11 248 modeli
This toy is designed you get a click feeling sensation when you rotate the wheel. Slim body for cool appearance and good click feel! What is Fidget toy?: A fidget toy is typically a small object used for pleasant but purposeless activity…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This fully functional Cryptex has an easily changeable code and is modeled after the Cryptex described in the novel 'The Da Vinci Code' by Dan Brown. (Thank you Prusa team for this wonderful video of the Cryptex) Design I made this…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
You can create am Arduino obstacle avoiding robot or a sumo robot, remote control car or even a line follower. Add more sensors depending of what you want your robot to be. Otto is super easy to make, assemble and code. You have plenty…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Insert hotwheels card into slot and position it so that the name of the car is visible. Hope you enjoy this model! :)
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…
Wydruk około 40,45 €–49,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hanger that slides onto the bottom of Hot Wheels Track. Then hooks onto string or cable. Note: Print file is four (4) hangers, an individual hanger takes about 20 minutes. Testing shows about one hanger per two pieces of track for best…
Wydruk około 1,39 €–1,69 € nettoWstępna wycena jednego wariantu
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
A remix of a hot wheels car ramp extending it to fit 1/64 scale monster trucks! (hot wheels or monster jam). accepts two standard hot wheels track connectors to help line up monster trucks for the big jump! print oriented with the Xes on…
Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu
Charger port plug for Onewheel Pint. I lost mine so I modelled one myself. Tested with PLA and fits tightly. Apologies for my beat up Pint. Print instructions 0.2mm layer height. Supports from buildplate. Everything else at your discretion.
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
I really liked shk1d29's stand, but it would not fit on my Prusa Mini. So, I combined it with TH-Props to make an ultimate combo of the two. Identical to TH-Props's stand, but with the downward slopes to center & stabilize the board from…
Wydruk około 20,04 €–24,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very old barrel in a wheelchair. Originally the barrel was supposed to be separate, the cart is part of another project, but the combination is very successful. Press the barrel and wheel rims separately and use the collar to prevent them…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Basic track connector for hot wheels track
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Hi, This is a printable replacement wheel for pretty much anything that needs one. It’s designed to be fast to print while still being stable and durable . I originally made it as a replacement wheel for my lawnmower —then a neighbor…
Wydruk około 14,40 €–17,60 € nettoWstępna wycena jednego wariantu
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
This is my solution for a splash Free Water wheel for 3dprintys fountain. Print the holder and wheel with supports. They are easy to remove.
Wydruk około 6,01 €–7,34 € nettoWstępna wycena jednego wariantu
I wanted to draw something after the bathtub boat which floats but still looks good on the desk. The idea of an old paddle-wheel steamer was buzzing in my head. You can see what came out of it. It took a few approaches but I am satisfied…
Wydruk około 5,17 €–6,31 € nettoWstępna wycena jednego wariantu
Rims for RC car. Made in Blender.
Wydruk około 4,05 €–4,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🎮 Introducing the 3D Printed Wheel Holder for Simucube QR Wheels by Veracon Engineering! Elevate your sim racing experience with our precision-engineered wheel holder designed specifically for Simucube Quick Release (QR) wheels. Crafted…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These wheels should be much cheaper to make and more practical than the Dolly Trolley as you can lift the whole stack of cases and the wheels will stay on the stack. I have a stack of 4 cases and it rolls without any problem, I would not…
Wydruk około 5,15 €–6,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls. You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo .…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
Wydruk około 4,68 €–5,71 € nettoWstępna wycena jednego wariantu
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Wydruk około 7,00 €–8,56 € nettoWstępna wycena jednego wariantu
Designed a tunnel for my hotwheels fanatic. It's a 4-lane tunnel for four cars or 2 (1:64 scale) monster trucks. The standard hotwheels connector fits on both sides. The top has a row of holes, for a hotwheels emblem. The emblem also…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Wheel center cover adapter for a Golf 7. If you have any problems or suggestions for improvement then please let me know :) I would be very happy about any feedback :)
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
🎮 Introducing the 3D Printed Wheel Holder designed specifically for the Fanatec Quick release Wheels, a must-have accessory for every serious sim racer's setup. Crafted with precision and functionality in mind, this wheel holder…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Čepičky pro označení umístění kol na autě. Verze se závitem,pro výměnu za stávající čepičky a verze bez závitu pro nasazení na nejběžnější plastový typ čepiček, průměr 9,8mm. Valve caps for distinction Wheels placing (position) on car.…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Crazy Cart upgrade of swivel wheels. Requires $5 of hardware store parts and old wheel components. YouTube Assembly Tutorial: Sizes: 3D printed housing fit wheels with dimensions roughly ~75mm x 45mm Recommended Wheels: Quality…
