P
PrintablesSergey Morozov
Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case
You shoul use a 4 M3x10 screws to secure a screen to the case.
- Pobrania
- 1571
- Polubienia
- 56
- Ocena
- 5
Wyniki wyszukiwania: 7i
Liczymy pasujące modele…
P
PrintablesDavid Smith
Waveshare ESP32-S3 7inch Capacitive Touch Display - Tabletop case
The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…
- Pobrania
- 767
- Polubienia
- 30
- Ocena
- 5
P
Printables3D_Project3R
Waveshare ESP32-S3 7inch Capacitive Touch Display Case
This is a remix of https://www.printables.com/model/1030369-waveshare-esp32-s3-7inch-capacitive-touch-display. The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. There is a cutout…
- Pobrania
- 686
- Polubienia
- 23
- Ocena
- 0
P
PrintablesDoug Joseph (design8studio)
DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC (v1.0.0)
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
- Pobrania
- 605
- Polubienia
- 30
- Ocena
- 0
P
PrintablesJLeyva
BMD 7inch video assist stand
A tabletop stand for the 7 inch models of the blackmagic video assist monitors, both 3G and 12G versions
- Pobrania
- 494
- Polubienia
- 30
- Ocena
- 4
P
Printableshackerbijay
Display mount (Cover)7inch HDMI LCD , 1024x600
7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…
- Pobrania
- 488
- Polubienia
- 30
- Ocena
- 4,75
P
Printableseponra
Small Mini Sanding Block - chamfered and 0.67in / 17mm wide
Another Remix, just because one of the standard sizes in germany for sandpaper (230mm x 96mm) lets me cut 2 sandpaperstrips out of it, but lets me with one strip of 230mm x ~16mm left. And so i decided to make a shortcut version of this…
- Pobrania
- 480
- Polubienia
- 89
- Ocena
- 4,63
P
PrintablesShaggyx86
Raspberry Pi 7in Touchscreen Wall Mount
This is a wall mount for the Raspberry Pi 7" touchscreen. I originally designed this so I could replace my old alarm system panels with a central control panel for Home Assistant. It also has a DHT22 sensor so I can monitor temp/humidity…
- Pobrania
- 408
- Polubienia
- 49
- Ocena
- 5
P
PrintablesBoA
Waveshare 7inch display for RPi/RPi zero enclosure with vesa 50 or 75 mount
Waveshare 7inch display for RPi/RPi zero enclosure with VESA 50x50 mount. You will need: 8x M3x3.9x5.7 inserts (Ruthex M3) 8x M3x6 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better 50x50 mount strength, mount M4 inserts from the…
- Pobrania
- 353
- Polubienia
- 47
- Ocena
- 5
P
Printablesntressler7
7iDP Project 23 GoPro Mount
This design uses a single 8in zip tie for attachment to the helmet. I also put a single strip of electrical tape on the side of the mount that contacts the helmet to help keep it from moving around while riding. Printing Instructions…
- Pobrania
- 304
- Polubienia
- 20
- Ocena
- 0
P
PrintablesDaveOfTheDead
Simpsons TV / RaspberryPi case Remix 7in screen plus backlight fan and USB
Had someone ask me to build a Simpsons TV but larger than ones already online. So after some searching I found the 3.5 inch version to be best for my needs and scaled it all up to 1.712 then added some brackets to the front face to fit…
- Pobrania
- 290
- Polubienia
- 61
- Ocena
- 0
P
PrintablesBryan
Mesa 7i76E din rail mount
Mesa 7i76E dins rail mount with Solidworks 2016 file This file is to be used with the din rail clip located here: https://www.prusaprinters.org/prints/64242-din-rail-clip
- Pobrania
- 268
- Polubienia
- 18
- Ocena
- 5
P
PrintablesoXiVanisher
Storage case and stand for 7inch HDMI screen
This storage case doubles as a stand for a Waveshare 7inch Capacitive Touch Screen LCD . 4x M3 x 8 mm socket caps screws for the main case 6x M3 x 8 mm socket caps screws for the hinges 6x M3 nuts also for the hinges The 12 optional…
- Pobrania
- 246
- Polubienia
- 19
- Ocena
- 5
P
Printablesmarkusdd
Sunton 7inch Display Housing (ESP32-8048S070) with rounded corners
Like the original, but faceplate with rounded corners and even frame width
- Pobrania
- 241
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJacco
Cage + Top Handle for Sony A7IV and alike.
