301 modeli
A simple mosaic inspired geometrical plant pot for your house plants! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print with 0 infill, 0 top layers, and 3 walls.
A hear a lot of compliments about our banner tile graphic so... Now you can enjoy it in as a pot design!! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Easy to print, customisable, nice and smooth. Change size and chamfer in slicer or onshape. Easy to play with no top or bottom walls.…
Each vase was printed with a .3mm layer height, 2 walls, and 5% infill. I attempted to print in vase mode unsuccessfully as it resulted in several holes in the print. Do not print in vase mode.
AICS Long Action magazine for 30-06 based cartridges. This is long action and will not work with 308 AICS rifles. Nor will it work with long action 300 win mag. There's not enough room to make the feed lips strong enough for 300 win mag.…
This model was printed at 30mm/s with a .2mm layer height in vase mode.
I originally found this model for free somewhere else. I don't remember where exactly and I can't find it anymore. When searching through yeggi, i think it's from cults, so i chose that as source, but it has been removed from there, so I…
AICS magazines are outragously expensive so I decided to make my own 3d printable version. I have a christinsian arms MPR this uses short action AICS pattern magazines. I modeled this magazine off a christinsian arms magazine. This should…
7 Sizes to choose from! No supports, scales up but probably not down. Tactile/fidget toy. Fun shapes and easy to print. My most flexible model so far! Check out the video!~~ See the whole collection here:…
Remix to 5 colours support free and printed. Time-lapse print video : https://youtu.be/0M-ffuzG0dc Subscribe and stay tuned for latest support free and multicolor stl remix! Category: Sculptures
Let's do multicolour now. You can print up to 9 colours with MMU2S. https://youtu.be/uNqqN5Ao_hI Subscribe Now! A very good model from Velrock. Further remix to multicolour. Time-lapse print video : .https://youtu.be/uNqqN5Ao_hI Baby Yoda…
This is designed in order to facilitate the creation and hanging of mosaics from the 100hex project. Print instructions Category: Decor Summary This is designed in order to facilitate the creation and hanging of mosaics. It was…
I printed in PETG. A 0.2MM layer height leaves the top fairly rough, but it seems to feed well. I printed the sample in the picture with 15% infill and just 2 wall layers as a test. I'm planning to do another in 35-50% and 4 layers once I…
This is a PMAG 10 7.62 AC - AICS Short Action Safety Mag Block for rifles that use AICS mags. This one was designed for a Ruger Precision 6.5 creedmoor. Note: Tolerances on AICS mags and rifle mag block area very greatly between…
I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.
Low poly Raichu, the evolved form of Pikachu. A powerful Electric-type in polygonal style.
Uploading my TaiChi Stealthburner mod due to getting some interest on Reddit. I threw together some quick instructions but the CAD is also included if you want to see how it's assembled and what size of screws are needed/where to use…
vehicle or car scale model add on for aicraft painting stand https://www.printables.com/model/78565-aircraft-painting-s
This is a remix of a chamber flag by theDude8102. I raised the lip for the mag catch a bit better in my son's Voodoo, and lengthened the flag to make it easier to grasp. V2 file has the Coast Guard emblem, V4 file is plain without any…
This is a game piece box with a sliding lid. There are design options for the box bottom and lid to have a mosaic pattern or solid surfaces, and flat or concave/recessed faces (on the lid). All of the lids will fit either of the box…
This lids for various round plastic cups (yogurt, skyr, creme fraiche etc.) include cup sizes 75mm (200g), 94.5mm (500g) and 95.2mm (300g Aldi Körniger Frischkäse) and are designed for printing with TPU. The dimensions are defined so that…
Don't forget to like this model and sub my YouTube channel. Category: Sculptures
This is the missile of the F-302 from Stargate, designed by taichl. For easier printing I made some minor changes and integrated the support material in the STL file. You can remove the support material with a side cutter. For more…
Un papillon façon mosaique, puzzle ou géométrique, à accrocher au mur ou autre. A vous de jouer avec les couleurs suivant vos goûts et styles. Imprimé avec une hauteur de couche à 0.2 et 20% de remplissage. Faites un essai sur un morceau…
This model was printed at 30mm/s with a .2mm layer height in vase mode.
Ptolemaic Period Jewelry : Euclid's Cypher Ring.
Raichu model ripped from the Pokemon X/Y game files.
