395 modeli
This is a recreation of the Octoprint Monitor Enclosure by Daeraxa ( https://www.printables.com/model/39752-octoprint-monitor-enclosure ) with two changes: The size/shape of the opening for the OLED screen, as well at the “spokes” for…
Addition Heads for use with dummy 13.
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ - Twitter & Instagram --- If you would like to show some support for my files, you can do so here:…
Edit: thanks to FB user Kevin, it’s confirmed that it works with NAs as well. Although you can see from the photo that the vent outmost ring is slightly smaller than NA’s factory opening. Shouldn’t affect functionality, but aesthetically…
I wasn't paying attention and put the wall anchor in the wrong cell… Printed a new variant of the 4-Insert Countersunk piece, with the attachment portion in a different location. I believe between the original and this modification, all…
A Fully encased forearm and Shin for Dummy 13. New simple Look Fully covers arm/leg frames Snug fit (If print fails in the vertical position, print horizontally on the bed)
EDITED: 11/1/2022 - I added a one piece bottom - BOTTOMasONEpieceREVISED-STL0 . I have not tested this personally as I don't have a printer big enough to fit it. If you print it, let me know how it goes and I might be able to adjust it if…
I ran the printer for a while without the filament guide, and when retracting, it made the spool bounce around a little more than I was comfortable with. I built this as an alternative to the top guide provided with the printer. You can…
My first attempt at modeling/remixes. I wanted to change up the K9 companion (by TClear) so that I could have little robo versions of my real life cat and dog. Printed a quick prototype in generic PLA, .20mm layer height with 15% gyroid…
I didn't have any screws lying around for the printhead mount so I moved it to a place where I could reuse the screws. Also changed the ADXL clasp so that it can accommodate a bare ADXL345 board with soldered on pin headers. I printed…
This model is compatible with the lego system.
I wanted a slim sheath for Tea Break Gaming's Utilty Knife MK2. My own testing proves them to be quite secure. If you want a tighter "fit" you can use heat to gently bend the retention tab at the back of the sheath, tune it to desired…
I like this drybox, except I find that the slit for filament exit opens up the drybox too much to the environment and reduces the life/duration of the desiccant - and it stops working and needs to be renewed (the RH rises back to match…
Alternative pose, as requested by stark002. difference between 3 files: just mouth Category: Creatures
The Print-in-Place Twisty Puzzle is solvable without using extreme force. However, some prints may result in tighter clearances and broken keys. These alternate keys are tougher and should be used for tight prints or when puzzle solvers…
7 alternate heads for Dummy 13 1.0!
I found that the QIDI design caused jamming issues and there was a need for a filament guide. This is my attempt, set to accept a 19.75mm Bowden fitting that I had from my other 3d printer. Included as a OBJ file as it is better to export…
Files included: Goodra: It's a Goodra sculpt with 3 holes for pegs under its feet for a base. It is not balanced to stand on its own. Supports and hollowing(if you want) are up to you. Goodra PokeBall Base: A base for the Goodra in the…
This fan duct directs air in front of and behind the nozzle with three separate air streams for more even cooling and better overhangs on all sides of the nozzle. Works well for me between 20 and 40% fan speed for most models. My…
Georgia Bulldogs Alternate Oversized Necklace Logo that I designed. I hope that you enjoy!
In case you broke your original. Print in ASA or CF Nylon for high heat enviroments
Alternate fasciae. Purely aesthetic modifications, the F3 one was tested to have no measurable change on the frequency response, and the others all have comparable/more open area so should similarly have no effect. All should be printed…
The original ring of this model was taken from a Stargate model and has a bit too much superflous detail for the size it is printed on in my opinion (and always resulted in suboptimal prints for me). Which is why I designed a simpler…
This is alternative design for ECC door and top cover handle. Print without supports. 17.02.2026 - updated reinforced version - thicker walls,
Having my M5C in an enclosure, where the enclosure sits on its side, I didn't have enough room to run the OEM spool-holder arm in the original upright/vertical position, as it was too high. So I installed the arm horizontally which works…
You'll need 2x M3x5 screws, 27 x 693-ZZ bearings and 2x bolts for each roller. Very easy to assemble. I made different variations that works well for me, I use one or another depending the spool used. Rollers are 12mm wide, and sadly not…
I made this long buffer as an alternative to the bulky buffer plates for the MMU3. It’s designed to slot in the removable pieces included in the new buffer design. For the wheel and segment construction, you can find the stls here -…
Remixed so there is no gluing involved. Print and push onto the axel rod.