Wydruk około 19,67 €–24,04 € nettoWstępna wycena jednego wariantu
There are plenty of fenders out there for the Onewheel XR. Call them however you want – here is my version of a mini fender. Check out my Onewheel Collection – I have also designed a mini fender for the XR with WTF rails , a mini fender…
Wydruk około 6,90 €–8,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a little windmill that adds a little color sport into your e.g. garden. It's mainly a 200mm x 200mm x 0.4mm flat sheet of plastic with some mounts for the bent wings and a 10mm stick. If you like this thing, you might want to…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a split fender design with the fenders made very short. I like to ride with my feet very close to the wheel so I designed these so I could easily find the edge of the platform nearest the wheel without having to look down or…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To make the Lamborghini Diablo more authentic, I created rims in the same design as the original. Lamborghini Diablo The original rims are too wide and the tire doesn't fit properly. Model: Lamborghini Diablo front - Rim diameter 64 mm x…
Wydruk około 13,98 €–17,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is one from my extensive Children's Toys Collection . This wheelbarrow with garden tools is composed of 17 individual parts. Ideal also for children to tinker. Alternatively, you can fill the wheelbarrow with Easter eggs. One…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
What is Print in Place PLUS ? It's adding filament change stops to insert parts . Filament changes are set to 13.4, 29.6, 53.0, & 69.4 (for .30mm layers 69.5 ) Do not change color, instead just add tires and restart with same color. Tires…
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire. The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) . The rim is…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
A set of pieces to build a water wheel featuring wood texture and pass-through connections for detail. This is a great piece because it's easy to paint and detail (can throw some basic wood colors, drybrush, throw on a dark wash) and can…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
1/64 Diecast Car Display Stand: Compatible with Hot Wheels, Matchbox, and More! Fast and Easy Printing.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Držák je určen k uchycení brusných, řezných a brusných kotoučů o průměru 125 mm. Je možné potisknout střední trn nebo lze použít i bez trnu, například s těsněním. Držák lze umístit do skříňky na nářadí nebo do zásuvky. Dá se i…
Wydruk około 5,63 €–6,88 € nettoWstępna wycena jednego wariantu
Hot Wheels in scale 1:64 car lift. If your child likes Hot Wheels cars, you have to print this for him. :) I remixed this model from here: https://www.printables.com/cs/model/414288-hot-wheels-diecast-164-scale-4-post-car-lift I won't…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel.…
Wydruk około 2,65 €–3,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original rubber rings on my Logitech MX Master started to deteriorate and while replacing the thumb button with a 3D-printed replacement , I decided to replace the dirty rings as well. Added a knurling pattern to the ring for grip and…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
This is the result of the “3D Modeling in Fusion 360” course from Prusa Academy. I had previously written the wheel in openscad, which you can find here: OpenScad Wheel The uploaded files are made for my Wolf A4600 Lawnmower. This one is…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed sliced in half, then a touch of super glue. Edited from: https://www.thingiverse.com/thing:2378227/files
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Small steering wheel Audi.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Update History: May 8, 2021: Increased the robustness of the design by changing the thickness of the sails from 1 to 2 layers. See section “How robust is the wind wheel against wind and weather?” in the appendix for more details.…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stackable display for 1:64 scale cars. Fits most models but will require re-sizing if the car you want to store is slightly longer or wider than the one's shown in the pictures
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
Call them however you want – these mini fenders have a low-profile base, so your foot placement is not hindered with this add-on-top fender. Check out my Onewheel Collection – I have also designed charging port plugs for the Pint , mini…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes. They fit standard drill chucks, remember to use low speeds when polishing. The derby wheels I used have the following…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got inspired by the silent front roll (TPU) from nks . This is a remix to fit a Roomba S9+. Print the axis in PLA and the wheel in TPU. Then just replace the original wheel. No additional hardware is needed. Other Roomba models use a…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
20.1.2024 Another week point found. :) So here is version 3. Added rib to Slider to add overall stiffness Adjusted geometry of pins that push joy con buttons. Now you can feel and hear response when you push Paddle. bgcode and project…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! History These are the 3rd iteration Indego wheels I've designed, always learning from previous models. First…
Wydruk około 10,37 €–12,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Display stand to show off your coolest Hot Wheels on your desk!
