140 modeli
Print-in-Place Hinged Box for 4x CR123A Batteries Compact, one-handed operation storage box for 4 CR123A batteries (or CR123 or RCR123A or 16340) with an integrated hinge. Optimized for one handed use. Materials needed: 2 x magnets (size…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED 7/11/24] “Fishie” the fish-themed shoe…
This model is compatible with the lego system.
The Messerschmitt Me 163 Komet was a rocket-powered interceptor fighter used by the Germans during WWII. The Me 163 used a HWK 109-509 bipropellant rocket engine, fueled by hydrazine hydrate and methanol. This fighter engaged against…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Messerschmitt is very realistic Print in place kit card , Assembly required
This is a remix of a great project. Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-dasai-mochi#profileId-1970817 I added a 16340 Li-ion battery and a TP4056 USB-C charger. You'll also need an SS12D00…
Messerschmitt Me-163B Komet
This is based on my CR2032 coin cell holder design, with the following User Parameters changed: cell_diameter = 16mm cell_thickness = 3.2mm See the original model under “This remix is based on” for Fusion360 source file. If you don't have…
This is the clock module for which the model is designed: https://smile.amazon.com/gp/product/B078J577PL
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION !!! Hello Everyone I have designed battery holders for CR123A / RCR123A / 16340 batteries using ready-made contact plates, which can be purchased…
This model is compatible with the lego system.
Print off a piece of history, one of the greatest ideas, can now be printed in less than 10 minutes and only uses 1 gram of filament!! A Great Documentary About The Komet… Support Dark Skies by subscribing for this great documentary For…
Ständer für Perplexus mit Durchmesser 163, mit 70 Punkten. In die vier Ecken habe ich jeweils selbstklebendes Filz als Schoner für die Kugel eingeklebt. Das Filz gibt es z.B. hier:…
A caixa para baterias 16340 é um acessório útil para quem usa baterias desse tipo regularmente, seja para fins pessoais ou profissionais. Com ela, é possível manter as baterias organizadas e seguras durante o transporte e armazenamento,…
See it in action https://www.youtube.com/watch?v=UKWGT0Ywonw My ESPHome Code https://gist.github.com/kdorff/046ddc1ad3c481aeb2b18e511e84b289 I've been playing with the TM1638 and ESPHome and wanted a case for my project. blwn 's TM1638…
This is a makeshift HP-163 connector I made to power an old HP 5245L counter I bought from a retired electronic tech. These connectors are nowhere to be found these days unless you want to pay through the nose for a "vintage" cable on…
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR1632 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
Box for TM1637 modules. Is possible to stack multiple modules using m2 screws. The design has conduits for the cables. The back cover uses m2 screws and nuts
Case for CR123A or equivalent 16340 rechargeable batteries. Internal dimensions: 34 mm (+0.6 mm for battery pin) x 17.2 mm (diameter). Please note that some 16340 rechargeable batteries may not fit, particularly those with a USB-C port.…
This is a simple design to mount an Arduino Pro Micro and a TM1638 display for sim racing. It mounts to most Logitech racing wheels since they all use the same mounting wheels. I wouldn't recommend Resin printing like I did because the…
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!…
Model of this: https://smile.amazon.com/gp/product/B01DKISMXK Category: Electronics
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR16XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Printed in ABS, printed the bottom part a little to fast, but still strong enough to use.
I didn’t print this myself yet, but while installing the original part I came up with a few improvement ideas. Update (11-02-2026): Uploaded Revision 2 added few radious to improve rigidity added .stl version since the step version had…
This is a dual 16340 size battery holder. It uses slide in battery clips. Print instructions Category: Hobby Instructions Using the following options: Battery_Size = 1 Mount_Hole_X_Spacing = 40 Cell_Count = 2
Coin cell battery holders made to fit in C and D battery dimensions. Designed to add cell batteries to unused C/D slots in a battery organizer. Currently supports: CR1632 CR2032 CR2450 LR44 These are the batteries I use so that's what I…
You can buy these from me here! Consider supporting us on Patreon! These 16340 battery holders with a screw lid are incredibly tough and rigid! Designed for use with unprotected button top and flat top cells. Print the bodies out of PETG…
Battery holder for 16340
I was thinking of a secure and safe way to store batteries in my range bag for optics, flashlights, etc., and came up with this design. It holds four 2032s, four 1632s, and one 123 battery. The inner racks keep the flat batteries from…
Press fit lid. The display needs to be attached on the inside of the lid, two drops of hot glue should be fine. No pre-made hole for cable, needs be drilled.
