Wyniki wyszukiwania: w5

Sortowanie

141 modeli

P
PrintablesMichal Fanta

Curved Viaduct Track - W5

Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…

Pobrania
371
Polubienia
70
Ocena
4,33
P
Printablespaul020559

FeelWorld FW568 5 1/2" inch Field Monitor Shade

FeelWorld FW568 5.5 inch Field Monitor Shade No screws, sticky stuff, etc, except for double-sided tape (or general-purpose glue) to stick some black felt to the inside of the shade to kill reflections. Alternatively paint the inside of…

Pobrania
102
Polubienia
18
Ocena
0
P
PrintablesSancho

[Remix] Modular Watch Stand : Holder Medium Adapter for GW-M5610U-1 / G-Shock GW5xxxx

ENG Holder Adapter for G-Shock GW-M5610U-1, should be compatible with GW-5000U-1 and other GW-5xxxx models from G-Shock with similar rigid bracelet and shape. Original Model by @PRINTSY…

Pobrania
69
Polubienia
12
Ocena
0
P
PrintablesLuccus

Wiznet EVB-Pico2 Case (W6300, W6100, W5500, W5100S)

This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…

Pobrania
62
Polubienia
1
Ocena
0
P
PrintablesRatasich

NP-FW50 Battery Holder (for Storage Cheese Plate)

Designed for the Storage Cheese Plate , this battery tray holds two Sony NP-FW50 batteries (Sony a6000 cameras). Two ¼" screws are needed for mounting. One screw is hidden and prohibits a rotation of the holder.

Pobrania
26
Polubienia
9
Ocena
0
P
PrintablesDaVinci

Halterung für Panasonic EW1511W503 Munddusche

Halterung, um die Panasonic Munddusche ohne zu bohren mit Silikon an einer Fliese zu befestigen.

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesCristi

Cover for Moovo XW4/XW5 Automatic Gate Arm

The covers from my old Moovo XW4/XW5 Automatic Gate Arms became brittle so I needed new parts. But because it seems that this models are discontinued, I can not found any new parts for repairs. So I design the cover and replaced the old…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesHexiBase

HexiBox Series: Tang Band W5-1138SMF / Dayton Audio DMA80-8 2.1 Backpack Speaker

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Pobrania
1576
Polubienia
244
Ocena
0
P
Printablesa.taylor

Sony NP-FW50 battery holders

These are simple variations on the Sony NP-FW50 battery holder by RodLaird to hold different numbers of batteries. I was impressed with the simple but very secure design but had no need for 4 batteries. Anything from 1 to 6 is now covered…

Pobrania
1485
Polubienia
130
Ocena
4,86
P
PrintablesK2_Kevin

Sony 4x and 6x Camera Battery Holder NP-FW50

Holds 4 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long. UPDATE: Added a 6 battery version. NOTE: Works with Sony A7,A7II and other Sony products that…

Pobrania
977
Polubienia
118
Ocena
5
P
PrintablesRod Laird

Sony NP-FW50 battery holder

Sony's A7 cameras chew up batteries like candy. They all the the NP-FW50 batteries which are small and light - but you need to carry quite a lot of them around on a day's shoot. This is a simple holder for 4 batteries. You can insert the…

Pobrania
519
Polubienia
65
Ocena
5
P
PrintablesGri

Holder for Carpuride W702 / W502 on a 12mm bracket (e.g. BMW R1250GS)

remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…

Pobrania
487
Polubienia
26
Ocena
0
P
PrintablesDatheDesign

[IMPROVED] Dust Collection Adapter Dewalt DW1150/DW50 Jointer/Planer 100mm Hose

[Only Planing Adapter] This dust collecter adapter works beautifully for the planing function of my dewalt DW1150 jointer/planer combo. It should also work for the very similar DW50. If its not tight enough on your shroud, you can drill…

Pobrania
453
Polubienia
27
Ocena
5
P
PrintablesAndy L

FTDI CP2102 USB to TTL Adapter HW598 Case (Thingiverse Remix)

So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…

Pobrania
441
Polubienia
24
Ocena
4
P
Printablesnomadic.nico

Guition JC3248W535 3.5" Surface Mount Case

This is a general purpose low profile wall mount case for the Guition JC3248W535 3.5" display. The front part supports the display using the screws supplied, and clips onto the wall mount bracket. I specifically made this to mount the…