Spare standard nerf head or a pointed nerf head. Note- Glue may be required
This is a storage box, to store 50 22LR cartridges. The box is a very simplistic design, but it incorporates a smart layer, that will elevate every alternate row of cartridges such that it becomes easier to pick the cartridges from the…
Kansas City Chiefs Alternate Logo 1st Layer - Yellow 2nd - Red 3rd - White 4th - Black
This box is made for the BTT sk2 and the PI 3 A proposed by Rat Rig in the full kit. You can reuse the 4010 fan and the Cable passthrough part. to assemble you need brass inserts for 3mm screws. Also to have a more compact machine I use…
I struggled with alignment issues when putting together my first Ender 3 NG, having used RH3D's drill guides with a drill press and not managed to get the hole alignment quite perfect. Having seen Elliot's design I thought that might make…
Work in progress, don't expect this to work without modification Post a comment if you see a better way to do this. The idea is to spread friction across the entire surface of the spool so it doesn’t saw through the PLA as quickly. With…
I remixed the standard basincover to save some material and to have the ability to use every material for it, instead of only transparent ones. To close the cover, i use kitchen foil. I just printed it with PLA in the .3 Draft MK3 profil.
I printed the Darth Vader Headphone Stand but it was too short for my headphones (I was afraid the cable will get damaged) and it felt a bit unstable. There was a bigger version but I already printed the head and it was a perfect fit for…
Yet another 3x shell. Unlike many versions with separate chambers, this one keeps the chambers together so you don't have inconsistent performance between darts when all the pressure escapes before every dart exits, as well as slightly…
I printed the wheel parts at 20% with 4 perimeters, @ .2 layer height. The three pieces for the wheels are a pretty snug fit. I actually used some automotive sockets and a mallet to tap into place, but the parts held up just fine.
I was inspired to make these models based on ballanux's Non-rotating helical focuser and Max's compatible locking nut . There were a few considerations that led to my design choices, the first of which deals with tolerances. I'm not sure…
Philadelphia Phillies Oversized Necklace Alternate Logo that I designed. I hope that you enjoy!
Simple alternate coins (nickel & dime) for Binding of Isaac: Four Souls card game. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Filament: Prusament PLA Silver Notes: Depending on…
This is a remix of the base for the Desktop Neon Sign by DIY Machines that simplifies the electronics components and allows the use of a simple circular toggle switch and a USB powered neon LED light strip. This remix will work with any…
Leedle's BCAR adapted to friction fit over 16mm barrels, and alternate V shaped rollers (same size and larger). Some models require 10% scaling -v2 has bits to better friction fit over barrels so you can forego tape
Hello, Thank you for looking at my very first public project. I have imported this from Thingiverse, but it is not an abandoned project. I DO plan to continue it, it is a labor of love and takes a lot of time. These files have not been…
Just some alternate designs meant to keep the original design in mind with just some minor tweaks... Gaming PC - 4 slots Server - 7 slots Server Cabinet - 28 slots Server Room - 84 slots Category: Tool Holders & Boxes
Notre Dame Fighting Irish Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
An alternate kneecap for the amazing Lucky 13 figure. Huge thanks to soozafone for making this wonderful figure!