This is my first extension and publication for Gridfinity community. Great thanks to all of you, a just did my own module. A 1X2 CR2032 and CR1632 battery holder. Special thanks to https://thangs.com/designer/whoistobias for his Battery…
The handle for adjusting the seating position was broken off. A replacement had to be found. I hope you can use this thing. Der Griff zur Einstellung der Sitzposition war abgebrochen. Da musste Ersatz her. Ich hoffe Ihr könnt das Teil…
These cheap LED&KEY modules are all over ebay and aliexpress. The TM1638 chip uses a non-bus serial protocol. I made them into an I2C target (slave) device by adding an ATtiny85 which runs my I2Cwrapper firmware with the TM1638liteI2C…
If you have old Andersen windows and the sash lift in the bottom pane broke, here's a model for your replacement. It has a good fit - not perfect, but I was happy. I tried to replicate the original as close as I could. Printed it with…
Frame pieces, for mounting a TM1637 in foamboard. Category: Electronics
Print with no support
16340 Li ion Battery Holder for use in place of 3 AAA batteries. I have a couple of outdoor lights that use AAA batteries but the AAA don't last long so I created an adapter to replace the AAAs with a 16340 Li-ion battery. I used an…
They should all fit in with friction. The SB8163 gets hot so give it plenty of room and air flow. For the Unifi Lite, use a zip tie. It works ok.
Needed a cr2032 battery but only had a cr1632 so I made this. Category: Electronics
02-06-2025 UNW-T6 outer barrel options added --- as part of the big V24 update. the 14mmccw barrels have been made a bit stronger - 14mm CWW barrel tips have been added --- these are the 2023 versions of the Outer barels for the FGC6…
Easy wall mounting for your Worx WG163E Trimmer. Mounts to the wall with 3 screws. The mount holds the WG163E by the foldable handle. Printed in JAYO PETG with 3 walls and 15% infill. No supports are needed. Print as oriented in the file…
CR1632 see remix for other batteries
this my latest shroud design and maybe even my last for the FGC lineup. but I have thought this before so who knows. the 2 piece design makes it possible to make it less bulky then the older designs. and the M-lok gives you a lot of…
This slammed duct is designed to fit the Cloud-149, 149HD and Brave 163 drone frames (which apparently have the same mounting hole positions). The inner diameter is 78mm which gives about 1-2mm of prop clearance when using Nazgul Cine…
To fit CR 1632 cellls in to CR2032 battery slots
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I love the LYWSD03MMC temperature and humidity sensors from Xiaomi because they have a compact size, a…
I built a mini clock using left over three TM1637 clock modules and a mini Arduino ESP8266. The clock gets real time from wifi. I have it scrolling three cities to which the time zones correspond. I have included the code I used. Print…
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!…
I have enclosures to work with ProMicro and NANO boards as well a a generic version that is trimmed down. TM1638 comes in 2 versions 1.12 and 1.13. They are physically different and only the 1.12 would work with the original. I also made…
I made a 4Pack Bottle Holder (4x0,5l) with a redesigned Handle. It takes 4 Bottles in 2X “Fridge Organizers” : https://www.printables.com/de/model/567994-fridge-organizer-bottle-holder The Handle is a remix of :…
this is the shroud set is based on the FGC-9 MKI shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to…
An ultra-compact CR1632 holder that can slip into a pocket or other small compartment. Holds 4 spare batteries while taking up very little space. The two halves are friction fit and stay together reliably while still being easy to peel…
CAD model of the Kobiconn DC power jack Manufacturer Part Number: 163-4302-E I found this part on Adafruit ( https://www.adafruit.com/product/610 ) and did not find a model of it, so I made one. Not sure if the part is 100% accurate or…
Hi Internet sim racers.... on request about some of my older Youtube videos... I've dug up the old STL's from my SimDash V5... updated it to include the pro micro mount and flash uploaded them all to thingiverse. I've ran through the…
I need to store my ibuprofenium near me, and since I am caring an Olight Perun 2 mini with me that uses 16340 batteries i designed this to fit besides a spare battery in the holster i designed.