I've used it a few times right now, still happy with it! (UPDATE) I've added some pictures of it. Works great! Mostly connected by M5 bolts/nuts including washers to spread the load. Cage is 3 parts for easy printing. Handle is two parts…
- Pobrania
- 233
- Polubienia
- 29
- Ocena
- 0
P
PrintablesRayfor
Pentax 67 6x7 67ii Left hand grip
Pentax 67 6x7 67ii Left hand grip
- Pobrania
- 219
- Polubienia
- 13
- Ocena
- 0
P
PrintablesHarry148
Pentax 67 lens rear cap (6x7, 67II)
A simple yet effective lens cap for all pentax 67 lenses! easy to print, nice and simple and quick. Even has pentax 67 written on the bottom of it. (if you forget what lenses its for) PLA but will work with any fillement 15 percent infill…
- Pobrania
- 209
- Polubienia
- 12
- Ocena
- 0
P
PrintablesStefanN
Sunton 7inch Display Housing (ESP32-8048S070) with Stand (FreeCAD)
The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…
- Pobrania
- 205
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMIRE
Table top housing for Waveshare ESP32-S3 7inch capacitive touch display
Table top housing for Waveshare ESP32-S3 7inch capacitive touch display https://www.amazon.de/gp/product/B0D2NMCY7K I use it for OpenHASP with Home Assistant, in this case to mainly monitor solar panel power generation, batterie and…
- Pobrania
- 188
- Polubienia
- 15
- Ocena
- 0
P
PrintablesPaulygon
(Standard) HSW Irwin Quick Grip 7in Clamp Holder x4
Whoops, printed the original before I saw the orientation of their honeycombs. I changed the hole to use SHCS instead of FHCS (counterbored hole instead of countersunk). I also added 5 mm to the length so the clamps are less likely to…
- Pobrania
- 178
- Polubienia
- 19
- Ocena
- 5
P
PrintablesJulianB
Sunton 7inch Display Housing (ESP32-8048S070)
This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…
- Pobrania
- 178
- Polubienia
- 8
- Ocena
- 5
P
PrintablesMacNite
Duet PanelDue 7i for Voron and 2020 Extrusion
This is a quick mod I came up with to mount a genuine PanelDue 7i to the front of my Voron using the great work done by: Jurii (Thing 4555514) Tactical_Pickle_Gaming (Thing 2896405) LumberjackEngineering (Thing 2799628) driftology (Thing…
- Pobrania
- 177
- Polubienia
- 22
- Ocena
- 5
P
PrintablesJbcdu87
7inch Screen Casing
Basic Case for a 7inch IPS touch screen i found on amazon ( https://www.amazon.co.uk/gp/product/B07YJDSCKR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 ) Brand is Jun-Saxifragelec. Friend of mine bought from the same manufacturer and…
- Pobrania
- 173
- Polubienia
- 17
- Ocena
- 0
P
PrintablesFreek van der Horst
Yamaha XSR 700 7inch headlight
This is a headlight mount for the Yamaha XSR700, mine is a 2019 model. The print is made to fit the original mounting points / brackets and the original bolts. It is designed to (pressure) fit a 7 inch LED headlight. The front can be…
- Pobrania
- 171
- Polubienia
- 28
- Ocena
- 5
P
Printablestato_713
Motorola Moto E7 & E7i Power xt2052 case
Originally published here: (WIP) Motorola Moto E7 & E7i Power xt2052 case by tato_713 - Thingiverse This case was designed for the phone E7, E7 Power and E7i Power. It could be compatible too with the E7 Plus, but this one has a slightly…
- Pobrania
- 165
- Polubienia
- 5
- Ocena
- 5
P
PrintablesTad
HSW Irwin Quick Grip 7in Clamp Holder x4
Printed in PLA, 0.6 nozzle, 0.3mm layer height, no supports needed. Designed for M4 Inserts in HSW. PETG not really recommended, too flexible.