Pobrania
400
Polubienia
11
Ocena
0
P
PrintablesManolito
Pobrania
333
Polubienia
68
Ocena
3,5
P

Replacement dragging sprocket for DeWalt DW50 Planer-Thicknesser

--- Import from Thingiverse / Reupload This was my very first design some years ago and what started my 3d-printing journey. We don't have this planer anymore but this model may still be of use to someone. I also added my original…

Pobrania
257
Polubienia
10
Ocena
0
P
PrintablesSilencedFrost

Sony NP-FW50 battery holder - print optimized

Battery holder for sony batteries, available in multiple sizes Features: - Allow easy printing, less visible layer lines - Multiple sizes to choose from NOTE: Layer adhesion must be spot-on, or the latch strength will be greatly…

Pobrania
220
Polubienia
15
Ocena
5
P
PrintablesAltirix

Gridfinity Sony NP-FW50 Battery Storage

Originally I started off with the openscad file provided by briancmoses however in this current iteration little of the original code remains. The main improvement was to support scaling in either direction and not just the Y-axis.…

Pobrania
207
Polubienia
35
Ocena
0
P
Printablessaschakp

For Sony Alpha 7M2 Battery - NP-FW50 and two SD-Card Slots

For Sony Alpha 7M2 Battery - NP-FW50 and two SD-Card Slots

Pobrania
189
Polubienia
23
Ocena
5
P
Printablesmotig

Gridfinity bin for Sony NP-FW50 batteries

Gridfinity compatible: 1x3 grid size (and 50mm tall - non stackable) Includes sockets for the standard gridfinity 6x2mm magnets (I found magnets unnecessary due to the weight of the batteries since I only take out one at a time. I left…

Pobrania
163
Polubienia
13
Ocena
5
P
Printablesjdireen

Sony NP-FW50 Battery Sleeves

I designed these years ago, and they've been holding up great. The side dovetails let you securely combine a number of them together. There's a sloped back, counter to a retaining edge on the front top that keeps the batteries from…

Pobrania
162
Polubienia
22
Ocena
3,5
P
Printablesmr-senex

Carpuride W502 Mount / Halterung / BMW / Quadlock

Hey there, made fitting mounting plates for the carpuride W502 screen - these mounts are compatible with this handlebar mount for quadlock:…

Pobrania
153
Polubienia
3
Ocena
0
P
PrintablesAdam

Park Tool Torque Wrench TW5.2 Pegboard Holder

Prints fine upside down without any supports Tested in PLA but probably longer lasting in PETG because it snaps in This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of…

Pobrania
148
Polubienia
24
Ocena
0
P
PrintablesMourakami

Boenicke W5

Printed clone of the Boenicke W5 speaker.

Pobrania
143
Polubienia
7
Ocena
0
P
PrintablesRobert

[Gridfinity 2x1] Battery Tray for 3x Sony NP-FW50

Print time ~20 Minutes Filament ~20 Grams F3D File included, if you want to customise it a bit more The fit is not overly snug, the batteries are loose but don't shake too much. Print Settings (Ankermake M5C) Nozzle 0.6mm Filament PLA+…

Pobrania
139
Polubienia
11
Ocena
5
P
PrintablesMiister

Modellbau W50 Abrollcontainer Aufsatz 1:87 H0

3d Druck Modell für die klassischen W50 Modelle

Pobrania
131
Polubienia
14
Ocena
0
P
PrintablesDruckmann

Kameragehäuse für WIWACAM MW5N Vogelhauskamera

Die Vogelhauskamera WIWACAM MW5N wird folgendermassen geliefert: CPU-Einheit, an der das Kameramodul mittel Flachkabel unlösbar verbunden ist. Desweiteren ist an der CPU-Einheit eine Akku-Einheit angeschlossen und die WLAN-Antenne. Alles…

Pobrania
131
Polubienia
10
Ocena
5
P
PrintablesTiko

VGA controller XY-W58CDT9-AV7 case

Simple box with sliding lid. No supports. Model name optional, but can be printed with a different colour.