This duct is designed to fit the Cloud-149, 149HD and Brave 163 drone frames (which apparently have the same mounting hole positions). The inner diameter is 78mm which gives about 1-2mm of prop clearance when using Nazgul Cine 3040…
PLA, 100%infill, střední (mid) část čelem k podložce a se supportem pod čelem. Příprava v trupu je vyosena doprava, proto je kapota (hood) ukončena pod úhlem, značku (otvor) směrem doleva po směru letu. Lože i kapotu jsem lepil UHU por,…
In order to print this thing super quickly, I wanted to use the 0.8 mm nozzle on my Flashforge Adventurer 5M, so I had to “beef up” the thickness of the sidewalls where the slots are for the attachment tabs. I also slightly tweaked the…
Dies ist mein Knopfzellenspender für CR2032 CR2016 CR1632 Gedruckt in PETG Layer02 Speed 80mmsek
I created a small and basis Arduino case which also holds a 16340 battery and has some room left for sensors. Print Settings Printer: Fabrikator 2 Mini Rafts: No Supports: No Resolution: 0.2 Category: Electronics
Basic feet for a TM1637 0.56" display. I used them on this project : https://www.pcbway.com/project/shareproject/ESP01_TM1637_NTP_CLOCK_8fbf9836.html Make sure you also have 4x M3 insert nuts and 4x M3 x 15 - 20mm screws . Can be printed…
Small enclosure with room for a TM1637 (4 digit 7-segment display) and a WeMos D1 Mini. Printing: print it sideways (see picture 3) so that the front is on the bed with supports. Print Settings Printer Brand: Prusa Printer: i3 MK3…
This is a 3D-printable version of the FEL-PRO 16300 crankshaft sleeve installation tool. Used to install the FEL-PRO 16250 crankshaft rear main seal sleeve on engines like the legendary pushrod 5.0L Ford V8 (among others). The center is…
This is my first 3D-modelled design. It replaces the grey cover for the sliding door. It's for a Volkswagen Caddy (2004–2008). It's slightly thicker than the original part due to the additional insulation on the door.
The QHY163M COLDMOS Astronomy Camera is a $1100 USB3 camera with a 16MP cooled monochrome micro Four Thirds (MFT) CMOS sensor. It comes with an M42 thread about 18mm from the sensor plane, which is short for M42, but unfortunately too far…
This landing gear replacement is for the Hobbyking ME163 red version. Maybe it will fit for the original "green" version too. At the moment, it is a work in progress, meaning the upper part may be to thick for the ME163. My first version…
2x2 Gridfinity battery holder for CR1632, CR2025 & CR2016 batteries. Includes coloured labels as separate parts for easy painting. The bin is 30mm high when measured from the drawer base. Printed on an MK4s with an MMU3 in Spool3D matte…
This is the IKEA Skådis holder for CR1632 button cell batteries. I designed the holder to be compatible with different battery sizes and allow the holders to be perfectly placed next to each other on the Skådis board. The different sizes…
BLANKING PLUG – T3 | LT1 / BRAKE BACK PLATE / REAR All T3 models and LT1 models including 4×4 replacement for VW part number 113 609 163 This is my design 100% print with TPU 85A
This thing is for carrying four photo cells (ICR 123 or LC 16340). I use it to store the cells for my old FENIX P20 flashlight. You will also need: M3 x 20 mm screw M3 hexnut 4x neodymium magnet (h: 3 mm , d: 6 mm) some glue to fix the…
ARTE&DISIGN GT163 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
cool miniature model of the Me-163 aircraft from Messerschmitt, a German aircraft maker. interestingly enough, it was powered by a rocket instead of the conventional engine! And, as such, it was named 'komet', similar to comet...