- Pobrania
- 162
- Polubienia
- 26
- Ocena
- 5
P
PrintablesMatty O
Raspberry Pi 7in display Case and stand
This case is for the new Raspberry Pi 7in display Works with the recommended assembly. No need to move parts around. Simply screws to the supplied brackets on the display. The back easily clicks off to allow access to the Pi. Great for…
- Pobrania
- 162
- Polubienia
- 29
- Ocena
- 5
P
PrintablesMitch 3D
Mesa 7i96 DIN Mount Plate
A DIN mountable adapter plate for a Mesa 7i96 CNC card. Designed for M3 threaded inserts. Uses this DIN rail clip using M4 screws. I only use two din rail clips on either side so I can release the clips with a flat head screw driver…
- Pobrania
- 154
- Polubienia
- 7
- Ocena
- 0
P
Printablesbostwickenator
Sony A9 & A7iii grip extension
A longer grip for the Sony A9 and A7iii. Through-hole to allow for the battery to be changed while the grip is on the camera. https://www.shapeways.com/product/3RS4675J9/sony-a7iii-a7riii-a9-grip-extension Category: Camera
- Pobrania
- 151
- Polubienia
- 21
- Ocena
- 5
P
PrintablesDendy
Printable parts for GEPRC MK4 7in FPV drone frame
Frame: Mark4 7inch ( https://www.aliexpress.com/item/1005007050126436.html?spm=a2g0o.order_list.order_list_main.33.1d911802EmF5cR ) Not a add Camera system: Walksnail Moonlight 4k kit. GPS: BN-220 Stack: 4in1 ESC + F405 FC Material:…
- Pobrania
- 144
- Polubienia
- 13
- Ocena
- 0
P
PrintablesGalaktik Enver Paşa
Sony A7III / A7R III Comfortable Grip with bottom riser
V2 version is grips the bottom plate better. I Recommend: %35 Gyroid infill For 0.4 Nozzle 0.08 XY contour compensetion. 0.2mm Layer Height Fuzzy Skin You can use long shaft 1/4 metal screw or you can print one.
- Pobrania
- 135
- Polubienia
- 14
- Ocena
- 0
P
PrintablesDee
BMD 7inch video assist stand
Update: Have tested it and found a few parts are not strong enough - redesigned slightly and changed the orientation of the print to solidify it more.
- Pobrania
- 135
- Polubienia
- 12
- Ocena
- 0
P
PrintablesKyle3909
Simple 7in Diameter Plant Trellis
This is a simple 7in diameter and .2in plant trellis. Works great with Hoya plants but will also work with other plants.