Works for V1 and V2 This is a TPU alternate for the hard to get Threaded Rubber Bumper. Do not screw this in! (although it does have a thread) pull the plug through using the long thin part until flush. Then cut off the excess with your…
The circlip that came with the original design ( https://www.thingiverse.com/thing:2670620 ) had a habit of getting pushed out of position when tightening he jaws. So I designed this alternate part that can be tightened in place to keep…
This alternate mount offers a screw-down option for the “CZFA_FlexFrame_BaseA_part1” of the original model. It fits the standard CZFA_FlexFrame_BaseA_part2 inside it, and can be screwed down to any surface with four #6 or #8 wood screws.…
Los Angeles Dodgers Alternate Oversized Necklace Logo that I designed. I hope that you enjoy!
I am a big fan of the Organic chess pieces but I've made my own queen piece from scratch in a more traditional shape, but also it in the same style so there is an option when printing the set. This one is also a little thicker, the queen…
Basically just rotated the entry points on the mid-section. I'm using this with the top-section from https://www.printables.com/model/81748-remix-mmu2s-buffer-inspired-by-rmu-buffer with ptfe connectors to the top (see 3rd photo) This…
An alternate cap for the (static) Electrical Grass Applicator. I prefer a metal mesh as opposed to PLA. Print instructions Print this piece out, Cut some screen mesh to fit on the interior lip. seal with hot glue and screw on Grass…
Rear wheel well fully redesigned from new sketches to match side skirt mounting holes on original design. More strength, and allows more room fore and aft of the tire to prevent rubbing. Front deflector includes additional mounting point…
I wanted to replace the static XL Spool Holders with a holder that incorporates some bearings. It's useful for both holding a spool directly, or when feeding filament directly from my filament dryer. The design uses two 608 bearings that…
agmcmll created this amazing router plane: Ajustable Router Plane by agmcmll . It's designed to easily accommodate different chisel sizes--so I'm sharing the channels I had to create for my own tools. I have a Narex ¼" and an ancient…
This is an alternate playing pawn for the excellent fully 3D Printed game Can't Stop by Kyle Kindle . Fits and stacks perfectly! I found and downloaded another version (that I can't find anymore) but it didn't quite fit, so I designed…
I wanted to be able to push the bottom up to get the plant out. The pot sits lower, making there be less dirt which is fine. You can also put the pot walls on top of the bottom if you wanted to. The top has squares removed to allow more…
This alternate catch and plunger rod system allows you to not need the metal plunger core that is standard with the zinc. I did this so I could more easily source my own zinc hardware as that plunger core is some non standard piece of…
My alternate version of the rubber wiper with 3 sharp edge brushes and vertical sides.
Very simple alteration of the original files to add more tactics to the slab. I used this model by sigstoat for the rail parts and made the dartholders myself in fusion360. The slab files are from sillybutt's github page The picatinny…
Changed first plate of RDR2 Shadowbox to be Arthur on horse. Swap it or use both.
I initially printed the parts for this press while I was waiting for the hardware to show up. When it did, I discovered that the threaded inserts I had bought were a smaller OD than the parts were designed for, and they would drop right…
An alternate pose for the sullustan miniature, suitable for tabletop gaming. Print instructions Category: Creatures
Really nothing too special, the original model has a house part and a base part, the base part has a little wall that makes the ‘door’ a bit smaller. If you try to scale the model to make it a bit larger than you might want to have the…
This model prints well with PETG and just 3 layers at 0.3mm layer thickness does the trick. The grid comes off just stiff enough and bendy to be inserted into wall and snap back to flat. A brass wire or screw can be attached to grid to…
doomsey_162111's "MMU3 Alternate cassette" design but updated with the R4 version for MK4/S/Core One compatibility. R4 version of the cartridges sits further out as the MK4 extruder design requires more filament to be unloaded. M3 x 6mm…
Larger version so I could more fully use my available shelf space. These are based on Squirrelbrain's original concept, but created from scratch as a learning project since I'm new to 3D modeling. Printed on a Prusa MK4 using the default…
St Louis Cardinals Oversized Necklace Alternate Logo that I designed. I hope that you enjoy!
