108 modeli
Simple box for casting votes, polls, or collecting suggestions. Eyelets allow lid to be locked using a U-lock or zipties. Box base is 17.5cm x 13cm, and 17.5cm tall. The slit in the lid is 1cm x 14.5cm. Box needs to be printed bottom…
Wydruk około 6,64 €–8,11 € nettoWstępna wycena jednego wariantu
The scratcher on this model tilts in all directions to keep the surface in contact during use. Design Features: Print-in-place (no assembly required for the head). No supports required. The handle is a 3/8” wooden dowel (nominal dowel…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
What could possibly be better than a scratcher with a pivoting head ?…a scratcher with 3 pivoting heads, of course! This model is similar to my previous pivoting head design, but 3 times more satisfying. Design Features: Print-in-place…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
Pivoting wheelbarrow handles for easier handling. Fits as replacement of handles with inner diameter 32.3mm but can be adjusted. You will need M8 screw with locknut for assembly. My first try, printed in PETG, 0.25 layer, 25% gyroid…
Wydruk około 16,50 €–20,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
edit 28-07-26 - added a variant with 4 tight holes. See under Pivots for PTFE tube with tight fitting, "Quad Pivot 4.2mm round.stl" edit 15-10-22 - added two flat variants, as well as a M6 M10 variant This pivoting pass-through allows to…
This is a Pivoting Display Mount for the BTT TFT35-SPI V2.1 The pivot assembly is spring tensioned to apply friction to the mechanism. I have repurposed an old bed levelling spring for this. A reasonably sturdy spring with a minimum ID of…
Inspired by some of the other Posts i wanted to design a Zen-Garden with multiple Levels, Ying-Yang and the Ability to change the Apperance without having to redo everything. The Design is fairly easy. 3 Trays for Sand, Stone, Water or…
I wanted to use my vacuum cleaner for a simple dust extraction. I bought 4 meters of the cheapest vacuum hose and created this adapter to make it fit into my saw. The key feature of this adapter is an ability for the hose to pivot freely…
Inspired by Technidyne`s oiler I have produced this thing to oil certain types of filament and for when I want to purge\clean the heating chamber. The pivot allows the bucket more movement when the X carriage is traversing. 1.The mounting…
This CNC wedge clamp pivots around the base bolt to allow for side or angled side pressure. I printed it with Polycarbonate reinforced with Carbon Fiber. Any strong filament should work.
Don't tighten too hard or you will compress the ptfe tube. Use a small brim on the coupler to keep it from coming loose.
A simple door retainer for when there is insufficient room under the door for a door wedge. All parts snap together. The screw covers snapped in for me but if loose then cyano-gel is your friend. Offset from the skirting is enough to…
This simple toilet paper holder prints in place on a flat side on the arm to give a working part right off the print bed with no supports or assembly! The part can be mirrored to load from either side. Design inspired by @gazzaladra in…
Hello again, Alright... what a saga this project has been. It probably should have been the V-22 given how many revisions needed to be made and how much of a headache it became. If you have already downloaded it, I apologize - the…
I was realigning my derailleur hanger the other day after crashing over a curb when I remembered what a pain it is to swing my Park Tools DAG-2 hanger alignment gauge past the stays, especially since my o-rings fell off long ago. I…
These are space-efficient tokens, designed to be the same thickness as the original Dixit voting tokens and use the same number font. We've tweaked the thickness to minimize readability of the number when upside-down on a dark surface.…
Welcome Home into your home! Recreate Wally's home from " Welcome Home " with pivoting eyes that always seem to follow you all throughout the room.
There is a newer version of this thing here: https://www.thingiverse.com/thing:4635067 Update:18\10\20 I had noticed some differences with the alignment of the touch panel on the BTT display with my various units. I have therefore offset…
I really like Mighty Shrub's pivoting shell catcher on my Firefly so I remixed it for the Battle Axe by SillyButts. Fits very nicely alongside my Battle Axe top rail shell holder:…
In playing Mysterium, there comes a portion of the game where you need to vote discreetly without others seeing which token you used or which are remaining. Since one of our tokens was lost, a simple piece of marked construction paper…
Inspired by the new Creality CR6 SE I have remixed my Side Mounted Spool Holder with a Pivot\Hinge. To be honest I still get a lot of use and probably prefer the original design but thought this might offer some further flexibility to…
Double-sided version of TheKwijibo's model.
30\10\20 Uploaded missing top & Bottom Panels for the BTT version. This is a remix of my Pivoting Display Housing but I have redesigned with a much slimmer profile. The original can be found here: Pivoting Display for Ender 3 - Pro - V2 -…
Uses 2x M5x30mm, 1x M5x25mm bolts and 3x M5 nuts. Print frame with supports. Can barely fit 18cm² print beds if rotated diagonal.