Pobrania
124
Polubienia
3
Ocena
5
P
PrintablesZuberek
Pobrania
119
Polubienia
1
Ocena
0
P
Printablesamigappc

Holder for Sony NP-FW50 Battery

I didnt found a holder for the Batterys and they rolling arround in the bag. So i made them

Pobrania
118
Polubienia
11
Ocena
4,71
P
PrintablesMisterED

Casio F-91W / W59 Wristband /Strap replacement (TPU)

This is my second iteration of a replacement wristband for the above mentioned Casio watches and probably others. In this configuration its not suited for large wrists. The wrist on the Photo has about 20cm circumference and uses the…

Pobrania
116
Polubienia
15
Ocena
5
P
Printablesjjfearsome

Low Profile CTRL key replacement (Alienware AW510K)

Printed upside down with supports with an Ender 3 on super quality settings. Replacement key for low profile ctrl. Category: 3D Printing

Pobrania
114
Polubienia
4
Ocena
0

Sony NP-FW50 Magnetic Travel Case

Magnetic travel case for 2x Sony NP-FW50 Cases. Can be printed with or without Sony logo inlay. Batteries can be placed in the case either way, handy for remembering which ones are spent and which are charged. Magnets: I used two pairs of…

Pobrania
112
Polubienia
26
Ocena
5
P
Printablesmdshw5

Tang Band W5-1138SMF passive radiator micro subwoofer

A few years ago I made a small, poorly made box for a Tang Band W5-1138SMF 5 1/4" subwoofer plus two 6 1/2" radiators. It worked and sounded alright but now that I have developed better CAD skills and understand the modifications I wanted…

Pobrania
110
Polubienia
11
Ocena
0
P
Printablesbmsluite

Folded Horn Tang W5-2143

This is a folded horn enclosure designed around the Tangband W5-2143 bamboo driver. This driver is $100 and this enclosure will get everything out of it you could want. Just clue on the side and bolt in the driver. I used screws to attach…

Pobrania
105
Polubienia
7
Ocena
0
P
PrintablesHoonse

Wiwacam MW5 Birdhouse Holder

a holder for the wiwacam mw5 camera.

Pobrania
104
Polubienia
3
Ocena
5
P
PrintablesFelix

Rugged Box for Sony NP-FW50 Batteries SD-Cards and BAXXTAR Charger

Based on the Rugged Box Designed to house: 1x BAXXTAR Charger for SONY NP-FW50 Batteries 2x Sony NP-FW50 Batteries 4x SD-Card 1x Adater USB-C to Micro-USB

Pobrania
99
Polubienia
16
Ocena
0
P
Printablesbenjiao

Gridfinity Bin for Sony NP-FW50 Batteries

A 2x1x3 Gridfinity bin that can hold 4 Sony NP-FW50 batteries built on top of kennetek's Gridfinity Rebuilt in OpenSCAD . My code for this is also open-source. See it on Github .

Pobrania
98
Polubienia
7
Ocena
5
P
Printableskrisztian96

W5 Glass Wipes Holder LIDL (Updated, fits current verison.)

I have fixed it, they have changed it like 3 times since i designed this, why they do this to me? I use this kind of glass cleaners. I did not like the box sitting on my table. It was ugly. So i designed a holder for it. RED one is PETG.…

Pobrania
95
Polubienia
23
Ocena
4,75
P
PrintablesSleepy_Fem12

ESP32 + W5500 Case

I made this to help contain an ESP32 with a W5500 so that they can be kept in a tidy package. I just used a rubber band to hold it together, this was my first project in CAD so I wasn't sure how to secure them together yet.

Pobrania
93
Polubienia
5
Ocena
0
P
PrintablesBubsBuilds

Battery Rack - Sony NP-FW50

A simple storage rack for holding 6 NP-FW50 battery packs for Sony APS-C mirrorless cameras. Hold batteries snugly, making it a good option for tossing into your camera bag without worrying about having batteries get lost or difficult to…

Pobrania
92
Polubienia
18
Ocena
0
P
PrintablesSchlupp

DN50 auf NW53 Dachrinnen Adapter / DN50 to NW53 gutter adapter

Dieser Adapter macht es möglich standard DN50 Rohre mit Dachrinnen der Nennweite NW53 (z.B. von Marley) zu verbinden. ------------------------------------------------------------------------------------------------------------ This…

Pobrania
92
Polubienia
9
Ocena
0
P
PrintablesClassicGOD

Car Bulb Container for H7 W21/5W and W5W bulbs

Can fit one H7 bulb, one W21/5W or W21W bulb and 2 W5W bulbs. Due to the differences in bulb dimensions from different manufacturers bulb fit can range from tight to loose so always keep the container in correct orientation when opening.…

