243 modeli
This is an improved version of my previous model https://www.printables.com/model/659917-wired-earbuds-holdercase. Has a better grip, but has the same dimensions as the previous one. Ideal to store you wired eardbuds. Printed in PLA…
Wydruk około 2,66 €–3,26 € nettoWstępna wycena jednego wariantu
Plate locks the Nest doorbell down, replacing included metal plate. Use the key: https://www.printables.com/model/466189
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This extension mount helps get your Ring Wired Doorbell Pro (Video Doorbell Pro 2) into the right position when your door frame is further back than the adjacent siding. By bringing the doorbell flush with the siding, you'll get a much…
Wydruk około 3,35 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for a commercial made vinyl siding bracket to mount an Arlo wired video doorbell but could not find one. So I made one. I’m including a step file for anyone that wants to mod this, should make it easier. I used 4 perimeters…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my newest battery bank using 25 Telsa 21700 5amp cells. This is updated with cable channels added for easier cable management! Heat Shrink tubing application. https://www.youtube.com/watch?v=gLj-ytjKPAI&t=18s
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
Identify your controller so you won't mix it up with someone else's, or identify your children's controllers so they stop arguing about which one to use. I know tape usually does the trick, but I don't like getting glue on my wires it's…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
This is a wired hand control box for ONSTEP telecscope GOTO system. Note that there are various momentary tactile push button switches, and one needs to modify those caps for his own choices. (e.g.,…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is also editable on Tinkercad This model is only for the TKL keyboard (the one without a number pad), if you have one with the number pad, the circuit board will not fit into this box. !!! C plate must be printed with 0.1mm…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
A quick remix to enlarge the hole in the top of the grip. This allows for the wired variant's USB cable to easily slip through without needing to file the edge down. Also compatible with standard generic USB SNES style controllers I…
Hi! Didn't find any 'Wired earths' so i do some tests in Blender. Now i have four versions. Two icospheres (simple and smoothed) and two UV spheres (simple and smoothed again) There is 4 files with full spheres and 8 files with the…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
Do you have a tangled mess of wired earbuds lying around? This is the solution. This is a wired earbud holder. This earbud holder is for storing earbuds long-term. If you would like them or short term solution, try the other Wired Earbud…
UPDATES : 29/09/2024 : Vial file “big_num_vial.uf2” added. ____________________________________________________________________ Context: BigNum is part of a series of projects I've recently started, all focused on custom mechanical…
Here is the file for “Wired” A Grim model from the Dark Corners of my imagination, This started off as a thought, When connecting a person to a machine, what is the point were you stop being augmented BY the machine and become an…
A quick, printable way of shifting your wired Google Nest Doorbell out of the way of a wall or doorway. With the doorbell's wide FOV, you'll be able to see it all. This is a Google Nest doorbell adapter for the wired, second-generation…
Description *There are two versions : one with the same design on the back, but which does not work with apple watch wireless charger, and another one with a thin back which works for wireless charging . ( tested it personally with apple…
Do you prefer wired earbuds because of their crisp mic recordings but hate the tangles? Search no more! This holder is designed to keep the earbuds and the mic in the central cavity, protecting them from impact while keeping the wire…
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
Go to original for overview https://www.printables.com/model/545103-google-nest-video-doorbell-mounting-bracket-batter
The one showed in the pictures is the 60° angle bracket. The other ones (45° & 90°) are also available as downloads. Hardware needed: Heated inserts (2x) M3 (OD 5mm) Length 4mm M3 screws (2x) Length (min. 10mm - max 22mm) Prints perfectly…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google Nest Doorbell, 2nd…
This is my self-designed, 3D printed, handwired, mechanical keyboard. It's a 75% layout with clickable volume knob and runs on QMK Firmware, so you can reprogram it to whatever you like. This is an extremely involved project and is too…
I highly recommend trying to build my new and much improved keyboard design over this. Check it out here: https://www.printables.com/model/1177451-65-key-handwired-keyboard Check out the full build instructions here:…
This is a quick print to make a small color-coded identification ring for multiple Shure SM58 microphones. It will only fit the wired version of the SM58; the wireless variants are larger, and other people have made identification rings…
Wall mount for wired Xbox 360 Controller, with cable hook. Test print of v1 would work well for a wireless controller, however on the wired version, the cable is too close to the wall and doesn't sit well. also the hook was too small to…
