight. I loosened the fit so the magazine will slide in and out easily but not fall during running. Secondly I changed the loops to be a belt clip that can be mounted…
Marker base for standard global positioning marker stickers used with 3d scanners like Shining3D Einstar - H - HX etc. 3D printed with bottom hole to accept a 10x1.5mm magnet(this version may require supports) I have also included a…
Articulated Beaver figure. I made it in 4 versions. It mostly differs in head shape and tail. It's family of beavers that are happy to play with you. It is Print in Place, no supports needed!!! My kids named them Dany, Kazio, Henio, Pablo…
Multiple versions, also with all letters of english alphabet. Extra version for single paracord strand. I use lighter and pliers to fuse both ends of paracord and hide connection inside opening at bottom. No supports needed, print in…
A “”""scope"""" for your blasters, mainly cosmetic, but it can function as iron sights, the reticles inside the caps can be lined up for rough aiming and it has a set of actual iron sights on the top that look like a small red dot on top!…
Since I'm back to owning a Glock Pistol, I thought it was about time to rework my original Glock gun stand and bring it to 2025. I made this stand for the purpose of being able to store my gun in my bedroom gun safe or on your night stand…
Applications Strap webbings are very convenient for all kind of storage, holding, fixing and securing applications. The straps are cheap and easy to get (50m of 1 inch, 25mm, straps are around 15€ at Amazon). Snap-buckles are also very…
Size cca 85x60x55mm. Design versions A, B, C, D. Versions for max. Phone depth 9, 11, 14, 17, 22, 27mm. Tested. Second version:
Object Description: This is a print-in place storage box for E3D Revo Six nozzles. Following versions can be downloaded: 4 nozzle version for brass nozzles 0,25 / 0,40 / 0,60 / 0,80 5 nozzle version for brass nozzles 0,15 / 0,25 / 0,40 /…
Printing Instructions: Materials: PLA, PETG, or ABS Support: 60-65 degrees (overhang) Infill: 10-20% Cubic INFO: My friend recently purchased the GPD Win 4 and needed a case, but there is none in the market yet other than 3D-printable…
Wanted the original stand to be a bit higher, so I have altered a bit.
XL ALT Version just added!
This handle will replace the small and often broken handles that come on 5 gallon buckets. This is designed around a standard 10 gauge wire (0.135" diameter) 5 gallon bucket handle. Often the wire handles will have a bend at the top where…
The perfect sand moulds for little builders to build sand castles, walls, fortresses and cities according to their imagination. Available in a rectangular (14 x 7 x 5 cm), a square (7 x 7 x 5 cm) and a cylindrical (7 x 5 cm) version. All…
A beautiful interplay of simple lines combined with regular geometry in a retro Miami style. Bring the 80s back into your room with this model and have fun printing ;) Make sure to download, leave a like and take a look into my other…
Kindly "LIKE" if you download Donations welcome at MetaMask: 0x60336dD01af8f8542Ab7F263b02F87302c83b5f2 Bitcoin MJB Monetary Metals Coin Redrawn in 3D from scratch 12cm diameter AutoCAD file STL in 3 versions: -2 colors, for dual…
🔵 Flexible Caterpillar 🔵 I created 4 versions (8,10,12,14) Versions 8 and 14 are in the video and picture. Number means the number of parts from which it is formed. I do not recommend TXT for this print . PEI is sure that it model will…
Two versions tactical vertical grip inspired by Magpul modeled to by printed easily in one piece without suport. Need M3 fasteners. Printing "0.20mm SPEED" 30% Infill 4 Parameters (Because of the clamping) Prusament PETG base settings…
A remix of the sanding sticks and customized labels to be 10mm and 25mm wide. The photo shows the 10mm ones to the left, the original sanding stick in the middle and the 25mm versions to the right. They use the same printed screws as in…
3 different warning labels for easy 2-color printing without MMU or AMS. Simply change the filament with a color change in the slicer at the right layer. There is a grommet on the back for cable ties so the sign can be attached securely…
Overview These foldable tea bag baskets are perfect for the filament-conscious tea-lover! They print in under two hours, fold really simply, and are designed to be stackable. I made the design in OnShape and there are a few options to…
This are 2 different track systems for your XRP . What's the right one for you? Here's a short summary that should help you pick the system of your choice. Further down you'll find a detailed instruction for each system. Also you might…
Hello, this is my first model, a parametric case for screw-on lens filters. There are two versions: V1 - Case with a textured base and knurled lid V2 - Case with just knurled lid V3 - Case with a knurled base and knurled lid Comment if…
I downloaded and printed the sd card holder from "mmurase00". Then I figured out that the print can cause that sd card (micro and general sd as well) could either fall out of the slot or you have so much resistance that you run a high…
I designed these zip tie mounts as a practice project in Fusion 360 . Three versions included: One for glue or tape Two for screw mounting Square version comes in two sizes: 35 mm and 26 mm Printing Notes Print “by object” to get the best…
Just good clean fun.
Summary Hide your Lenovo dock under your desk or mount it on a wall with these universal Lenovo Dock holders. Compatibility - Does it fit my Dock? Sure, please choose the correct height: 30mm height ThinkPad Hybrid USB-C with USB-A Dock…
![#0132 Sewing Pitch Template [3 versions]](https://media.printables.com/media/prints/809978/images/6321700_e3bc384d-6096-465c-b6cd-77099b1b2a16_9c1a9c83-a377-4e7d-b2f1-accad0ea64a7/20240324_131011.jpg)
![Rugged (looking) Stackable Tray [2 versions available]](https://media.printables.com/media/prints/0ceb978a-83bd-4818-88db-4713d60f1e8c/images/13603041_a4560b7c-742f-4671-b3a5-dee4025cb89a_e346db02-35cc-4b65-a329-5d85f4eed984/stackable-tray-poster-1.jpg)