Pobrania
87
Polubienia
18
Ocena
4,5
P
PrintablesSchlupp

Rain Diverter for NW53 / DN50 Pipes

This design is used to collect rainwater from a gutter. The input side is compatible to the NW35 gutter pipe size. At the output (overflow) you can connect the DN50 pipe. The rainwater will be forwarded through a ¾" hose compatible…

Pobrania
86
Polubienia
12
Ocena
0
P
Printablesb8trez

Casio G-Shock GW5000 - Replacement Band

Hey team, I've been working on this model for a little while and it's at the point now I'm able to wear it for testing, so I thought I would share. In the future I may upload another version pending my results :-). The band was designed…

Pobrania
81
Polubienia
31
Ocena
0
P
PrintablesJustLeader

T10 W5W Motorcycle LED Bulb Casing

This is a casing for replacing a W5W bulb on a motorcycle Check the project out: https://cad.onshape.com/documents/92e5c3f798f8a6130066ce51/w/ae7076d22dcda7223fb65552/e/e8d850c0570b8a4c87a23cd0?renderMode=0&uiState=66744d19abe31d625ad50dec

Pobrania
79
Polubienia
3
Ocena
0
P
PrintablesBrian Flores

Yamaha PW50 Throttle Adapter Adjuster

I purchased a cheap carburetor kit with cables from Amazon, for my Yamaha PW50. The cable was to short, and the rubber grommet was way to small, and would not snug fit into throttle hole. So I modeled up an adapter in Fusion 360, and made…

Pobrania
77
Polubienia
5
Ocena
0
P
PrintablesSomnus

Fujitsu 3.5 caddy and 2.5 adapter with lock for Primergy TX1310 M5 and Celsius W520 series

Nozzle: 0.4mm Layer height: 0.2mm Material: PETG Supports only needed for 2.5 drives. Screws: 4pcs 6-32x6mm countresunk screw for 3.5" drives. 4pcs M3*5mm countersunk screws for 2.5" drives. You can print in place. After the successful…

Pobrania
77
Polubienia
2
Ocena
4,5
P
Printables3dBaet

Epsilon w50 orca slicer pla print profile_orca cube

This is a custom printer profile to use the Epsilon w50 printer with Orca slicer. Profile is tested with pla. You can modify it and use with other material. Print quality encrease a lot respect the original ones. The printer is idex, with…

Pobrania
71
Polubienia
2
Ocena
0
P
PrintablesShahriyar

Battery Cap for Sony NP-FW50 Battery

This is a battery cap I designed based on @dditzler design to clip on the bottom of the Sony NP-FW50 battery that is found and is for the A600 series cameras. I modified the original design and rebuilt it in Fusion 360 to perfectly fit…

Pobrania
71
Polubienia
5
Ocena
0
P
PrintablesKeepy

ESP8266 with W5500E case

Printed using eSun PLA+ black and Generic PLA Orange

Pobrania
70
Polubienia
13
Ocena
0
P
PrintablesNateDimension3

Sony NP-FW50 Battery Holder WITH Loop

Just added a loop for carabiner etc. Remix - kudos to RodLaird for the awesome original design. How I Designed This Just imported STL into Shapr3D and added the loop. Category: Camera

Pobrania
68
Polubienia
7
Ocena
5
P
PrintablesSeeed Studio

3D Enclosure for the XIAO W5500 Ethernet Adapter

This is the 3D enclosure for the XIAO W5500 Ethernet Adapter. It is a compact PoE development board featuring the XIAO ESP32S3 Plus, with an integrated, isolated PoE module and TPS563201-based power conversion that delivers a clean 5V…

Pobrania
64
Polubienia
5
Ocena
0
P
PrintablesBenny Mackney

Sony NP-FW50 battery holder x4 with thumb tabs

Holds 4 Sony camera batteries together to keep your camera gear organised. Mine's printed with PLA - I don't know how the stiffness of other materials might affect the spring element. I thinned the spring tabs from the original for a…

Pobrania
64
Polubienia
7
Ocena
5
P
Printableshmagon

ADAPTER - SONY NP-FW50 to NP-F100 & 200

Replace your old NP-F100 & 200 batteries with a Sony A6xxx battery. You will need : -x4 blade terminals 6mm (2 regular and 2 half-cut →3mm)) -x2 Electric wire -x5 10mm M3 screws Printable without support (be careful to orient the parts…