- Pobrania
- 132
- Polubienia
- 17
- Ocena
- 5
P
PrintablesMatt - GlitchTech
Raspberry Pi 7in Touchscreen Enclosure
Turn your Raspberry Pi 2 and Raspberry Pi 7" Touchscreen into a completely custom tablet. This design is still a work in progress. Cable lengths and required hardware have not been tested/determined. Work is still on going to find a…
- Pobrania
- 129
- Polubienia
- 19
- Ocena
- 0
P
PrintablesEhayoung
Lenovo Legion 7i Pro Gen 8 Under Desk Laptop Mount
My first uploaded model and one of my first models. I included a bunch of file types because I'm not sure what will be the most useful. Made to be printed twice, once mirrored for the other side. I wanted to secure my laptop to the desk…
- Pobrania
- 124
- Polubienia
- 14
- Ocena
- 0
P
PrintablesNarlyB
Sony a77IIDisplay Sun Shield
A sun shield that slips on and off with ease. Print instructions I printed this with Prusament Galaxy Black No supports needed
- Pobrania
- 118
- Polubienia
- 23
- Ocena
- 2
P
PrintablesJonathan Senkerik
ESP32-C6 1.47inch Display Enclosure
The Waveshare ESP32-C6-LCD-1.47-M (ESP32-C6 1.47inch Display) is a really cool easy to use iot device. This basic enclosure lets you place it just about anywhere. I printed it in white PLA so the multicolor LED under the display really…
- Pobrania
- 115
- Polubienia
- 9
- Ocena
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka AKAI - AMS
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Pobrania
- 111
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRoart
7in Bowens Reflector with Diffuser and Grid
7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Reflector best printed in black and painted white, gold or chrome inside!…
- Pobrania
- 109
- Polubienia
- 15
- Ocena
- 0
P
PrintablesMakerJim
Case for ESP32-C6 1.47inch Board
A tight fitting case for the Waveshare ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-Core Processor (Amazon 2025/12). Every case I found that matched this description was way too long…
- Pobrania
- 107
- Polubienia
- 8
- Ocena
- 0
P
PrintablesKaworu
Intel NUC NUC7I5DN Case
Case for the NUC7I5DN Intel NUC motherboard, which along 8G of RAM and 64G SSD i could source for like 25$. Sadly they didn't come with a case, so made my own. Notes: Feet required, air intake is on the bottom, so we could have some…
- Pobrania
- 106
- Polubienia
- 8
- Ocena
- 5
P
PrintablesAdam
Pegboard mount for 7in/180mm Knipex Pliers Wrench 86 03 180 - Magnetic
Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. Printing You do not need supports for the hexagon hones, this was able to be printed…
- Pobrania
- 106
- Polubienia
- 12
- Ocena
- 5
P
PrintablesSeweryn
Lenovo Legion 7i
Easy and fast to print stand for laptop Lenovo Legion 7i better cooling and more space on desk
- Pobrania
- 105
- Polubienia
- 20
- Ocena
- 4
P
PrintablesWhatWouldAnEngineerDo
Cases kit for Geekpi 7inch Portable Screen V2 (52Pi EP-0186) with attached Pi3b+ or Pi4b
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
- Pobrania
- 102
- Polubienia
- 10
- Ocena
- 0
P
PrintablesProfHankD
Kiev 10/15 Lens To Sony A7II-series Body Adapter
The Kiev 10 was the first Soviet-built 35mm SLR with automatic exposure. Of course, it really comes from Ukraine, so if it were being made now we would spell it Kyiv. Automatic exposure was accomplished using an internal linkage for the…
- Pobrania
- 100
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMegaCadler
Case for Raspberry Pi with 7inch HDMI Display
A case for Raspberry Pi with 7" 800x480 LCD and HDMI cable. The viewing angle can be changed with the back stand. Holes on the back side provide cooling air as well as access to Raspi Pins and SD card. The side cap can be removed to plug…
- Pobrania
- 94
- Polubienia
- 8
- Ocena
- 0
P
PrintablesEm Jay
Nikon Z 6 / Z 7 /Z 6II / Z 7II Sub-Selector FixRing
A ring to fix the joystick, sub selector on your Nikon Z6/7. The button can still be pressed, but the ring prevents the focus field from being accidentally moved. It sits firmly in place, but can be easily removed with your fingernail. To…