Check out the full build video on YouTube! IMPORTANT TO KNOW : This project WILL require customization from YOU to adjust the design for the specific keyboard layout in your country. You will be required to modify both the keycap files,…
The 15 degree shim that comes with the Eufy 2k wired video doorbell isn't enough to get a good view at a right angle from the wall the doorbell is mounted on. This 35 degree shim gives a perfect angled view. Print instructions Since this…
There are 3 versions: 1. Flat Plate (print with face down and support only on chin and counterbore) 2. Flat Plate with no counterbore (print with face down and support only on chin) 2. 45 degree Plate (Print on the side that will be in…
Remixed the excellent design from stingray127 with a few tweaks in order to make installation slightly easier. Added an angle for the horizontal wire so that they stay put and avoid the vertical wires of the matrix. With the above…
A handwired version of the kyria keyboard by splitkb.com A split ergonomic keyboard with 50 keys and a columnar layout. I printed at 0.2mm on an ender 3 max with 999 top layers to make it solid. Github:…
Inspired by SnazzyLabs' Touch ID module , I started from scratch to build my own version of the case. I had two main goals in mind: it should be easier to assemble and disassemble if needed, so it shouldn't require glue nor melting any…
Das ist eine Halterung für die Ring Video Doorbell Wired mit einem Winkel von 30°. Klar man hätte auch von Ring direkt eine “Corner-Kit” kaufen welches aber 21€ kosten, was mir für nen Stück Plastik viel zu viel ist… Also habe ich es mir…
Basics definitely print with supports, some really not nice overhangs otherwise the USB cutout should fit all kinds of MCUs, with or without sockets no need to smelt the M2 nuts in like in the original repo anymore mirror the parts for…
Do you have a tangled mess of wired earbuds lying around? This is the solution. This is a wired earbud holder. Print Instructions Material: PLA or PETG Supports: No Orientation: Place the bottom flat on the build surface Usage All you…
I often buy headphones when I travel. I buy wired headphones because they don't need charging, but the wires get tangled in my bag. So I designed a small case that can keep them organized in my bag. The hinge is a print-in-place structure.
For people who dont have the magsafe charger .. Standby Mode dock only for iphone 16 with case/cover wired. Short in length and Fast print (Around 2Hours) . Might work without supports. Inspired by the Scott Yu-Jan Dock Design. Added a…
The PetruziaMini is my first handwired ortholinear mechanical keyboard, fully 3d printed (except switch, cables, screws and controller obviously), inspired in the number of keys and keymap from some 34/36 keys split keyboards (like the…
ergonomic mouse grip
Print as shown below. Assemble with a piece of print filament.
I made this because the Furrion camera system for my pre-wired RV is too expensive but the cheap metal mount that comes with the Amtifo system looks really cheap. I am sure this will fit, but I don't have my trailer yet to make sure.…
Summary Nest indoor mount.stl is an alternative to the plate included with the camera. Ensure you print with supports on. Nest indoor mount threaded.stl is meant to be used with a 1/4" threaded insert, allowing you to attach this camera…
If you don't have a phone with wireless charging, the phone tray on a Tesla Model 3/Y doesn't work well when charging a phone. The charging cable on the bottom of the phone doesn't clear the tray, which makes your phone slide all around…
I need an angled spacer so that this would fit on my house's siding.
This is a hand wired keyboard. Please be familiar with the process of hand wiring before undertaking this project. Inspiration for this project comes from this hero . Features 5° typing angle Low profile front height Supported layouts:…
✨ Description: The Gold Crown of Barbed Wire is a symbolic and artistic representation inspired by historical and cultural references. This unique design features interwoven barbed wire patterns arranged in a circular crown shape,…
A friend of mine lost one of his 2 Ikea Nymane wall fixtures while moving. Since the fixture plate is not sold separately I recreated the part 1:1 in Fusion360 (with a little bit sturdier base plate) without the spring-loaded movement.…
Simple belt clip for jack 3.5mm cable intended for stage use for wired in ear monitoring. The inspiration for this print was this belt clip from thingiverse .
I could not find a spacer plate for the Google Nest Hello Gen 2 Wired Door Cam and instead I only found options for the battery edition. So I picked the best looking one I could find to use a template and created three different plates to…
The first layer is 0.15 The remaining layers are 0.08 Width 0.4 3 perimeters Filling in 100%
Remixed this mount to make the fit a little bit better to include: Shaved top sides Variable screw angle More depth for screw mounting location & silver pucks (see model - not printed example)
These are two angled spacers to be used to mount a basic 2021 wired Ring doorbell to cedar or vinyl siding. One of the spacers will have the doorbell facing straight out from the face of the siding and the other is angled 15 degrees to…
Print two of these brackets to hang your Xbox One and Xbox Series controller.