Pobrania
63
Polubienia
7
Ocena
5
P
PrintablesJakub Ha

w5w car bulb socket NO SOLDERING

just a socket for a w5w bulb for hardware works in your car... DESCRIPTION: no soldering - all you need is a printed part, w5w light bulb and two 0.5mm2 wires (optionally multimeter pins for the other ends - you can use even nails or pice…

Pobrania
63
Polubienia
8
Ocena
5
P
PrintablesPb023_3D

Carpuride W502 QUADLOCK Adaptor

CARPURIDE W502 SET AVALIABLE AT https://cults3d.com/es/modelo-3d/artilugios/carpuride-w502-set It includes back flat plate for quadlock :)

Pobrania
63
Polubienia
4
Ocena
0
P
PrintablesShadowmaker

Sony NP-FW50 Battery Case

A Battery Case for Sony NP-FW50 or compatible. The Case has a status window to see if the battery is charged or not (see pictures). Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: No…

Pobrania
51
Polubienia
3
Ocena
0
P
PrintablesJascha Eidam

Sony Battery Dummy for NP-FW50

I mean, I don't expect many people to need it, but precision is high…as measured on a cheaper knock-off

Pobrania
47
Polubienia
4
Ocena
0
P
Printablesrace85com

LIDL W5 glasses wipes tray / držák na utěrky na brýle

Designed to hold 1 full pack of W5 LIDL wipes and a few more :) Optional lid for better looks with alignment pins Rear mounting points to use nails, bolts or even IKEA Skadis peg board (not tested). Printing instructions: you will need…

Pobrania
46
Polubienia
12
Ocena
4,5
P
Printablesp2baron

SSH1106 OLED Display enclosure (STM32 + W5500)

This is an enclosure I've built for my electric boat. It houses the electronics to read out the state of charge, cell voltage and temperature of my battery packs. A STM32 uses ethernet to interface with a battery management system via…

Pobrania
44
Polubienia
4
Ocena
0
P
Printablesbambuzzled

Gridfinity Sony NP-FW50 battery holder

This is a Gridfinity-compatible holder for one Sony NP-FW50. The slot is slanted to make it easier to insert and remove the battery. There are a few other designs out there but they're all for multiple NP-FW50s, whereas I only wanted a…

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesJason M.

Carpuride W502 Mount

This is a mount for the Carpuride W502. I used it to mount it vertically to the dash of my golf cart. I have included the step and fusion file in case anyone wants to modify it.

Pobrania
41
Polubienia
2
Ocena
0
P
PrintablesMichael Voigt

Modelbau LKW W50 Tank

Tank mit stutzen einfach zu drucken ohne support 1:10

Pobrania
39
Polubienia
1
Ocena
0
P
PrintablesBrandon Kish

Makita PW5100C Table Clamp

This table clamp allows you to mount the Makita PW5100C to a table for polishing rocks. It keeps the PW5001C in its intended downward position, while allowing you full access to the polishing pad. Having it in the downward position also…

Pobrania
38
Polubienia
9
Ocena
0
P
PrintablesFluFFy

TL-w5mc1 Senus 620 holder

TL-w5mc1 Senus 620 holder for the Senus 620 water meter. No screws/tape needed DIY: https://huizebruin.github.io/s0tool/ Sensor: https://nl.aliexpress.com/w/wholesale-TL%2525252dw5mc1.html?spm=a2g0o.detail.search.0 Tested and works in…

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesMeuon

SW5906 Optics Adapter

Fits my SW 5906, printed in PC carbon fiber blend, has survived 20+ rounds of target ammo and 10 of +P. 1st one was printed on a Prusa Mini+ and I was surprised how well it printed the carbon fiber. Needs just a cleanup with a fine file…

Pobrania
36
Polubienia
3
Ocena
0
P
PrintablesStefan666

Vesta Sentinel quick draw mount PDW50

Vesta Sentinel quick draw mount PDW50 Kiss, no need for high tech solutions :) Allows for wall, under desk and various other places to fit the Vesta Sentinel and have quick acces to it. Not "snug fit" for this reason, print as-is and your…

Pobrania
36
Polubienia
3
Ocena
0
P
Printablesrepairwins

Lenovo ThinkPad T420 T430 T520 T530 W520 W530 DVD Drive Tray

I sold the DVD drive in my laptop to fund my electronics modding habit. Instead of having an unsightly gap, I modeled this part which allows me to store an HDMI adapter and a USB-C to barrel jack adapter. It clicks in without you having…

Pobrania
36
Polubienia
2
Ocena
0
P
PrintablesDiskdaddy

Replacement Knob for Frigidaire FW526W-1

Fits a bit snug. Use a bit of grease on the knob shaft (….uh).