This lets you mount your trail cameras angled down. I like to hang my cameras several feet up on the tree so deer and thief's cant see them. I have several of these brackets which have been holding cameras all year. I like printing them…
Bracket - Pivoting Bracket - Staffa angolare pivottante con fori filettati Right + Left Overall dimension 140x90x25mm M5/M6 Threaded Easy to print Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Just a stand with holding trays that rotate around a post. I use this primarily for holding small screws while working on watches or camera lenses so that I know where they are and it has enough trays to allow me to organize them while I…
A pivoting holder for 120mm Axial fans. Fits snuggly on 16mm grow tent poles. Uses 2x M3x15mm bolts and 2x M3 nuts Once you adjust the tightness on the holder, it will stay in place. With just enough torqon the bolts, you can pivot the…
Small modification in the display front piece to use nuts instead heat inserts
This is a voting box where you can cast your votes in super easily. The lid comes off the box easily, and has a slot to put votes in for easy use. Print Settings: Supports: None. Infill: 15% or higher. Materials: Any Hard Plastics.
The Version 1 of this Prairie Schooner covered wagon (without the bonnet) has a fixed front axle, which is fine for displays, but not as fun to play with. This Version 2 has a pivoting front axle attached to the tongue (with a…
I wanted a compact, low profile, camera adapter for my kayak. I modeled this up to based on Prestonf's Scotty male end adapter. It seems like it'll fit my needs perfectly. Print this part with no support material. The main Scotty adapter…
I've placed my printer on top of a closet, and wanted to be able to see the screen from below. This solution utilizes the original mounting bracket and t-nuts. The screen can still be oriented upwards (in the original position) if you'd…
This model is a replacement for the original exhaust grill from both the Voron 2.4 and Trident printers. This replacement grill is designed to allow a pivoting reverse bowden and a PUG umbilical gland
I wanted to be able to change the pivot/spin direction of my Honeywell Turboforce HT-900 fan after it was mount on the wall. Between this spin and the normal tilt of the original fan, I can point the airflow in almost any direction. I…
A sturdy yet elegant wall hanger that holds your guitar in style. It is designed to fit electric and steel string guitars and it pivots to fit most necks. Guitars with a wider neck such as classical guitars probably won't fit. For…
This is a shell catcher for the Colonel Wasp Firefly, to prevent the hassle of littering shells all over the field! The catcher is on a swivel to allow easy access to the breech and shell bag. Field tested and very reliable! I recommend…
Simple pivoting mount for the offical 7inch raspberry pi touch screen [https://www.raspberrypi.com/products/raspberry-pi-touch-display/]. Perfect for your klipper screen UI or other pi projects. Pivot mount designed to fit on the leg of…
Summary This is a gloriously over-complicated box for storing cards, or anything else really. As the lid is opened the platform rises, presenting the cards. There are pre-layed-out plates! You can now select from 7 plates to greatly…
A handle and bracket that can pivot/fold down out of the way. It turned out pretty sturdy and can be added to anything really. I originally created this to replace a broken and lost handle to a portable Bluetooth speaker.
Modified mount for the The 100 printer front bottom frame. Print with strong infill (25%, 3 perimeters) as you have to use longer screws for going through the mount and the front connector into the frame.
A low friction filament roller that points in the direction the filament is pulled. Direct drive extruders, such as in the Sovol SV05, move around with the hotend and travel over the full extent of the build platter. The filament can be…
A Mini 12864 pivoting display Mount for a Vevo or other 3030 based 3D Printer with fixed ratchet positions from 0 to 80 degrees. The Rear Housing & Display Mount are modified parts based on the Voron Design V2.4 display mount. So full…
This is a large bench hold-down clamp with pivoting head. It is sized to use 3/8" bolts. I use it to hold test samples onto a vibration table for reliability testing but I'm sure there are lots of other uses for it. I'm using PETG with 5…
This is a remix of the following 3 projects that all contributed to creating what I needed: https://www.printables.com/model/427857-samsung-home-theater-ceiling-mount : this gave me the wall support part + the sliding insertion mechanism,…
This is a spring loaded, pivoting, punching caveman action figure. There are two main pieces, the top and the bottom, and four strengths of interchangeable springs. The springs provide a pivot point with snap-back action which allows the…
Ender 3 V2 Slotted Pivoting Display Bracket Mount Title say's it all. Basic bracket that has 1 fixed and 1 slotted opening so you can mounting same as the stock bracket. I hated the stock brackets fixed location and this fixes that. Let…
It's been over 2 years since we added models. Most of these were created in 2023, 2024, or early 2025. My middle school son is learning his way through Tinkercad and Onshape. He created this pivot or simple bearing to fidget. Connect four…
The original is indeed slim, and sharp looking. I ran into some issues with it, and I also created some options (such as mirroring the mount to fit my situation). As such, it can now be mounted on either side by just choosing which parts…
I couldn't get the two side pieces that hold the latch in place to fit right, so I just remixed it to use a bolt and nut
Remix of this part by @ MichaelOlson https://www.printables.com/model/141194-bowden-tube-filament-guide I added a m6 thread to one side of the opening so I can screw in a m6 bowden coupling.