A simple container for six CR1632 batteries.
English: As I am currently building a pinball machine, I needed appropriate holders for the dual coils, e.g. for Williams/Bally FL-11630, FL-11629 . I couldn't find any here, so I quickly constructed some. I won't install them until…
This model is designed as a mountable case for the TM1638 control panel , allowing it to be securely screwed onto a flat surface. The design includes functional button cutouts for full access and usability. The height can be easily…
This is for holding the Harbor Freight 29 piece titanium drill set (61637) to the wall. It has two holes for screwing it to the wall. I used square drive Kreg screws but drywall or decking screws will also work. Be careful not to…
This model was made to be as cheap and print quickly. You do not need supports. You should be able to drop it in and print. I used PLA and a single dry wall screw to put it in my wall. There are extensions to allow you to hold to…
Replacement of original mounting ring for LEDBERG round light from IKEA Printed lying on mounting eyelets, with standard supports for upper ring. Light just snaps in like in original. My print is printed as draft 0,28mm layers with the…
The original Carson Magnifier Head Light runs on 3xAAA batteries that take too long to charge, so I made this mod that houses a single 16340 / RCR123A Li-Ion battery instead. Rechargeable li-ion batteries have more capacity and take just…
Adaptateur batterie 16340 idéal pour les diy maison
Very sleek and forward storage "boxes" for my main house battery cell types used: 1616, 1632, 2016, 2025, 2032 They are designed in freecad and mostly parametric so you could easily extend them. There are embossed celltype-numbers so even…
I created this parts to replace the old one on my Mercedes V-Class W638. I printed them with PETG 0.1mm and it works proper
A compact case for a WiFi clock powered by an ESP32 and a TM1637 display module. Firmware, wiring, flashing instructions, and source code are available on GitHub. The firmware supports WiFi time sync, automatic daylight saving time, a…
Wickelhilfe für den Schneidfaden des Rasentrimmer von Worx Typ WG163E. Einspannen in den Akkuschrauber und schnell wickeln. Extra Spannflächen für das Bohrfutter (Ø 10mm) Translated with Google Winding aid for the cutting line of the Worx…
Doppelbox für CR1632 + CR2032 KnopfbatterienDoppelbox für CR1632 + CR2032 Knopfbatterien. Mit oder ohne separatem Textinlay druckbar.
Gridfinity box for CR1632 coin cells. Three versions, all with half grid base (fit normal Gridfinity grid) Hi version, stackable Mid version, probably not stackable Low version, not stackable
I designed a tail attachment, because I start my ME163 on the street, therefor the wooden tail section got "polished". I designed two version, one with a M2.5 in the middle (shown on photo), so it lasts longer, and one version without.…
Compact case design for TM1637 display modules, perfect for digital clocks, counters, and interactive installations. Features space for three displays, tactile switches, colored LEDs, and an Arduino Nano, secured and easy assembly. A…
Made this to be able to mount a deta 1163 smoke alarm and hide the hole left by the old alarm.
This enclosure is designed for DIY clock and display projects using a TM1637 4-digit LED display and a Wemos D1 R1 (ESP8266) development board. TM1637 modules are commonly used for digital clocks and numeric displays with ESP8266-based…
I needed more protection cover like the hager - KZ059. So i made one using as model the original KZ059 i had. The result fits perfectly, like the original one. I printed it in PETG as it's quite flexible Edit: Added the neutral protective…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Replacement Eccentricity Link for Ryobi 16" Scroll Saw SC163VS. This part is no longer available for purchase, so I made this up to do the job. Replaces Part Number: S16020021 I used a vise to press the bearings into the link. Print…