Pobrania
36
Polubienia
1
Ocena
0
P
Printablesiibex

UHW50 (inbouwdoos) LID | DEKSEL

What this is Cover for the UWH50 box (hollewanddoos). IMPORTANT: Use at our own risk! This is not an electrical qualified product or part. Why I made it UWH50 box doesn't come with a lid to cover it, which I needed during reconstruction…

Pobrania
35
Polubienia
2
Ocena
5
P
Printableshxr

Bike Fender Extension for Wingee W52

There are many Wingee fender types available, this one is for the front wheel W52 29" with 358mm radius. I printed it sideways with tree supports enabled.

Pobrania
31
Polubienia
0
Ocena
0
P
PrintablesStrider50

Improved Thinkpad T510, W510, T520, W520 HDD cover

The original cover didn't fit on my W510, I don't know if there are multiple styles of the HDD door, but I modified this one with a few simple cuts so that it fits on mine. Category: Computer

Pobrania
30
Polubienia
4
Ocena
5
P
PrintablesEllis Woollatt

Skynetic Mesa / YXZNRC W500 Motor Mounts

If you own one of these RC planes you'll soon find yourself with a broken motor mount and a paper weight. Have more flight time with these than the original ones and work flawlessly. Combined the drive arm with the mount to make the model…

Pobrania
30
Polubienia
3
Ocena
0
P
Printableskjoh

Circuit Board holder for w5100 Ethernet module

Resized, customized a bit for this little module (which lacks any mounting holes of any kind). Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.3 Infill: 10% Notes: PLA Category: Electronics

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesEduardo Cid

SONY NP-FW50 Battery Holder

I created this model to safely carry x2 extra batteries for my Sony Camera when travelling, and also to remember if they were loaded, so there are 2 spaces labelled as “I” and “II”. The tape slides nicely, and protects the batteries from…

Pobrania
29
Polubienia
3
Ocena
0
P
Printablesclem2ray

DW SP1208 - Spare part for DW5000 double bass drum pedal

This part was made to replace the original broken part from a DW 5000 double bass drum pedal. With a good printer configuration it will be strong enough to be used for a long time.

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesRiNax

Rack mount for the Keyestudio W5500 Ethernet Development Board

A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame . To use the front plate you have to remove the power jack of the board. The front plate has three 3mm holes for LEDs. Use M3 screws to mount the board…

Pobrania
29
Polubienia
0
Ocena
0
P
Printableslifeisafractal

Electrolux EIFLW50LIW washer soap drawer spring

This is a replacement part for the Electrolux EIFLW50LIW spring return on the soap dispenser drawer. The original part has what looks to be an injection point in the mold that made a weak point and cased the part to buckle and bend in…

Pobrania
29
Polubienia
1
Ocena
0
P
PrintablesSvensson2584

Keyboard Riser - Cherry DW5100

Hi, here is another keyboard riser I designed for my work mates. It only fits on the Cherry DW5100 keyboard but perhaps some one can find inspiration on the simple hight adjustment concept. I can't say for sure but maybe sometime in the…

Pobrania
28
Polubienia
4
Ocena
0
P
PrintablesXscarfX

W5500 Flipper Zero Module Case

I used extenders for my pins, but you may not have to. Printed in PLA+ 20% Infill No supports

Pobrania
27
Polubienia
0
Ocena
0
P
Printablessamos44

Automatic Gearbox oil dipstick for Renault VelSatis/Espace IV/Laguna 2/Avantime and others with SU1 Gearbox(Aw5550SN for Renault)

Since this dipstick is easily breakable(and mine broke) I modeled it! Modeled using SolidWorks. Used photoshop for known dimensions and calculating rest. Found some of the dimensions in a Russian forum:…

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesBen Friesen

Sanyo FW55C87F TV Legs

May fit other TVs with a distance between bolt holes of 36mm.