Niche bracket pair. Look at the supplied drawings for dimensions. Be sure to print both standing up on the bed to ensure roundness of the mating surfaces. I achieved a perfect slip fit between the parts in PETG with my printer's extrusion…
S26 ultra in Samsung maglock clear case for a brodit pivoting mount
This is a pivoting Oiler for the Ender 5. Primary features are: 1.Dual pivoting bracket to allow Oiler to move with filament when spooling. 2.Screw on top cap to retain filament and sponge. 3.Simple fix to 40 x 20 extrusion. Installation…
Pivoting under-mounted headset hook This headset hook mounts under your desk and folds away when not in use, for a clean look and zero interference! Unlike many clamp-style solutions, this headset hook screws into your desk from its…
This is a version of my other playing card holder without the counter. It has a larger dovetail groove to catch the cards better.
The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open frame assemble. This enclosure gives it more protection but also gives it a stand to allow pivoting for better viewing…
A replacement part for doorbells or mailboxes that have a pivoting nameplate
I needed a holder for my black & decker cordless screw driver to hang on my honey comb wall. I created 3 different styles. One style is made to mount directly to a wall, in case you want to add it to a work bench. The other two styles are…
Swinging J1772 bracket that allows you to lay the charger flat against the wall and swing it out as needed. Printed in PET 40 % but may go higher depending on longevity. Prints in place as one object. A little crunchy in the joint as the…
A pivoting mount for the 12864 LCD smart controller. Has 2 fields of motion and can be locked in place to maintain position. Uses a m4x50mm bolt and 2 nuts for the horizontal rotation, and 4 m3x20 to hold the back of the case on. 2 Knobs…
Early voting dates differ from state-to-state. Use this sign to let people know they can vote early! Switch out your filament mid-print to achieve a multi-color print without special hardware.
remix of Voron Mod by Galvanic adding the little zip tie bit for the canbus wire
Just a gate catch I made to keep the gate out of the way while open. Made for this gate ( https://www.amazon.com/dp/B09JKVBHKS?psc=1&ref=ppx_yo2ov_dt_b_product_details ). Requires you to be able to lift up on the gate to release and…
huge thanks to dyne for letting me use meows designs which can be found at this link: https://at.tumblr.com/knightobreath/have-some-stickers-for-when-you-v8te/ylcd1faindp5 on the topic of food safety: fff/fdm printing results in a porous…
This enclosure is for a standard 20x4 line LCD. It pivots on a small base intended to be mounted, with 2 screws, to another surface. No standoffs are required. The 4 screws (M3x20) in the back hold the LCD in place. The enclosure is…
Lockable ballot box for votes, featuring the logo of the Queensland Teachers' Union and name. This design's use of this copyrighted logo was approved by General Secretary, Kate Ruttiman. We are a democratic union, and every member's voice…
iPhone X magnetic desk stand with pivoting adjustable tilt. Requires 4 neodymium 8x3 magnets attached with thin CA glue. Also bolt and nut This is after first print adjusted prototype fits iPhone X in a light sleeve with metallic back to…
I wanted a way to organize the mess of tokens for my 10-person edition of Dixit. Other models were either too space consuming, or too small to fit all my cards and tokens. This fits at least 12 tokens and the rabbit, so you can print one…
Prints upside-down (see screenshot) without supports.
Simple mk3s mount for Pivoting Display model by boothyboothy. Use M3 heat inserts.
1x5 Gridfinity Tray pulled from ( https://gridfinity.bouwens.co/ ) that I added a cutout for a Ryobi USB LITHIUM LED Pivoting Laser with a hole at the back for easier removal.
Add a touch of dynamism to your decor with this one-of-a-kind decorative object! Comprising two cubes forming a parallelepiped and pivoting at the center, this captivating object offers an intriguing visual experience. On each side, the…
Quick remix that allows you to use the tilting BTT SPI screen mount with 3M instead of attaching it via extrusions.