- Pobrania
- 94
- Polubienia
- 8
- Ocena
- 4,67
P
Printablesbostwickenator
Sony A7ii Grip Extension
This is a grip extension for the Sony A7ii. It gives you that little extra hand position when handling big lenses Category: Camera
- Pobrania
- 89
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSunny Galli
Geeekpi 7in HDMI Touchscreen
This is a case and stand for the geeekpi 7in HDMI display. It sits at a 45 degree angle. Two model available, one that uses a 2mm heat set insert, the other for 2.5mm self tapping, to mount a pi to the back off the display. Feet Screws-…
- Pobrania
- 87
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSurgeLight3d
Lenovo Legion Pro 7i Gen10 Riser Feet (snap-on)
Elevate Your Lenovo Legion Pro 7i Gen10 with Snap-On Feet! Enhance your laptop's performance and comfort with these custom-designed snap-on feet for the Lenovo Legion Pro 7i . These feet elevate the back of your laptop slightly, promoting…
- Pobrania
- 84
- Polubienia
- 7
- Ocena
- 5
P
PrintablesZimmy
Sony A7III Extension Grip Compatible With Peak Design Capture
Sony A7III Grip Compatible with Peak Design Capture It's really simple accessory, because for someone with thicker fingers it's hard to reach the release button, but it works for me. So it's worth printing, if find the grip on Sony A7III…
- Pobrania
- 84
- Polubienia
- 12
- Ocena
- 0
P
Printablesthemasterofunlocking
Santoku Knife Sheath (7in / 178mm blade or slightly larger)
Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade. This project requires: [7x] m3x5x4 heatset inserts [voron spec]…
- Pobrania
- 83
- Polubienia
- 16
- Ocena
- 0
P
Printablesschochk
PanelDue 7i Cover for CaribouDuet
PanelDue 7i Cover for CaribouDuet This Display Cover attaches the PanelDue 7i to the front of the CaribouDuet 3D-Printer. Print instructions 0.2mm layer height 20% infill No Supports needed
- Pobrania
- 81
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSchandi
Remix for Waveshare 7inch Display
Casebody for Waveshare 7 inch Display. https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C) Only small changes to fit the different Positions of OnOff switch, HDMI Port and a bit space for the electronic on the rear side.
- Pobrania
- 80
- Polubienia
- 9
- Ocena
- 0
P
Printablesamckimmey
Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft
Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft I bought from Harbor Freight the Chicago Electric 100 lb. Capacity Welding Cart, simple cart, but wanted to stabilize and space out my welding gas cylinder. I designed this to…
- Pobrania
- 79
- Polubienia
- 26
- Ocena
- 0
P
Printablesinvictus0x0
10 inch Rack frame for 7in touch screen
This is 10 inch Rack frame to mount the cheap 7in touch screen from AliExpress. the ones like these, https://www.aliexpress.us/item/3256807246146590.html lcd is attached with m3 screw directly into the plastic. there are two versions…
- Pobrania
- 76
- Polubienia
- 7
- Ocena
- 0
P
Printablesideat0m
Reel2Reel empty spool 7in/18cm NAB - aka Sony -AMS
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Pobrania
- 74
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAxolito
MESA 7i96S DIN mount plate
This is a plate for mounting a MESA 7i96S board (and perhaps other similar models) on a DIN rail. This plate has been designed to be laser-cut, but it can also be 3D printed. Please note that this plate is designed to be mounted on this…
- Pobrania
- 73
- Polubienia
- 5
- Ocena
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka Pioneer - Multicolor - for NAB
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "NAB" and a diameter of 18 cm. I would like to point out that this is a cosmetic issue,…
- Pobrania
- 73
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRoart
7in bowens Lantern
7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Lanterns can be printed in White, or ANY color! Settings Lanterns - 2 walls 10% infill
- Pobrania
- 69
- Polubienia
- 15
- Ocena
- 5
P
PrintablesDendy
Source One V6 7in DC STEP file