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesDave

WIWACAM W5 Bird Box Camera Mount

This is a compact bracket to hold a WIWACAM W5 so it can be mounted outside of a bird box or for a cage. The camera can be found here on Amazon.…

Pobrania
25
Polubienia
4
Ocena
0
P
Printableszarzecka

DIN35 rail mount electronic housing for DFRobot W5500 Ethernet with POE IoT Board DFR0342

In addition to the DFrobot board, expansions can be installed in this housing. The board dimensions for the first and second mounting levels are also available for download. More information and electronics design at: http://www.averon.pl

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesRandy

Gridfinity 1x1 2x Sony NP-FW50 Battery Storage

A Gridfinity 1x1 NP-FW50 Battery Holder. For those who just need two.

Pobrania
23
Polubienia
5
Ocena
0
P
PrintablesLorenz H

NP FW50 Charger Storagetray Skadis Powerextra

Storagetray to mount Powerextra Charger and two NP FW50 on a Ikea Skadis Pegboard

Pobrania
23
Polubienia
5
Ocena
0
P
PrintablesMark

Keyestudio W5500 Box

My boss asked for a project box for the Keyestudio W5500 , with holes for zip ties and enough space for a short Arduino hat. The board slides into the grooves on the interior walls and bridge across the top is for wire harness strain…

Pobrania
21
Polubienia
0
Ocena
0
P
Printablesalfrenovsky

HUAWEI Optical Network Terminal (ONT) gloves and boots (HG8245W5)

All printable without support at 0.1mm layer

Pobrania
21
Polubienia
3
Ocena
5
P
PrintablesVasya

Box Arduino UNO +Ethernet shield W5100

A box with a lid for Ардуино UNO + UNO Proto Shield +Ethernet shield W5100

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesM P

Keychain mod for CASIO W59

Uses origina pins for assembly

Pobrania
19
Polubienia
6
Ocena
0
P
Printablesbossler87

End cap for pneumatic quick disconnect plug NW5

English End cap for pneumatic quick disconnect plug NW5. Can be used to protect and seal matching quick connects on water cooled welding torches. Printed with SainSmart TPU flexible filament on a stock Creality CR-10S. Deutsch Endkappe…

Pobrania
18
Polubienia
2
Ocena
0
P
Printablesbbrks

Sony NP-FW50 - Modular Battery Holder (jasond)

Modular storage for Sony NP-FW50 batteries (used in Sony Alpha cameras) Category: Containers

Pobrania
18
Polubienia
1
Ocena
0
P
Printablesarm00700th

EW55 powerbank stand

for only Eloop EW55 PLA that enough its my first 3d model in my life im not good but ill try my best

Pobrania
18
Polubienia
1
Ocena
0
P
Printablesswoelker

Case for NP-FW50 + BAXXTAR Dual Charger

I needed a housing for the batteries (NP-FW50) and the charger (Baxxter 18592 Dual Charger) for my Sony Alpha 6000. Layerheight 0.2 10% infill Printed in PLA

Pobrania
18
Polubienia
2
Ocena
0
P
Printables3D Etplus

TL-W5MC1 Queen Bee Pro mount

The Queen Bee Pro from Bulkman3d comes with mechanical endstop limit switches. While ok, they're not fantastic, and I wanted something a bit longer-lasting. I designed these two (three if you count the mirrored Y axis as an extra version)…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesRobert

[Gridfinity 2x1] Bin for ON-FW50 Charger & Lens Cleaning Pen

Print time ~25 Minutes Filament ~30 Grams F3D File included, if you want to customise it a bit more Print Settings (Ankermake M5C) Nozzle 0.6mm Filament PLA+ Layer Height 0.40mm Layer Width 0.62mm Perimeters 2 Top / Bottom Solid Layers 2…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesSmeltie

Gridfinity holder for K2_Kevin Sony 4x Battery Holder NP-FW50

Made a Gridfinity bin to hold K2_Kevin's battery holder and used Kelly Egan's bin as a reference to add a few SD card slots. Hope it's useful to someone!

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesDeeDee

Stray light deflector for the BenQ W5700 rojector

Stray light deflector for the BenQ W5700 rojector

Pobrania
13
Polubienia
4
Ocena
0