0.2mm layer height works fine for all the stls but you might want to use a finer one for the plates and a thicker one to make the case print a bit quicker. the holes are for m2 screws. I printed the bottom plates in transparent filament…
The Rebel XSi DSLR on the shelf had not been used in at least 5 years and the original battery pack was long dead. The Canon official wired battery replacement or new battery packs have been out of production for years. I could buy a…
This is a riser stand for the Google Nest Cam (indoor, wired) https://store.google.com/product/nest_cam_indoor?hl=en-US Models for various heights are provided. If you print one of the taller sizes, you might want to use an infill for…
Holds 1x 18650 battery. Has mounting holes spaced 50mm apart. Mounting Holes suitable for M2.5-M3 screws.
because of my aluminum doorframe i couldn't just screw my ring doorbel in the frame and had to come up with something myself. its an easy mount for the brick wall next to the doorframe, just 2 srews in the brick is strong enough to keep…
I was inspired by the SiCK-68 but wanted a tenkeyless layout, so I designed it from scratch. Here are some other features I added in my design: Case holds plate at a slight incline Threaded inserts are used for the case-closing screws…
There are TWO versions of this one in the model section: Wired version, slide in and connect to a general usb c plug. I made this for a generic usb c plug, but they are different thickness so you might need to adjust the height of the USB…
Here a bezel to cover 67/68/80mm wallbox made specialy for the wired version of the Ring Doorbell.
A box for wired headphones that prevents tangled wires. Krabička na drátová sluchátka, která zabrání zamotání drátů.
Plate using outemu hot-swap socket holders to make a handwired hot-swappable Mechanical Keyboard Numpad m2 screws hold the sockets in printed at .3mm layer height
Remix supports the wired version of the mouse, slides over the strain relief and fits snug. Like with the original can add some mouse feet or as I did 2 layers of electrical tape which works much the same.
This model provides a bracket for mounting a Ring Gen 2 Wired doorbell on siding with the common 1/2" step every 4" of height. The model fits between the siding and the bracket the comes with the doorbell, allowing the doorbell to remain…
The mount that comes with the doorbell screws into this wedge mount, and you can use the same Ring screws (although maybe they might need trimmed a bit). However, I used the Ring doorbell screws to attach the wedge to the wall, then used…
Remixed the clamp portion to have 3/4" female NTP threads so I can use it with an NTP Loc-Line base. More tricky to setup since you need to run the wire through the hole at the base before soldering it together. I also used some adhesive…
The 2024 core (+ any module) ships with the “SAM” or “Smart Assist Module”. Its oddly shaped and needs a home. So too does the large wired charger. I want both accessible, but I don't expect to use them often, so why not print up a…
I have a few Woods Hard Wired Mechanical Timers in my home and one of the plastic knobs broke so I took it as a chance to model it and make a replacement. I think the model I have is often sold at Menards (Midwest Home Improvement…
I recently picked up a used RockBand Fender Stratocaster (I believe first gen) and wasn't happy with the mushy feeling strum bar. This adapter fits where the magnetic switches are placed and allows you to insert a Cherry MX compatible…
Backplate for the 2nd gen wired Google Nest Doorbell. has a 4° tilt down and no tilt either direction
This is a hardwired numpad on the bases of a Seeeduino Xiao. The parts have to be solderd accourding to the diagram, in order to get it working with the provided code for the XIAO. In order to program the XIAO, you need the Arduino IDE…
Seats are designed for DUROCK MX Hotswap Sockets. The test print stl is to calibrate your settings for everything to fit before printing the entire bottoms. I also used hot glue to give some extra security to the sockets.