Wydruk około 2,93 €–3,59 € nettoWstępna wycena jednego wariantu
A few people had broken the slim finger ring on the original so I beefed it up a bit. No supports needed, you may have to clean up the finger ring a little.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Wheelborrow to hold your rings. Some fiddle is currently required to get proper fit.
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
This model can simulate 3%/5%/7% incline for my bike. 7% is perfect for a Road to Sky ride. My tyre is 700C x 25mm, but it should be okay for 30mm. Material: PLA Infill: 15% Perimeter: 4
Wydruk około 11,88 €–14,52 € nettoWstępna wycena jednego wariantu
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Wydruk około 5,90 €–7,21 € nettoWstępna wycena jednego wariantu
I wanted bigger buttons for my CSL elite P1 wheel like those on my Clubsport F1 when the caps are on so I designed and made new ones. These should also fit the WRC and BMW wheel which replaced the P1 in 2021 These replace the stock…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
If you want to change the look of your board or if it is looking worn out, you can simply print another one.
Wydruk około 2,77 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
Wydruk około 11,26 €–13,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Used on Foxbody Mustang to calculate needed offset for wheels and tires after adding fender flares. Measured a 18x10.5" wheel and 315/30 (25.5"x12.5" Tires). Has the ability to test inside and outside offset measurements for…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
I modeled a toy train in dollhouse scale based on this toy I found online: https://www.littleobsessed.com/tiny-wood-train/ . I do not actually own this miniature so I guessed on the dimensions in creating this model. To create the train…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A piece for replace your lost tracks connector
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is an original #3dp design. This controller wheel fits your Prusa. And all other RepRap controllers. </b> I like the sturdy feel better than the original lever, so I thought I'd share it with you. Have fun with the steampunkish look…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Llavero con símbolo de Treasure Hunt de Hot Wheels. Imprimir a dos tonos.
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Simple wheels for 56x39x28cm size SAMLA box from Ikea. None solution from thingiverse worked for me, they are probably for different size or version of the box. So this was build from scratch in Tinkercad (feel free to edit:…
Wydruk około 1,72 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits to MK3/MK4 bed when placed diagonally.
Wydruk około 7,58 €–9,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mechanical parts are optimized to print of PLA, 0,2 mm layer height, on smooth PEI steel sheet could be printed without brim. Blades were 3D printed in two layers 0,2 + 0,15 mm height and 5 perimeters, I used PLA as well. Prepared model…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Wheels for the HP OTTO robot using a standard O-ring as a tire. Includes 3 designs for different themes: fire, space, and wooden wheel. For the tire, I used 2× O-ring 50 × 3.5 mm (R29 from a Parkside set). Kola pro HP OTTO robota s…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are plenty of fenders out there for the Onewheel XR, but not that many for aftermarket rails like the Floatlife Varials. Here is my version of a mini fender for WTF rails. Check out my Onewheel Collection – I have also designed a…
Wydruk około 7,01 €–8,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why I wanted a softer grip for the thumbwheel, so I split the model in two: a core and a grip. These can be printed seperately in different materials. I chose TPU for the grip, and PETG for the core. Printing & Assembly The print settings…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My original Onewheel Pint Charger Plug occasionally moved out or fell out of the socket and seems to break into pieces soon. Thus, I needed a replacement for covering the charging socket of my OW Pint. I ended up designing two variants. A…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wheel loader model add-on by https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Featured in the Prusa Academy Fusion 360 online course.