I believe the Aristocraft Alco (FA-1,FB-1,U25B, RS-3 and Lil Critter)stock journal boxes look a bit exaggerated so I've designed these more prototypical replacements. Direct replacement for part 22200-82 using existing screws. WARNING: Be…
Atlanta Braves Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
This is a minor change to the great battery holder posted by tandro. I updated it to Accommodate a different fuse holder Deeper wire channels between the positive and negative battery terminals that get connected to allow for the…
Alternate Panel Hinge Mechanism for lower Astromech Dome Panels. Designed as replacement for the standard rotating panel hinges. The movement of the panels here include a small horizontal movement to allow a smooth opening from a printed…
8/14/2024 I just finished upgrading my RatRig, and have made a few EVA 3 modifications. It was designed in the following Onshape document, which was copied from the EVA page. I've also copied the mesh files to Github, Thingiverse, and…
Hello everyone! This is a 3D printed replacement foregrip designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the foregrip was a little too slippery for my liking. Plus, after…
Hockey pucks of New York Islanders alternate logo Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
I'm doing a partial, self-sourced “MMU2.5” upgrade and it looks like the commonly available “ultimaker” collet (6mm diameter) doesn't fit the collet holes on the MMU3 (5mm). In addition, it seems difficult to source the required 8.5mm x…
I made the back of my 12428 shorter and designed another battery cover / spare wheel roof holder To be attached with small zipties, refer to the photo. When closed in clicks in between existing beams Category: R/C Vehicles
San Antonio Spurs Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
Boston Celtics Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
Slightly adjusted feet dimensions and handle design, more chamfers, less overhangs, should fit the sidepanels better.
Printed from PETG 0.4 mm nozzle, 15% cubic infill, 3 walls
Boston Red Sox Alternate Oversized Necklace Logo that I deigned. I hope you enjoy!
WARNING: I am not responsible if you destroy your dock. For this print to be useful the original dock has to be dismantled. This will most likely void any warranty you may have on it. Please be sure you know what you are doing before…
Houston Astros Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
Nebraska Cornhuskers Huskers Alternate Oversized Necklace Logo
Chicago Cubs Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
Overview This is a heavily modified version of the build plate holder that @ScottWolfs created for his original SKADIS mod. It was designed specifically to be used in combination with this Left side panel variation so that you can easily…
I wanted cheaper parts that I could easily source where I am, and modifying parts where necessary based on my experience putting it together. I am not using all parts used in the original, just the basics. Printed on Prusa Core One with:…
This redesign of the Poorest Man Feeder: includes an integrated spool holder (and a version without a spool holder) sits lower on the 2020 extrusion than the original, giving nozzles more clearance provides a slot along the side for the…
A remix of the official Voron V0 Raspberry Pi Frame to allow mounting on the right side of the rear instead of the left. This makes the GPIO easier to access and allows for alternative wiring options.
Requires very precise player pieces storage, that's why my friends absolutely hate to gather it back after play. They call me sick if I wanted such precise storage solution :)
This model allows me to mount the Sim-Lab XP-1 Pedals Control Box on the end of 40 series profile on the pedal deck, instead of the bottom of the pedal deck.. This one-leg old man doesn't get up or down as easy as I use to, so I didn't…
Recreated lid for 50mm small variant with supports to hang box in the spool stored horizontally.
This was a remix of Nick1's alternate A-pillar to fit the Neptune 4 series printers. When using the included mounting block for the top of the gantry, the power and usb connections will point to the back of the machine instead of hanging…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Added a short thread to the Bottom Cap so the Cap can be put on the bottom without removing the Metal Mesh. Print instructions Place it on the print bed with the outer thread to the bottom side. To avoid having supports in the thread…
Arkansas Razorbacks Oversized Necklace Alternate Logo that I designed. I hope that you enjoy!
![#0022 [Remix] Spool Holder and Drybox for Enclosure V2 - with alternate filament exit ports](https://media.printables.com/media/prints/198823/images/2017437_6c3f2b55-1b8e-4cef-a443-c683df1a5573/drybox-mod-assy.jpg)