STEP model based on official drawing. Download official printable parts from: https://github.com/tbs-trappy/source_one
- Pobrania
- 69
- Polubienia
- 1
- Ocena
- 0
P
PrintablesProfHankD
Topcon UV Topcor Lens To Sony A7II-series Body Adapter
Topcon is a highly respected Japanese optical company now known for opthalmic equipment, but for a while they made cameras and lenses. The Topcon RE lenses, which use a slightly modified Exakta mount, are exceptionally good. However,…
- Pobrania
- 67
- Polubienia
- 8
- Ocena
- 0
P
Printableszane beck
7in klipper screen case
here is a case and mount for a 7 in display for klipper screen. it comes in 2 options. 1 is a vertical case and one is a horizontal case or vise verse if you want to mount on top or bottom. i made it so it can be mounted anywhere on the…
- Pobrania
- 66
- Polubienia
- 15
- Ocena
- 0
P
PrintablesAaroooooon
Nikon Z 7II 2.71:1 Aspect ratio cover - XPAN crop
A cover to simulate the crop of an xpan at 2.71:1. To get the best results with this cover, you should use in combination with a 28mm lens. Here's a video that briefly explains why 28mm Have fun! :) Something to note is that the screen…
- Pobrania
- 64
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNicerdicer
open case with stand for 7inch display raspberry pi 4
I was looking for a more stable stand for my Raspberry 4, which is connected directly to the 7 inch WIMAXIT screen. Unfortunately, I couldn't find exactly what I wanted, so I modeled a suitable stand myself. The stand is an addition to…
- Pobrania
- 64
- Polubienia
- 11
- Ocena
- 0
P
PrintablesActoreX
Mark4 7inch Clone DJI O4 Lite Camera Holder
Created camera holder for DJI O4 Air Unit (lite). I used spare silicon inserts (from Volador VX35 build) - you can print 2x bumpers as substitution (scale it accordingly in a slicer) and print it with soft material like TPU. I used 4x…
- Pobrania
- 63
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLow-Z
18cm/7inch audio tape reel mmu or single color print created in OpenSCAD
This is my try to create 18cm/7inch audio tape reels. There are stl-files attache for different designs (0,2,7). The 3mf-files are a selection of designs i put together on two print plates each. If you want to print the non preconverted…
- Pobrania
- 62
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMakealot
Kids 7in Bongo Drum
This is a simple 7in bongo drum with a 0.8 mm thick drum surface. Print upside down at 0.2mm layer height with 4 bottom layers to have a solid drum surface. The rest can be printed at whatever infill density desired. Enjoy!
- Pobrania
- 60
- Polubienia
- 6
- Ocena
- 5
P
Printablestomk0014
Raspberry Pi 4 with a 7inch touchscreen
A basic cover + case design for a 7inch touchscreen from FreeNove with a Raspberry Pi 4. Requires 4 long screws at each corner to secure the cover to the case. I made some holes in the case so that you can pass some cables through it to…
- Pobrania
- 60
- Polubienia
- 2
- Ocena
- 0
P
Printableshesselharmsen
Display Holder for 7inch HDMI-display
This 7inch Display Holder is for the very popular Hosyond 7inch display, especially made for the Raspberry PI. I used this for adding an additional display in one of our Photobooth products. The display is placed in the side of an old 60s…
- Pobrania
- 60
- Polubienia
- 3
- Ocena
- 0
P
Printablesideat0m
Reel2Reel empty spool 7inch / 18cm, aka Pioneer - Multicolor - for Trident
This is a cosmetic! Replica. This is an empty spool for tape recorders (reel2reel). With the possibility of being mounted on a running board with a "Trident or a Star" and a diameter of 18 cm. I would like to point out that this is a…
- Pobrania
- 59
- Polubienia
- 7
- Ocena
- 0
P
Printablesjambeers
Pivoting Raspberry Pi 7inch Screen Mount
Simple pivoting mount for the offical 7inch raspberry pi touch screen [https://www.raspberrypi.com/products/raspberry-pi-touch-display/]. Perfect for your klipper screen UI or other pi projects. Pivot mount designed to fit on the leg of…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMiniPrinter
Wall Display / Case for Raspberry Pi with 7inch display
Case for a Raspberry Pi with the original 7inch display. Can be wall mounted or stand on a desk. I used https://www.printables.com/model/727545-raspberry-pi-4/files to model the case around it. Thank you @print_byte for providing the step…
- Pobrania
- 56
- Polubienia
- 14
- Ocena
- 5
P
PrintablesNick Sparrow
7inch Monitor Arm Desk Clamp
Found myself working on quite a few SBCs recently and instead of having to pull out a monitor every time I wanted to take a look at what the machine was outputting, figured I'd mount a small monitor to my desk. However, after some…
- Pobrania
- 56
- Polubienia
- 10
- Ocena
- 0
P
Printablescere19
Mesa 7i96 Card Mount
I'm building a CNC Plasma cutter and using a Mesa 7i96 card for my motion control. Needed something to keep the card separated off the metal enclosure I'm using so I designed this card mount. The 6 card supports are designed tight to…
- Pobrania
- 55
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMupshot
tbs sourceone 7in.V3 2.4. (ELRS, Ghost etc) antenna mount
T antenna holder for any 2.4gh control link. This will fit any frame with 30mm standoffs, but specifically made to fit the source one 7inch V3 frame. March 28 update: 6mm standoff version added
- Pobrania
- 52
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCaitlin
PanelDue 7i Case for the Railcore II
This is my simple PanelDue 7i case for the Railcore II. The screen will be 0.5 mm recessed from the front but other then that everything should be flush with everything. The used M3x18 screws but any 3mmx18mm screws and hex bolts should…
- Pobrania
- 49
- Polubienia
- 1
- Ocena
- 0
P
Printableseyefly
Tubular 7inch frame - superlight and superstiff - no CNC needed
Update 03.05.22: I beefed up the clamps a bit, so they are more rigid (parts 01-04). Rest has not changed. Note: This frame is work-in-progress. While the basic principle has proven to work perfectly, the "official" 7" version i'm still…
- Pobrania
- 48
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJohnMartin
HSW - QUINN 7in. Self Adjusting Pliers (Harbor Freight)
Honeycomb wall holder for QUINN 7in. Self Adjusting Pliers
- Pobrania
- 47
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRISMcz
laptop cooler 17inch 120mm fan
Laptop cooler 17 inch, in the back is room for 3x 120x25 mm fan There is room for some foam to seal the air to go trough the laptop and not around that will improve performance Now it is ready to print. I will be posting cooler for 16inch…
- Pobrania
- 47
- Polubienia
- 11
- Ocena
- 0
P
PrintablesGary Lin
Mamiya 7/Mamiya 7ii 80mm f4 lens hood
This is a remix of the Mamiya 6 50mm lens hood by August DeHainaut. A quick thanks to Reddit user u/bacchus10 for providing the dimensions of the original Mamiya lens hood. The reason that the Mamiya 6 50mm lens hood was chosen as the…
- Pobrania
- 45
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFloppy Lab
Batteria esterna SONY A7II
Batteria estesa SONY A7II per allungare il tempo di utilizzo della fotocamera con una carica sola. Questo progetto è stato trattato sul mio canale YouTube "Floppy Lab", dove c'è il tutorial completo di come assemblare il tutto e il…
- Pobrania
- 45
- Polubienia
- 14
- Ocena
- 0
P
PrintablesNeufra
Improved PanelDue 7i case
You need: 4x M3x16 bolts (for connecting the front, back and the Panel Due together) 4x M4x10 bolts (for mounting the case to “multi joint hinge” by Tri_Engineer) https://www.printables.com/model/819263-multi-joint-hinge 4x M3 short or…
- Pobrania
- 45
- Polubienia
- 4
- Ocena
- 5
P
PrintablesGreg
MESA 7i76e Mount - Remix
Remix'd to use brass threaded inserts (M3 x 5mm x 4mm) for the PCB mounting screws.
- Pobrania
- 44
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPackalak
Revolver Stand for 7in revolver
It's a simple build. Use supports and at least 30% infill to ensure the integrity of the structure. Keep in a safe place. This is a presentation stand for a secure area. Don't print this and expect it to keep your revolver secure.