More pictures and details on the project repo: github.com/terryorchard/keyb/torchnum This is the STL for the body of my custom numpad / macropad. Instead of the traditional “tenkey” layout I went with 19 keys + a rotary encoder for CW and…
A 48key column staggered split handwired keyboard. Design files are included, please design your own Decals and Badges. Make it your own board! Bill of Materials - BOM 2x Waveshare RP2040-Zero 2x TRRS Jack 48 switches - ( I used these ,…
I needed a door to hide all the network gear in my Kallax. John Makeshift already had a “WiFi” version so I designed up a wired network version!! Thanks John. You'll need to download the original to get the handle and beams/frame. Printed…
I used 3 xiao ble microcontrollers, one for each side plus one for an optional dongle. The NFC pads on the microcontroller needs to be used. Each switch needs a diode. Optionally you can use kailh hotswap sockets. The batteries I used are…
I needed a box to cover some wiring. Later, I realized that I needed a slightly bigger box. Ultimately, I decided to run a script to create many sizes and post them here. The two parts print without supports, they snap nicely together and…
I used this adapter 5v>3v: https://www.amazon.com/gp/aw/d/B081R5N396?psc=1&ref You’ll need to snip off the clamps and run those stripped wires to their respective terminals (red> positive, black>negative). Small conductive screws into…
This is a Flat Ring Wired Doorbell mount with Weather Sheild its only basic but does the job. Print from ABS or ABS+ Required Parts: Wood screws for wooden door frames Raw plugs & masonry screws for concrete or brick Supplied mounting…
I did not care for the original stand so I created my own simple stand for an excellent and fun to print model. Very simple and easy to print.
Based upon another model but I built this version from the ground up: https://www.printables.com/model/925614-cr2-wired-battery-replacement This variant has 2 separated entry points of the cables, less shorting. I've adjusted the…
This is a case for the GNAP2.0 pcb of 40percent club, you can find more information about the PCB here: http://www.40percent.club/2016/10/gnap-20-plateless.html and here:…
This keyboard aims to expose the beautiful Raspberry Pi Pico microcontroller. It has aggressive pinky column staggering, which resembles a Piantor keyboard layout. For the BOM and Build Guide, check out the Github page . Printing Guide…
As I said in TheDroppelganger summary (https://www.printables.com/model/299771-thedroppelganger-a-filco-compatible-87-key-mechani) I love my Drop CTRL - and if i was a very rich man, i would own all the variants...but i'm not...so I did…
The original design was a screw mount. I added 2 holes for cup hooks and filament guide. the guide can slide back and forth to match the OD of the spool. you're gonna need some screws and nuts to attach the filament guide. cup hooks you…
Magnets: 4x Neodymium Magnet 10mm x 3mm - the stronger the better Important information: The Nest Cam is quite heavy so be sure to carefully mount this adapter to your magnetic surface! The adapter may slide down, especially on smooth…
I had a Ring doorbell which takes up a larger footprint than the Ring Wired. Instead of redoing all of the brickmold, I chose to make this. The holes on the right side align with the previous ring doorbell mount plate as well. The left…
A replacement lid for the classic Daikin BRC1D52 wired remote control.
Two functions 1. Store the iPhone earphone in a bag or pocket without getting tangled or knotted. Plug and headphones completely hidden. 2. The cable has a length of 1m30 ~ which can in some cases be useless and even cumbersome. Plug and…
Info: created a base for pieces of wire, because: wire is industrial standard for usual anti-bird spikes and wire spikes are much less visible from distance than anything printed, thus it is better to print only base and buy wire this is…
A case and plate for a handwired Lily58 split keyboard. Here is the GitHub repo from the original design. I built my version using a RP2040 Pro Micro. For interconnect I used DuPont connectors because they are very easy to find and they…
Info: variation of original organic stem for 7cm rose 🌹 in vase mode since original stem broke for me very quickly 😅 I tried reinforcement stem is hollow at the end of print, insert 14cm long (max) and 2mm thick metal wire Print info:…
This is a custom case designed specifically for the v4/4.1 wired Corne keyboard in the 3×5 key layout . It assumes you’ll be using two OLED displays in place of the additional two outer keys supported by this Corne variant. If you're…
I was having trouble with the right angles of the original base snapping off with my supports when printing. I had gone through three different attempts before deciding to just remix this so that it doesn't require supports. I gave it a…
Bill of materials 17 Cherry style, plate-mounted switches, for example Kailh Box Jades . 17 numpad keycaps salvaged from el cheapo keycaps set . 17 1N4148 diodes 3 2u plate mounted el cheapo stabilizers . 10 M1.6 x 5mm self tapping,…
Original Description: “ We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google…
This is a case for the Contra 40% mechanical keyboard ( https://cartel.ltd/projects/contra/ ), but can be used for handwiring as well, because the plate is pretty thick. The Contra PCB requires sanding to fit into the case. Process for…
This is a Basic mount for Ring wired doorbell angled left and right. (flip the print so the narrow side is to the left to angle the doorbell to the left do oppersite for it to face your door if placing on the right of your door) Must be…