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
Introduction and Use Case This is a replacement for the wheel cover center provided by Tesla and other vendors for Tesla Model Y and perhaps other Tesla models. Printing I printed with two colors using PETG filament and began with yellow.…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a universal cap, it will fit many rim, in this case a set of 22" rims. Dimensions rim: 22" Center hole 83.5mm (3 5/16") Dimensions cap: Outer diameter 86.5 mm (3 3/8 ") Inner diameter 82.2 mm (3 1/4") Height 5 mm (3/16") If…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Great Replacement part especially because this part breaks a lot on whirlpool dishwashers. If you could add your user print files-the gcode files you use-to the user print files section that would help a lot of people when printing this…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since the MMU3 can have issues if there is too much tension in the filament, an easy upgrade to reduce friction is to upgrade the plastic wheels in the spool holders. Skateboard bearings are great for this. To use this, you will need to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
I created a simple clip to attach a spare wheel to the bonnet of the landy like the military vehicles and the ones who participated in the legendary Camel Trophy. in order to make it work you have to drill a 6,5 mm hole in the bonnet (see…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a VW-compatible 56mm wheel center cap , designed as a 2-part system for superior fixation and an OEM-like appearance . Model size: 56 mm (outer diameter) – common VW standard Common VW center cap sizes: 52 mm 55 mm 56 mm 60 mm 65…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to hide an Apple AirTag inside my Onewheel Pint S somehow, so I took it apart, identified the best location, and this is what I came up with. I had two goals in mind for this project: 1) Find a spot within the Pint X / S where an…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bike Front Wheel Riser Trainer Stand
Wydruk około 22,40 €–27,38 € nettoWstępna wycena jednego wariantu
Just a spare wheel holder for the awesome "THUMPER 1:8 scale RC CJ7 Rock Crawler by BlackCrow" To be found here: https://www.printables.com/model/323433-thumper-18-scale-rc-cj7-rock-crawler-by-blackcrow-
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
I found this nice model here in Printables https://www.printables.com/model/886832-subaru-wheel-lock-storage-box from zymurgtechnician and adapted it to my need Locks and key from my Kona seems to be a bit bigger than the Subaru ones. So…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nepalese Prayer Wheel
Wydruk około 14,20 €–17,35 € nettoWstępna wycena jednego wariantu
Of course there are several other Mag-Shifter Mods out there, but one of the main issues i had with them: They all relied on glueing magnets to the plastic. Which i think is neither nice to look at, nor very long term stable. Since these…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
Nachdem bei einer meiner Felgen der Winterreifen das Logo auf der Nabenabdeckung verloren gegangen ist, habe ich diese zweiteilige Abdeckung mit Teslalogo für die Felgen konstruiert. Sie sind für die Felgen MSW (OZ) 71 8.5x19 5x114,3 ET35…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
A simple wall mount made to hold the G29 Steering wheel but will easily fit other use cases
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Opony polecam drukować z TPU, świetnie się do tego nadaje. Resztę wydrukowałem z PLA. Przy druku z TPU lepiej wyłączyć retrakcję i jeżeli posiadasz drukarkę z ekstruderem bowden zmniejszyć prędkość drukowania do około 30mm/s.
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Immerse yourself in the world of automotive elegance with the Mercedes 190SL wheel, a perfect harmony of timeless style and unparalleled performance. This wheel embodies the excellence of Mercedes craftsmanship, combining quality…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
I've designed this “formula inspired” race wheel to fit the larger (70mm diameter) screw pattern on the Fanatec CSL Universal Hub V2, while wrapping around the buttons to provide a comfortable, but customizable steering experience. Neat…
Wydruk około 14,63 €–17,88 € nettoWstępna wycena jednego wariantu
This model is one from my extensive Children's Toys Collection . This gnome comes with his Easter outfit. It consists of 12 individual parts. Ideal also for children to tinker. In addition, I recommend to print the matching wheelbarrow,…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
![Bosch Indego S500 rear wheels V1 [personal use]](https://media.printables.com/media/prints/262266/images/2341224_aa5cc481-3db9-4bf3-88bd-520463c2462d/img_7759.jpg)
![Tamiya TT01 wheel hexes [different widths]](https://media.printables.com/media/prints/425363/images/3518554_bf45835a-4fb6-46ab-9f83-35d3528e8070/20220117_114136.jpg)
![Bosch Indego S500 rear wheels V3 [personal use]](https://media.printables.com/media/prints/1069813/images/8094042_1fec11c3-dd73-4986-9626-ae3e86a58bb2_bd3de1f2-34cd-4467-88f9-d89688f4fe08/schermafbeelding-2024-11-11-164808.png)
![Hyundai Kona Wheel Locks or Nuts Storage Box [REMIX]](https://media.printables.com/media/prints/890297/images/6818167_b95ff9f1-ff3f-40d3-8ce2-ee5109c5818a_aec615e0-3ea9-408b-bd29-080ceb598f09/hyundaiwheellockbox-jc-comp.jpg)