There are two configurations of this model you can make. Each one will require six bottom panels and six top panels. Tree supports were used when printing the lamp center part. I would suggest using z-hop when printing the frame part.…
This is an insert / organizer for Azul with the Crystal Mosaic player boards, the Special Factories promo, and the Joker Tiles promo. It has no lid lift, supports vertical storage, and was designed to aid setup and teardown. I was not in…
This wall hook is compatible with piece 67139 which is used as a hanger bracket by LEGO's line of dot mosaic art sets. Hanger Hook I printed these standing up on their bottom end with a raft just to be on the safe side. This hanger…
A stand to prevent the inhaler from tipping over. In order for the front foot of the inhaler to reach all the way to the bottom, use a hair dryer to soften the plastic a bit and shape it exactly when you put the inhaler on. Stojánek pro…
This model i made from using the design from Sebaho on Cults3D and turned this into a multicolor design to use on the MMU or mosaic palette i used normal black and red, silk Blue, Silk Gold, Silver for this print i printed these with 0.25…
Company welcoming wall mosaic. The original piece is placed on the wall in Prusa front desk / Prague. It is fully 3D printed from white and black PLA material. Postproduction was made by filling spray and iron look color spray. I scaled…
Drains the water and flowting dirt of your low inclined Photovoltaik modules. Choose according to the hight of your pv- modules 30mm/35mm/40mm. Test and pictures will follow. PETG or ASA is recomended because of the UV exposure.
6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…
Because the Lego Mosaic Maker (40179) doesn't come with a frame to hang it on a wall, I've created one myself. It exists out of 2 models. Corner, 4x Bar, 8x I've printed it in PETG and i only used a little support for the dovetail on the…
I think I'm addicted to making vases. So many possibilities. Lol Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2mm Infill: 0% Filament: ZIRO pla translucent Notes: No top layers in spiral…
Summary Keep your photovoltaic wiring neat, secure, and professional with these simple snap-on cable clips. Designed specifically for solar panel installations, these organizers help manage MC4-compatible solar cables and prevent loose…
Anillos de 17,2mm y 18,3mm usando un patrón rosca con simetrías para crear el mosaico en rombos. Nos encanta como ha quedado con la configuración de 0.12mm de altura de capa aunque con 0.16mm también queda genial y bajas tiempo de…
Wall art or pad with number mosaic design Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height 0,4 mm noozle Happy printing!
In my final setup I have a MK3S in a lack enclosure with a Mosaic Palette 2s Pro. In this configuration I put the Mosaic Palette 2s Pro in a top of the lack enclosure with a bottom up stand find on PrusaPrinterers or Thinghiverse. The…
This single feeder replaces the standard AICS short action magazine and allows for convenient single-round loading directly into the action. It is designed for shooters who intentionally run their rifle as a single-shot platform, for…
I present to you my very first 3D creation. The set consists of four cookie cutters. The cookies put together create a beautiful motif that will not only decorate your holiday table, but is also suitable for any special occasion. You can…
Changelog 24.09.2025: initial upload of the collection Requirements All lamps have a size of ~ 105mm x 105mm x 174mm, making them printable on almost all printers, even the Prusa Mini. Each lamp requires ~130g of filament (preferably PLA…
I wanted to decorate the hallway in our flat with some pictures. But as I continuously take new ones, and I don't want to get out the hammer and nails every time, I designed this modular picture frames. With this one you just need to…
Remove the insert provided with the Mosaic Palette 3 pro and insert it into your print. V2 of the clip has a filament guide and a slightly bigger hole for the filament to enter the extruder, I also added an inspedtion opening for the…
With a simple figure composed of 1 base body (normal and inverted) and 6 triangles we obtain a varied and colorful mosai
Developed for a friend who needed to organize his filament storage and feed solution on his palette 3 pro. USES PC4-6 fittings and normal PTFE 4MM OD, 3MM ID. Here are his sources.…
During looking forward of my arrival of my preordered Palette2, I was thinking about the management of my filament spools. I came up with a design for a modular spool holder, which I wanted to share with you. Features: Minimalistic design…
"What time is it? It's time for more filament!" A Ptolemaic clock is one where the face rotates and the hands remain fixed. Using an empty Prusament filament spool, you can print this stylish clock to decorate your print space. To…