Do you want to handle some custom votations ? If yes, this model is the one you're looking for ! About the machine: The system was made to allows you to create custom votations. The machine have three buttons (Green, White, Red), but you…
This strange contraption is a Tip/Voting Jar thing... yeah! Here's what you need: x1 - Base x1 - Key/paper clip x1 - Paper holder x2 - Big bolt x2 - Big bolt cap x2 - Lid x2 - Snap pin x4 - Bolt star Not included in this thing: x2 -…
To achieve the most strength in the jaws, I printed it upright with support material between the jaws.
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
I have made some counterweight levers in the shape of fish skeletons for our clothes line. The tail of each fish is connected via a pulley to my clothes line, the line from the mouth has a rock as a counter balance to keep the clothes…
I designed this to mount my 7" FEELWORLD 4k Ultrbright field monitor to my tripod and other things. Models include tripod adapter and fork mount for monitor as well as spacers and bearing mount. Side (pivot) thumb screws and tripod mount…
After building the Lack Enclosure for my Anycubic Mega S, and top-mounting the filament holder, I decided to move the filament runout sensor to the top of the enclosure instead of disabling it. The tolerance is just loose enough that the…
When I voted by mail I didn't get a sticker so I created my own. I used my MMU3 to get multicolor but you can do it with manual color changes if you don't have one. When you put the files into your slicer make sure it is imported as one…
Local vote today and decided to make a quick little print to hang off a keychain, purse, or slip into a wallet for filling out those pesky ovals without going outside the line. Not sure how universal oval specs are, but easy to scale in x…
Important: Still learning and practicing with CAD/Design. So lower the bar on expectations. I was in search of a way to add a display (BTT TFT35-SPI) to the front of my E3NG, while using the fantastic Flat Mesh Skirt with Wide Legs mod.…
A unique 3D printable creation — this Butterfly Flipper Fidget Trainer, Print in Place, Pivoting Handles, Safe Tip Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
This is the Fusion 360 model of the VoteChain voting machine for the 2022 Jetlearn Web3 Hackathon Github: https://github.com/Tommytom123/JetLearn-Hackathon
This is a very simple Extension Arm to my Pivoting Filament Oiler to allow the Oiler to hang immediately below a spool by hooking to the spool axle itself. Designed for use with the Ender series standard spool holder width. Pivoting…
1/4" x 1" hex bolt with washers and locking nuts are used to attach the piviot to the frame. M4 x 10m screws are used to attached the mount to the cord holder. Printed in PETG on a Core 1 L.
This replacement power knob is designed for the Lasko Max Performance Pivoting Utility Fan and has been physically tested and confirmed to fit the following models: U15700 U15701 I designed this after the original knob on our fan broke…
Um die Qualität der Nachsicht bzw. die Ausleuchtung für unser Babyphone (Momcozy BM03) zu verbessern habe ich bei Amazon um ca. 8€ dieses Infrarot Modul auf 940nm IR Basis gekauft. ->…
I have some LED channels that I use in the yard for Halloween decorations and I wanted to mount them so that I could fix the angle that they were pointing. I designed these mounts to be used in the yard (with the spike) or on a flat level…
A unique 3D printable creation — this Butterfly Flipper Fidget Trainer, Print in Place, Pivoting Handles, Safe Tip Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
A unique 3D printable creation — this Butterfly Flipper Fidget Trainer, Print in Place, Pivoting Handles, Safe Tip Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
Free N scale (1:160) sample of our generic diesel shunting locomotive: a centre-cab B-B port/industrial shunter, 91 mm long, with two bogies that really pivot on printed pins (+-12 degrees) and 8 rolling wheels for 9 mm N-gauge track.…
A unique 3D printable creation — this Butterfly Flipper Fidget Trainer, Print in Place, Pivoting Handles, Safe Tip Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
I was a little annoyed by constant clicking noises when printhead traveled in different directions and after making ball insert with TPU 95A it's almost silent. Push it in and it stays in place no problem. Split the model in slicer and…
⚠The print files are currently incomplete⚠ Check in later for all print files. This model uses a leadscrew mechanism to adjust the angle of a dowel. These are the materials: These are the parts for the leadscrew mechanism: .5"-13x6"…
A working solution for your projector setup - the Rotating Mount 3-D Model. This mount offers unparalleled flexibility and convenience. It seamlessly holds your projector while allowing lockable rotation along all three axes, providing…
Description: This is a display mount for the BTT TFT35-SPI V2.1 , remixed to fit 15/15 mm extrusion profiles (such as the Voron 0.2 frame). Unlike the original design, no spring is required . It features a mechanical attachment mechanism…
You can download the stand here. https://www.printables.com/model/1063406-sign-stand PrusaSlicer 2.9.6 (Expert Mode) Filaments Cooling Cooling Slowdown logic - Consistent Surface Print Settings Layers and Perimeters Layer Height - .2…