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 0
P
Printablesjimmyapage
27inch MTB Wheel Wall Mount
Simple bracket to mount MTB wheel to garage wall, radius to match wheel and sized to go between spokes
- Pobrania
- 43
- Polubienia
- 8
- Ocena
- 0
P
PrintablesHarry148
Takumar 75mm F/4.5 cap - Pentax 67, 6x7 67II lens cap
If you need a lens cap to go on the front of your Takumar 75mm F/4.5 then this fits perfectly and tight. I designed to be simple and easy to print too. It fits tightly on the front but you can still take it off without too much pressure.…
- Pobrania
- 43
- Polubienia
- 6
- Ocena
- 0
P
Printableskuhnikuehnast
Duet3D PanelDue 7i angled Case with integrated SD-Slot to mount on a 3030 Extrusion
This is a Case to mount the PanelDue 7i by Duet3D on a 3030 Extrusion. It is angled at 25° to give the best view when mounted. All buttons are accesible (reset; erase). The reset-button is easy to press and for the erase button, you will…
- Pobrania
- 42
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTodd Ferrante
Sony A7IV USB powered cooling fan
These two parts are used to mount a 40mm USB fan to cool a Sony A7IV camera. Assembly instructions in this video: These are printed from TPU .15mm layer height.
- Pobrania
- 40
- Polubienia
- 10
- Ocena
- 5
P
Printableskyleireland
Raspberry Pi Touch Display 7inch - Small Stand for Raspberry Pi - 40mm Fan Mount - Display Shell
I needed a Shell/Stand for the Raspberry Pi Touch Display so I decided to make this on Fusion360. This stand fits the Raspberry Pi 3 or Raspberry Pi 4 as they have the same mounting holes. You use the screws included with the Raspberry Pi…
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMariusz Waśkowiec
Raspberry Pi Zero Waveshare 7inch LCD case
Weather station source code: https://github.com/marwask/weather-station
- Pobrania
- 38
- Polubienia
- 12
- Ocena
- 0
P
PrintablesKipnugget
PanelDue 7i 2040 mount
Display mount for PanelDue 7i on 2040 extrusion. Cover is a remix of the original Prusa LCD cover, the lcd support brackets are remixed from the Prusa Bear design. LCD-cover-prusa-PanelDue7i: check the STEP file if the mounting holes line…
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 0
P
Printablessolaris2k
Jun-Electron 7inch Touch Display Stand
I made a basic stand for the Jun-Electron 7" Touch Display that I bought on Amazon. I'm not a fan of the folio case stand it comes with so this will replace it. You can use it with the screen alone with your PC or whatever or attach a…
- Pobrania
- 37
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLars Becker
Ikea skadis filament guidance M10 7in1
Latest Update: 13.04.2023 - filament stuck problem fixed the problem that the filament get stucked while trying to giude it through the model. About the model: This model is designed to merge seven PTFE tubes into a single tube, making it…
- Pobrania
- 36
- Polubienia
- 11
- Ocena
- 0
P
Printableswarpman
Waveshare ESP32-S3 7inch Capacitive Touch Display Case With Battery
A remix of the Waveshare ESP32-S3 7 inch Capacitive Touch Display Case but with a space in the back for a battery. Due to the space in the back for the battery the case is slightly thicker than the original. I also simply tapped the…
- Pobrania
- 35
- Polubienia
- 1
- Ocena
- 0
P
PrintablesConda
Tukkari Raspberry Pi 7inch Display mount
A simple remix of the Plate mounting bracket for 7" touchscreen case so it can be mounted on top of the Tukkari Printer enclosure. I printed it with Polyterra PLA and it works pretty good. No special settings needed.
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKuni
9.7inch iPad Pro Functional Stand
This is a stand that holds the screen keyboard of a iPad Pro 9.7 at a tap-friendly angle. Attach with spring-loaded pawls. And this has a mechanism to store the Apple Pencil and eject it by pressing a button. Errors in the model would be…
- Pobrania
- 35
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTri_Engineer
Duet3d PanelDue 7I Mount
This Mount is designed for my Multi Joined Hinge. https://www.printables.com/de/model/819263-multi-joint-hinge
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarla J.
left hand grip for sony a7iii smallrig L-bracket
A left hand grip you can mount on the smallrig L-bracket for the sony a7iii. Provides a symmetrical grip on the camera.
- Pobrania
- 33
- Polubienia
- 6
- Ocena
- 0