Finto Caricatore compatibile con sistema AICS con funzione Safety Flag. La banda superiore sporge all'interno della camera dimostrando che è vuota. Nella parte inferiore è possibile attaccare un banner in tessuto all'anello da 4mm
Note 5/11/2024: I have added a “reinforced” version for TPU that adds a thicker lip to the pouch opening and a matching “rib” about ⅓ from bottom of pouch. Intent is to make pouch a bit stiffer and hold mag a bit more firmly. I have not…
I tried a few different Palette upside-down solutions to go on top of my lack enclosure, and found CarstenD's ( https://www.thingiverse.com/thing:3458138 ) to work the best. The angle it was tilted at combined with the height placed it at…
Adding on to the original 9 inch guard, and 4 inch guard available on Odysee for EZ22, here is a basic 6 inch variant. Compatible with EZ22 barrel nut, shared with Daichi barrel nut. Barrel Nut included for convenience, all credit goes to…
This is an insert for the retail edition, not the colossus edition! There are 3 lid for anything with the lid, you can choose the solid version, the hex version, and the hex with the text. You don't need all. player_bottom_x3 : 3 of this,…
An insert for the deluxe (Colossus) edition of Mosaic - A Story Of Civilization. I had some specific needs to address. First it had to fit in the box with NO LID LIFT. Second, it had to accommodate trade good tokens in coin capsules, and…
A simple PCIe slot cover that can be printed without supports. The airflow holes are modelled after the Selflock Mosaic pattern.
This innovative 3D printable wall art serves as both a striking decorative piece and an effective acoustic diffuser, perfect for enhancing the acoustics of any room while adding a touch of modern artistry. The design features a…
I printed this on .2mm layer height on my Bambu P1P and everything turned out great. When I first made it, it was 4mm too short so I have updated the files for uploading but other then that everything works great. The only thing that…
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
Remixed from my other stands for taichl's awesome Stargate model. I wanted a version that made it somewhat look like the gate was recessed into a floor.
Designed to allow full insertion of the bracket upside down with the corner cutout (the P3 has some internal steel bracketing that doesn't allow the normal stand profile to insert fully), and a small standoff supporting below the bracket…
Original model https://www.thingiverse.com/thing:4672484 I originally tried to paint this model in Prusa Slicer but there are a lot of nooks and crannies making it almost impossible to get 100% coverage. I separated out 44 different…
The MK4's filament input has some threads on the inside, this tool you can simply screw on that filament input and it sits tight! No supports needed. Please check / ensure that the hole is 6.15mm in diameter. Then simply put in the…
This set consists of eight cookie cutters. The cookies put together create a beautiful motif that will not only decorate your holiday table, but is also suitable for any special occasion. You can combine cutters with and without a cutout…
This innovative 3D printable wall art serves as both a striking decorative piece and an effective acoustic diffuser, perfect for enhancing the acoustics of any room while adding a touch of modern artistry. The design features a…
The Chapel of the Holy Sepulchre is a reminder of the place in Jerusalem where, according to tradition, Jesus Christ was laid after his crucifixion. The first temple was built over the Holy Sepulchre by Emperor Constantine in 326-335.…
The original design came from Flower Mosaic by Yuyuy75 - Thingiverse . I assembled the mosaic and then varied the height of the flowers so I could print it as a color print. Varying the height of the flowers also gave depth to the mosaic.…
This is a recreation of this object from the Metropolitan Museum of Art collection where I tried to match the size, faces and even orientation of the symbols as close to the original as possible. The original was crafted some time during…
Spanish Mosaic 4 Piece Wall hang. arround 14 by 14 inches square when combined. gcode inclued color changes at z height. Plan on doing an expoxy pour over the top as a test to see if a larger peice could be made into a table top. My idea…
Lion head - geometric mosaic
Caligula Pleasure Boat Mosaic. Here's a summary of the fascinating journey of the Caligula Pleasure Boat Mosaic: Origins: Imperial Pleasure Barges: The mosaic was originally part of one of two lavish pleasure barges built by the Roman…
I designed this grommet for use in the design phase of the Prusa Mini Palette adapter and never intended to print it, and then I found myself without any grommets. I did some work to make this more printable and made it in TPU. Then I…
Direct drive Phaetus Taichi and EBB CAN 42 mount for Sapphire plus SP-5. I used Sailfin extruders, since they have smallest footprint. Files can be found here . You will need two of them, normal and mirrored. Two pieces of bowden are…
Ankylosaur from late cretaceous Mongolia.
Gitter für Laichkästen. Maße des Gitters: 14,94cm x 93cm Zwei Versionen: 2mm und 2.5mm Breite zum “Durchfallen” der Babys Update: V2 enthält einen Griff in der Mitte zum leichteren herausheben. Tipp: 100% Infill, sonst treibt es oben.
I was looking for a top plug that I could use to guide my spools that I'm drying (with my Sunly Filament Dry-Box: https://www.printables.com/model/85989-sunlu-dryer-ptfe-adapter) nicely into the printer enclosure, and this for the M6x4…
If you like this model and want to see more, consider donating to my PayPal. https://www.paypal.me/Curtistomlin
Do you also have a great amount of samples lying around? Okay, you could print another boat with it.... Or, you use them to create a mosaic of your choise. I've used a programm called PicToBrick…
Using the Mosaic Palette 2 with my Prusa i3 Mk3S+ , I first tried one of the available extruder clips based on a rubber grommet. But like mmontminy , I found it not very secure. But I couldn't use his MK2.5s-MK3s Palette 2 Extruder Clip…
A case design for whowechina's AIC Pico, based off the real VFD Aime reader assembly. (outer measurements should be fairly accurate but missing mounting) NOTE THAT THIS DESIGN IS UNTESTED - PRINT AT YOUR OWN RISK The midframe is designed…
Three mosaic snakes (two colours) 20 cm, 10 cm - wall art, coaster, matrix for graphics or for frottage
Es ist ein Adapter, der leicht entfernt werden kann. Dies ermöglicht dann den normalen Druck ohne Palette. Eine 1/8 Zoll Armatur ist erforderlich, wo der Schlauch ganz durchgeschoben werden kann. Diese Armatur kann dann oben mit dem…
"Mosaic" 2D Wall decoration Use only one perimeter for optimal results.
Safety flag for AICS pattern 22LR bolt action rifles. I printed them in PLA and PETG in .2 structural 20% infill. Supports may be necessary under the magazine catch lug. If you print this and like it, please give it a like here.
HexaFlex is more than just a coaster – it’s a creative, movable mosaic to play with, customize, and make your own. Mix colors, link tiles, and shape your own movable mosaic. Each tile is a hexagon connected by small flexible links that…
The MK4's filament input has some threads on the inside, this tool you can simply screw on that filament input and it sits tight! When printing you should have a minimum of supports on the buildplate for the first ring to get over, the…
To my surprice I could still not find a cool PTFE to Palette2 connector. So I did. It's quite simple: you need a pneumatic connector, whose M6 thread is screwed onto the Pallete2 piece. And the rubber 'washer' given by mosaic. I cutted…
PETG 0.15 mm layers 0.4 mm nozzle 4 perimeters 6 bottom layers, 4 top layers 15 % infill (only affects the pull tab)
This is an adapter to work with the Artillery Sidewinder X1/X2 and the Genius. It allows you to mount the Bowden tube to all versions of the Mosaic Palette 2 and 3. To install you need to remove the short piece of PTFE tube that is above…
This is based on a 2,000-year-old game piece/artifact that comes from Ptolemaic Egypt.
This adapter allows you to mount a Palette 3 or Palette 3 Pro from Mosaic Manufacturing on standard VESA mounts for TVs and monitors. It is suitable for 100mm, 75mm and 50mm VESA mounts. It is designed for 12mm M3 screws and M3 nuts. I…
Un petit oiseau façon puzzle, géométrique ou mosaique à accrocher au mur, une fenêtre ou sur une porte. A vous de jouer avec les couleurs suivant vos goûts et styles. Imprimé avec une hauteur de couche à 0.2 et 20% de remplissage. Faites…
I was inspired by Matt Stultz background at the prusa live videocasts. Each tile will use a little less than 1 meter of filament. There are different tiles so you can get a clean outline or straighten the outer lines of your mosaic. You…
A quick, sub-1-hour print to test all extruders on the Prusa INDX upgrade for CORE One+. Print at a 0.2mm layer height with a 0.4mm nozzle. There are two versions: 4T: Four colors (black outline, white cat/dog + 2 mosaic colors) 8T: Eight…
this retainer is used by the mosaic 3 (pro) if lost or defect u can print a spare one. i would recommend to print it in petg 0.15mm height. after printing use a 2mm drillbit to open up the hole a bit (not tomuch) print 2 on each side of…
